Poly(L‐lactide)‐Degrading Activity in Various Actinomycetes

The poly(L ‐lactide) (PLA)‐degrading ability of actinomycetes obtained from culture collections was examined by the formation of clear zones on PLA‐emulsified agar plates. Using 41 genera (105 strains) of actinomycetes with phylogenetic affiliations based on 16S rRNA sequences, PLA degraders were found to be limited to members of the family Pseudonocardiaceae and related genera. They included Amycolatopsis, Saccharothrix, Lentzea, Kibdelosporangium, and Streptoalloteichus. A large number of PLA degraders were widely distributed within the genus Saccharothrix. Most strains forming clear zones on PLA‐emulsified agar plates also formed clear zones on silk fibroin agar plates. Saccharothrix species showed an ability to degrade PLA films and assimilate degradation products in liquid cultures. No significant change of the molecular weight and polydispersity (M _w/M _n) of the remaining film fragments was confirmed. After cultivation for two weeks, many irregular holes/pits on the surface of the film due to the colonization of microorganisms were observed by scanning electron microscopy.

Scanning electron micrograph of the surface of PLA film: A. orientalis subsp. orientalis IFO 12362 after 14 d.     

L,L‐Lactide and ε‐Caprolactone Block Copolymers by a ‘Poly(L,L‐lactide) Block First’ Route

L,L ‐lactide (LA) and ε‐caprolactone (CL) block copolymers have been prepared by initiating the poly(ε‐caprolactone) (PCL) block growth with living poly(L,L ‐lactide) (PLA*). In the previous attempts to prepare block copolymers this way only random copolyesters were obtained because the PLA* + CL cross‐propagation rate was lower than that of the PLA–CL* + PLA transesterification. The present paper shows that application of Al‐alkoxide active centers that bear bulky diphenolate ligands results in efficient suppression of the transesterification. Thus, the corresponding well‐defined di‐ and triblock copolymers could be prepared.

     

Bioresorbable Hydrogels Prepared Through Stereocomplexation between Poly(L‐lactide) and Poly(D‐lactide) Blocks Attached to Poly(ethylene glycol)

Block copolymers were synthesized by ring‐opening polymerization of L ‐lactide or D ‐lactide in the presence of mono‐ or dihydroxyl poly(ethylene glycol), using zinc metal as catalyst. The resulting copolymers were characterized by various techniques, namely ¹H NMR spectroscopy, differential scanning calorimetry (DSC), X‐ray diffractometry, and Raman spectrometry. The composition of the copolymers was designed such that they were water soluble. Bioresorbable hydrogels were prepared from aqueous solutions containing both poly(L ‐lactide)/poly(ethylene glycol) and poly(D ‐lactide)/poly(ethylene glycol) block copolymers. Rheological studies confirmed the formation of hydrogels resulting from stereocomplexation between poly(L ‐lactide) and poly(D ‐lactide) blocks.

Ring‐opening polymerization of L (D )‐lactide in the presence of dihydroxyl PEG using zinc powder as catalyst.     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

Nano Grape Formation by isotactic‐Poly(methacrylic acid)‐block‐Poly(butyl acrylate)

A novel approach is employed to produce core–corona nanospheres, which introduces a stereoregular hydrophilic part to an amphiphilic block copolymer. The resultant morphology is reported using isotactic‐poly(methacrylic acid)‐block‐poly(butyl acrylate). Infrared spectroscopy revealed a supramolecular interaction, and X ray diffraction revealed the crystallization of the outer isotactic‐poly(methacrylic acid) part. The nanostructure, which looks like a nanosized ‘grape’, was formed when nanospheres and nanofibers coexisted simultaneously and partially fused.

     

Clay Functionalization and Organization for Delamination of the Silicate Tactoids in Poly(L‐lactide) Matrix

Summary: Three kinds of organoclay, i.e., Cloisite15A® (C15A), Cloisite20A® (C20A), and Cloisite30B® (C30B) were modified with silane to prepare twice functionalized organoclay (TFC). The pristine Cloisite® clays and the TFC were melt compounded with poly(L ‐lactide) (PLLA) and morphology of the composites was observed to elucidate the effects of the d₀₀₁ gallery distance, the epoxy content of TFC, and the compatibility between the organic ammonium surfactant and PLLA on the degree of exfoliation of the clay layers.

Plots of I_TFC/I_Cloisite versus epoxy content for PLLA composites with (a) Cloisite15A® (C15A), (b) Cloisite20A® (C20A), (c) Cloisite30B® (C30B).     

