Asymmetric di-jet production in polarized hadronic collisions

Using the collinear QCD factorization approach, we study the single-transverse-spin dependent cross section Δσ(S) for the hadronic production of two jets of momenta P₁=P+q/2 and P₂=−P+q/2. We consider the kinematic region where the transverse components of the momentum vectors satisfy PqΛ_QCD. For the case of initial-state gluon radiation, we show that at the leading power in q/P and at the lowest non-trivial perturbative order, the dependence of Δσ(S) on q decouples from that on P, so that the cross section can be factorized into a hard part that is a function only of the single scale P, and into perturbatively generated transverse-momentum dependent (TMD) parton distributions with transverse momenta .     

1.3 μm range effectively cylindrical In0.53Ga0.47As/In0.52Al0.48As quantum wires grown on (2 2 1)A InP substrates by molecular beam epitaxy

Vertically coupled quantum wires (QWRs) have been made by alternately stacking nominally 3.6 nm thick In_0.53Ga_0.47As self-organized QWR layers and 1 nm thick In_0.52Al_0.48As barrier layers on (2 2 1)A-oriented InP substrates by molecular beam epitaxy. The surface of In_0.53Ga_0.47As QWR layers was corrugated at an amplitude of 1.1 nm and period of 27 nm, and lateral confinement potential is induced by their thickness modulation. The wavelength of photoluminescence (PL) from the stacked QWRs at 15 K becomes longer from 1220 to 1327 nm with increasing total number of stacked QWR layers, N_SL, from 1 to 9, while PL full-width at half-maximum is reduced from 22 to 8.6 meV. The PL intensity with the polarization parallel to the wire direction, I, is 1.30 times larger than that with the normal polarization, I, when N_SL=1. The PL intensity ratio, I/I, reaches as large as 4 when N_SL=9, indicating successful control of relative strength between vertical confinement and lateral confinement of carriers. The value of I/I obtained for the stacked QWRs with N_SL=9 is the same value as cylindrical QWRs have. The results indicate that effectively cylindrical QWRs with the best uniformity and 1.3 μm range emission were realized by stacking of self-organized QWR layers.     

Transport properties of single crystal

Transport properties of BaNi₂P₂ single crystals prepared by high-pressure synthesis method have been investigated. The temperature dependence of the resistivity is that of a typical metal with the anisotropy ratio ρ/ρ of 6.3 and suggests that electron–phonon interaction dominates the scattering mechanism. We have also found that the Hall effect and the magnetoresistance can be explained by a two-carrier model which is consistent with a multiple-band structure with both hole and electron characters.     

Studies of the spin-Hamiltonian parameters, d–d transitions and defect structures for two tetragonal Cu centers in Ba2ZnF6:Cu crystal

Two theoretical methods, the perturbation theory method (PTM) and the complete diagonalization (of energy matrix) method (CDM), are applied to calculate the spin-Hamiltonian parameters (g-factors g, g and hyperfine structure constants A, A, obtained from electron paramagnetic resonance (EPR) spectra) and d–d transitions (obtained from optical spectra) for two tetragonal Cu²⁺ centers in Ba₂ZnF₆:Cu²⁺ crystals. The Cu²⁺(I) ion replaces the Zn²⁺ ion at tetragonally compressed octahedral coordination and has the ground state ²A₁(|d_z²), whereas the Cu²⁺(II) ion is at an interstitial site with a square-planar F⁻coordination and has the ground state ²B₂(|d_x²-y²). The calculated spin-Hamiltonian parameters and d–d transitions from the PTM and CDM coincide and are in reasonable agreement with the experimental values. This suggests that both methods are effective for the theoretical studies of EPR and optical spectral data for 3d⁹ ions in tetragonal symmetry with different ground states. The defect structures of the two Cu²⁺ centers in Ba₂ZnF₆:Cu²⁺ are also estimated.     

A rapid measurement of : The DECPMG sequence

The Driven-Equilibrium Carr–Purcell Meiboom–Gill (DECPMG) pulse sequence is a rapid method for obtaining the average ratio of longitudinal to transverse relaxation times T₁/T₂ as a function of T₂. Since this is a one-dimensional experiment, the T₁/T_2T2 ratio can be acquired, potentially, in just two scans; the second scan being a reference CPMG measurement. Conventionally, T₁/T₂ is determined from a two-dimensional T₁-T₂ relaxation correlation experiment. The method described here offers a significant reduction in experimental time without a reduction in signal-to-noise. The T₁/T₂ ratio is useful for comparing the behaviour of liquids in porous media. Here we demonstrate the application of the DECPMG sequence to the study of oil-bearing rocks by differentiating oil or water saturated rock cores, and by observing the relative strengths of surface interaction for water in two types of rock by measuring T₁/T₂ as a function of magnetic field strength.     

