New Principles of Ion-Exchange Techniques Suitable to Sample Preparation and Group Separation of Natural Products Prior to Liquid Chromatography

Abstract

A Gentle method of group separation of low molecular weight hydrophilic natural products is reported. The method is based on separation of the compounds according to their net charge at different pH values using different types of ion-exchange columns connected in series. Precolumns retaining interfering compounds are used in some cases. Elution of the compounds retained on the columns is performed by use of volatile eluents. The elution principle for two of the ion-exchangers in question is removal of the charges on the column materials while for the third column the positive net charge on the compounds retained is removed. Thereby, the total amount of ions retained on the different columns is released and eluted into small volumes, which after evaporation leaves the ions as well defined salts. The method is experimentally simple and efficient to separation of natural products into groups suitable to direct use in sensitive methods of analysis as e.g. high-performance liquid chromatography and gas chromatography. Combinations of these column chromatographic methods have been adpated for micro or semimicro determinations of naturally occurring compounds, e.g., aromatic choline esters, amines, amino acids and esters of phenolic carboxylic acids. The methods seem to be general practicable for group separation of low molecular weight hydrophilic compounds.     

工业制备高效液相色谱法制备淫羊藿中的黄酮系列对照品

淫羊藿甙和朝藿定A、B、C是淫羊藿中重要的活性成分,本研究应用工业制备高效液相色谱从淫羊藿粗提物中分离制备了这4个成分。淫羊藿粗提物经大孔吸附树脂粗分离获得相应的组分后,利用工业制备高效液相色谱完成精制纯化。采用自装填Chromatorex C18制备柱(220 mm×77 mm, 10 μm),乙腈-水(26:74或30:70, v/v)为流动相进行洗脱,在35 min内,实现了这4种成分的基线分离及规模制备。从300 g粗提物(总黄酮含量约20%)中获得淫羊藿甙33 g、朝藿定C 4.6 g、朝藿定B 3.7 g和朝藿定A 0.6 g,产品纯度均达到98%以上。此方法通过两步分离即可实现这4种成分的完全分离,具有快速高效、产品纯度高的特点,适于淫羊藿中淫羊藿甙、朝藿定A、B、C系列对照品的规模制备。     

Infrared methods for high throughput screening of metabolites: food and medical applications

Chemical and physiological properties are related to individual or bioactive compounds such as essential oils, terpenoids, flavonoids, volatile compounds and other chemicals which are present in natural products in low concentrations (e.g. ppm or ppb). For many years, classical separation, chromatographic and spectrometric techniques such as high performance liquid chromatography (HPLC), gas chromatography (GC), liquid chromatography (LC) and mass spectrometry (MS) have been used for the elucidation of isolated compounds from different matrices. Hence, the use of standard separation, chromatographic and spectrometric methods was found useful in chemical and both plant and animal physiology studies, for fingerprinting and comparing natural and synthetic samples, as well as to identify single active compounds. It has been generally accepted that a single analytical technique will not provide sufficient visualization of the metabolome, hence holistic techniques are needed for comprehensive analysis. In the last 40 years near infrared (NIR) spectroscopy became one of the most attractive and used methods of analyzing agricultural related products and plant materials which provide simultaneous, rapid and non-destructive quantitation of major. This technique has been reported to determine other minor compounds in plant materials such as volatile compounds and elements. The aim of this short review is to describe some recent applications of NIR spectroscopy combined with multivariate data analysis for high throughput screening of metabolites with an emphasis on food and medical applications.     

