Synthesis of η6‐(4a‐Methyl‐1,2,3,4‐tetrahydro‐4aH‐carbazole)‐tricarbonylchromium complex and stereoelectronic behaviour with organolithium reagents: an apparent frontal attack to the (CO)3Cr group

The synthesis of η⁶‐(4a‐methyl‐1,2,3,4‐tetrahydro‐4aH‐carbazole)tricarbonylchromium ( 3 ) is described, and its reactivity with organolithium reagents have been analysed. The addition of RLi (R= H, Me, n‐Bu, tert‐Bu) to 3 affords the corresponding endo/exo tricarbonylchromium complexes of cis‐4a‐methyl‐9a‐substituted‐1,2,3,4‐tetrahydro‐4aH‐carbazole, which permit the consideration of the stereoelectronic behaviour of the tricarbonylchromium group on 4a‐methyl and the 9a substituent or on the methylenes of the cyclohexene moiety in the complexes.     

On the Solution Behaviour of Benzyllithium⋅(−)‐Sparteine Adducts and Related Lithium Organyls – A Case Study on Applying 7Li,15N{1H} HMQC and Further NMR Methods,Including Some Investigation into Asymmetric Synthesis

2D ⁷Li,¹⁵N heteronuclear shift correlation through scalar coupling has successfully been applied to several lithium organyls consisting of polydentate N ligands such as N,N,N′,N′‐tetramethylethylenediamine (tmeda), N,N,N′,N′,N′′‐pentamethyldiethylentriamine (pmdta) and (?)‐sparteine. Structural insights on the conformation of benzyllithium ? pmdta ( 5 ) in a toluene solution and the strength of ion pairing in combination with PGSE NMR measurements, ¹H,¹H‐NOESY and ¹H,⁷Li‐HOESY experiments are presented. By studying in detail the formation of 5 in solution, a transient species has been observed for the first time and assigned to a pre‐complex of nBuLi and pmdta. In addition, the solution behaviour of the complex formed between benzyllithium and (?)‐sparteine ( 8 ) has been studied by PGSE and multinuclear NMR spectroscopy. The straightforward synthesis and first applications in asymmetric lithiations are also reported, which show that the new system benzyllithium ? (?)‐sparteine ( 8 ) provide poorer enantioselective induction than the classical nBuLi ? (?)‐sparteine ( 6 ). The results were supported by deprotonation experiments confirming that the formation of 8 relies on two relevant factors, namely temperature and lithiating reagent. The existence of 8 may thus interfere with the asymmetric induction when the system nBuLi ? (?)‐sparteine is used in the enantioselective deprotonations of N‐Boc‐N‐(p‐methoxyphenyl)‐benzylamine conducted in toluene.     

Novel Asymmetric Formylation of Aromatic Compounds: Enantioselective Synthesis of Formyl 7,8‐Dipropyltetrathia[7]helicenes

Asymmetric formylation of aromatic compounds is virtually unexplored. We report the synthesis and evaluation of a library including 20 new chiral formamides in the kinetic resolution of 7,8‐dipropyltetrathia[7]helicene, affording the corresponding formyl‐ or diformylhelicenes in up to 73 % ee, making enantiopure compounds available by recrystallisation. With the N,N‐disubstituted formamides used in this study, the best enantioselectivity has been achieved with R¹=iPr, R²=Me, R³=H, R⁴=1‐naphthyl or its 1‐pyrenyl equivalent.     

Synthesis and Structures of New Oxidation/ Cycloaddition Products of λ3‐Cyclodiphosphazanes

