Thermally stimulated depolarization currents of tactic polymethyl methacrylates and their mixtures

Summary Thermally stimulated depolarization currents (TSDC) of atactic (a), syndiotactic (s) and isotactic (i) PMMA and mixtures ofs- andi-PMMA were measured. In pure tactic PMMA, TSDC peak was obtained at a temperature corresponding to the glass transition temperature of each PMMA. TSDC of mixtures isolated as precipitates from 1/1 and 1/2 (i/sweight ratio) mixed solutions showed a peak which can be attributed to the glass transition temperature of the stereocomplex. TSDC of original l/1 mixture showed two peaks which are ascribed to the glass transition temperature of residual i-PMMA and the stereocomplex. The results suggests that stereocomplex formation occurs ini/s weight ratio of 1/2 independent of the way of preparation.With 9 figures and 1 table     

Synthesis and characterization of stereoregular poly(methyl methacrylate)–silica hybrid utilizing stereocomplex formation

Stereoregular poly(methyl methacrylate) (PMMA)–silica nanocomposites were prepared using stereocomplex formation between i-PMMA and s-PMMA by an in situ method. The methodology adopted here is the simultaneous formation of organic gel and inorganic gel, the so-called interpenetrating polymer network (IPN) formation. The gelation of i- and s-PMMA were performed by stereocomplex formation with the associated segments forming the crosslinking points in the presence of tetramethoxysilane (TMOS). The effects of the i/s-ratio, PMMA concentration, molecular weight, and solvent nature on the hybrid materials formation were addressed. The presence of the stereocomplex in the silica matrix was confirmed by DSC and solvent extraction methods. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 785–794, 2004     

Study of ordered structures of syndiotactic poly(methyl methacrylate) in solution and in the solid state

From analysis of infrared spectra it was found that in syndiotactic (s) poly(methyl methacrylate) (PMMA) in solution, long s sequences contain an increased population of diads with a skeletal conformation tt (in the staggered approximation). Self-aggregation of s-PMMA in solution leads to a further increase of the fraction of long s sequences in the extended chain conformation, and to an ordering of easter groups. When solid s-PMMA is isolated from a solution in which it exists in the aggregated state, these characteristics are preserved in the solid. The polymer appears partially crystalline by x-ray scattering, and it exhibits fibrillar morphology under the electron microscope. Ordered structures of s-PMMA melt at temperatures about 150°C, while the presence of residual solvent decreases the temperature of melting. Solid s-PMMA obtained from solutions in which aggregation of the polymer does not take place, like s-PMMA which did not come into contact with solvent, contains a higher proportion of syndiotactic diads with a skeletal conformation tg; these samples are amorphous and morphologically structureless. Analogies between the structure of ordered s-PMMA and the structure of the PMMA stereocomplex are also discussed.     

Association of stereoregular poly(methyl methacrylates) in dilute solution. Proton NMR study

By measurement of integrated intensities of high-resolution proton nuclear magnetic resonance (NMR) bands, associated structures of isotactic (i) and syndiotactic (s) poly(methyl methacrylate) (PMMA) in dilute toluene-d₈ and dimethylformamide-d₇ solutions were detected and characterized. In 1% (w/v) solutions of highly stereoregular s-PMMA in toluene-d₈ at 27°C, 76% of the monomer units are present in the form of compact aggregates. Consequences of this finding for the polymerization of methyl methacrylate in toluene in the presence of s-PMMA are discussed.     

