When Self‐Assembly Fails: Stepwise Metal‐Directed Synthesis of [2]Catenanes

On the attempted synthesis of a series of homo‐ and heterotrimetallic [2]catenanes by the self‐assembly of a 2‐(pyridin‐4‐ylmethyl)‐2,7‐diazapyrenium ligand, (ethylenediamine)palladium(II) or platinum(II) nitrate, and a dioxoaryl bis(N‐monoalkyl‐4,4′‐bipyridinium) salt as building blocks, both the one‐pot direct self‐assembly of the components and the so called “magic ring” approach fail to produce the expected trinuclear [2]catenanes under thermodynamically driven conditions. However, one of the target supramolecules is obtained by following a stepwise protocol, consisting of the threading of a dinuclear Pt^II metallacycle and the dioxoaryl bis(N‐monoalkyl‐4,4′‐bipyridinium) axle, followed by kinetically controlled Pt^II‐directed cyclization of the corresponding pseudorotaxane.     

Cyclic [2]Catenane Dimers,Trimers, and Tetramers

Dimeric, trimeric, and tetrameric cyclic [2]catenanes have been prepared directly through one‐pot sodium‐ion‐templated dynamic imine formation from a diamine and a tetraaldehyde. NaBH₄ mediated reduction of the labile imino bonds of these cyclic [2]catenane oligomers, followed by methylation of the resulting secondary amino groups enabled the isolation and characterization of oligomeric cyclic [2]catenanes as stable, covalently linked compounds.     

pH‐Controllable Supramolecular Systems

Proton, all that matters! This Focus Review surveys representative examples of pH‐controllable supramolecular systems with interesting features and state‐of‐the‐art applications, which can lead to the construction of meaningful molecular machines for electronic and biological applications that can be controlled by simple perturbation with acid and base.

     

Nitrite‐Templated Synthesis of Lanthanide‐Containing [2]Rotaxanes for Anion Sensing

The first anion‐templated synthesis of a lanthanide‐containing interlocked molecule is demonstrated by utilizing a nitrite anion to template initial pseudorotaxane formation. Subsequent stoppering of the interpenetrated assembly allows for the preparation of a lanthanide‐functionalized [2]rotaxane in high yield. Following removal of the nitrite anion template, the europium [2]rotaxane host is demonstrated to recognize and sense fluoride selectively.     

Unexpected Self‐Assembly of a Homochiral Metallosupramolecular M4L4 Catenane

Two enantiomerically pure 9,9′‐spirobifluorene‐based bis(pyridine) ligands 1 and 2 were prepared to study their self‐assembly behavior upon coordination to cis‐protected palladium(II) ions. Whereas the sterically more demanding ligand, 2 , gave rise to the expected dinuclear metallosupramolecular M₂L₂ rhombi, the sterically less demanding ligand, 1 , acts as a template to give rise to a homochiral metallosupramolecular M₄L₄ catenane.     

含有二十分子水簇的金属—水二维网的构成

以醋酸铜、1,10-邻菲啰啉和顺丁烯二酸在去离子水和乙醇的混合溶液中反应得到了配合物单晶[Cd(phen)2(male)(H2O)]·9.5H2O (1) (phen＝1,10－邻菲啰啉; H2male＝顺丁烯二酸)。采用元素分析、红外光谱和热重分析对化合物进行了表征。用X－射线单晶衍射分析了晶体结构,结果表明：在化合物１中存在着由二十分子水簇构成的结构新颖的一维水链。一维水链和[Cd(phen)2(male)(H2O)]依靠氢键作用构成了独特的包含金属－水网的二维结构。     

Unusual Stepwise Protonation and J‐Aggregation of meso‐Tetrakis(N‐methylpyridinium‐4‐yl)porphine on Binding Poly(sodium vinylsulfonate)

The binding of a tetracationic porphyrin to a highly charged polymer like poly(sodium vinylsulfonate) has been investigated over a wide pH range and under various experimental conditions. We present evidence that, depending on the pH, the high electrostatic field exerted by the polymer stabilizes the diprotonated form of the free base porphyrin at unusual pH values or otherwise causes the formation of H‐type aggregates. In particular, at a low polymer concentration, lowering the pH at first allows the formation of the diacid species then it determines its reorganization in close‐packed J‐type aggregates. The employment of various metallo‐derivatives of the title porphyrin enables a better insight into the nature of all the detected species.     

