Studies on the effects of the alkyl group on the surface segregation of poly(n-alkyl methacrylate) end-capped 2-perfluorooctylethyl methacrylate films

The effects of the alkyl group on the surface segregation of poly(n-alkyl methacrylate) end-capped with various numbers of units of 2-perfluorooctylethyl methacrylate (FMA) (PnAMA-ec-PFMA) were investigated by differential scanning calorimetry, angle-resolved XPS analysis, contact angle measurements, and X-ray diffraction (XRD). The results show that with similar numbers of FMA units at the polymer chain end the extent of fluorine segregation (Q) increased with increasing the number of carbon atoms in the side n-alkyl chains of poly(n-alkyl methacrylate). The surface fluorine content within 5 nm deep of the film of poly(n-octadecyl methacrylate) end-capped with one FMA unit (PODMA(160)-ec-PFMA(1.0)) was 208-fold higher than that of the bulk level. These observed differences in Q values were found due to the aggregate structure of the end-capped polymers in the solution, the flexibility, and the crystallinity of the n-alkyl side chains. When the nonfluorinated block was completely amorphous, the molecular aggregate structure of the end-capped polymers in the solution played an important role in the surface segregation of the fluorinated moieties on the resulting film. However, when the nonfluorinated block was crystalline, crystallinity would enhance greatly the segregation of the fluorinated moieties.     

Side‐chain crystallization behavior of graft copolymers consisting of an amorphous main chain and crystalline side chains. II. Poly(n‐hexyl methacrylate)‐graft‐poly(ethylene glycol)

The phase behavior and crystallization of graft copolymers consisting of poly(n‐hexyl methacrylate) (PHMA) as an amorphous main chain and poly(ethylene glycol) (PEG) as crystallizable side chains (HMAx with 15 ≤ x ≤ 73, where x represents the weight percentage of PEG) were investigated. Small‐angle X‐ray scattering profiles measured above the melting temperature of PEG suggested that a microdomain structure with segregated PHMA and PEG domains was formed in HMA40 and HMA46. This phase behavior was qualitatively described by a calculated phase diagram based on the mean‐field theory. Because of the segregation of PEG into microdomains, the crystallization temperature of the PEG side chains in HMAx was higher than that in poly(methyl acrylate)‐graft‐poly(ethylene glycol) having a similar value of x, which was considered to be in a disordered state above the melting temperature. In HMAx with x ≤ 40, PEG crystallization was strongly restricted, probably because the PEG microdomains were isolated in the PHMA matrix. As a result, the growth of PEG spherulite was not observed because the PEG crystallization occurred after vitrification of the PHMA segregated domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 129–137, 2007     

Small‐angle neutron scattering analysis of bottlebrush backbone and side chain flexibility

Bottlebrush polymers have densely tethered side chains grafted to a linear polymer backbone, resulting in stretching of both the side chains and backbone. Prior studies have reported that the side chains are only weakly stretched while the backbone is highly elongated. Here, scaling laws for the bottlebrush backbone and side chains are determined through small‐angle neutron scattering analysis of a systematic series of poly(lactic acid) bottlebrush polymers synthesized via a “grafting‐through” ring‐opening polymerization. Scattering profiles are modeled with the empirical Guinier–Porod, rigid cylinder, and flexible cylinder models. Side chains are found to be only weakly stretched, with an end‐to‐end distance proportional to N^0.55, while the overall bottlebrush increases in size proportional to N^0.77. These results demonstrate that the bottlebrush backbone is not fully extended and that both side chains and backbone have significant conformational flexibility in solution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 104–111     

Grafting of poly(ethylene oxide) on poly(methyl methacrylate) by transesterification

The grafting of the potassium alkoxide derivative of poly(ethylene oxide) on poly(methyl methacrylate) in homogeneous solution in toluene was studied. The alkoxide was prepared by reaction with potassium metal with methanolic potassium methoxide, or with potassium naphthalene. The last was the most suitable for the systematic investigation of the grafting process. Soluble graft polymers were formed, and essentially the initial poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) participated in the production of graft polymer. The composition of the graft polymers and the frequency of grafting of the side chains were determined by NMR. The solubility of the graft polymers in methanol and water increased with increasing PEO contents, while the melting ranges decreased. Fractionation of the crude graft polymers showed that the grafting reaction was random, and graft polymers containing one PEO side chain per about 10–170 MMA units were obtained.     