Application of Head-Space Analysis with Passive Adsorption for Forensic Purposes in the Automated Thermal Desorption-Gas Chromatography-Mass Spectrometry System

Offenders often use petroleum products as accelerants to commit an arson. A multi-component mixture of organic compounds isolated from the fire debris significantly differs from the initial one. These changes result from many factors, i.e. evaporation of the volatile components or presence of some organic compounds in the sample, which do not originate from the petroleum product (e.g. extinguishing medium components, products of pyrolysis of the burned material). The aim of presented research was to evaluate the influence of these factors. A series of experiments were carried out, and the analytical procedure was worked out. The headspace analysis with passive adsorption or the liquid extraction with ultrasonification was used for separation and concentration of the analytes. The mixture of organic compounds (accelerants, pollutants) was identified by the use of gas chromatography hyphenated with mass spectrometry. Principal component analysis (PCA) and likelihood ratio approach (LR) were applied to distinguish between evaporated samples of kerosene and diesel fuel. The elaborated procedure was verified both, witch inter-laboratory tests and using it for examinations of simulated fire debris.     

Dendritic aliphatic polyethers as high-loading soluble supports for carbonyl compounds and parallel membrane separation techniques

This paper describes the use of dendritic polyglycerol as a new high-loading polymeric support. The soluble polyether skeleton allows the parallel synthesis of small libraries on a large scale (1-5 mmol). Purification of polymer-bound products is easily achieved by a parallel dialysis apparatus, which was developed to separate up to 12 reaction mixtures simultaneously. The terminal 1,2-diol groups of polyglycerol (loading capacity: 4.1 mmol diol/g) can be directly coupled with carbonyl compounds without additional linker groups. At the same time the polyglycerol support acts as a polymeric ketal protecting group. The coupling of the carbonyl compounds occurs in high yields, and effective loading capacities of up to 3.5 mmol of ketone/g can be reached. The obtained polymeric acetals can easily be characterized by standard analytical techniques, such as NMR, IR, UV, and SEC. The versatility of this new polymeric support for solution-phase organic synthesis is demonstrated by two efficient polymer-supported syntheses: nucleophilic substitutions of gamma-chloroketones with amines and Suzuki-coupling on p-bromobenzaldehyde. The acid-catalyzed acetal cleavage with a solid-phase acidic ion-exchange resin in methanol demonstrates the orthogonal use of these soluble polymeric supports with conventional solid-phase reagents. Cleavage of products occurs in high yields, and almost complete recovery (>95%) of the polyglycerol support has been demonstrated after phase separation or ultrafiltration.     

Microemulsion and micellar electrokinetic chromatography of Hematoporphyrin D: a starting material of hematoporphyrin derivative

An investigation of the basic factors which govern the microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatography (MEKC) separation of Hematoporphyrin D and its base hydrolysis product, hematoporphyrin derivative (HpD), was performed. These model compounds contain a complex mixture of porphyrin monomers, dimers and/or oligomers, and were utilized to gain insights into the MEEKC/micellar electrokinetic chromatography (MEKC) separation of samples containing highly lipophilic substances. For example, the organic modifier/cosurfactant (1-butanol) and/or oil phase (e.g., 1-octanol in comparison to ethyl acetate) were found to have an apparent influence on the separation selectivity of Hematoporphyrin D, the extent of which was dependent on the chemical nature of the surfactant employed (e.g., sodium dodecyl sulfate vs. sodium cholate). An interesting and important finding was that the presence of an organic modifier (methanol or acetonitrile at a concentration of 20% or higher) in the sample matrix as well as in the run buffer was essential for the optimal MEEKC or MEKC separation of a number of porphyrin monomers (including hematoporphyrin IX and its acetates, most likely hydroxyacetate, diacetate, and vinyl acetate, as well as its dehydration products, hydroxyethylvinyldeuteroporphyrin and protoporphyrin) contained in Hematoporphyrin D. On the other hand, the use of these optimized conditions for the MEEKC or MEKC separation of various oligomeric porphyrin species in HpD were unsatisfactory. As HpD is a well-known and effective photosensitizing agent in photodynamic therapy (a new approach for cancer treatment), the improved separation and characterization of various monomeric and oligomeric porphyrin species in HpD and its starting material, such as Hematoporphyrin D, is a challenging and important task.     

