Brønsted Acid Catalyzed Morita–Baylis–Hillman Reaction: A New Mechanistic View for Thioureas Revealed by ESI‐MS(/MS) Monitoring and DFT Calculations

A Morita–Baylis–Hillman (MBH) reaction catalyzed by thiourea was monitored by ESI‐MS(/MS) and key intermediates were intercepted and characterized. These intermediates suggest that thiourea acts as an organocatalyst in all steps of the MBH reaction cycle, including the rate‐limiting proton‐transfer step. DFT calculations, performed for a model MBH reaction between formaldehyde and acrolein with trimethylamine as base and in the presence or the absence of thiourea, suggest that thiourea accelerates MBH reactions by decreasing the transition‐state (TS) energies through bidentate hydrogen bonding throughout the whole catalytic cycle. In the rate‐limiting proton‐transfer step, the thiourea acts not as a proton shuttle, but as a Brønsted acid stabilizing the basic oxygen center that is formed in the TS.     

Asymmetric Morita–Baylis–Hillman Reaction: Catalyst Development and Mechanistic Insights Based on Mass Spectrometric Back‐Reaction Screening

An efficient protocol for the evaluation of catalysts for the asymmetric Morita–Baylis–Hillman (MBH) reaction was developed. By mass spectrometric back‐reaction screening of quasi‐enantiomeric MBH products, an efficient bifunctional phosphine catalyst was identified that outperforms literature‐known catalysts in the MBH reaction of methyl acrylate with aldehydes. The close match between the selectivities measured for the forward and back reaction and kinetic measurements provided strong evidence that the aldol step and not the subsequent proton transfer is rate‐ and enantioselectivity‐determining.     

Enhancing the Reaction Rates of Morita–Baylis–Hillman Reaction in Heterocyclic Aldehydes by Substitutions

The molecular origin of the experimentally observed pronounced difference in the rates of Morita–Baylis–Hillman (MBH) reaction in heterocyclic aldehydes, depending on the position of the formyl group, is investigated herein by using DFT‐based mechanistic studies and free energy computations. These calculations are based on the 1,4‐diazobicyclo[2.2.2]octane (DABCO)‐catalyzed MBH reaction of methyl acrylate with substituted 4‐ and 5‐isoxazolecarbaldehyde, which are slow‐ and fast‐reacting substrates, respectively. As a result of this study, we propose that by tailoring ring substitutions the reactivity of the formyl group for MBH reactions may be enhanced in slow‐reacting heterocyclic aldehydes. This proposition is demonstrated by enhancing the rate of the MBH reaction in 4‐isoxazolecarbaldehyde more than 10⁴‐fold by installing an ester substitution at the C‐3 position. Similarly, the reactivity of the formyl group towards the MBH reaction in substituted 3‐pyrazolecarbaldehyde and pyridinecarbaldehyde is shown to be increased several‐fold by a halo substitution. We also confirm that the reasons for different reactivities of heterocyclic aldehydes and the proposed scheme for improving the reaction rates remains valid for all the three mechanisms proposed for the MBH reaction, namely, Hill–Isaacs, McQuade, and Aggarwal.     

Morita–Baylis–Hillman Reaction of β,β‐Disubstituted Enones: An Enantioselective Organocatalytic Approach for the Synthesis of Cyclopenta[b]annulated Arenes and Heteroarenes

The first enantioselective organocatalytic intramolecular Morita–Baylis–Hillman (MBH) reaction of sterically highly demanding β,β‐disubstituted enones is presented. The MBH reaction of β,β‐disubstituted‐α,β‐unsaturated electron‐withdrawing systems was previously considered to be unfeasible. Towards this end, designer substrates, which under simple and practical reaction conditions generate a variety of cyclopenta[b]annulated arenes and heteroarenes in excellent enantiopurities and near‐quantitative yields in remarkably short reaction times, are described. The reason for the unusually facile nature of this reaction is attributed to the synergy guided and entropically favored intramolecular reaction. Further, this strategy provides easy access to a substantial number of bioactive natural products and pharmaceutically significant compounds.     