Isothermal crystallization behavior of poly(L‐lactide) in poly(L‐lactide)‐block‐poly(ethylene glycol) diblock copolymers

The crystal unit‐cell structures and the isothermal crystallization kinetics of poly(L ‐lactide) in biodegradable poly(L ‐lactide)‐block‐methoxy poly(ethylene glycol) (PLLA‐b‐MePEG) diblock copolymers have been analyzed by wide‐angle X‐ray diffraction and differential scanning calorimetry. In particular, the effects due to the presence of MePEG that is chemically connected to PLLA as well as the PLLA crystallization temperature T_C are examined. Though we observe no variation of both the PLLA and MePEG crystal unit‐cell structures with the block ratio between PLLA and MePEG and T_C, the isothermal crystallization kinetics of PLLA is greatly influenced by the presence of MePEG that is connected to it. In particular, the equilibrium melting temperature of PLLA, T, significantly decreases in the diblock copolymers. When the T_C is high so that the crystallization is controlled by nucleation, because of the decreasing T and thereafter the nucleation density with decreasing PLLA molecular weight, the crystallinity of PLLA also decreases with a decrease in the PLLA molecular weight. While, for the lower crystallization temperature regime controlled by the growth mechanism, the crystallizability of PLLA in copolymers is greater than that of pure PLLA. This suggests that the activation energy for the PLLA segment diffusing to the crystallization site decreases in the diblocks. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2438–2448, 2006     

Poly(D,L-lactide)-block-poly(2-hydroxyethyl acrylate) block copolymers as potential biomaterials for peripheral nerve repair: in vitro and in vivo degradation studies

The properties of poly(D ,L ‐lactide)‐block‐poly(2‐hydroxyethyl acrylate) (PLA‐b‐PHEA) block copolymers by means of in vitro / in vivo (rat) degradation are investigated and compared to those of PLA homopolymer. Over 12 weeks, we observe mass loss and molecular weight decrease. In vitro and in vivo findings are very similar for each polymer tested. When a short PHEA block is used (PLA‐b‐PHEA 15 000–3 000 g · mol^?1, 85/15 wt%), the degradation process is found to be very similar to that of homo‐PLA, and to be typical of a bulk erosion mechanism, with no mass loss observed until week 7 and continuous decrease of molar mass within this timeframe. For a longer PHEA block length within the block copolymer (PLA‐b‐PHEA 15 000–7 500 g · mol^?1, 65/35 wt%), the degradation mechanism is modified, with a significant mass loss observed at early times and only a slight decrease in molar mass. The latter finding is related to the pronounced hydrophilicity and softness of the material induced by the PHEA block, which allow easy diffusion and rapid leakage of the degradation residues from the material towards the aqueous medium. Schwann cells are found to better adhere on spin‐coated films of PLA‐b‐PHEA (85/15 wt%) than on PLA ones. These results show the potential of such hydrophilized PLA‐based copolymers for use in peripheral nerve repair.

     

Poly(ethylene glycol)‐block‐Poly(glycidyl methacrylate) with Oligoamine Side Chains as Efficient Gene Vectors

Well‐defined diblock copolymers, poly(ethylene glycol)‐block‐poly(glycidyl methacrylate)s (PEG‐b‐PGMAs), with different poly(glycidyl methacrylate) (PGMA) chains, were prepared via atom transfer radical polymerization (ATRP) from the same macromolecular initiator 2‐bromoisobutyryl‐terminated poly(ethylene glycol) (PEG). Ethyldiamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA), and polyethyleneimine (PEI) with an of 400 (PEI₄₀₀) were used to decorate PEG‐b‐PGMAs to get the cationic polymers PEG‐b‐PGMA‐ oligoamines. These cationic polymers possessed high buffer capability and could condense plasmid DNA (pDNA) into nanoscaled complexes of 125–530 nm. These complexes showed the positive zeta potential of 20–35 mV at N/P ratios of 10–50. Most of them exhibited very low cytotoxicity and good transfection efficiency in 293T cells. The presence of the serum medium did not decrease the transfection efficiency due to the steric stabilization of the PEG chains.

