1,1‐Diphenyl Ethylene‐Mediated Radical Polymerisation: A General Non‐Metal‐Based Technique For The Synthesis Of Precise Core Cross‐Linked Star Polymers

This communication details the successful synthesis of low polydispersity core cross‐linked star (CCS) polymers via DPE‐mediated polymerisation. We demonstrate the ability to produce poly(methyl methacrylate) and poly(acrylonitrile) CCS polymers that are currently inaccessible via the two most common non‐metal‐based controlled radical polymerisation techniques (NMP and RAFT polymerisations).

     

New Star‐Shaped Metallo‐Polymeric Chromophores

The synthesis of new star‐shaped polymers, prepared by atom transfer radical polymerization of methyl methacrylate with tris(dialkylaminostyryl‐2,2′‐bipyridine) zinc(II) and iron(II) metalloinitiators, is reported. Their thermal and optical (absorption and emission) properties are discussed.

Structure of the star‐shaped polymers.     

Mechanism of Dithiobenzoate‐Mediated RAFT Polymerization: A Missing Reaction Step

Summary: The debate on the mechanism of dithiobenzoate‐mediated RAFT polymerization may be resolved by including the reaction between a propagating radical and the star‐shaped combination product from irreversible termination into the kinetic scheme. By this step, a highly reactive propagating radical and a not overly stable three‐arm star species are transformed into the resonance‐stabilized RAFT intermediate radical and a very stable polymer molecule. The time evolution of concentrations is discussed for the main‐equilibrium range of CDB‐mediated methyl acrylate polymerization.

Illustration of the novel understanding of the RAFT mechanism in dithiobenzoate‐mediated RAFT polymerization.     

Investigation on RAFT Polymerization of a Y‐Shaped Amphiphilic Fluorinated Monomer and Anti‐Fog and Oil‐Repellent Properties of the Polymers

A Y‐shaped amphiphilic fluorinated monomer, 1‐(1H,1H,2H,2H‐perfluorodecyloxy)‐3‐(3,6,9‐trioxadecyloxy)‐propan‐2‐yl acrylate has been synthesized and its polymerization by reversible addition–fragmentation chain transfer (RAFT) homopolymerization has been investigated. The results show that the molecular weights of the polymers are controlled and all the molecular weight distributions are lower than 1.4. Well‐defined copolymers with 2‐(N,N‐dimethylamino)ethyl methacrylate have been prepared by RAFT polymerization, and the surface properties of the block and random copolymers have been examined by contact angle measurement for water and hexadecane. It has been found that the surfaces of the block copolymers simultaneously exhibit excellent anti‐fog and oil‐repellent properties.

     

RAFT Polymerization and Thiol Chemistry: A Complementary Pairing for Implementing Modern Macromolecular Design

Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied reversible deactivation radical polymerization methods for the production of well‐defined polymers. After polymerization, the RAFT agent end‐group can easily be converted into a thiol, opening manifold opportunities for thiol modification reactions. This review is focused both on the introduction of functional end‐groups using well‐established methods, such as thiol‐ene chemistry, as well as on creating bio‐cleavable disulfide linkages via disulfide exchange reactions. We demonstrate that thiol modification is a highly attractive and efficient chemistry for modifying RAFT polymers.

     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Direct Synthesis of Pyridyl Disulfide‐Terminated Polymers by RAFT Polymerization

A trithiocarbonate RAFT agent was modified with a pyridyl disulfide group and used in the direct synthesis of endgroup pyridyl disulfide‐functionalized homo‐ and amphiphilic block copolymers of oligo(ethyleneglycol) acrylate (PEG‐A) and butyl acrylate (BA). Both the homo‐ and copolymerizations were found to be well controlled via the RAFT mechanism. The NMR analysis indicated that both the homopolymers of PEG‐A and the amphiphilic diblock copolymers of PEG‐A and BA possessed pyridyl disulfide terminal groups. A UV‐Vis absorption test revealed that the pyridyl disulfide endgroup of the polymer could be efficiently used to couple thiol‐bearing molecules to the polymer without the need for any post‐polymerization modification. This communication presents the first efficient direct synthesis of thiol‐reactive endgroup‐functionalized well‐defined polymers via the RAFT technique.