Solid matrix polymerization and stereoisomeric complexes of poly(methyl methacrylate)

The polymerization of methyl methacrylate within solid matrices of stereoregular poly(methyl methacrylate) has been studied by proton NMR and wide angle X-ray diffraction. The semi-crystalline isotactic (i-) PMMA matrix was synthesized in the laboratory by anionic polymerization initiated by phenylmagnesium bromide, and the syndiotactic (s-) PMMA matrix was synthesized through a Ziegler–Natta reaction. Matrix polymerization of the monomer was initiated through the redox activation of benzoyl peroxide with N,N-dimethyl-p-toluidine. NMR measurements of triad distributions in matrix-polymerized chains suggest that the well-known stereospecific replica polymerization in PMMA (syndiotactic sequences promote isotactic sequences and vice versa) plays only a limited role in the systems studied. Experimental results indicate that chains grown within the i-PMMA or s-PMMA solid matrices have greater degrees of configurational disorder. The greater concentration of atactic triads in these chains could be the result of limited free volume or steric effects during polymerization in a highly condensed environment. X-ray diffraction studies of solution cast blends of isotactic PMMA and PMMA with conventional tacticity reveal some crystallinity with a structure characteristic of the stereocomplex formed by isotactic and syndiotactic PMMA from suitable solvents. Evidence was obtained for the presence of this complex in solidified mixtures of the i-PMMA solid matrix and liquid monomer. This observation is an example of special intermolecular structures that can form under conditions of in situ growth of chains within a pre-polymerized matrix.     

NMR study of structure and dynamics of stereocomplexes of poly(methyl methacrylate) in C6D6 and CD3CN

Summary Stereocomplexes of isotactic (i) and syndiotactic (s) poly(methyl methacrylate)(PMMA), with different stereoregularity of thes-PMMA component, in C₆D₆ and CD₃CN solution were investigated by means of¹H NMR spectra measured with magic angle spinning (MAR-NMR), broadline (BL) NMR spectra and¹³C NMR spectra measured with strong proton decoupling. This study has shown that in associated segments of the stereocomplexes withp= 30–40% (p is the fraction of associated monomer units) the-CH₃ and CH₂ groups exhibit equal mobility as in solutions of onlyi ors PMMA, but in consequence of interaction of the ester groups these motions are restricted in space. In complexes with high density of interactions (p 75%) the motion of-CH₃ and CH₂ groups in associated segments is retarded. The network model of the stereocomplex, and the possibility of the formation of a double helix are discussed.

---

Zusammenfassung Stereokomplexe von isotaktischem (i) und syndiotaktischem (s) Polymethylmethacrylat (PMMA), mit verschiedener Stereoregularität ders-PMMA Komponente, in C₆D₆ und CD₃CN Lösung, wurden durch¹H NMR Spektra mit Magisch-Winkel-Rotation (MAR-NMR), durch Breitband (BL) NMR Spektra und durch¹³C NMR Spektra mit starker Protonenentkopplung untersucht. Es wurde herausgefunden, daß in assoziierten Segmenten des Stereokomplexes mitp = 30–40% (p ist der Bruchteil der assoziierten Monomereinheiten) die-CH³ und CH²-Gruppen die gleiche Beweglichkeit wie in Lösungen von nur s oder nuri-PMMA ausweisen, aber infolge der Wechselwirkung der Estergruppen sind diese Bewegungen raumbehindert. In Komplexen mit einem hohen Grad von Wechselwirkungen (p 75%) ist die Beweglichkeit der-CH³ und CH²-Gruppen in assoziierten Segmenten verzögert. Das Netzwerkmodell des Stereokomplexes, sowohl als auch die Möglichkeit einer Doppelhelixform, werden diskutiert.

---

---

Dedicated to Prof. Dr. G. Rehage on the occasion of his 60th birthday.

---

With 2 figures and 1 table     

Coordination of perchlorate ion in the secondary solvation sphere of Am3+ in the tracer concentrations in mixed system of dimethyl sulfoxide/water with 1.00M (H,Na)(Cl,ClO4)

The stability constants, β₁, of monochloride complex of Am(III) have been determined in a mixed system of dimethyl sulfoxide (DMSO) and water at 1.00 mol·dm⁻³ ionic strength using solvent extraction. The values of β₁ in mixed DMSO+H₂O solutions decrease rapidly with an increase in the mole fraction of DMSO (X _s ) in mixed solvents and become negative ones, which is not in a definition of stability constant, inX _s >0.04. The variation of β₁ inX _s ≦0.02 was accounted for by the size-variation of the primary solvation sphere around Am(III), which was present as a solventshared ion-pair, and by a little effect due to an invasion (coordination) of ClO₄ ⁻ into the secondary solvation sphere of Am³⁺. On the other hand, it was concluded that the β₁ obtained by solvent extraction inX _s >0.02 was an apparent value, because of a large effect due to an invasion (coordination) of ClO₄ ⁻ into the secondary solvation sphere of Am(III).     