     

Linear and four‐armed poly(l‐lactide)‐block‐poly(d‐lactide) copolymers and their stereocomplexation with poly(lactide)s

Linear and four‐armed poly(l ‐lactide)‐block‐poly(d ‐lactide) (PLLA‐b‐PDLA) block copolymers are synthesized by ring‐opening polymerization of d ‐lactide on the end hydroxyl of linear and four‐armed PLLA prepolymers. DSC results indicate that the melting temperature and melting enthalpies of poly (lactide) stereocomplex in the copolymers are obviously lower than corresponding linear and four‐armed PLLA/PDLA blends. Compared with the four‐armed PLLA‐b‐PDLA copolymer, the similar linear PLLA‐b‐PDLA shows higher melting temperature (212.3 °C) and larger melting enthalpy (70.6 J g^?1). After these copolymers blend with additional neat PLAs, DSC, and WAXD results show that the stereocomplex formation between free PLA molecular chain and enantiomeric PLA block is the major stereocomplex formation. In the linear copolymer/linear PLA blends, the stereocomplex crystallites (sc) as well as homochiral crystallites (hc) form in the copolymer/PLA cast films. However, in the four‐armed copolymer/linear PLA blends, both sc and hc develop in the four‐armed PLLA‐b‐PDLA/PDLA specimen, which means that the stereocomplexation mainly forms between free PDLA molecule and the inside PLLA block, and the outside PDLA block could form some microcrystallites. Although the melting enthalpies of stereocomplexes in the blends are smaller than that of neat copolymers, only two‐thirds of the molecular chains participate in the stereocomplex formation, and the crystallization efficiency strengthens. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1560–1567     

Electrically Conductive Poly(DL‐lactide)/Chitosan/Polypyrrole Complexes

Summary: The fabrication of novel conductive poly(DL ‐lactide)/chitosan/polypyrrole complex membranes is reported. Using poly(DL ‐lactide)/chitosan blends as matrices and polypyrrole as a conductive component, several kinds of membranes with various compositions are prepared. A percolation threshold of polypyrrole as low as 1.8 wt.‐% is achieved for some membranes by controlling the chitosan proportion between 40 and 50 wt.‐%. SEM images exhibit that the membranes with a low percolation threshold show a two‐phase structure which consists of poly(DL ‐lactide) and chitosan phases. Dielectric measurements indicate that there is limited miscibility between the poly(DL ‐lactide) and chitosan but polypyrrole is nearly immiscible with the other two components. Based on the structural characteristics of the membranes, the polypyrrole particles are suggested to be localized at the interface between two phases.

Dependence of conductivity of complex membranes on the PPy content. (○) PDLLA/PPy, (▪) PDLLA/ch(10)/PPy, (▵) PDLLA/ch(20)/PPy, (•) PDLLA/ch(30)/PPy, (□) PDLLA/ch(40)/PPy, and (▴) PDLLA/ch(50)‐PPy.     

Poly(ferrocenylsilane)‐block‐Polylactide Block Copolymers

A PFS/PLA block copolymer was studied to probe the effect of strong surface interactions on pattern formation in PFS block copolymer thin films. Successful synthesis of PFS‐b‐PLA was demonstrated. Thin films of these polymers show phase separation to form PFS microdomains in a PLA matrix, and ultrathin films (<5 nm) formed SINPATs on silicon and mica. The SINPATs consisted of strongly surface‐adsorbed PLA blocks on top of which the PFS blocks dewetted into sphere‐like features. The lateral spacing between these features was regular, and was typically much larger than the length scale associated with regular block copolymer phase separation.

     

Synthesis of Poly(glycidyl methacrylate)‐block‐Poly(pentafluorostyrene) by RAFT: Precursor to Novel Amphiphilic Poly(glyceryl methacrylate)‐block‐Poly(pentafluorostyrene)

Poly(glycidyl methacrylate) (PGMA) was synthesized by the RAFT method in the presence of 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) chain transfer agent using different [GMA]/[CPDB] molar ratios. The living radical polymerization resulted in controlled molecular weights and narrow polydispersity indices (PDI) of ≈1.1. The polymerization of pentafluorostyrene (PFS) with PGMA as the macro‐RAFT agent yielded narrow PDIs of ≤1.2 at 60 °C and ≤1.5 at 80 °C. The epoxy groups of the PGMA block were hydrolyzed to obtain novel amphiphilic copolymer, poly(glyceryl methacrylate)‐block‐poly(pentafluorostyrene) [PGMA(OH)‐b‐PPFS]. The PGMA epoxy group hydrolysis was confirmed by ¹H NMR and FTIR spectroscopy. DSC investigation revealed that the PGMA‐b‐PPFS polymer was amorphous while the PGMA(OH)‐b‐PPFS displayed a high degree of crystallinity.