Reaction of the cyclodiphosphazane [(OC₄H₈N)P(μ‐N‐t‐Bu)₂P(HN‐t‐Bu)] ( 1 ) with an equimolar quantity of diisopropyl azodicarboxylate afforded the phosphinimine product [(OC₄H₈N)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂ ‐i‐Pr)NHCO₂‐i‐Pr] ( 6 ) having a P^III‐N‐P^V skeleton. Similar products [(t‐BuNH)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂Et)NHCO₂Et] ( 7 ) and [(CO₂‐i‐Pr)HNN(CO₂‐i‐Pr)](t‐BuN=P(μ‐N‐t‐Bu)₂POCH₂CMe₂CH₂O[P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂‐i‐Pr)NH(CO₂‐i‐Pr)] ( 8 ) were spectroscopically characterized in the reaction of [(t‐BuNH)P‐N‐t‐Bu]₂ ( 2 ) and [(t‐BuNH)P(μ‐N‐t‐Bu)₂POCH₂CMe₂CH₂OP(μ‐N‐t‐Bu)₂P(NH‐t‐Bu)] ( 3 ) with diethyl‐ and diisopropyl azodicarboxylate, respectively. By contrast, the reaction of [(μ‐t‐BuN)P]₂[O‐6‐t‐Bu‐4‐Me‐C₆H₂]₂CH₂ ( 4 ) and [(C₅H₁₀N)P‐μ‐N‐t‐Bu]₂ ( 5 ) with diisopropyl azodicarboxylate afforded the mono‐ and bis‐oxidized compounds [(O)P(μ‐N‐t‐Bu)₂P][O‐6‐t‐Bu‐4‐Me‐C₆H₂]₂CH₂ ( 9 ) and [(C₅H₁₀N)(O)P‐μ‐N‐t‐Bu]₂ ( 10 ), respectively. Oxidative addition of o‐chloranil to 7 and its DIAD analogue [(t‐BuNH)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂‐i‐Pr)NHCO₂‐i‐Pr] ( 11 ) afforded [(C₆Cl₄‐1, 2‐O₂)(t‐BuNH)P(μ‐N‐t‐Bu)₂P=N‐t‐Bu)(N(CO₂R)NHCO₂R] [R = Et ( 12 ) and i‐Pr ( 13 )] containing tetra‐ and pentacoordinate P^V atoms in the cyclodiphosphazane ring. The structures of 6 , 9 , 12 and 13 have been confirmed by X‐ray structure determination. For comparison, the X‐ray structure of the double cycloaddition product [(C₆Cl₄‐1, 2‐O₂)(t‐BuNH)PN‐t‐Bu]₂ ( 14 ), obtained from the reaction of 2 with two mole equivalents of o‐chloranil is also reported.     

Synthesis and X‐ray Structures of the Polycyclic Dimers {[PhB(μ‐NtBu)2AsN(tBu)H]LiI}2 and [PhB(μ‐NtBu)2AsN(tBu)Li]2

The metathesis of [PhB(μ‐NtBu)₂]AsCl and tBuN(H)Li in 1:1 molar ratio in diethyl ether produced the amido derivative [PhB(μ‐NtBu)₂AsN(tBu)H] ( 1 ) in good yield. The lithiation of 1 with one equivalent of nBuLi afforded the lithium salt [PhB(μ‐NtBu)₂AsN(tBu)Li] ( 2a ). Both 1 and 2a were characterized by multinuclear NMR spectroscopy. The crystal structure of 2a is comprised of a U‐shaped, centrosymmetric dimer in which the monomeric [PhB(μ‐NtBu)₂AsN(tBu)]^?Li⁺ units are linked by Li‐N interactions to give a six‐rung ladder. Oxidation of 2a with one‐half equivalent of I₂ in diethyl ether resulted in hydrogen abstraction from the solvent to give the dimeric lithium iodide adduct {[PhB(μ‐NtBu)₂AsN(tBu)H]LiI}₂ ( 1 ·LiI) with a central Li₂I₂ ring.     

π‐Excess Aromatic σ2P Ligands: Formation of a Heterocyclic 1,2‐Diphosphine by the Addition of tBuLi and Subsequent Inverse Addition of the Product at the P=C Bonds of Two Molecules of 1‐Neopentyl‐1,3‐benzazaphosphole

The reactivity of tBuLi (pentane) toward the N‐neopentyl‐substituted π‐excess P=CH–N heterocycle 1 depends on the solvent (tetrahydrofuran, diethyl ether, hexane, and toluene) and reaction conditions. Trapping of the resulting organolithium compounds with CO₂/ClSiMe₃, ClSiMe₃, or EtI led to various products indicating CH lithiation ( 1a , b ), normal addition of tBuLi at the P=C bond (E/Z ‐2a , b ), inverse addition of the primary addition product 2_Li at the P=C bond of a second molecule 1 , affording 3‐tert‐butyl‐2,2’‐bis(1,3‐benzazaphospholines) 3 , or inverse addition of tBuLi ( 4b,c ). The formation of 3 demonstrates a novel route to asymmetric heterocyclic 1,2‐diphosphine ligands. The structure elucidation of the new compounds is based on their ³¹P and ¹³C NMR data with conclusive chemical shifts and P–C coupling constants, that of the isolated PH‐functionalized diphosphine 3 on crystal structure analysis.     