     

Star Polyfluorenes with a Triphenylamine‐Based Core

Summary: Conjugated three‐ and four‐arm star polymers were successfully prepared by palladium catalyzed one‐pot Suzuki polycondensation of the multifunctional cores and an AB‐type monomer. The molecular weight of the star polymers could be controlled by the feed ratios of the monomers. The bromo end groups could be completely modified by fluorene mono boronic acid or triphenylamine mono boronic ester. The investigation of the optical, electrochemical, and thermal properties of the star polymers was also reported. All polymers exhibited good thermal stabilities and all the TPA‐capped polymers showed good hole‐transport abilities.

Preparation of three‐ and four‐arm star polyfluorences.     

Thermoreversibly Crosslinked Poly(ε‐caprolactone) as Recyclable Shape‐Memory Polymer Network

A new concept to build shape memory polymers (SMP) combining outstanding fixity and recovery ratios (both above 99% after only one training cycle) typical of chemically crosslinked SMPs with reprocessability restricted to physically crosslinked SMPs is demonstrated by covalently bonding, through thermoreversible Diels–Alder (DA) adducts, star‐shaped poly(ε‐caprolactones) (PCL) end‐functionalized by furan and maleimide moieties. A PCL network is easily prepared by melt‐blending complementary end‐functional star polymers in retro DA regime, then by curing at lower temperature to favour the DA cycloaddition. Such covalent network can be reprocessed when heated again at the retro DA temperature. The resulting SMP shows still excellent shape memory properties attesting for its good recyclability.

     

SET‐RAFT Polymerization of Progargyl Methacrylate and a One‐Pot/One‐Step Preparation of Side‐chain Functionalized Polymers via Combination of SET‐RAFT and Click Chemistry

A clickable alkyne monomer, PgMA, was successfully polymerized in a well‐controlled manner via single electron transfer initiation and propagation through the radical addition fragmentation chain transfer (SET‐RAFT) method. The living nature of the polymerization was confirmed by the first‐order kinetic plots, the linear relationships between molecular weights and the monomer conversions while keeping relatively narrow (≤1.55), and the successful chain‐extension with MMA. The better controllability of SET‐RAFT than other CRP methods is attributed to the less competitive termination in view of the presence of the CTA as well as the Cu(II) that is generated in situ. Moreover, a one‐pot/one‐step technique combining SET‐RAFT and “click chemistry” methods has been successfully employed to prepare the side‐chain functionalized polymers.

     

Precision Synthesis of Poly(3‐hexylthiophene) from Catalyst‐Transfer Suzuki−Miyaura Coupling Polymerization

^tBu₃ PPd(Ph)Br ( 1 )‐catalyzed Suzuki‐Miyaura coupling polymerization of 2‐(4‐hexyl‐5‐iodo‐2‐thienyl)‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane ( 2 ) was investigated. Monomer 2 was polymerized with 1 at 0 °C in the presence of CsF and 18‐crown‐6 in THF containing a small amount of water to yield P3HT with a narrow molecular weight distribution and almost perfect head‐to‐tail regioregularity. The values increased up to 11 400 g · mol⁻¹ in proportion to the feed ratio of 2 to 1 . The MALDI‐TOF mass spectra showed that P3HT with moderate molecular weight uniformly had a phenyl group at one end and a hydrogen atom at the other, indicating involvement of a catalyst‐transfer mechanism. Successive 1 ‐catalyzed polymerization of fluorene monomer 3 and then 2 yielded a well‐defined block copolymer of polyfluorene and P3HT.

     

Design of Heterocomplementary H‐Bonding RAFT Agents – Towards the Generation of Supramolecular Star Polymers

Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by ¹H NMR and GPC measurements, proving the formation of the supramolecular stars.

     

Synthesis of a Multi Alternating‐Arm‐Containing Dendritic Star Copolymer by RAFT and Cationic Ring‐Opening Polymerization

A new dendritic heteroarm star copolymer that contains multi‐alternating arms of poly(ethylene oxide‐tetrahydrofuran) (P(EO‐THF)) and poly(methyl methacrylate) (PMMA) on a dendritic polyester core has been synthesized by a ‘core‐first’ approach by combination of sequential cationic ring‐opening polymerization (CROP) and reversible addition–fragmentation transfer (RAFT) polymerization initiated by a dendritic macroinitiator ( 3 ) capped with multi‐alternating terminal carboxylic acid groups (used directly to initiate the ROP of THF in the presence of EO as a polymerization promoter to attain P(EO‐THF) arms) and dithiobenzoate groups (used to initiate RAFT polymerization of MMA to attain PMMA arms). The structures of the products were confirmed by NMR spectroscopy, GPC‐MALLS, and DSC measurements.