     

Preparation of 5‐Fluorouracil‐Poly(L‐lactide) Microparticles Using Solution‐Enhanced Dispersion by Supercritical CO2

Summary: 5‐Fluorouracil‐poly(L ‐lactide) (5‐Fu‐PLLA) microparticles have been prepared by an SEDS process. First, the 5‐Fu is successfully micronized and is then used to produce the 5‐Fu‐PLLA microparticles. The 5‐Fu‐PLLA microparticles synthesized by the SEDS process exhibit a rather spherical shape and a narrow particle size distribution, where it ranges from 615 to 1 990 nm, with a mean particle size of 980 nm. The dichloromethane residue in the 5‐Fu‐PLLA microparticles without any further treatment is 46 ppm. The average drug load and encapsulation efficiency of the 5‐Fu‐PLLA microparticles are 3.05 and 17.8%, respectively. The rate of drug release from the 5‐Fu‐PLLA microparticles shows mainly first‐order kinetics.

Scanning electron spectroscopy image of 5‐Fu‐PLLA microparticles.     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Ring‐Opening Polymerization of ε‐Caprolactone by Poly(ethylene glycol) by an Activated Monomer Mechanism

Summary: The polymerization of ε‐caprolactone (CL) in the presence of HCl · Et₂O by an activated monomer mechanism was performed to synthesize diblock or triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL). The obtained PCLs had molecular weights close to the theoretical values calculated from the CL to PEG molar ratios and exibited monomodal GPC curves. We successfully prepared PEG and PCL block copolymers by a metal‐free method.

The non‐metal catalyzed living ring‐opening polymerisation of ε‐caprolactone by PEG.     

Synthesis and Characterization of Double Crystalline Cyclic Diblock Copolymers of Poly(ε‐caprolactone) and Poly(l(d)‐lactide) (c(PCL‐b‐ PL(D)LA))

The synthesis of symmetric cyclo poly(ε‐caprolactone)–block–poly(l (d )‐lactide) (c(PCL–b–PL(D)LA)) by combining ring‐opening polymerization of ε‐caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self‐assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL‐b‐PDLA and PCL‐b‐PLLA copolymers.

     

Poly(sulfonated phenylene)‐block‐Polyimide Copolymers for Fuel Cell Applications

Novel poly(2‐(3‐sulfo)benzoyl‐1,4‐phenylene)‐block‐polynaphthalimide (PSP‐b‐PI) copolymers were successfully synthesized by Ni(0)‐catalyzed copolymerization of 2,5‐dichloro‐3′‐sulfo‐benzophenone and dichloro‐terminated naphthalimide oligomer. The membranes exhibited a microphase‐separated structure and good hydrolytic stability at 130 °C. They showed a fairly strong anisotropy of membrane swelling with much smaller in‐plane swelling, but a rather weak anisotropy of proton conductivity. The membranes had a fairly high through‐plane conductivity in water and even under low relative humidity. The PSP‐b‐PI copolymer with an IEC of 1.5 meq · g⁻¹ showed high PEFC performance due to the high through‐plane conductivity.

     

Multiple Morphologies and Their Transformation of a Polystyrene‐block‐poly(4‐vinylpyridine) Block Copolymer

Summary: We report the multiple morphologies and their transformation of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) in low‐alkanol solvents. In order to improve the solubility of polystyrene block in alcohol solvents, the solution of block copolymer sample was treated at a higher temperature, and then the influence of rate of decreasing temperature on multiple morphologies (including spheres, rods, vesicles, porous vesicles, large compound vesicles, and large compound micelles) was observed. The transformation of spheres to rods, to tyre‐shaped large compound micelles, and to sphere‐shaped large compound micelles was also realized. The formation mechanisms of the multiple morphologies and their transformation are discussed briefly.

Aggregates of PS‐P4VP formed in butanol by quenching from 110 °C to room temperature.     

Encapsulation of Bovine Serum Albumin in Temperature‐Programmed “Shell‐in‐Shell” Structures

A novel approach to load a hydrophilic bovine serum albumin into drug carriers was proposed in terms of temperature‐programmed “shell‐in‐shell” structures, which were fabricated with poly(N‐isopropylacrylamide), poly(lactide), poly(ethylene glycol), and Au nanoparticles. Spherically well‐defined “shell‐in‐shell” structures were constructed by a modified‐double‐emulsion method (MDEM). The lower critical solubility temperature of the structures was manipulated to 36.4 °C which was confirmed by UV/Vis spectroscopy and DSC (Differential Scanning Calorimetry).

TEM image of the Au@PLLA‐PEG@PNIPAAm‐PDLA structure.