Interrelation between side chain crystallization and dynamic glass transitions in higher poly(n-alkyl methacrylates)

Calorimetric and dielectric results for crystallizable poly(n-alkyl methacrylates) (PnAMA) with C=12, 16 and 18 alkyl carbons per side chain are presented. Degree of crystallization D_cal and melting peak temperature T_M are estimated from conventional DSC measurements. For poly(n-hexadecyl methacrylate) (C=16) the influence of isothermal crystallization is studied by DSC as well as TMDSC. Changes in dielectric relaxation strength Δε and α peak shape during crystallization are investigated. Effects of side chain crystallization on the complex dynamics of PnAMA are discussed. The results are related to the relaxation behavior of lower nanophase-separated PnAMA with two co-existing glass transitions, the conventional glass transition (a or α) and the polyethylene-like glass transition (α_PE) within alkyl nanodomains formed by aggregated alkyl rests. It is shown that amorphous as well as semicrystalline PnAMA can be understood as nanophase-separated polymers with alkyl nanodomains having a typical dimension of 1-2 nm. The results are compared with the predictions of simple morphological pictures for side chain polymers. X-ray scattering data for the amorphous and semicrystalline PnAMA are included in the discussion. Common aspects of nanophase-separated systems in both states as well as differences caused by crystallization are discussed. Indications for the existence of rigid amorphous regions are compiled. Different approaches to explain a similar increase of T_g(α_PE)—the glass temperature of the amorphous alkyl nanodomains—and T_M—the melting temperature of crystalline alkyl nanodomains—with side chain length are considered. Pros and cons of both approaches, based on increasing order within the alkyl nanodomains and confinement effects in nanophase-separated systems, are discussed. Main trends concerning crystallization and cooperative dynamics are compared with those in other systems with self-assembled nanometer confinements like microphase-separated blockcopolymers or semicrystalline main chain polymers.     

引入δ-内酯疏水取代烷基结构实现聚对二氧环己酮的性能调控

可反复化学循环、可生物降解的聚对二氧环己酮(PPDO),存在水解降解快等问题,不利于其储存和使用.基于此,本文通过将不同正烷基取代的δ-内酯(RVL)分别与对二氧环己酮(PDO)在磷酸二苯酯催化下本体共聚,高效地合成了3种结构和组分可控的PPDO基共聚物(PDRVL).通过热重分析(TGA)、差示扫描量热分析(DSC)...     

烷基化程度对N-十八烷基化聚乙烯亚胺梳状高分子结构的影响

利用烷基化方法制备了烷基化取代程度(DS)介于47%～17.6%的N-十八烷基聚乙烯亚胺(PEI18C)梳状高分子.通过红外光谱、差示扫描量热法(DSC)、X-射线衍射和热失重分析等方法研究了PEI18C梳状高分子的结构、结晶行为和热稳定性,探讨了侧链烷基DS对C18侧链结晶及临界结晶行为的影响.结果发现,随DS的降低,PEI18C梳状高分子的结晶度由54.0%降至20.3%,可结晶碳原子数目由11.4个降到4.3个.受限于PEI骨架上C18烷基侧链的堆积排列模式并没有发生根本变化,仍以六方晶胞的形式进行排列.结果表明,侧链烷基DS或沿主链的侧链烷基分布密度对梳状高分子的结晶行为和临界结晶能力有明显的影响.从侧链结晶的角度,分析了侧链烷基取代度对梳状高分子结晶及热稳定性的影响.     