     

Precise Block‐Copolymers by Efficient Coupling of End‐Functionalized Polymers Using Phosgene

Summary: We report the synthesis of well‐defined block copolymers by covalent coupling of hydroxy end‐functionalized polymers. Using the high volatility of the coupling agent phosgene as compared to the solvent, very high conversion (up to 96%) is obtained in a one‐pot reaction with as little as 10⁻⁵ moles of each of the reacting polymers, even without prior purification of the as‐received reagents. This has potential as an alternative to the currently practiced method of sequential living polymerization of constituent monomers, with the added advantage of direct knowledge and control over the length distribution of each block.

Coupling of end‐functionalized polymers using phosgene to form block copolymers of controlled composition.     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Kinetic Investigations on the Polymerization of 2‐Oxazolines Using Pluritriflate Initators

In our ongoing efforts to develop poly(2‐oxazoline)s (POx) for biomedical applications, we report on the preparation of defined, star‐like hydrophilic POx. Using pluritriflate initiators, we show, through online kinetic measurements by gas chromatography, that multiple initiating groups are of equal reactivity for the initiation of the polymerization of 2‐oxazolines. The overall polymerization rate increases linearly with the number of initiator functions per molecule. Thus, all initiating moieties are of the same reactivity and all arms grow at the same rate. This is crucial for the establishment of a meaningful structure‐property relationship for polymers of star architectures.

     

Post‐Functionalization of Polymers via Orthogonal Ligation Chemistry

The establishment of advanced living/controlled polymerization protocols allows for engineering synthetic polymers in a precise fashion. Combining advanced living/controlled polymerization techniques with highly efficient coupling chemistries facilitates quantitative, modular, and orthogonal functionalization of synthetic polymer strands at their chain termini as well as side‐chain functionalization. The review highlights the current status of selected post‐functionalization techniques of polymers via orthogonal ligation chemistries, major characteristics of the specific transformation chemistry, as well as the characterization of the products.

     

Metallo‐Supramolecular Diethylene Glycol: Water‐Soluble Reversible Polymers

Bis(2,2′:6′,2″‐terpyrid‐4′‐yl) diethylene glycol was synthesized as a monomer unit and further utilized for polymerization with FeCl₂ in order to form water‐soluble coordination polymers. Viscosity measurements and film‐forming properties indicate the formation of linear coordination polymers or larger ring structures. The terpyridine/iron(II) complexes are stable up to temperatures of 210 °C, but can be uncomplexed by the addition of an excess of a strong competitive ligand (HEDTA) under mild conditions.

     

Span‐Length Distributions of Star‐Branched Polymers

Many relations between the physical, rheological or mechanical properties of linear polymers and their molar mass are well known. For disperse polymers, parameters that express these relations are typically related to (a combination of) the moments of the molar‐mass distribution. Properties of branched, nonlinear polymers have been far more difficult to describe in the form of general relations. Monodisperse star polymers or regular stars, with a distinct number of arms and equal arm length, are the simplest member of the family of branched polymers and have served as model compounds in many studies. For these regular stars, the relation between zero shear viscosity and arm or span length has been determined. To establish equivalent relations for disperse star‐branched polymers, it is important to assess the span‐length distribution and its moments; these parameters can be calculated when the distribution of the molar mass of the arms of a star‐branched polymer is known, for instance, for a known polymerization mechanism.

Span‐length probability functions of star‐branched polycondensates with x_n = 100: f = 1 (•), f = 2 (○), f = 3 (▪), f = 5 (□), and f = 10 (+).     

Polypeptoids by Living Ring‐Opening Polymerization of N‐Substituted N‐Carboxyanhydrides from Solid Supports

The nucleophilic living ring‐opening polymerization of N‐substituted glycine N‐carboxyanhydrides using solid‐phase synthesis resins is reported. By variation of experimental parameters, products with near Poisson distributions are obtained. As opposed to reversible deactivation radical polymerization, the living polymerization is demonstrated to be viable to high monomer conversion and through multiple monomer addition steps. Successful preparation of a multiblock copolypeptoid is proof for a highly living and robust character of the solid‐phase peptoid polymerization.