Preparation and properties of isotactic and syndiotactic poly(methyl methacrylate)s,uniform with respect to molecular weight

Highly isotactic (it-) and highly syndiotactic (st-) poly(methyl methacrylate)s (PMMAs) uniform with respect to molecular weight (stereoregular, uniform PMMAs) were isolated up to the 100mer from it- and st-PMMAs by supercritical fluid chromatography (SFC) and characterized by NMR and mass spectroscopies. Glass transition temperatures (Tg's) of the uniform it- and st-PMMAs were higher than those of the corresponding PMMAs with MWD and with similar molecular weight on average. The Tg values of the uniform it-and st-PMMAs series obeyed the relationship, Tg = Tg∞ - K/M, where M and Tg∞ denote molecular weight and Tg at infinite M, respectively. The reciprocal melting points (1/Tm) of uniform it-PMMA (degree of polymerization, DP = 28–44), obtained from methanol solutions by evaporating the solvent, increased linearly with increasing 1/DP. Extrapolation of the linear relation to 1/DP = 0 gave the Tm of it-PMMA with infinite DP; Tm∞ = 171.1°C. Thermal degradation behavior was studied by thermogravimetry and by SFC analysis of degradation products. In gel-permeation chromatography (GPC) measurements, the it-50mer eluted faster than the st-50mer. Calibration curves for it- and st-PMMAs could be obtained using series of the uniform PMMAs. The instrumental spreading factor determined using it-25mer, it-50mer, st-25mer and st-50mer for our GPC chromatograph was 0.070 ml when the volume of the sample solution was 0.003ml. GPC analysis of a mixture of the it- and st-50mers in tetrahydrofuran indicated formation of a stereocomplex in the solution, and was found quite useful to elucidate the minimum sequence length required for complex formation.     

An effective etching technique for polycarbonate/core-shell poly(butyl acrylate)-poly(methyl methacrylate) blend

Two etching techniques are used to reveal the morphology of PC/PBA-cs-PMMA blend. One is based on acetic acid (CH₃COOH) solutions, whereas the other uses CCl₄/C₂H₅OH (3/1 v/v). The latter approach shows to be more appropriate and successful for revealing the morphology of PC/PBA-cs-PMMA blend.     

Morphology development during isothermal crystallization. II. Isotactic and syndiotactic polypropylene blends

Morphology development during isothermal crystallization in equal molecular weight isotactic polypropylene (iPP), syndiotactic polypropylene (sPP), and iPP/sPP blends was studied with time‐resolved simultaneous small‐angle X‐ray scattering (SAXS) and wide‐angle X‐ray diffraction (WAXD) with synchrotron radiation. The sPP melting point is 15–20 °C below that of the iPP component, and sPP multiple melting is not affected by blending for 50–100 wt % sPP compositions. SAXS and WAXD (at 115 and 137.5 °C) show that sPP crystallizes more slowly than iPP. The sPP long spacing is larger than that of iPP at both crystallization temperatures, exhibits a broader distribution, and changes to a greater extent during crystallization. Differential scanning calorimetry (DSC) cooling and SAXS/WAXD measurements show iPP crystallizing first and nearly to completion before sPP in a 50:50 iPP/sPP blend. At 115 °C, iPP crystals nucleate sPP in a 50:50 blend and modify the sPP lamellar spacing. The nucleation does not overcome the large difference in the iPP and sPP rates at 137.5 °C. Before sPP crystallization in a 50:50 blend (115 °C), the iPP long spacing is not affected by molten sPP. The iPP long spacing is slightly expanded by molten sPP, and the WAXD induction time is delayed at 137.5 °C. The observed iPP long spacing in the presence of molten sPP is consistent with previously reported results for iPP/atactic polypropylene (aPP) blends of similar molecular weight. Quantitative differences between the two types of blends are consistent with previously reported thermodynamic rankings. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1876–1888, 2001     