Liquid crystalline conjugated polymers and their applications in organic electronics

This article describes the syntheses and electro‐optical applications of liquid crystalline (LC) conjugated polymers, for example, poly(p‐phenylenevinylene), polyfluorene, polythiophene, and other conjugated polymers. The polymerization involves several mechanisms: the Gilch route, Heck coupling, or Knoevenagel condensation for poly(p‐phenylenevinylene)s, the Suzuki‐ or Yamamoto‐coupling reaction for polyfluorenes, and miscellaneous coupling reactions for other conjugated polymers. These LC conjugated polymers are classified into two types: conjugated main chain polymers with long alkyl side chains, namely main‐chain type LC polymers, and conjugated polymers grafting with mesogenic side groups, namely side‐chain type LC conjugated polymers. In general, the former shows higher transition temperature and only nematic phase; the latter possesses lower transition temperature and more mesophases, for example, smectic and nematic phases, depending on the structure of mesogenic side chains. The fully conjugated main chain promises them as good candidates for polarized electroluminescent or field‐effect devices. The polarized emission can be obtained by surface rubbing or thermal annealing in liquid crystalline phase, with maximum dichroic ratio more than 20. In addition, conjugated oligomers with LC properties are also included and discussed in this article. Several oligo‐fluorene derivatives show outstanding polarized emission properties and potential use in LCD backlight application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2713–2733, 2009     

Synthesis and properties of polymer brushes composed of poly(diphenylacetylene) main chain and poly(ethylene glycol) side chains

Novel cylindrical polymer brushes consisting of poly(diphenylacetylene) main chain and poly(poly(ethylene glycol) methyl ether monomethacrylate) (PPEGMA) side chains were synthesized by the diphenylacetylene macromonomer or side chain initiated atom transfer radical polymerization (ATRP) of poly(ethylene glycol) methyl ether monomethacrylate (PEGMA) from an bromo isobutyryl-bearing poly(diphenylacetylene) (poly(BrDPA)) method. The diphenylacetylene macromonomer, namely, DPA-PPEGMA, were prepared by the ATRP of PEGMA from bromo isobutyryl-bearing diphenylacetylene. DPA-PPEGMA was polymerized successfully with WCl₆-Ph₄Sn catalyst to give high molecular weight polymer brushes poly(DPA-PPEGMA). Meanwhile, polymer brushes (PDPA-g-PPEGMA) were obtained by ATRP of PEGMA from poly(BrDPA). The molecular weight of the side chains of PPEGMA could be controlled simply by modulating the ATRP time. The macromonomer and polymer brushes are soluble in nonpolar solvents such as toluene and chloroform. The polymers of poly(BrDPA) and poly(DPA-PPEGMA) absorb in the longer wavelength region, with two peaks at around 370 and 414 nm. The polymers are thermally stable and exhibit double crystallization and melting peaks during the cooling and heating scans.     

Higher aliphatic polyaldehydes. II. Polymer structure and polymer stability of poly(n-heptaldehyde)

Poly(n-heptaldehyde) has been prepared by anionic and cationic polymerization at ?60°C in methyl cyclohexane. The anionic polymer is more crystalline and of a higher degree of isotactic structure than the somewhat rubbery but still crystalline cationic polymer. The polymers have been acetate-endcapped to improve their thermal stability. Cationic polymer, when endcapped and purified, begins to degrade above room temperature; even crystalline anionic polymer degrades at a reasonable rate at 100°C. The crystallinity of poly(n-heptaldehyde) is caused by crystallization of the acetalic main chain as well as the side chain. Two regions of melting have been recognized by DSC analysis and by microscopic observations. The low melting region between 80 and 100°C has been identified as the melting of the paraffinic side chains of poly(n-heptaldehyde). It consists of three clearly definable endotherms at 78, 87, and 101°C.     