A Precoordination Complex of 1,2,3‐Trimethyl‐1,3,5‐triazacyclohexane with tert‐Butyllithium as Key Intermediate in Its Methylene Group Deprotonation

α‐Lithiated tertiary methylamines are important building blocks in all fields of chemistry, such as for the synthesis of new ligand or catalyst systems. However, the access to these compounds is still limited and the reaction mechanism, in general, not fully understood. We present herein X‐ray diffraction analyses of organolithium compounds with 1,2,3‐trimethyl‐1,3,5‐triazacyclohexane ( 1 ), such as a precoordination adduct of tert‐butyllithium, [(tBuLi)₃?C₆H₁₅N₃], which represents a potential intermediate of the lithiation of the methylene group of this ligand. By means of molecular structures and computational studies, the regioselectivity of this deprotonation reaction can be understood. Furthermore, the tBuLi adduct gives a hint to an alternative deaggregation process of organolithium compounds.     

Asymmetric Substitutions of 2‐Lithiated N‐Boc‐piperidine and N‐Boc‐azepine by Dynamic Resolution

Proton abstraction of N‐tert‐butoxycarbonyl‐piperidine (N‐Boc‐piperidine) with sBuLi and TMEDA provides a racemic organolithium that can be resolved using a chiral ligand. The enantiomeric organolithiums can interconvert so that a dynamic resolution occurs. Two mechanisms for promoting enantioselectivity in the products are possible. Slow addition of an electrophile such as trimethylsilyl chloride allows dynamic resolution under kinetic control (DKR). This process occurs with high enantioselectivity and is successful by catalysis with substoichiometric chiral ligand (catalytic dynamic kinetic resolution). Alternatively, the two enantiomers of this organolithium can be resolved under thermodynamic control with good enantioselectivity (dynamic thermodynamic resolution, DTR). The best ligands found are based on chiral diamino‐alkoxides. Using DTR, a variety of electrophiles can be used to provide an asymmetric synthesis of enantiomerically enriched 2‐substituted piperidines, including (after Boc deprotection) the alkaloid (+)‐β‐conhydrine. The chemistry was extended, albeit with lower yields, to the corresponding 2‐substituted seven‐membered azepine ring derivatives.     

Silver(I)‐Catalyzed Diastereoselective Synthesis of anti‐1,2‐Hydroxyboronates

A catalytic protocol for the diastereoselective synthesis of anti‐1,2‐hydroxyboronates is described. The process provides access to secondary alkyl organoborons. The deborylative 1,2‐addition reactions of alkyl 1,1‐diborons proceed in the presence of a silver(I) salt with either KOtBu or nBuLi as an activator. The catalytic diastereoselective protocol can be extended to aryl, alkenyl, and alkyl aldehydes with up to 99:1 d.r.     

Stable N‐Heterocyclic Germylenes of the Type [Fe{(η5‐C5H4)NR}2Ge] and Their Oxidation Reactions with Sulfur,Selenium, and Diphenyl Diselenide

Three new N‐heterocyclic germylenes of the type [Fe{(η⁵‐C₅H₄)NR}₂Ge] ( 1R Ge) containing particularly bulky alkyl [R = 2‐adamantyl (Ad), 1,1,2,2‐tetramethylpropyl (Pr*)] or aryl substituents [R = 2,6‐diisopropylphenyl (Dipp)] were prepared and structurally characterized, in two cases (R = Ad, Dipp), by single‐crystal X‐ray diffraction. Together with the previously described homologues with R = trimethylsilyl (TMS), tert‐butyl (tBu), and mesityl (Mes) their oxidative addition reactions with S₈ and Se₈ were studied, which afforded compounds of the type [ 1R Ge(μ‐E)]₂ (E = S, Se). The low solubility of most of these products severely hampered their purification and characterization. Nevertheless, their structural characterization by single‐crystal X‐ray diffraction was possible in six cases (E = S, R = Ad, Pr*; E = Se, R = Ad, Pr*, Mes, Dipp). No solubility problems were encountered in oxidative addition reactions with diphenyl diselenide, affording products of the type 1R Ge(SePh₂)₂, whose crystal structures could be determined in four cases (R = TMS, tBu, Mes, Dipp). Short intramolecular CH ··· Se contacts compatible with hydrogen bonds were observed for [ 1Ad Ge(μ‐Se)]₂, [ 1Pr* Ge(μ‐Se)]₂, and 1tBu Ge(SePh₂)₂.     