Surface morphology and composition of c-, a- and m-sapphire surfaces in O2 and H2 environments

This paper reports that monitoring the composition of the c(0 0 0 1), a(11–20) and m(10–10) sapphire surfaces is essential for a proper interpretation of the surface morphologies obtained after annealing at 1253 and 1473 K in ArH₂ or ArO₂ atmospheres. Our experimental investigations, which have used Auger electron spectroscopy (AES) and atomic force microscopy (AFM) on the surfaces of 99.99% pure sapphire wafers, have led to the following original conclusions: (i) Calcium segregates at the c-surface of sapphire both under ArO₂ and ArH₂. (ii) Potassium adsorption enhances the kinetics of step-bunching on the c-surface under ArO₂. (iii) The step edges on the a-surface may develop a comb-like morphology made of parallel strips along the [10–10] direction. (iv) At 1253 K, clean m-surfaces may be stable. (v) Under ArH₂, alumina surface diffusion is much slower than under ArO₂ for all surface orientations, the surface concentration of impurities is low, and the Al–O ratio of the AES signals at the surface is significantly larger.     

Dielectric/piezoelectric properties and temperature dependence of domain structure evolution in lead free single crystal

(K_0.5Na_0.5)NbO₃ (KNN) single crystals were grown using a high temperature flux method. The dielectric permittivity was measured as a function of temperature for [001]-oriented KNN single crystals. The ferroelectric phase transition temperatures, including the rhombohedral–orthorhombic T_R−O, orthorhombic–tetragonal T_O−T and tetragonal–cubic T_C were found to be located at −149  C, 205 C and 393 C, respectively. The domain structure evolution with an increasing temperature in [001]-oriented KNN single crystal was observed using polarized light microscopy (PLM), where three distinguished changes of the domain structures were found to occur at −150  C, 213 C and 400 C, corresponding to the three phase transition temperatures.     

Far-field properties and beam quality of vectorial Hermite–Laguerre–Gaussian beams beyond the paraxial approximation

The far-field properties and beam quality of vectorial nonparaxial Hermite–Laguerre–Gaussian (HLG) beams are studied in detail, where, instead of the second-order-moments-based M² factor, the extended power in the bucket (PIB) and βparameter are used to characterize the beam quality in the far field and the intensity in the formulae is replaced by the z component of the time-averaged Poynting vector S_z. It is found that the S_z PIB and βparameter of vectorial nonparaxial HLG beams depend on the mode indices n, m, αparameter and waist-width-to-wavelength ratio w₀/λ and the PIB and βparameter are additionally dependent on the bucket's size taken.     

Contours of constant Δ and Ψ in the 2–4 plane for the ellipsometric functions

Contour graphs of ₂ vs ₄ for different film thicknesses and a range of angles of incidence have been plotted for the ellipsometric functions Δ and Ψ in both the reflection and transmission modes. In the case of reflection ellipsometry, when the plots for Δ_R and Ψ_R are superimposed, the two sets of contours cross nearly at right angles over a large part of the field, this being indicative of the high accuracy obtainable in using this technique to determine ₄ and ₂ and hence the optical constants, n and k, for the film material. The reflection ellipsometric technique is accurate over angles of incidence between 30° and 75° and for a range of film thicknesses between λ/30 and 5λ. Transmission ellipsometry is less useful, due to anomalies in both X_s and X_p where sudden phase changes of ±π occur in regions of interest. There is also the possibility of multiple solutions, although the use of a multiangle technique would enable the “correct” values to be more easily determined.     

Velocity of electroweak bubble walls

We study the velocity of bubble walls in the electroweak phase transition. For several extensions of the Standard Model, we estimate the friction and calculate the wall velocity, taking into account the hydrodynamics. We find that deflagrations are generally more likely than detonations. Nevertheless, for models with extra bosons, which give a strongly first-order phase transition, the deflagration velocity is in general quite high, 0.1v_w0.6. Therefore, such phase transitions may produce an important signal of gravitational waves. On the other hand, models with extra fermions which are strongly coupled to the Higgs boson may provide a strongly first-order phase transition and small velocities, 10⁻²v_w10⁻¹, as required by electroweak baryogenesis.     

