Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.     

Design of Heterocomplementary H‐Bonding RAFT Agents – Towards the Generation of Supramolecular Star Polymers

Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by ¹H NMR and GPC measurements, proving the formation of the supramolecular stars.

     

Gold Nanoparticles Functionalized by a Dextran‐Based pH‐ and Temperature‐Sensitive Polymer

A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.

     

Shielding Effects in Polymer‐Polymer Reactions, 1

Shielding effects of the surrounding arms and chains on the reactive centers taking part in RAFT four‐arm star polymerization following the Z‐group approach are calculated by means of exact enumeration of star/chain samples prepared by Monte Carlo techniques. The shielding effect, which can be relieved when using expanded core moieties, increases with increasing chain (arm) lengths. This leads to a reduction of the contact probability according to a power law with an exponent of −0.4 to −0.45. Additionally, characteristic chain properties and shape parameters are calculated as a function of the distance between the center of the star and the end of the linear chain in order to gain deeper insight into the mechanism of contact formation preceding the actual reaction.

     

Synthesis and Properties of Oligophenylene‐Layered Polymers

We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.

     

Addition‐Fragmentation Chain Transfer Involving Dimers of α‐Methylvinyl Monomers Studied by ESR Spectroscopy: Competition between Fragmentation and Bimolecular Termination

Detection of the adduct radical by ESR spectroscopy and after‐effect ESR measurements of the adduct radical concentrations in the photosensitized polymerization of styrene (St) in the presence of dimers of α‐methylstyrene (MSD) and methyl methacrylate have revealed that the dominant mechanism of adduct radical loss changes from bimolecular termination to fragmentation as the temperature is increased beyond 90 °C for St/MSD.

     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Experimental Requirements for an Efficient Control of Free‐Radical Polymerizations via the Reversible Addition‐Fragmentation Chain Transfer (RAFT) Process

Summary: Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a recent and very versatile controlled radical polymerization technique that has enabled the synthesis of a wide range of macromolecules with well‐defined structures, compositions, and functionalities. The RAFT process is based on a reversible addition‐fragmentation reaction mediated by thiocarbonylthio compounds used as chain transfer agents (CTAs). A great variety of CTAs have been designed and synthesized so far with different kinds of substituents. In this review, all of the CTAs encountered in the literature from 1998 to date are reported and classified according to several criteria : i) the structure of their substituents, ii) the various monomers that they have been polymerized with, and iii) the type of polymerization that has been performed (solution, dispersed media, surface initiated, and copolymerization). Moreover, the influence of various parameters is discussed, especially the CTA structure relative to the monomer and the experimental conditions (temperature, pressure, initiation, CTA/initiator ratio, concentration), in order to optimise the kinetics and the efficiency of the molecular‐weight‐distribution control.

Schematic of the RAFT polymerization.     

One‐Pot Fabrication of Supramolecular Polymer Particles via Situ Polymerization Stringed Assembly of a Two‐Monomer Microemulsion

Summary: A novel method, situ polymerization stringed assembly (SPSA), is proposed to prepare stable solid or hollow supramolecular polymer particles, which are assembled by numerous nanoparticles. By this method, the fabrication of primary nanoparticles (poly(methyl methacrylate), PMMA), the linkers (polyvinylpyrrolidone, PVP, chains) between the nanoparticles, and the final assembled solid or hollow particles could be achieved in just one‐pot by methyl methacrylate (MMA)/N‐vinylpyrrolidone (NVP) microemulsion polymerization under UV irradiation. The structures of the supramolecular particles can be changed from solid to hollow by tuning the mass ratio of MMA/NVP in the microemulsion. AFM, TEM, and SEM experiments are performed to identify the results.

AFM image of the PMMA/PVP solid particles obtained from the photopolymerization of the microemulsion containing 20 wt.‐% MMA, 10 wt.‐% NVP, and 5 × 10⁻² wt.‐% BP.     