The Aza‐Morita–Baylis–Hillman Reaction: A Mechanistic and Kinetic Study

The aza‐Morita‐Baylis–Hillman (aza‐MBH) reaction has been studied in a variety of solvents, a selection of imine substrates and with various combinations of PPh₃ and para‐nitrophenol as the catalyst system. The measured kinetic data indicates that the effects of solvent and protic co‐catalyst are strongly interdependent. These results are most easily reconciled with a mechanistic model involving the reversible protonation of zwitterionic intermediates in the catalytic cycle, which is also supported by ³¹P NMR spectroscopy and quantum chemical studies.     

Organocatalytic One‐Pot Synthesis of Highly Substituted Pyridazines from Morita–Baylis–Hillman Carbonates and Diazo Compounds

A biologically inspired organocatalytic one‐pot synthesis of highly functionalized pyridazines, which are ubiquitous structural units in a number of biologically active compounds, has been developed by starting from readily available diazo compounds and Morita–Baylis–Hillman (MBH) carbonates. Under mild reaction conditions, this synthetic route tolerated significant substrate variation to deliver a broad range of substituted products, including CF₃‐substituted pyridazines derivatives. Moreover, the introduction of trifluoromethyl groups into the ring of pyridazine could be completed conveniently from 2,2,2‐trifluorodiazoethane.     

Organocatalytic Asymmetric C(sp2)−H Allylic Alkylation: Enantioselective Synthesis of Tetrasubstituted Allenoates

Herein we describe the first organocatalytic asymmetric C(sp²)−H allylation of racemic trisubstituted allenoates with Morita–Baylis–Hillman (MBH) carbonates to access axially chiral tetrasubstituted allenoates. Various trisubstituted allenoates and MBH carbonates were well tolerated under mild reaction conditions, providing novel chiral tetrasubstituted allenoates with adjacent axial chirality and tertiary carbon stereocenters in high yields with good to excellent diastereoselectivities and enantioselectivities.     

Radiation-induced reaction of ethylene–cyclohexane–carbon tetrachloride system

The γ-ray-induced reaction of ethylene with carbon tetrachloride in cyclohexane was carried under a pressure of 30 kg/cm² and at a temperature of 20°C. The liquid and the solid products were obtained. Their structures were discussed on the basis of infrared absorption spectra and differential thermal analysis curves. The liquid product is considered to be ethylene–carbon tetrachloride telomer. The solid product consists of three components, differing slightly in molecular structure and molecular weight. To clarify the reaction process, some runs with the ethylene–cyclohexane–(ethylene–carbon tetrachloride telomer) system were also carried out. In this system, only solid product was obtained. Thus, it is concluded that the reaction proceeds stepwise, the first step being the telomerization reaction and the second the graft polymerization of ethylene onto the telomer produced in the first step.     

Synthesis of Nanoporous Carbon–Cobalt‐Oxide Hybrid Electrocatalysts by Thermal Conversion of Metal–Organic Frameworks

Nanoporous carbon–cobalt‐oxide hybrid materials are prepared by a simple, two‐step, thermal conversion of a cobalt‐based metal–organic framework (zeolitic imidazolate framework‐9, ZIF‐9). ZIF‐9 is carbonized in an inert atmosphere to form nanoporous carbon–metallic‐cobalt materials, followed by the subsequent thermal oxidation in air, yielding nanoporous carbon–cobalt‐oxide hybrids. The resulting hybrid materials are evaluated as electrocatalysts for the oxygen‐reduction reaction (ORR) and the oxygen‐evolution reaction (OER) in a KOH electrolyte solution. The hybrid materials exhibit similar catalytic activity in the ORR to the benchmark, commercial, Pt/carbon black catalyst, and show better catalytic activity for the OER than the Pt‐based catalyst.     