The extraction of total cross section from

We report on the first measurement of the differential cross section of -meson photoproduction for the d(γ,pK⁺K⁻)n exclusive reaction channel. The experiment was performed using a tagged-photon beam and the CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Lab. A combined analysis using data from the d(γ,pK⁺K⁻)n channel and those from a previous publication on coherent production on the deuteron has been carried out to extract the −N total cross section, σ_N. The extracted −N total cross section favors a value above 20 mb. This value is larger than the value extracted using vector-meson dominance models for photoproduction on the proton.     

Electric and magnetic losses and gains in determining the sign of refractive index

Within the framework of classic electromagnetic theories, we have studied the sign of refractive index of optical medias with the emphases on the roles of the electric and magnetic losses and gains. Starting from the Maxwell equations for an isotropic and homogeneous media, we have derived the general form of the complex refractive index and its relation with the complex electric permittivity and magnetic permeability, i.e. , in which the intrinsic electric and magnetic losses and gains are included as the imaginary parts of the complex permittivity and permeability, respectively, as  = _r + i_i and μ = μ_r + iμ_i. The electric and magnetic losses are present in all passive materials, which correspond, respectively, to the positive imaginary permittivity and permeability _i > 0 and μ_i > 0. The electric and magnetic gains are present in materials where external pumping sources enable the light to be amplified instead of attenuated, which correspond, respectively, to the negative imaginary permittivity and permeability _i < 0 and μ_i < 0. We have analyzed and determined uniquely the sign of the refractive index, for all possible combinations of the four parameters _r, μ_r, _i, and μ_i, in light of the relativistic causality. A causal solution requires that the wave impedance be positive Re{Z} > 0. We illustrate the results for all cases in tables of the sign of refractive index. One of the most important messages from the sign tables is that, apart from the well-known case where simultaneously  < 0 and μ < 0, there are other possibilities for the refractive index to be negative n < 0, for example, for _r < 0, μ_r > 0, _i > 0, and μ_i > 0, the refractive index is negative n < 0 provided μ_i/_i > μ_r/_r.     

Antiferromagnetic Mn50Fe50 wire with large magnetostriction

This work presents a study on the relation between the fiber texture and the magnetostrictive performance in an antiferromagnetic Mn₅₀Fe₅₀ alloy wire, which was prepared through the combining process of hot rolling and cold drawing. The face-centered cubic (fcc) crystal structure can be retained during the plastic deformation process. Mixed fiber textures consisting of both 1 1 0 and 1 0 0 components were formed along the drawing direction (DD) in the wire. A large magnetostriction of 750 ppm was obtained along DD under 1.2 T, which can be ascribed to the single γ phase and the formation of preferred crystal orientation.     

Further observations on the variation with dielectric constant and thickness of the reflectance and phase change on reflection of films

Studies of the behaviour with ₁, ₂ and film thickness of the optical functions reflectance (R) and phase change on reflection (Φ_r) have previously been made for both very thin and very thick films. Abelès [J. Opt. Soc. Amer. 47 (1957) 473] has formulated equations for very thin films where functions of ₁ and ₂ are the coefficients of a power series of the optical thickness, x(2πd/λ) up to x², whilst in the case of very thick films (solids) the relationships between ₁ and ₂ can be represented in polar coordinates L and α by ₁=L cos α, ₂=L sin α where L_R=2y²₀W²(1+cos α−1/W²) [W=(1+R)/(1−R)] and L_Φr=2(y₀/ tan Φ_r)²(1−cos α+tan ² Φ_r) [Ward, Opt. and Laser Tech. 27 (1995) 125]. The present study is concerned with films of intermediate optical thicknesses (1.0<2πd/λ<solid) and has revealed that the polar-type relationships previously noted for solid materials are augmented by secondary structures of maxima and minima whose position and amplitude can be predicted by adapting the exact equations for R and Φ_r.     