Mechanism of Dithiobenzoate‐Mediated RAFT Polymerization: A Missing Reaction Step

Summary: The debate on the mechanism of dithiobenzoate‐mediated RAFT polymerization may be resolved by including the reaction between a propagating radical and the star‐shaped combination product from irreversible termination into the kinetic scheme. By this step, a highly reactive propagating radical and a not overly stable three‐arm star species are transformed into the resonance‐stabilized RAFT intermediate radical and a very stable polymer molecule. The time evolution of concentrations is discussed for the main‐equilibrium range of CDB‐mediated methyl acrylate polymerization.

Illustration of the novel understanding of the RAFT mechanism in dithiobenzoate‐mediated RAFT polymerization.     

A Strategy for Synthesis of Ion‐Bonded Supramolecular Star Polymers by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by ¹H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.

     

Efficient Surface Modification of Divinylbenzene Microspheres via a Combination of RAFT and Hetero Diels‐Alder Chemistry

A combination of reversible addition fragmentation chain transfer (RAFT) polymerization and hetero Diels‐Alder (HDA) chemistry has been utilized to successfully generate functional core‐shell microspheres. Initially, precipitation polymerization in conjunction with the RAFT technique has been employed to synthesize divinylbenzene (DVB) microspheres with surface expressed RAFT groups. Subsequently, HDA cycloaddition has been performed under mild reaction conditions (50 °C, 24 h) with a diene‐functionalized poly(ε‐caprolactone) (PCL). While the successful grafting is immediately evident by optical inspection of the microspheres (color change from purple to white), X‐ray photoelectron spectroscopy (XPS), and attenuated total reflectance spectroscopy (ATR) were additionally employed to characterize the chemical composition and surface functionalization of the microspheres. Further, confocal microscopy was used to confirm the presence of grafted PCL chains after labeling them with rhodamine B.

     

Entanglement Transition in Hyperbranched Polyether‐Polyols

Are hyperbranched polymers capable of forming entanglements? This is the central issue of this contribution. Hyperbranched polyglycerol (hbPG) samples with different molecular weights (600–106 000 g · mol⁻¹), narrow polydispersities (1.2–1.8) and high degrees of branching (≈0.6) were prepared by anionic ring‐opening polymerization. The viscoelastic properties of these polymers with respect to molecular architecture and molar mass were investigated. At low molecular weights “classical” scaling behavior between zero shear viscosity and molecular weight can be observed, whereas between 3 000 and 10 000 g · mol⁻¹ a plateau‐like area is found. The results indicate entanglement dynamics when exceeding a critical molar mass ( ≈ 20 000 g · mol⁻¹) due to entangled hyperbranched polyglycerols.

     

Kinetic Modeling of Semi‐Interpenetrating Polymer Network (SIPN) Process ‐ A Comprehensive Study on the Case of Polyethylene/Polystyrene Semi‐I IPN

A comprehensive kinetic model is developed for a semi‐interpenetrating polymer network (SIPN) process, which involves simultaneous crosslinking, grafting, and degradation. Computational expense has been reduced considerably through a new component decomposition strategy, where a continuous variable approximation and a fixed pivot technique are applied for modeling each component. The inter‐polymer formulation is then reconstructed by a statistical approach. Based on the kinetic parameters obtained from the literature and a series of experiments, the model provides consistent agreement for gel fraction, joint molecular weight distribution (MWD) and polymer composition predicted in the studied cases, showing promising capability for the SIPN industrial application as well as for other polymer composite systems.

     

A General Strategy for Nano‐Encapsulation via Interfacially Confined Living/Controlled Radical Miniemulsion Polymerization

Summary: We propose and demonstrate the utility of an interfacial living/controlled (reversible addition fragmentation chain transfer, RAFT) radical miniemulsion polymerization in nano‐encapsulation. The principles and methodology behind this technique are readily scalable and highly efficient. The living/controlled nature of the system offers great opportunities to tune the properties of the polymer shell‐like thickness, surface functionality, molecular weight, and inner‐wall functionality by simply using a semi‐continuous polymerization technique.

Illustration of encapsulation principles by RAFT interfacial miniemulsion polymerization.     