Comparison of extraction methods for sampling of low molecular compounds in polymers degraded during recycling

The demand for mechanical recycling of plastic waste results in an increasing amount of recycled polymeric materials available for development of new products. In order for recycled materials to find their way into the material market, high quality is demanded. Thereby, a complete and closed loop of polymeric materials can be achieved successfully. The concept of high quality for recycled plastics imply that besides a pure fraction of e.g. polyethylene (PE) or polypropylene (PP), containing only minor trace amount of foreign plastics, knowledge is required about the type and amount of low molecular weight (LMW) compounds. During long-term use (service-life), products made of polymeric materials will undergo an often very slow degradation where a series of degradation products are formed, in parallel, additives incorporated in the matrix may also degrade. These compounds migrate at various rates to the surrounding environment. The release rate of LMW products from plastics depends on the initiation time of degradation and the degradation mechanisms. For polymers the formation of degradation products may be initiated already during processing, and subsequent use will add products coming from the surrounding environment, e.g. fragrance and aroma compounds from packaging. During recycling of plastics, emissions which contain a series of different LMW compounds may reach the environment leading to unwanted exposure to additives and their degradation residues as well as degradation products of polymers.Several extraction techniques are available for sampling of LMW compounds in polymers before chromatographic analysis. This paper reviews and compares polymer dissolution, accelerated solvent extraction (ASE), microwave assisted extraction (MAE), ultrasound assisted extraction (UAE), super critical fluid extraction (SFE), soxhlet extraction, head-space extraction (HS), head-space solid phase micro extraction (HS-SPME), and head-space stir bar sorptive extraction (HSSE) as appropriate sampling methods for LMW compounds in recycled polymers. Appropriate internal standards useful for these kinds of matrices were selected, which improved the possibility for later quantification. Based on the review of extraction methods, the most promising techniques were tested with industrially recycled samples of HDPE and PP and virgin HDPE and PP for method comparison.     

On the behaviour of the daughter species resulting from chelates by beta-decay in separation processes

The specific phenomena accompanying the daughter nuclide formation by radioactive β-decay of complex parent compounds cause certain deviations from a thermodynamic distribution of daughter elements in separation procedures (e.g. in radionuclidic generators) and they are shown to complicate or, less probably, simplify their separation. A simple kinetic model has been proposed to explain such processes as the distribution of some daughter nuclides of fission products by solvent extraction with chelating compounds (systems of⁹⁹Mo−^99mTc and¹⁴⁴Ce−¹⁴⁴Pr with oxines).     

Design of diverse and focused combinatorial libraries using an alternating algorithm

There is considerable research in chemistry to develop reaction conditions so that any of a very large number of reactants will successfully form new compounds, e.g. for two components, A(i) + B(j) --> A-B(ij). The numbers of A's and B's usually make it impossible to make all the possible products; with multicomponent reactions, there could easily be millions to billions of possible products. There is a need to identify subsets of reagents so that the resulting products have desirable predicted properties. Our idea is to select reactants sequentially and iteratively to optimize the evolving candidate library. The new Alternating Algorithm, AA, can be used for diversity, a space-filling design, or for a focused design, using either a near neighborhood or structure-activity relationship, SAR. A diversity design seeks to select compounds different from one another; a focused design seeks to find compounds similar to an active compound or compounds that follow a structure activity relationship. The benefit of the method is rapid computation of diversity or focused combinatorial chemical libraries.     

Optimization of a capillary zone electrophoresis–contactless conductivity detection method for the determination of nisin

Determination of natural preservatives using electrophoretic or chromatographic techniques in fermented milk products is a complex task due to the following reasons: (i) the concentrations of the analytes can be below the detection limits, (ii) complex matrix and comigrating/coeluting compounds in the sample can interfere with the analytes of the interest, (iii) low recovery of the analytes, and (iv) the necessity of complex sample preparation. The aim of this study was to apply capillary zone electrophoresis coupled with contactless conductivity detection for the separation and determination of nisin in fermented milk products. In this work, separation and determination of natural preservative–nisin in fermented milk products is described. Optimized conditions using capillary zone electrophoresis coupled with capacitance‐to‐digital technology based contactless conductivity detector and data conditioning, which filter the noise of the electropherogram adaptively to the peak migration time, allowed precise, accurate, sensitive (limit of quantification: 0.02 μg/mL), and most importantly requiring very minute sample preparation, determination of nisin. Sample preparation includes following steps: (i) extraction/dilution and (ii) centrifugation. This method was applied for the determination of nisin in real samples, i.e. fermented milk products. The values of different nisin forms were ranging from 0.056 ± 0.003 μg/mL to 9.307 ± 0.437 μg/g.     