Macromorphology of polypropylene homopolymer tacticity mixtures

The macromorphology of isotactic/atactic (iPP/aPP) and isotactic/syndiotactic (iPP/sPP) polypropylene mixtures is examined by optical microscopy. The spherulitic macrostructure of equimolecular weight [weight‐average molecular weight (M_w) = 200k] iPP/aPP blends is volume‐filling to very high aPP concentrations when the crystallization temperature is 130 °C. Similar spherulitic macrostructures (spherulite size and volume‐filling nature) are observed for iPP homopolymer and a 50/50 iPP/aPP blend at low crystallization temperatures (115–135 °C). At higher crystallization temperatures (140–145 °C), a equimolecular weight (M_w = 200k) 50/50 iPP/aPP blend exhibits nodular texture that blurs the spherulitic boundaries. Double temperature jump experiments show that the nodular texture is due to melt phase separation that develops prior to crystallization. The upper critical solution temperature (UCST) of a 50/50 iPP/aPP blend (M_w = 200k) lies below 155 °C, and the blend is miscible at conventional melt processing temperatures. The UCST behavior is controlled by the blend molecular weight and aPP microstructure. aPP microstructures containing increased isospecific sequencing (although still noncrystalline) exhibit a reduced tendency for phase separation in 50/50 mixtures (M_w = 200k) and the absence of nodular texture at low undercoolings (140–145 °C). Equimolecular weight (M_w = 200k) 50/50 iPP/sPP mixtures exhibit phase‐separated texture at all crystallization temperatures. The size scale of the phase‐separated texture decreases with decreasing crystallization temperature because of a competition between crystallization and phase separation from a melt initially well mixed from the initial solution blending process. Extended melt annealing experiments show that the 50/50 iPP/sPP mixture (M_w = 200k) is immiscible in the melt at conventional melt processing temperatures. The iPP/sPP pair shows a much stronger tendency for phase separation than the iPP/aPP polymer pair. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1947–1964, 2000     

Bimetallic Alkoxides of Barium and Zirconium: Preparation of BaZrO3 Powder

Complex formation in solutions of barium and zirconium alkoxides in ROH (R=i-Pr, Et) was studied. A number of bimetallic complexes were isolated, and their structure and properties were studied. The sol-gel method yields a single-phase BaZrO₃ powder only wheni-PrOH solutions of the alkoxides are used. In this case, the oxocomplex, BaZrO(OPr-i)₄.(1–2)i-PrOH, is the precursor of the mixed oxide.     

Stereoregular P(MMA)‐clay nanocomposites by metallocene catalysts: In situ synthesis and stereocomplex formation

This contribution reports the synthesis and characterization of stereochemically controlled, as well as crystalline stereocomplex, P(MMA)‐clay nanocomposites using metallocene complexes and alane‐intercalated clay activators. The ligand elimination and exchange reactions involving Lewis acids E(C₆F₅)₃ (E = Al, B) and an organically modified montmorillonite clay were employed to synthesize the alane‐intercalated clay activators. When combined with dimethyl metallocenes of various symmetries, these clay activators brought about efficient MMA polymerizations leading to in situ polymerized, stereochemically controlled P(MMA)‐intercalated clay nanocomposites. The most noticeable thermal property enhancement observed for the clay nanocomposite P(MMA), when compared with the pristine P(MMA) having similar molecular weight and stereomicrostructure, has a considerable increase in T_g (≥10 °C). Mixing of dilute THF solutions of two diastereomeric nanocomposites in a 1:2 isotactic to syndiotactic ratio, followed by reprecipitation or crystallization procedures, yielded unique double‐stranded helical stereocomplex P(MMA)‐clay nanocomposites with a predominantly exfoliated clay morphology. Remarkably, the resulting crystalline stereocomplex P(MMA) matrix is resistant to the boiling‐THF extraction and its clay nanocomposites exhibit high T_m of 201 to 210 °C. Furthermore, the stereocomplex P(MMA)‐clay nanocomposite shows a one‐step, narrow decomposition temperature window and a single, high maximum rate decomposition temperature of 377 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2581–2592, 2007     