One‐Component Bimolecular Photoinitiating Systems, 2

The compounds 2‐thioxanthone‐thioacetic acid and 2‐(carboxymethoxy)thioxanthone, bimolecular photoinitiators for free radical polymerization, are synthesized and characterized. Their capability to act as initiators for the polymerization of methyl methacrylate was examined. The postulated mechanism is based on the intermolecular electron‐transfer reaction of the excited photoinitiator with the sulfur or oxygen atom of the ground state of the respective photoinitiator followed by decarboxylation. The resulting alkyl radicals initiate the polymerization.

Structures of the photoinitiators.     

Synthesis and Dispersion Characteristics of Multi‐Walled Carbon Nanotube Composites with Poly(methyl methacrylate) Prepared by In‐Situ Bulk Polymerization

Multi‐walled carbon nanotubes (MWNT) purified by acidic solution were processed with PMMA via an in‐situ polymerization. Experimental evidences indicate the role of radical initiator (AIBN) and MWNT, showing increases of polymerization rate and MWNT diameter. Induced radicals on the MWNT by AIBN were found to trigger the grafting of PMMA. Moreover, the solvent cast film showed a better nanoscopic dispersion of MWNT and possibilities of CNT composites in engineering applications.

Fractured surface of multi‐walled carbon nanotube composite with PMMA prepared by in‐situ bulk polymerization.     

RAFT Polymerization and Thiol Chemistry: A Complementary Pairing for Implementing Modern Macromolecular Design

Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied reversible deactivation radical polymerization methods for the production of well‐defined polymers. After polymerization, the RAFT agent end‐group can easily be converted into a thiol, opening manifold opportunities for thiol modification reactions. This review is focused both on the introduction of functional end‐groups using well‐established methods, such as thiol‐ene chemistry, as well as on creating bio‐cleavable disulfide linkages via disulfide exchange reactions. We demonstrate that thiol modification is a highly attractive and efficient chemistry for modifying RAFT polymers.

     

Temperature‐Responsive Glycopolymer Brushes Synthesized via RAFT Polymerization Using the Z‐group Approach

Summary: Stimuli‐responsive glycopolymer brushes composed of N‐acryloyl glucosamine (AGA) and N‐isopropylacrylamide (NIPAAm) were prepared using RAFT polymerization. The RAFT agent was immobilized on the surface of a treated silicon waver via covalent attachment using the Z‐group. PAGA and PNIPAAm brushes showed a linear increase in brush thickness with the consumption of monomer in solution. The polymers generated in solution confirm the living behavior with the molecular weight increasing linearly with monomer conversion while the molecular weight distribution remains narrow. Additionally, the ability of PAGA brushes to grow further in the presence of NIPAAm reveals the presence of an active RAFT end group indicative of a living system. PAGA and PNIPAAm homopolymer brushes up to 30 nm were grown using this technique. PAGA brushes were utilized for further chain extension to generate stimuli‐responsive brushes with block structures of PAGA and PNIPAAm. The PAGA‐block‐PNIPAAm brushes were found to grow in size with the consumption of NIPAAm. Contact angle measurements confirm the suggested mechanism showing that the second monomer is incorporated between the first layer and the silicon surface as expected using the Z‐group approach.

Structure of the stimuli‐responsive glycopolymer brushes.     

Preparation of Well‐Defined PVOH/C60 Nanohybrids by Cobalt‐Mediated Radical Polymerization of Vinyl Acetate

Summary: Poly(vinyl acetate) chains end‐capped by a Co(acac)₂ complex [PVAc‐Co(acac)₂] were prepared by bulk cobalt‐mediated radical polymerization (CMRP) of vinyl acetate and used for grafting fullerene (C60) with four PVAc arms at low temperature (30 °C). A photoactive water‐soluble poly(vinyl alcohol)/C60 nanohybrid was then prepared by hydrolysis of the PVAc arms of the nanohybrid. Because of photoactivity and very low cytotoxicity, this type of water‐soluble nanohybrid is very promising for the photodynamic cancer therapy.

Strategy for the preparation of PVAc/C60 nanohybrid and hydrolysis of PVAc/C60 nanohybrid into PVOH/C60 nanohybrid.