Comb-like ionic complexes of cationic surfactants with bacterial poly(gamma-glutamic acid) of racemic composition

Comb-like ionic complexes, nATMA . PG(DL)GA, were prepared from microbial poly(gamma-glutamic acid), with a nearly racemic configuration, and alkyltrimethylammoniun bromides, with linear alkyl chains containing an even number of carbon atoms, n, ranging from 12 to 22. The complexes had a nearly stoichiometric composition, displayed thermal stability up to temperatures above 200 degrees C and were insoluble in water but soluble in organic solvents. In the solid state, they were arranged in a regularly layered structure with the alkyl side chain crystallized for n > or = 18. Heating above melting entailed a contraction in the interlayer distance which varied from 1 to 10% depending on the value of n. Comparison with data reported on similar complexes obtained from nearly enantiomerically pure poly(gamma-glutamic acid) revealed an overall behavior very similar for the two series but with specific significant differences concerning side chain crystallinity and dimensional response to temperature.     

N-烷基化聚对苯二甲酰对苯二胺梳状高分子中烷基侧链对刚性主链堆积行为的影响

基于聚对苯二甲酰对苯二胺(PPTA), 采用N-烷基化方法制备了系列PPTACns(烷基侧链碳原子数n=8, 10, 12, 14, 16, 18)刚性主链梳状高分子, 利用DSC, XRD和FTIR等方法研究了其主链堆积行为、 分子链构象及热性能等与烷基侧链长度及结晶特性之间的关系. XRD和DSC结果表明, 当烷基侧链碳原子数达到14时, 烷基侧链发生结晶. XRD结果显示, PPTACns具有层状结构, 烷基侧链长度对主链层间距影响显著. FTIR研究发现, 烷基侧链的聚集状态对PPTACns分子链的构象产生较大影响, 伴随着烷基侧链结晶的熔融, PPTACns的分子链构象发生显著改变. 烷基侧链处于熔融状态的PPTACns的ν_C=O和γ_C-H谱带峰位与烷基侧链不结晶的PPTACn接近.     

Water‐vapor permeation in semicrystalline and molten poly(octadecyl acrylate)

The water‐vapor permeability of poly(octadecyl acrylate) (PA‐18) was measured as a function of temperature in the region traversing its melting point (50 °C). The molten‐state permeability of PA‐18 is comparable to that of shorter side‐chain methacrylate polymers. Water permeability in the semicrystalline state of PA‐18 is similar to that of polyethylene at comparable crystallinity levels. The permeation switch, or change in permeability with the traversing of the melting point, for water is discussed in the context of previous results for other penetrants in this and other side‐chain crystalline polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 979–984, 2001     

Ionic Complexes of Biotechnological Polyacids with Cationic Surfactants

Summary: Stoichiometric complexes of biotechnological poly(γ-glutamic) acid and poly(β,L -malic) acid with alkyltrimethylammonium surfactants of long alkyl chains could be readily prepared in aqueous medium. They adopt a biphasic layered structures in which the main chain and the side chain alternate with nanometric periodicity. Alkyl side chains show reversible melting that involves generation of mesophases. Complexes degraded by water by different mechanisms depending on the constitution of the main chain; the polymalic complexes underwent surface erosion whereas the polyglutamic ones degraded in bulk. Erythromycin could be homogenously loaded into the paraffinic subphase of the complexes and delivered upon incubation under physiological conditions in parallel to the hydrolysis of the polymer.     

Revisiting the crystallization of poly(2‐alkyl‐2‐oxazoline)s

Poly(2‐alkyl‐2‐oxazoline)s (PAOx) exhibit different crystallization behavior depending on the length of the alkyl side chain. PAOx having methyl, ethyl, or propyl side chains do not show any bulk crystallization. Crystallization in the heating cycle, that is, cold crystallization, is observed for PAOx with butyl and pentyl side chains. For PAOx with longer alkyl side chains crystallization occurs in the cooling cycle. The different crystallization behavior is attributed to the different polymer chain mobility in line with the glass transition temperature (T_g) dependency on alkyl side chain length. The decrease in chain mobility with decreasing alkyl side chain length hinders the relaxation of the polymer backbone to the thermodynamic equilibrium crystalline structure. Double melting behavior is observed for PButOx and PiPropOx which is explained by the melt‐recrystallization mechanism. Isothermal crystallization experiments of PButOx between 60 and 90 °C and PiPropOx between 90 and 150 °C show that PAOx can crystallize in bulk when enough time is given. The decrease of T_g and the corresponding increase in chain mobility at T > T_g with increasing alkyl side chain length can be attributed to an increasing distance between the polymer backbones and thus decreasing average strength of amide dipole interactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 721–729     