Modern separation techniques for the efficient workup in organic synthesis

The shift of paradigm in combinatorial chemistry, from large compound libraries (of mixtures) on a small scale towards defined compound libraries where each compound is prepared in an individual well, has stimulated the search for alternative separation approaches. The key to a rapid and efficient synthesis is not only the parallel arrangement of reactions, but simple work-up procedures so as to circumvent time-consuming and laborious purification steps. During the initial development stages of combinatorial synthesis it was believed that rational synthesis of individual compounds could only be achieved by solid-phase strategies. However, there are a number of problems in solid-phase chemistry: most notably there is the need for a suitable linker unit, the limitation of the reaction conditions to certain solvents and reagents, and the heterogeneous reaction conditions. Further disadvantages are: the moderate loading capacities of the polymeric support and the limited stability of the solid support. In the last few years several new separation techniques have been developed. Depending on the chemical problem or the class of compounds to be prepared, one can choose from a whole array of different approaches. Most of these modern separation approaches rely on solution-phase chemistry, even though some of them use solid-phase resins as tools (for example, as scavengers). Several of these separation techniques are based on liquid-liquid phase separation, including ionic liquids, fluorous phases, and supercritical solvents. Besides being benign with respect to their environmental aspects, they also show a number of advantages with respect to the work-up procedures of organic reactions as well as simplicity in the isolation of products. Another set of separation strategies involves polymeric supports (for example, as scavengers or for cyclative cleavage), either as solid phases or as soluble polymeric supports. In contrast to solid-phase resins, soluble polymeric supports allow reactions to be performed under homogeneous conditions, which can be an important factor in catalysis. At the same time, a whole set of techniques has been developed for the separation of these soluble polymeric supports from small target molecules. Finally, miscellaneous separation techniques, such as phase-switchable tags for precipitation by chemical modification or magnetic beads, can accelerate the separation of compounds in a parallel format.     

Size-controlled nanoassemblies based on cyclodextrin-modified dextrans

Nanoassemblies formed by host/guest interactions between two polymers in aqueous media are studied. Two types of polymers with the same dextran backbone are modified with adamantyl or βCD groups. The sizes of the spontaneously formed nanoassemblies depend on the βCD:Ada ratio and on the total concentration and composition of the mixtures. The results can be rationalized by assuming a core/shell structure of the nanoassemblies, the core resulting from associative phase separation of the two polymers and being stabilized by an external shell made of Ada-grafted dextran and containing ions adsorbed from the solution. Hydrophobic compounds such as benzophenone can be incorporated efficiently without inducing changes in properties of the nanoassemblies.     

Low-parachor solvents extraction and thermostated micro-thin-layer chromatography separation for fast screening and classification of spirulina from pharmaceutical formulations and food samples

The goal of this paper is to demonstrate the separation and detection capability of eco-friendly micro-TLC technique for the classification of spirulina and selected herbs from pharmaceutical and food products. Target compounds were extracted using relatively low-parachor liquids. A number of the spirulina samples which originated from pharmaceutical formulations and food products, were isolated using a simple one step extraction with small volume of methanol, acetone or tetrahydrofuran. Herb samples rich in chlorophyll dyes were analyzed as reference materials. Quantitative data derived from micro-plates under visible light conditions and after iodine staining were explored using chemometrics tools including cluster analysis and principal components analysis. Using this method we could easily distinguish genuine spirulina and non-spirulina samples as well as fresh from expired commercial products and furthermore, we could identify some biodegradation peaks appearing on micro-TLC profiles. This methodology can be applied as a fast screening or fingerprinting tool for the classification of genuine spirulina and herb samples and in particular may be used commercially for the rapid quality control screening of products. Furthermore, this approach allows low-cost fractionation of target substances including cyanobacteria pigments in raw biological or environmental samples for preliminary chemotaxonomic investigations. Due to the low consumption of the mobile phase (usually less than 1 mL per run), this method can be considered as environmentally friendly analytical tool, which may be an alternative for fingerprinting protocols based on HPLC machines and simple separation systems involving planar micro-fluidic or micro-chip devices.     