Chemical composition effects on the fracture of polystyrene-block-poly(methyl methacrylate)block copolymers

The crazing and fracture behaviors of glassy–glassy block copolymers were investigated for polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) diblock copolymers that had similar overall molecular weights but different poly(methyl methacrylate) (PMMA) molar fractions. A liquid chromatography technique was applied to separate as-synthesized PS-b-PMMA [(1) weight-average molecular weight (M_w) = 94,000 g/mol and PMMA molar fraction = 0.35 and (2) M_w = 65,000 g/mol and PMMA molar fraction = 0.28] into three fractions with different chemical compositions. With a copper-grid technique, the fracture behaviors of 0.5-μm-thick PS-b-PMMA films were studied as a function of the applied strain. For the higher M_w PS-b-PMMA samples, the median strains at crazing and fibril breakdown increased with an increase in the PMMA molar fraction from 0.24 to 0.46, corresponding to an increase in the chain entanglements in the PMMA domains. In contrast, for the lower M_w samples, the two values were not significantly changed even when the PMMA molar fraction was varied from 0.16 to 0.35. M_w of the minor component in PS-b-PMMA played a critical role in controlling the fracture behaviors of the block copolymers. Specifically, M_w/M_e of the minor component (where M_e is the molecular weight between entanglements) had to be roughly larger than 2 for the block copolymers to sustain sufficient strains before fracture. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3612–3620, 2006     

A novel route to the synthesis of PP-g-PMMA copolymer via ATRP reaction initiated by Si-Cl bond

The copolymerization of propylene with allyldimethylsilane (ADMS) was carried out with conventional Ziegler-Natta catalyst supported on MgCl₂. The effects of the concentration of ADMS in the feed on the polymerization reaction and copolymer properties were investigated. The resulting copolymer PP-co-ADMS was chlorinated to PP-Si-Cl by refluxing the copolymer with SOCl₂ in benzene. The chlorinated copolymer was used to initiate ATRP of MMA with CuCl/PMDETA as catalyst to produce graft copolymer PP-g-PMMA, which was characterized with ¹H NMR, ¹³C NMR, GPC and DSC. Polymer blend of iPP/PP-g-PMMA/PMMA was prepared and the results shown that PP-g-PMMA was an effective compatilizer.     

Synthesis of polypropylene block copolymers from brominated styrene-terminated isotactic polypropylene

Isotactic polypropylene block copolymers, isotactic-polypropylene-block-poly (methyl methacrylate) (i-PP-b-PMMA) and isotactic-polypropylene-block-polystyrene (i-PP-b-PS), were prepared by atom transfer radical polymerization (ATRP) using a brominated styrene-terminated isotactic polypropylene macroinitiator synthesized from bromination of styrene-terminated isotactic polypropylene. The styrene-terminated isotactic polypropylene can be obtained by polymerization of propylene in the presence of styrene and hydrogen chain transfer agents using a rac-Me₂Si[2-methyl-4-(1-naphyl)Ind]₂ZrCl₂ as catalyst. The molecular weights of isotactic polypropylene block copolymers were controlled by altering the amount of hydrogen used in the polymerization of propylene and the amount of monomer used in the blocking reaction. The effect of i-PP-b-PS block copolymer on PP-PS blends and that of i-PP-b-PMMA block copolymer on PP-PMMA blends were studied by scanning electron microscopy.     