Experimental and numerical investigation of the hetero-/homogeneous combustion of lean propane/air mixtures over platinum

The pure heterogeneous and the coupled hetero-/homogeneous combustion of fuel-lean propane/air mixtures over platinum have been investigated at pressures 1 bar  p  7 bar, fuel-to-air equivalence ratios 0.23  φ  0.43, and catalytic wall temperatures 723 K  T_w  1286 K. Experiments were performed in an optically accessible catalytic channel-flow reactor and involved 1-D Raman measurements of major gas-phase species concentrations across the reactor boundary layer for the assessment of catalytic fuel conversion and planar laser induced fluorescence (LIF) of the OH radical for the determination of homogeneous ignition. Numerical predictions were carried out with a 2-D elliptic CFD code that included a one-step catalytic reaction for the total oxidation of propane on Pt, an elementary C₃ gas-phase chemical reaction mechanism, and detailed transport. A global catalytic reaction step valid over the entire pressure–temperature-equivalence ratio parameter range has been established, which revealed a p^0.75 dependence of the catalytic reactivity on pressure. The aforementioned global catalytic step was further coupled to a detailed gas-phase reaction mechanism in order to simulate homogeneous ignition characteristics in the channel-flow reactor. The predictions reproduced within 10% the measured homogeneous ignition distances at pressures p  5 bar, while at p = 7 bar the simulations overpredicted the measurements by 19%. The overall model performance suggests that the employed hetero-/homogeneous chemical reaction schemes are suitable for the design of propane-fueled catalytic microreactors.     

Interband absorption and luminescence in small quantum dots under strong magnetic fields

Interband absorption and luminescence of quasi-two-dimensional, circularly symmetric, N_e-electron quantum dots are studied at high magnetic fields, 8B60 T, and low temperatures, T2 K. In the N_e=0 and 1 dots, the initial and final states of such processes are fixed, and thus the dependence on B of peak intensities is monotonic. For larger systems, ground state rearrangements with varying magnetic field lead to substantial modifications of the absorption and luminescence spectra. Collective effects are seen in the N_e=2 and 3 dots at “filling fractions” and .     

Electron drag in intermediate magnetic fields with low electron density

Electron drag between two two-dimensional electron systems has been measured in intermediate magnetic fields (/τ<ω_ck_BT) with a relatively low electron density. We explore, in this sample, the unusual increase of drag in intermediate magnetic fields which was well characterized by a nearly temperature independent B³ dependence. The anomalous behavior of electron drag observed in higher density samples is found to persist for low sample density.     

Anomalous dimension with wrapping at four loops in SYM

In this paper we give all the details of the calculation that we presented in our previous paper [F. Fiamberti, A. Santambrogio, C. Sieg, D. Zanon, Wrapping at four loops in SYM, arXiv: 0712.3522], concerning the four-loop anomalous dimension of the Konishi descendant tr(ZZ−ZZ) in the SU(2) sector of the planar SYM theory. We explicitly consider all the wrapping diagrams that we compute using an superspace approach and Gegenbauer polynomial x-space techniques.     

Quantum transport in a mesoscopic ring: Evidence of an OR gate

We explore the OR gate response in a mesoscopic ring threaded by a magnetic flux . The ring is symmetrically attached to two semi-infinite one-dimensional metallic electrodes, and two gate voltages, V_a and V_b, are applied in one arm of the ring; these are treated as the two inputs of the OR gate. All the calculations are based on the tight-binding model and the Green’s function method, which numerically compute the conductance–energy and current–voltage characteristics as functions of the gate voltages, ring-to-electrode coupling strengths and magnetic flux. Our theoretical study shows that, for =₀/2 (₀=ch/e, the elementary flux-quantum), a high output current (1) (in the logical sense) appears if one or both the inputs to the gate are high (1), while if neither input is high (1), a low output current (0) appears. It clearly demonstrates the OR gate behavior, and this aspect may be utilized in designing an electronic logic gate.     

Multiplication for solutions of the equation

Linear first-order systems of partial differential equations (PDEs) of the form f=Mg, where M is a constant matrix, are studied on vector spaces over the fields of real and complex numbers. The Cauchy–Riemann equations belong to this class. We introduce on the solution space a bilinear *-multiplication, playing the role of a nonlinear superposition principle, that allows for algebraic construction of new solutions from known solutions. The gradient equation f=Mg is a simple special case of a large class of systems of PDEs, admitting a *-multiplication of solutions. We prove that any gradient equation has the exceptional property that the general analytic solution can be expressed as *-power series of certain simple solutions.