A High‐Content Diarylethene Photochromic Polymer for an Efficient Fluorescence Modulation

Summary: A highly fluorescent photochromic polymer, poly‐BTFO4, was prepared. The fluorescence quantum yield of the poly‐BTFO4 was six times higher than that of BTFO4. Fatigue resistance of the polymer at its photostationary state was significantly enhanced compared with that of BTFO4. Importantly, the poly‐BTFO4 film also showed an efficient photochromism as well as strong fluorescence similar to the results in solution, which allow photoinduced fluorescence switching applicable to optical switches.

Improvement of fluorescence quantum yield and fatigue resistance.     

Positive‐/Negative‐, Erasable‐/Immobilized‐, Mono‐/Multi‐Color Fluorescence Image Patterning of Molecular‐Scale Porous Polymer Film via a Microcontact Printing Method Using Various Chemical Inks

Fluorescent image patterns of a substituted acetylene polymer film with a large FFV were successfully obtained by a µCP method using several kinds of chemical ink compounds. PO and SCA generated positive‐type fluorescent image patterns. On the other hand, an ethanolic solution of DNT generated a negative‐type fluorescent image pattern due to a significant quenching effect. An NMP solution of NR gave a two‐color image pattern due to an intermolecular energy transfer from PTMSDPA to NR.

     

Well‐aligned Nano‐fiberous Membranes Based on Three‐pole Electrospinning with Channel Electrode

Three‐pole electrospinning devices integrated with a blade‐cage collector were developed to fabricate well‐aligned nano‐fiberous membranes. The proposed three‐pole configuration with a channel electrode can be a powerful tool in aligning nano‐fibers with regular diameter because the generated electric field can be accurately controlled without severe fluctuation in comparison with other methods. The three‐pole electrospinning method is also valid for industrial mass production and accurate diameter control of the aligned nano‐fibers.

     

Advances in the Elegance of Chemistry in Designing Dendrimers

Highly functional and monodisperse macromolecules with tailored architecture constitute the key to designing efficient and smart nanomaterials. Dendrimers offer real potential to achieve this goal, and one of the earlier challenges faced by this novel class of polymers has been addressed by the evolution of synthetic methodologies. This review provides an evaluation of the role played by chemistry in taking these macromolecules of academic relevance to practical industrial and biological applications, in a relatively short period. One can now construct dendrimers in a ‘made‐to‐order’ fashion, for numerous applications in a variety of disciplines.

     

Mapping Acid‐Catalyzed Deprotection in Thin Polymer Films: Fluorescence Imaging Using Prefluorescent 7‐Hydroxycoumarin Probes

Summary: Fluorescent images that illustrate acid‐catalyzed tert‐butoxycarbonyl (tBoc) deprotection patterns in polymer films were obtained using fluorescent sensors based on 7‐hydroxycoumarin dyes. Three commercial 7‐hydroxycoumarins, which are highly fluorescent, become practically nonemissive upon protection of the 7‐hydroxyl position with tBoc. In thin polymer films, the protected “prefluorescent” probes can return to their deprotected, fluorescent states by reaction with catalytic amounts of photogenerated acid and mild heating.

Protected probes become highly fluorescent after acid‐induced deprotection.     

Synthesis of Conjugated Polymer Nanoparticles in Non‐Aqueous Emulsions

Summary: A novel non‐aqueous emulsion system, consisting of cyclohexane as the continuous and acetonitrile as the dispersed phase, is described. Stabilization of the system can be achieved by using polyisoprene‐block‐poly(methyl methacrylate) copolymers as emulsifiers. The suitability of this system for performing water‐sensitive, catalytic, and oxidative polymerizations and polycondensations is demonstrated by the synthesis of poly(3,4‐ethylenedioxythiophene), poly(thiophene‐3‐yl‐acetic acid), and polyacetylene. In all cases spherical nanoparticles with diameters as small as 23 nm can be obtained.

     

Tandem RAFT Polymerization and Click Chemistry: An Efficient Approach to Surface Modification

PS grafted silica nanoparticles have been prepared by a tandem process that simultaneously employs RAFT polymerization and click chemistry. In a single pot procedure, azide‐modified silica, an alkyne functionalized RAFT agent and styrene are combined to produce the desired product. As deduced by thermal gravimetric and elemental analysis, the grafting density of PS on the silica in the tandem process is intermediate between analogous “grafting to” and “grafting from” techniques for preparing PS brushes on silica. Relative rates of RAFT polymerization and click reaction can be altered to control grafting density.