Anionic polymerization of 4‐phenyl‐1‐buten‐3‐yne derivatives bearing electron‐withdrawing groups

The anionic polymerization of derivatives of 4‐phenyl‐1‐buten‐3‐yne was carried out to investigate the effect of substituents on the polymerization behavior. The polymerization of 4‐(4‐fluorophenyl)‐1‐buten‐3‐yne and 4‐(2‐fluorophenyl)‐1‐buten‐3‐yne in tetrahydrofuran at −78 °C with n‐BuLi/sparteine as an initiator gave polymers consisting of 1,2‐ and 1,4‐polymerized units in quantitative yields with ratios of 80/20 and 88/12, respectively. The molecular weights of the polymers were controlled by the ratio of the monomers to n‐BuLi, and the distribution was relatively narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), supporting the living nature of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1016–1023, 2001     

A convenient way of making arsoxanes (RAsO)n,X‐ray crystal structure of (m‐F3CC6H4AsO)4

The reactions of RLi (R = t‐Bu, m‐F₃CC₆H₄) with bis(dimethylamino)chloroarsine in diethyl ether at room temperature result in the formation of t‐butyl‐bis(dimethylamino)arsine ( 1 ) and m‐trifluromethylphenyl‐bis(dimethylamino)arsine ( 2 ). Compounds 1 and 2 were hydrolysed in water solution in the presence of sodium carbonate to give the oxides (t‐BuAsO)_n ( 3 ) and (m‐F₃CC₆H₄AsO)_n ( 4 ) respectively. The X‐ray crystal structure of 4 shows the molecule to be cyclotetrameric with pyramidal arsenic. Copyright © 2005 John Wiley & Sons, Ltd.     

Anionic polymerization of 9‐vinylanthracene with the alkyllithium/amine system

The anionic polymerization of 9‐vinylanthracene (VAN) with the alkyllithium (RLi)/amine system was examined to explore new initiator systems that could polymerize VAN at moderate temperatures in hydrocarbon solvents. Important factors in the anionic polymerization of VAN were found to be the high nucleophilicity of the RLi/amine and poly(9‐vinylanthracenyl)lithium (PVANLi)/amine systems, the low steric hindrance of the amine molecule, and good solubility of PVANLi during the polymerization. The t‐butyllithium (t‐BuLi)/N,N,N',N'‐tetramethylethylenediamine (TMEDA) (1.00/1.25) system achieved the highest PVAN yield in toluene at room temperature (ca. 25°C), although the limitations of yield and the number average molecular weight (M_n) were around 90 wt% and 2000, respectively. The results obtained from spectrum analyses suggested that the anionically polymerized PVAN would be considered a favorable polymer for the preparation of new luminescent materials. Copyright © 2009 John Wiley & Sons, Ltd.     

Living tert‐butyllithium initiated anionic polymerization of 2‐vinylnaphthalene in toluene‐tetrahydrofuran mixtures

The tert‐butyllithium (t‐BuLi) initiated polymerization of carefully purified 2‐vinylnaphthalene in toluene containing small amounts of tetrahydrofuran with respect to t‐BuLi proceeds on a timescale of several hours without significant deactivation and allows the synthesis of very narrow molecular weight distribution poly‐(2‐vinylnaphthalene) (P2VN) (polydispersities as low as 1.04) and molecular weights between 1000 and 20,000. The absence of P2VN‐Li deactivation at these conditions is also indicated by high degrees of trimethylsilyl end functionalization (>95%) and coupling with dibromoxylene. The respective polymerizations of conventionally purified monomer reveal a complex polymerization profile consistent with deactivation by 2‐acetylnaphthalene during the early stages of the reaction. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3034–3041, 2001     

Reactions at the B–B Bond of Tri‐tert‐butylazadiboriridine NB2R3: Ring Extensions