Antibodies as Tailor-Made Chiral Selectors: an Interdisciplinary Approach to Enantiomer Separation and Detection

 It has long been known that the configurational isomers of biologically active compounds, e.g., nutrients, pesticides, and drugs, may exhibit different activities in a chiral environment such as the human body. Although the majority of drugs presently in development are chiral, analytical and preparative methods for the quantitative determination and purification of stereoisomers still lag behind. One reason is that commonly used chiral selectors for the direct resolution of enantiomers are not tailor-made for a specific analyte. The identification of suitable selectors for a particular pair of enantiomers still requires considerable experimentation and is generally demanding with regard to material, time and labor. The rational design of chiral host molecules, therefore, represents a challenge in facilitating enantiomer analysis. In this article, we describe how a combination of techniques ranging from organic synthesis to molecular biology yields antibodies of predetermined specificity and stereoselectivity that can be used as tailor-made chiral selectors for the chromatographic separation of enantiomers and their sensitive detection in immunosensors.     

Advanced mass spectrometric methods applied to the study of fate and removal of pharmaceuticals in wastewater treatment

This overview is of analytical methodologies based on gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry, applied in environmental monitoring of pharmaceutical residues and their known degradation products. We also consider the ability of time-of-flight (TOF) and quadrupole-TOF instruments to provide sufficiently accurate-mass measurements and full-scan spectra for unequivocal confirmation of target compounds and investigation of their degradation products, which are either known or unknown.

We focus attention on the fate and the behavior of pharmaceutical residues during conventional and advanced wastewater treatments. Wastewater-treatment plants are designed to remove conventional pollutants (e.g., suspended solids and biodegradable organic compounds), but not low concentrations of synthetic pollutants (e.g., pharmaceutically active compounds).

Membrane bioreactor systems represent a new generation of processes that have proved to outperform conventional activated sludge treatment in terms of sludge production and effluent quality. In the past few years, there has been much attention paid to their capability for removing trace organic contaminants from sewage. This review highlights their improved performance in removing pharmaceutical residues from wastewater compared to conventional treatment.     

Large-pore mesoporous SBA-15 silica particles with submicrometer size as stationary phases for high-speed CEC separation

A new mesoporous sphere-like SBA-15 silica was synthesized and evaluated in terms of its suitability as stationary phases for CEC. The unique and attractive properties of the silica particle are its submicrometer particle size of 400 nm and highly ordered cylindrical mesopores with uniform pore size of 12 nm running along the same direction. The bare silica particles with submicrometer size have been successfully employed for the normal-phase electrochromatographic separation of polar compounds with high efficiency (e.g., 210,000 for thiourea), which is matched well with its submicrometer particle size. The Van Deemeter plot showed the hindrance to mass transfer because of the existence of pore structure. The lowest plate height of 2.0 microm was obtained at the linear velocity of 1.1 mm/s. On the other hand, because of the relatively high linear velocity (e.g., 4.0 mm/s) can be generated, high-speed separation of neutral compounds, anilines, and basic pharmaceuticals in CEC with C18-modified SBA-15 silica as stationary phases was achieved within 36, 60, and 34 s, respectively.     