     

RAFT Inverse Miniemulsion Polymerization of Acrylamide

RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.

     

Temperature‐Sensitive Poly(N‐isopropylacrylamide) Hydrogels with Macroporous Structure and Fast Response Rate

Macroporous temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPA) hydrogels were prepared by a novel phase‐separation technique to improve the response properties. In comparison with a conventional PNIPA hydrogel prepared in water, these macroporous hydrogels, prepared by polymerization in aqueous sucrose solutions, have higher swelling ratios at temperatures below the lower critical solution temperature and exhibit much faster response rates to temperature changes.

Scanning electron microscopy image of the surface of a PNIPA hydrogel, prepared in 1.50 M aqueous sucrose solution.     

Poly(3,4‐ethylenedioxythiophene) Derived from Poly(ionic liquid) for the Use as Hole‐Injecting Material in Organic Light‐Emitting Diodes

We report that poly(3,4‐ethylenedioxythiophene) derived from poly(ionic liquid) (PEDOT:PIL) constitutes a unique polymeric hole‐injecting material capable of improving device lifetime in organic light‐emitting diodes (OLEDs). Imidazolium‐based poly(ionic liquid)s were engineered to impart non‐acidic and non‐aqueous properties to PEDOT without compromising any other properties of PEDOT. A fluorescent OLED was fabricated using PEDOT:PIL as a hole‐injection layer and subjected to a performance evaluation test. In comparison with a control device using a conventional PEDOT‐based material, the device with PEDOT:PIL was found to achieve a significant improvement in terms of device lifetime. This improvement was attributed to a lower indium content in the PEDOT:PIL layer, which can be also interpreted as the effective protection characteristics of PEDOT:PIL for indium extraction from the electrodes.

     

Photomechanical Switching Behavior of Semi‐Interpenetrating Polymer Network Consisting of Azobenzene‐Carrying Crosslinked Poly(vinyl ether) and Polycarbonate

Summary: A novel semi‐interpenetrating polymer network (semi‐IPN) with photomechanical switching ability was developed by a cationic copolymerization of azobenzene‐containing vinyl ethers in a matrix of a linear polycarbonate (PC). The semi‐IPN film showed reversible deformation upon switching the UV irradiation on and off and responded with unprecedented rapidity. The photomechanical effect is attributed to a reversible change between the highly aggregated and dissociated states of the azobenzene groups.

The reversible UV response of the length of the semi‐IPN film at 25 °C.     

Surface‐Functionalized,Ring‐Opening Metathesis Polymerization‐Derived Monoliths for Anion‐Exchange Chromatography

Ring‐opening metathesis polymerization (ROMP) was used for the synthesis of monolithic capillary columns with inner diameters of 200 µm. The resulting polymeric monoliths were characterized by inverse size‐exclusion chromatography (ISEC). Surface functionalization was carried out in situ using 2‐(N,N‐dimethylaminoethyl)norborn‐5‐ene‐2‐ylcarboxylic amide ( 1 ). The resulting functionalized monoliths were successfully used in anion‐exchange chromatography of oligodeoxynucleotides.

     

Synthesis of Strong Electrolyte Temperature‐Sensitive Hydrogels by Radiation Polymerization and Application in Protein Separation

Strong electrolyte temperature‐sensitive hydrogels were synthesized by radiation polymerization using N‐isopropylacrylamide and sodium 2‐acrylamido‐2‐methylpropanesulfonate. The influence of irradiation dose and mole ratio of the monomers was examined by swelling measurements in aqueous solution and organic solvents. The hydrogels without any pollution were applied in concentrating protein.

Effect of irradiation dose on swelling ratios of P(NIPA‐co‐NaAMPS) hydrogels.     

Novel Two‐Compartment Micelles Formed by Self‐Assembly of Linear Pentablock Copolymers in Selective Solvents

In this work, the formation of two‐compartment micelles from symmetric pentablock copolymers in selective solvents was studied using the dissipative particle dynamics simulation technique, and the effects of block lengths and solvent quality were investigated. The simulations revealed several new morphologies and their formation mechanisms were elucidated at the molecular level, providing useful information that may contribute to the future rational design and synthesis of novel multicompartment micelles with tailored structures.