The OCO carboxylate unit of pivalic acid adds to the B–B bond of the azadiboriridine NB₂R₃ ( 1 a , R = tBu) to give the chiral heterocyclohexadiene 2 a ; the enantiomers of 2 a are transformed into one another by a [1,3] sigmatropic hydride transfer along the B–N–B ring fragment. The azadiboracyclopentanes 3 a – e are formed from 1 a and the alkenes ethene, propene, isobutene, (trimethylsilyl)ethene, and 2,3‐dimethyl‐1‐butene. Only one double bond of cyclopentadiene and 1,3‐butadiene reacts in the same way to give 3 f , g , respectively, and both of the double bonds of 1,3‐butadiene react with an excess of 1 a to give 3 h , which is obtained in a 9 : 1 mixture of racemate and meso‐isomer; the meso‐isomer crystallizes in the space group P2₁/n. The corresponding diazadiboracyclopentane 3 i and the triazadiboracyclopentane 3 j are formed from 1 a and N‐phenyl benzaldimine or azobenzene, respectively. Ethyne and 1 a give either the azadiboracyclopentene 4 a (1 : 1) or the diazatetraborabicyclo[3.3.0]octane 3 k (1 : 2). The phosphaalkyne P≡C–tBu and 1 a  analogously yield the heterocyclopentene 4 c . The insertion of SitBu₂ into 1 a to give the azasiladiboracyclobutane 5 a is achieved by applying Li powder and tBu₂SiCl₂. The hitherto unknown azadiboriridines BN₂R₂R′ (R = tBu; R′ = 1‐iPr, 2‐Mes, 2‐CMe₂Et: 1 b – d ) were synthesized by the chloroboration of the iminoboranes RB≡NiPr and RB≡NR with RBCl₂, MesBCl₂, and (EtMe₂C)BCl₂, respectively, and subsequent dechlorination of the isolated and characterized diborylamines Cl–BR–NiPr–BR–Cl ( 6 a ), Cl–BR–NR–BMes–Cl ( 6 b ), and Cl–BR–NR–B(CMe₂Et)–Cl ( 6 c ), respectively, with lithium (Mes = mesityl).The azadiboriridine 1 b dimerizes to give the diaza‐nido‐hexaborane 7 a , whereas 1 c and 1 d are storable at room temperature. The product 1 c crystallizes as a racemate in the space group P2₁/c; its ring geometry differs from that of the known N‐mesityl isomer.     

Origin of the π‐Facial Stereoselectivity in the Addition of Nucleophilic Reagents to Chiral Aliphatic Ketones as Evidenced by High‐Level Ab Initio Molecular‐Orbital Calculations

Ab initio molecular‐orbital (MO) calculations were carried out, at the MP2/6‐311++G(d,p)//MP2/6‐31G(d) level, to investigate the conformational Gibbs energy of alkyl 1‐cyclohexylethyl ketones, cyclo‐C₆H₁₁CHCH₃? CO? R (R=Me, Et, iPr, and tBu). In each case, one of the equatorial conformations was shown to be the most stable. Conformers with the axial CHCH₃COR group were also shown to be present in an appreciable concentration. Short C? H???C?O and C? H???O?C distances were found in each stable conformation. The result was interpreted on the grounds of C? H???π(C?O) and C? H???O hydrogen bonds, which stabilize the geometry of the molecule. The ratio of the diastereomeric secondary alcohols produced in the nucleophilic addition to cyclo‐C₆H₁₁CHCH₃? CO? R was estimated on the basis of the conformer distribution. The calculated result was consistent with the experimental data previously reported: the gradual increase in the product ratio (major/minor) along the series was followed by a drop at R=tBu. The energy of the diastereomeric transition states in the addition of LiH to cyclo‐C₆H₁₁CHCH₃? CO? R was also calculated for R=Me and tBu. The product ratio did not differ significantly in going from R=Me to tBu in the case of the aliphatic ketones. This is compatible with the above result calculated on the basis of the conformer distribution. Thus, the mechanism of the π‐facial selection can be explained in terms of the simple premise that the geometry of the transition state resembles the ground‐state conformation of the substrates and that the nucleophilic reagent approaches from the less‐hindered side of the carbonyl π face.     

Imino‐Bridged Bisphosphaalkenes (2,4‐Diphospha‐3‐azapentadienes)