Study on the variation of intraionic distance between Fe3+ and F− in methanol-water system based on its stability constant

The stability constants, ₁, of the monofluoride complex of Fe(III) have been determined in mixed methanol + water solvent system with 0.3 mol·dm^–3 HClO₄ using a solvent extraction technique. The values, in less than 0.31 mole fraction of CH₃OH (X _s) in the mixed CH₃OH+H₂O solvent solution, increase asX _s increases. The variation of in ₁ againstX _s was analyzed to elucidate the variation of intraionic distance between Fe³⁺ and F^–. The intraionic distance maintains constant inX _s<0.05 and lengthens with an increase ofX _s in 0.05<X _s<0.31.     

Relation between refractive index and density of polymer solutions

The relation between the fractive index n and the density ρ of a liquid mixture is formulated as where w_i and Rs_i are the weight fraction and the specific refraction, respectively, of component i. The calculation of the specific refraction of straight-chain polyethylene and polystyrene from data for pure compounds of low molecular weight is discussed. The result is applied to dilute solutions of polystyrene in toluene. The calculated values of (dp/dw)₀ and (d²ρ/dw²)₀ at three different temperatures are compared with measured values. The agreement is satisfactory.     

Synthesis and characterization of iPP‐sPP stereoblock produced by a binary metallocene system

Stereoblock polypropylenes comprising of iPP and sPP segments are synthesized by polymerization of the following binary system of metallocenes: the C_s‐symmetric [2,7‐t‐Bu₂(Flu)₂Ph₂C(Cp)ZrCl₂] and the C₂‐symmetric rac‐Me₂Si(2‐Me‐4‐Ph‐Ind)₂ZrCl₂. Blends of samples made either by each catalyst individually (solution blend) with materials obtained with the mixed catalyst system (reactor blend) are compared. The simultaneous presence of MAO and DEZ, enhancing fast and reversible transfer of the growing chains between the two active centers, leads to the formation of a stereoblock microstructure. In this case, low molecular weight polymers are obtained. The junction between the blocks is qualitatively observed in ¹³C NMR. When made in toluene, the stereoblock material consists of a majority of syndiotactic sequences, whereas the ratio is more equilibrated when the polymerization was conducted in the more polar chlorobenzene. This is confirmed by the results obtained with ¹³C NMR, CRYSTAF, HT HPLC, DSC, SSA, WAXD, and optical microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1422–1434     

The Features of Interaction of Bis(4, 6‐di‐tert‐butyl‐N‐(2, 6‐diisopropylphenyl)‐o‐amidophenolato)tin(IV) with Bromine and Iodine

The oxidation of tin(IV) bis‐amidophenolate (APiPr)₂Sn · THF ( I ) by bromine and iodine leads to the formation of monoradical mixed‐ligand complexes (APiPr)(ISQiPr)SnBr · THF ( II ) and (APiPr)(ISQiPr)SnI · THF ( III ) or diradical complexes (ISQiPr)₂SnBr₂ ( IV ) and (ISQiPr)₂SnI₂ ( V ), respectively [APiPr = dianion 4, 6‐di‐tert‐butyl‐N‐(2, 6‐diisopropylphenyl)‐o‐amidophenolate; ISQiPr = radical‐anion 4, 6‐di‐tert‐butyl‐N‐(2, 6‐diisopropylphenyl)‐o‐iminobenzosemiquinone], depending on the molar ratio of reagents (2:1 or 1:1). According to EPR data for compounds II and III , the unpaired electron is delocalized between both organic ligands. The EPR spectrum of IV in toluene matrix at 130 K is typical for diradical species with S = 1 with parameters D = 530 G, E = 105 G. The mixed‐ligand complexes II and III are unstable and undergo to symmetrization leading to formation of IV or V . The molecular structures of IV and V are determined by X‐ray analysis.