     

Application and New Developments in Polymer‐Dispersed Liquid Crystal Simulation Studies

Polymer‐dispersed liquid crystals (PDLCs) represent an important new class of materials with electro‐optic applications such as flexible displays, large‐area devices projection displays, electrically switchable windows, etc. On considering such applications of these materials, many studies have been performed on the experimental side. Similarly, research on the simulation side for the PDLCs is of the fundamental interest too. The present article contains a short review on the present and past simulation studies of PDLCs. Various molecular simulation approaches applied to PDLC systems by different groups are reviewed here. In addition some new findings of the bulk phases are also extensively described.

     

Synthesis of Thermosensitive PNIPAM‐co‐MBAA Nanotubes by Atom Transfer Radical Polymerization within a Porous Membrane

Summary: Thermosensitive polymer nanotubes can be fabricated within an aminopropylsilane‐modified porous anodic aluminum oxide membrane by surface‐initiated atom transfer radical polymerization (ATRP) followed by template removal. DSC experiments prove that the synthesized PNIPAM‐co‐MBAA copolymer nanotubes have a reversible thermosensitive behavior. The temperature‐induced changes in dimension and shape of the nanotubes were studied by AFM in real time in an aqueous environment. It indicates that the nanotubes undergo a shape alteration from an “ellipse” to “circular” shape in water upon heating to LCST or above.

DSC curves of PNIPAM‐co‐MBAA nanotubes.     

Fabricating Super‐Hydrophobic Lotus‐Leaf‐Like Surfaces through Soft‐Lithographic Imprinting

Summary: A soft‐lithographic imprinting approach to fabricate super‐hydrophobic surfaces has been developed in this work. In this process, fresh lotus leaves were used as masters and PDMS stamps were prepared by replica molding against the lotus‐leaf surfaces. By using the stamps and an epoxy‐based azo polymer solution as “ink”, the mimicked lotus‐leaf surfaces made of the polymer were fabricated by pressing the featured faces of the stamps against “inked” substrates and drying under a proper condition after peeling off the stamps. The lotus‐leaf‐like surfaces show super‐hydrophobic characteristics with the water contact angle higher than 150° and contact angle hysteresis less than 3°.

SEM images of lotus‐leaf‐like papillary structures on the imprinted surface.     

Poly(amido‐amine)s Carrying Primary Amino Groups as Side Substituents

Poly(amido‐amine)s carrying primary amino groups as side substituents have been obtained by polyaddition of N‐triphenylmethyl‐monosubstituted 1,2‐diaminoethane (TPHMAE) to 2,2‐bisacrylamido acetic acid or 1,4‐bisacryloylpiperazine and subsequent removal of the protecting triphenylmethyl group by treating the resultant polymers with aqueous hydrochloric acid. Soluble polymers can be also obtained directly by the polyaddition of monoprotonated 1,2‐diaminoethane to 2,2‐bisacrylamido acetic acid in the presence of a limited amount of added acetic or hydrochloric acid. The resultant polymers are of a higher molecular weight than the corresponding ones prepared from TPHMAE. By adding a limited amount of N‐triphenylmethyl‐monosubstituted 1,2‐diaminoethane to the monomer mixtures leading to poly(amido‐amine)s with a recognised potential as nonviral vectors, such as ISA 23 and ISA 1, a controlled number of pendant primary amino groups have been introduced. By this procedure, ISA 23 and ISA 1 become suitable as polymer carriers for carboxylated drugs as well as amenable to the labelling techniques by fluorescent probes commonly employed for proteins.

Formation of monoprotected primary diamines.     

Fabrication of Metal‐Block‐Copolymer Composite Films by a Palladium‐Catalyzed Electroless Nickel‐Plating Process

Summary: Homogeneous films of PI‐b‐PDMAEMA are prepared on top of silicon (100) substrates. The free film surface shows microdomains of PDMAEMA within a PI matrix. These microdomains act as templates for the highly site‐selective synthesis of metal nanoparticles via palladium‐catalyzed electroless nickel plating. The particle formation is studied by atomic force microscopy in tapping mode and implications for a redox reaction and a nanoparticle growth mechanism on the surface of nanopatterned films are discussed.

Chemical structure of the PI‐b‐PDMAEMA copolymer and AFM phase image of a PI‐b‐PDMAEMA film on Si (100) substrate.