Deprotonation of aminophosphaalkenes (RMe₂Si)₂C?PN(H)(R′) (R=Me, iPr; R′=tBu, 1‐adamantyl (1‐Ada), 2,4,6‐tBu₃C₆H₂ (Mes*)) followed by reactions of the corresponding Li salts Li[(RMe₂Si)₂C?P(M)(R′)] with one equivalent of the corresponding P‐chlorophosphaalkenes (RMe₂Si)₂C?PCl provides bisphosphaalkenes (2,4‐diphospha‐3‐azapentadienes) [(RMe₂Si)₂C?P]₂NR′. The thermally unstable tert‐butyliminobisphosphaalkene [(Me₃Si)₂C?P]₂NtBu ( 4 a ) undergoes isomerisation reactions by Me₃Si‐group migration that lead to mixtures of four‐membered heterocyles, but in the presence of an excess amount of (Me₃Si)₂C?PCl, 4 a furnishes an azatriphosphabicyclohexene C₃(SiMe₃)₅P₃NtBu ( 5 ) that gave red single crystals. Compound 5 contains a diphosphirane ring condensed with an azatriphospholene system that exhibits an endocylic P?C double bond and an exocyclic ylidic P⁽⁺⁾? C^(?)(SiMe₃)₂ unit. Using the bulkier iPrMe₂Si substituents at three‐coordinated carbon leads to slightly enhanced thermal stability of 2,4‐diphospha‐3‐azapentadienes [(iPrMe₂Si)₂C?P]₂NR′ (R′=tBu: 4 b ; R′=1‐Ada: 8 ). According to a low‐temperature crystal‐structure determination, 8 adopts a non‐planar structure with two distinctly differently oriented P?C sites, but ³¹P NMR spectra in solution exhibit singlet signals. ³¹P NMR spectra also reveal that bulky Mes* groups (Mes*=2,4,6‐tBu₃C₆H₂) at the central imino function lead to mixtures of symmetric and unsymmetric rotamers, thus implying hindered rotation around the P? N bonds in persistent compounds [(RMe₂Si)₂C?P]₂NMes* ( 11 a , 11 b ). DFT calculations for the parent molecule [(H₃Si)₂C?P]₂NCH₃ suggest that the non‐planar distortion of compound 8 will have steric grounds.     

Synthesis,structural characterization and cytotoxic activity of diorganotin(IV) complexes of N‐(5‐halosalicylidene)‐α‐amino acid

Fourteen new diorganotin(IV) complexes of N‐(5‐halosalicylidene)‐α‐amino acid, R′₂Sn(5‐X‐2‐OC₆H₃CH?NCHRCOO) (where X = Cl, Br; R = H, Me, i‐Pr; R′ = n‐Bu, Ph, Cy), were synthesized by the reactions of diorganotin halides with potassium salt of N‐(5‐halosalicylidene)‐α‐amino acid and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ¹¹⁹Sn) spectra. The crystal structures of Bu₂Sn(5‐Cl‐2‐OC₆H₃CH?NCH(i‐Pr)COO) and Ph₂Sn(5‐Br‐2‐OC₆H₃CH?NCH(i‐Pr)COO) were determined by X‐ray single‐crystal diffraction and showed that the tin atoms are in a distorted trigonal bipyramidal geometry and form five‐ and six‐membered chelate rings with the tridentate ligand. Bioassay results of a few compounds indicated that the compounds have strong cytotoxic activity against three human tumour cell lines, i.e. HeLa, CoLo205 and MCF‐7, and the activity decreased in the order Cy>n‐Bu>Ph for the R′ group bound to tin. Copyright © 2005 John Wiley & Sons, Ltd.     

Alkylamines‐intercalated α‐zirconium phosphate as latent thermal anionic initiators

The reaction of glycidyl phenyl ether (GPE) with 1‐aminoalkanes‐intercalated α‐zirconium phosphate (α‐ZrP·1‐aminoalkane): 1‐aminoalkanes 1‐aminopropane (α‐ZrP·Pr), 1‐aminobutane (α‐ZrP·Bu), 1‐aminooctane (α‐ZrP·Oct), and 1‐aminohexadecane (α‐ZrP·Hed) was carried out at varying temperatures for 1 h periods. Reaction progress was not observed until the reactants were heated to 80 °C or above. On increasing the temperature, the conversion factors increased such that, at 140 °C, conversions of 62% (α‐ZrP·Pr), 60% (α‐ZrP·Bu), 67% (α‐ZrP·Oct), and 64% (α‐ZrP·Hed) were obtained. The thermal stabilities as latent initiators were tested: GPEs reacted with α‐ZrP·Pr, α‐ZrP·Bu, and α‐ZrP·Oct at 40 °C for 360 h achieved conversions of 83, 55, and 59%, respectively. In contrast, the reaction in the presence of α‐ZrP·Hed did not proceed at 40 °C. The order of the thermal stability of GPE in the presence of α‐ZrP·1‐aminoalkane intercalation compounds was: α‐ZrP·Hed > α‐ZrP·Bu ≈ α‐ZrP·Oct > α‐ZrP·Pr. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1854–1861