Enantioselective synthesis of spirocyclic cyclopentenes: asymmetric [3+2] annulation of 2-arylideneindane-1,3-diones with MBH carbonates derivatives catalyzed by multifunctional thiourea–phosphines

The [3+2] annulation reactions of 2-arylideneindane-1,3-diones with Morita–Baylis–Hillman (MBH) carbonates proceeded smoothly in the presence of multifunctional thiourea–phosphines to produce the corresponding quaternary carbon centered spirocyclic cyclopentenes in moderate yields, with high diastereoselectivities and enantioselectivities under mild conditions. The plausible reaction has been also discussed on the basis of previous literature.     

Synthesis of 3,4,5‐Trisubstituted Isoxazoles from Morita–Baylis–Hillman Acetates by an NaNO2/I2‐Mediated Domino Reaction

An efficient NaNO₂/I₂‐mediated one‐pot transformation of Morita–Baylis–Hillman (MBH) acetates into alkyl 3‐nitro‐5‐(aryl/alkyl)isoxazole‐4‐carboxylates is described. In a cascade event, initial Michael addition of NaNO₂ to the MBH acetate furnishes the allylnitro intermediate which undergoes I₂‐catalyzed oxidative α‐C H nitration of the nitromethyl subunit followed by [3+2] cycloaddition to afford the title compounds. Structural elaborations of these highly substituted isoxazoles by S_NAr reactions and hydrogenolysis allows access to useful products.     

An Iodine‐Catalyzed Hofmann–Löffler Reaction

Iodine reagents have been identified as economically and ecologically benign alternatives to transition metals, although their application as molecular catalysts in challenging C? H oxidation reactions has remained elusive. An attractive iodine oxidation catalysis is now shown to promote the convenient conversion of carbon–hydrogen bonds into carbon–nitrogen bonds with unprecedented complete selectivity. The reaction proceeds by two interlocked catalytic cycles comprising a radical chain reaction, which is initiated by visible light as energy source. This unorthodox synthetic strategy for the direct oxidative amination of alkyl groups has no biosynthetic precedence and provides an efficient and straightforward access to a general class of saturated nitrogenated heterocycles.     

Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

An Efficient Low‐Temperature Stille–Migita Cross‐Coupling Reaction for Heteroaromatic Compounds by Pd–PEPPSI–IPent

The reactivity of Pd–PEPPSI (Pyridine, Enhanced, Precatalyst, Preparation, Stabilization, and Initiation) precatalysts in the Stille–Migita cross‐coupling reaction between heteroaryl stannanes and aryl or heteroaryl halides was evaluated. In general, Pd–PEPPSI–IPent (IPent=diisopentylphenylimidazolium derivative) demonstrated high efficiency over a variety of challenging aryl or heteroaryl halides with thiophene‐, furan‐, pyrrole‐, and thiazole‐based organostannanes when compared with Pd–PEPPSI–IPr (IPr=diisopropylphenylimidazolium derivative). The transformations proceeded at appreciably lower temperatures (30–80 °C) than triarylphosphine‐based Pd catalysts, improving the scope of this useful carbon–carbon bond‐forming process.     

Coordination‐Directed Growth of Transition‐Metal–Crystalline‐Carbon Composites with Controllable Metal Composition

Transition‐metal–carbon (CTM) composites show ample activity in many catalytic reactions. However, control of composition, distribution, and properties is challenging. Now, a straightforward path for the synthesis of transition‐metal nanoparticles engulfed in crystalline carbon is presented with excellent control over the metal composition, amount, ratio, and catalytic properties. This approach uses molten monomers that coordinate metals ions at high temperature. At high temperatures, strong coordination bonds direct the growth of carbon material with homogeneous metals distribution and with negligible losses, owing to the liquid‐like reaction compared to the traditional solid‐state reaction. The strength of the approach is demonstrated by the synthesis of mono, binary, and trinary transition‐metal–crystalline‐carbon composites with tunable and precise elemental composition as well as good electrochemical properties as oxygen evolution reaction electrocatalysts.     