有机物优先透过的聚二甲基硅氧烷渗透汽化膜的改性研究进展

有机物优先透过的渗透汽化过程(Organophilic Pervaporation,O-PV)是一种膜分离技术,可以有效脱除化学、制药、电子、石化、印刷、涂料、纺织等工业废水中含有的微量挥发性有机物(Volatile organic compounds,VOCs),如苯、甲苯、三氯乙烯、氯仿和苯酚等.膜(一般指高分子膜)是O-PV过程的核心,而用于O-PV的膜分离性能主要取决于膜材料所具有的内在分离性能.聚二甲基硅氧烷(Poly(dimethyl siloxane), PDMS )是目前为止应用最为广泛的O-PV膜材料.本文综述了有机物优先透过的PDMS渗透汽化膜的改性研究进展,并展望了其未来的发展方向和前景.     

Polymeric Membrane Nanofiltration and Its Application to Separations in the Chemical Industries

The application of membrane technology, particularly water-based nanofiltration, as a separation process in the chemical industries has increased tremendously in recent years. However, the use of membranes capable of molecular separation in non-aqueous systems (e.g. nanofiltration) is a relatively new and growing application of membrane technology. The main challenge in applying polymeric nanofiltration membranes to non-aqueous systems is that the polymers developed for water-based applications are not suitable. Polyimide is a particularly interesting polymer as it has excellent chemical resistance, and membranes produced from it provide desirable separation properties – i.e. economically viable flux and good separation of nanoscale molecules. Various research works have shown that commercial polyimide organic solvent nanofiltration (OSN) membranes, trademark STARMEM™, 1 are robust and suitable for performing molecular separations. This work will discuss in detail the use of STARMEM™ in a pharmaceutical application. The EIC-OSN process was developed for separating the enantiomers of chiral compounds in pharmaceutical applications. High optical purity (94.9%) of (S)-phenylethanol from rac-phenylethanol was achieved through the use of STARMEM™122. Process simulation of the ideal eutomer-distomer system predicted that the highest theoretical resolvability from this process would be 99.2%. Other application areas of OSN are varied, including purification and fractionation in the natural products industry, homogeneous catalyst recovery, monomer separation from oligomers, etc. Currently, OSN is used in a small number of processes including a very large petrochemical application, but it has the potential to be applied to a wide range of separations across the full spectrum of the chemical industries.     

Inclusion Compounds — possibility of their combination and use in different branches of chemistry

Hofmann-type and related compounds, a natural zeolitic material of the clinoptilolite type, and cyclodextrins have been studied. Different products, useful in the separation of organic mixtures, used with fertilizers and insecticides in agrochemistry, perfumes, and in the detoxication of raw materials, have been prepared by combinations of the inclusion compounds studied. In the Hofmann-type compounds and cyclodextrins the original guest is substituted; in the zeolite the original sorbate, as well as some part of the zeolitic host is substituted. The physical mixtures of the starting materials differed from the products in their thermal, spectral and diffractographic characteristics. Field test results and other supporting evidence are added.     

Sampling of organic volatiles in the atmosphere at moderate and low pollution levels

Several techniques are available for measuring organic volatiles in the atmosphere. For measurements at low and moderate pollution levels (between several μg m^?3 and a fraction of a μg m^?3), the existing methods can be adopted to a broad range of different compounds. Whole-air sampling in stainless-steel containers with metal bellows valves combined with subsequent gas chromatographic separation after preconcentration in the laboratory is probably the best procedure for low and medium molecular weight trace gases of moderate or low polarity and reasonable chemical stability (e.g., hydrocarbons and halocarbons). For organic compounds of lower volatility, adsorptive sampling on non-polar porous organic polymers (e.g., Tenax) and thermal desorption combined with cryotrapping and gas chromatographic separation of the sampled compounds is widely used. However, there are often substantial problems due to artefact formation or loss reactions. Owing to the generally larger sample volumes, these problems are even more pronounced for sorptive sampling techniques combined with sample recovery by solvent extraction. Unfortunately, the general understanding of the various processes of sample degradation due to chemical reactions of reactive components of the atmosphere with each other or with the sorbent is not yet sufficient to allow reasonable estimates of the extent of such interferences without elaborate test procedures.