Two‐Dimensional Assembly Based on Flow Supramolecular Chemistry: Kinetic Control of Molecular Interactions Under Solvent Diffusion

Self‐assembly of porphyrin molecules can be controlled kinetically to form structures with lengths extending from the nano‐ to the micrometer scale, through a programmed solvent‐diffusion process in designed microflow spaces. Temporal solvent structures generated in the microflow were successfully transcribed into molecular architectures.     

Supramolecular ssDNA Templated Porphyrin and Metalloporphyrin Nanoassemblies with Tunable Helicity

Free‐base and nickel porphyrin–diaminopurine conjugates were formed by hydrogen‐bond directed assembly on single‐stranded oligothymidine templates of different lengths into helical multiporphyrin nanoassemblies with highly modular structural and chiroptical properties. Large red‐shifts of the Soret band in the UV/Vis spectroscopy confirmed strong electronic coupling among assembled porphyrin–diaminopurine units. Slow annealing rates yielded preferentially right‐handed nanostructures, whereas fast annealing yielded left‐handed nanostructures. Time‐dependent DFT simulations of UV/Vis and CD spectra for model porphyrin clusters templated on the canonical B‐DNA and its enantiomeric form, were employed to confirm the origin of observed chiroptical properties and to assign the helicity of porphyrin nanoassemblies. Molar CD and CD anisotropy g factors of dialyzed templated porphyrin nanoassemblies showed very high chiroptical anisotropy. The DNA‐templated porphyrin nanoassemblies displayed high thermal and pH stability. The structure and handedness of all assemblies was preserved at temperatures up to +85 °C and pH between 3 and 12. High‐resolution transition electron microscopy confirmed formation of DNA‐templated nickel(II) porphyrin nanoassemblies and their self‐assembly into helical fibrils with micrometer lengths.     

Tetra- and octalactam macrocycles and catenanes with exocyclic metal coordination sites: versatile building blocks for supramolecular chemistry

The synthesis of a new tetralactam macrocycle and the simultaneous formation of catenanes and larger octalactam macrocycles is reported. These species bear 2,2'-biquinoline moieties suitably positioned to bind a metal center at the outer periphery of the macrocycles. (1)H NMR chemical shifts permit the unambiguous distinction of transoid and cisoid conformations of the biquinoline moiety, thereby allowing an unequivocal identification of the catenane and octalactam structures, despite the fact that both have the same elemental composition and bear identical structural subunits. With the aid of an anion template effect, rotaxanes can be prepared from the smaller tetralactam macrocycle. These reveal significantly altered requirements in terms of the stopper size as compared to previously reported tetralactam wheels. Several copper(I)-mediated dimers and a (bpy)(2)Ru(II) complex (bpy=2,2'-bipyridine) have been synthesized from the tetralactam macrocycle and the rotaxanes. The anion binding abilities of the tetralactam macrocycle and its (bpy)(2)Ru(II) complex in DMSO have been compared by (1)H NMR titration experiments, which revealed significantly enhanced binding by the metal complex. Mass spectrometry has been used to study the potential formation of larger assemblies of copper(I) and the catenane built-up from two tetralactam macrocycles. Indeed, a 2:2 complex was identified. In contrast, the octalactam macrocycle of the same elemental composition yields only 1:1 complexes, with the Cu(I) ion connecting its two biquinoline moieties in the center of a figure-eight-shaped molecule. Molecular modeling studies support the structural assignments made.     

Exploring Supramolecular Self‐Assembly of Tetraarylporphyrins by Halogen Bonding: Crystal Engineering with Diversely Functionalized Six‐Coordinate Tin(L)2–Porphyrin Tectons