Destruction and Construction: Application of Dearomatization Strategy in Aromatic Carbon–Nitrogen Bond Functionalization

The formation of carbon–carbon bonds through the functionalization of aromatic carbon–nitrogen bonds is a highly attractive synthetic strategy in the synthesis of aromatic molecules. In this paper, we report a novel aromatic carbon–nitrogen bond functionalization reaction by using a simple dearomatization strategy. Through this process para‐substituted anilines serve as a potential aryl source in the construction of a range of functionalized aromatic molecules, such as quaternary carbon centers, α‐keto esters, and aldehydes.     

Synergistic Effect between Metal–Nitrogen–Carbon Sheets and NiO Nanoparticles for Enhanced Electrochemical Water‐Oxidation Performance

Identifying effective means to improve the electrochemical performance of oxygen‐evolution catalysts represents a significant challenge in several emerging renewable energy technologies. Herein, we consider metal–nitrogen–carbon sheets which are commonly used for catalyzing the oxygen‐reduction reaction (ORR), as the support to load NiO nanoparticles for the oxygen‐evolution reaction (OER). FeNC sheets, as the advanced supports, synergistically promote the NiO nanocatalysts to exhibit superior performance in alkaline media, which is confirmed by experimental observations and density functional theory (DFT) calculations. Our findings show the advantages in considering the support effect for designing highly active, durable, and cost‐effective OER electrocatalysts.     

Transition-metal-free nucleophilic allylic substitutions of Morita–Baylis–Hillman bromides with aliphatic and aromatic amines

A simple protocol for the preparation of functionalized allylic amines under mild, transition-metal-free conditions from the reaction of Morita–Baylis–Hillman (MBH) bromides with amines is described herein. The treatment of the MBH bromides with various amines in the presence of NaI and Et₃N in aqueous acetone solution and at room temperature affords the corresponding functionalized allyl amines in moderate to good yields (45–87%). The reaction is rapid and carried out at room temperature.     

Palladium‐Catalyzed Oxidative Carbocyclization–Carbonylation of Allenynes and Enallenes

A highly efficient oxidative carbocyclization–carbonylation reaction cascade of allenynes and enallenes has been developed using a Pd^II salt in low catalytic amounts under ambient temperature and pressure (1 atm of carbon monoxide). The use of DMSO as an additive was found to be important for an efficient reaction. A wide range of alcohols as trapping reagents were used to give the corresponding esters in good yields.     

Cooperative Acid–Base Effects with Functionalized Mesoporous Silica Nanoparticles: Applications in Carbon–Carbon Bond‐Formation Reactions

Acid–base bifunctional mesoporous silica nanoparticles (MSN) were prepared by a one‐step synthesis by co‐condensation of tetraethoxysilane (TEOS) and silanes possessing amino and/or sulfonic acid groups. Both the functionality and morphology of the particles can be controlled. The grafted functional groups were characterized by using solid‐state ²⁹Si and ¹³C cross‐polarization/magic angle spinning (CP/MAS) NMR spectroscopy, thermal analysis, and elemental analysis, whereas the structural and the morphological features of the materials were evaluated by using XRD and N₂ adsorption–desorption analyses, and SEM imaging. The catalytic activities of the mono‐ and bifunctional mesoporous hybrid materials were evaluated in carbon–carbon coupling reactions like the nitroaldol reaction and the one‐pot deacetalization–nitroaldol and deacetalization–aldol reactions. Among all the catalysts evaluated, the bifunctional sample containing amine and sulfonic acid groups (MSN–NNH₂–SO₃H) showed excellent catalytic activity, whereas the homogeneous catalysts were unable to initiate the reaction due to their mutual neutralization in solution. Therefore a cooperative acid–base activation is envisaged for the carbon–carbon coupling reactions.