This study targets the construction of porphyrin assemblies directed by halogen bonds, by utilizing a series of purposely synthesized Sn(axial ligand)₂–(5,10,15,20‐tetraarylporphyrin) [Sn(L)₂‐TArP] complexes as building units. The porphyrin moiety and the axial ligands in these compounds contain different combinations of complimentary molecular recognition functions. The former bears p‐iodophenyl, p‐bromophenyl, 4′‐pyridyl, or 3′‐pyridyl substituents at the meso positions of the porphyrin ring. The latter comprises either a carboxylate or hydroxy anchor for attachment to the porphyrin‐inserted tin ion and a pyridyl‐, benzotriazole‐, or halophenyl‐type aromatic residue as the potential binding site. The various complexes were structurally analyzed by single‐crystal X‐ray diffraction, accompanied by computational modeling evaluations. Halogen‐bonding interactions between the lateral aryl substituents of one unit of the porphyrin complex and the axial ligands of neighboring moieties was successfully expressed in several of the resulting samples. Their occurrence is affected by structural (for example, specific geometry of the six‐coordinate complexes) and electronic effects (for example, charge densities and electrostatic potentials). The shortest intermolecular I???N halogen‐bonding distance of 2.991 Å was observed between iodophenyl (porphyrin) and benzotriazole (axial ligand) moieties. Manifestation of halogen bonds in these relatively bulky compounds without further activation of the halophenyl donor groups by electron‐withdrawing substituents is particularly remarkable.     

Unexpected Self‐Sorting Self‐Assembly Formation of a [4:4] Sulfate:Ligand Cage from a Preorganized Tripodal Urea Ligand

The design and synthesis of tripodal ligands 1 – 3 based upon the N‐methyl‐1,3,5‐benzenetricarboxamide platform appended with three aryl urea arms is reported. This ligand platform gives rise to highly preorganized structures and is ideally suited for binding SO₄^2? and H₂PO₄^? ions through multiple hydrogen‐bonding interactions. The solid‐state crystal structures of 1 – 3 with SO₄^2? show the encapsulation of a single anion within a cage structure, whereas the crystal structure of 1 with H₂PO₄^? showed that two anions are encapsulated. We further demonstrate that ligand 4 , based on the same platform but consisting of two bis‐urea moieties and a single ammonium moiety, also recognizes SO₄^2? to form a self‐assembled capsule with [4:4] SO₄^2?: 4 stoichiometry in which the anions are clustered within a cavity formed by the four ligands. This is the first example of a self‐sorting self‐assembled capsule where four tetrahedrally arranged SO₄^2? ions are embedded within a hydrophobic cavity.     

Fabrication of Microspheres from Phthalimide‐Substituted Porphyrin Derivatives

Microspheres were fabricated from phthalimide‐substituted porphyrin derivatives. Microscopic analysis showed that the structures of the supramolecular assemblies synthesized in the present study were spherical, with diameters in the sub‐micrometer to micrometer range. The size of the microspheres could be controlled by changing the concentration of the casting solution. The spectroscopic properties of the microspheres were measured to determine the influence of their structural components. Thermal studies indicated that the temperature at which these structures became unstable was lower than the bulk melting point. During I–V measurements on devices composed of these microspheres, it was found that the current increased upon light irradiation, and the characteristic photoresponse properties of these devices were reproducible.     

Synthesis of Diacetylene‐Containing Peptide Building Blocks and Amphiphiles,Their Self‐Assembly and Topochemical Polymerization in Organic Solvents

A series of functional iodoacetylenes was prepared and converted into the corresponding diacetylene‐substituted amino acids and peptides via Pd/Cu‐promoted sp–sp carbon cross‐coupling reactions. The unsymmetrically substituted diacetylenes can be incorporated into oligopeptides without a change in the oligopeptide strand's directionality. Thus, a series of oligopeptide‐based, amphiphilic diacetylene model compounds was synthesized, and their self‐organization as well as their UV‐induced topochemical polymerizability was investigated in comparison to related polymer‐substituted macromonomers. Solution‐phase IR spectroscopy, gelation experiments, and UV spectroscopy helped to confirm that a minimum of five N‐H???O?C hydrogen‐bonding sites was required in order to obtain reliable aggregation into stable β‐sheet‐type secondary structures in organic solvents. Furthermore, the non‐equidistant spacing of these hydrogen‐bonding sites was proven to invariably lead to β‐sheets with a parallel β‐strand orientation, and the characteristic IR‐spectroscopic signatures of the latter in organic solution was identified. Scanning force micrographs of the organogels revealed that compounds with six hydrogen‐bonding sites gave rise to high aspect ratio nanoscopic fibrils with helical superstructures but, in contrast to the related macromonomers, did not lead to uniform supramolecular polymers. The UV‐induced topochemical polymerization within the β‐sheet aggregates was successful, proving parallel β‐strand orientation and highlighting the effect of the number and pattern of N‐H???O?C hydrogen‐bonding sites as well as the hydrophobic residue in the molecular structure on the formation of higher structures and reactivity.