Structure and mobility of a series of poly(alkyl l-glutamate)s studied by VT 13C CPMAS NMR spectroscopy

VT CPMAS NMR measurements were carried out for a series of poly(alkyl l-glutamate)s (PALG) which have n-alkyl side chains with carbon numbers ranging from 2 to 12 in order to investigate the structure and mobility of the main and the side chains. From the temperature dependencies of the peak intensities for the PALGs, the relative mobilities of the main and side chains are discussed. For PG-2 and PG-4, the molecular motions of both the main and side chains are not very fast. From the amount ratio between the main and side chains, the main chain dominates the entire mobility of the polymer. As the side chain length increases, the side chain motion is drastically activated by a temperature change. In addition, the main chain motion is induced by the side chain motion. For PALGs with long alkyl side chains, the mobilities of the polymers are governed by the structure and mobility of the side chain.     

Side‐chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)‐graft‐poly(ethylene glycol) and poly(methyl acrylate)‐graft‐poly(ethylene glycol)

Graft copolymers consisting of amorphous main chain, poly(methyl methacrylate) (PMMA), or poly(methyl acrylate) (PMAc), and crystalline side chains, poly(ethylene glycol) (PEG), have been prepared by copolymerization of PEG macromonomers with methyl methacrylate or methyl acrylate (MMAx or MACx, respectively). Because of the compatibility of PMMA/PEG and PMAc/PEG, from small‐angle X‐ray scattering results, the main and side chains in graft copolymers were suggested to be homogeneous in the molten state. Differential scanning calorimetry (DSC) cooling scans revealed that PEG side chains for graft copolymers with large PEG fractions were crystallized when the sample was cooled, with a cooling rate of 10 °C/min. The spherulite pattern observed by a polarized optical microscope suggested the growth of PEG crystalline lamellae. Crystallization of PEG in MMAx was more restrained than in MACx. From these results, we have concluded that the crystallization behavior of the grafted side chains is strongly influenced by the glass transition of a homogeneously molten sample as well as dilution of the crystallizable chains. Domain spacings for isothermally crystallized graft copolymers were described by interdigitating chain packing in crystalline–amorphous lamellar structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 79–86, 2005     

Construction of lamellar morphology by side-chain crystalline comb-like polymers for gas barrier

A comb-like polymer containing crystallized alkyl side chains and the intermolecular hydrogen bonds between the linking groups was fabricated by grafting long-chain fatty amine onto poly(styrene-co-acrylic acid)_n (P(S-AA)_n, wherein “n” denoted AA feed ratio). The chemical structures and crystallization behaviors of the comb-like polymer P(S-AA)_n-g(p) (wherein “p” denoted the number of side-chain carbon atoms) were analyzed by Fourier transform infrared, gel permeation chromatography, X-ray photoelectron spectroscopy, and X-ray diffractometer, differential scanning calorimetry, atomic force microscopy, respectively. It was found that the lamellar morphology could be generated by controlling the grafting density and side chain length of P(S-AA)_n-g(p). Moreover, it was identified that the hydrogen bonds between amide groups could enhance the crystallinity and then adjust the interlamellar spacing of lamellar phase. As a result, P(S-AA)₇₀-g(18) with the highest degree of crystallinity and closely packed lamellar morphology showed a good gas-barrier performance, and the nitrogen permeability reached 1.78 × 10^?14 cm³·cm/cm²·s·Pa. Furthermore, the permeation switch of the obtained comb-like polymer could reach 500 times traversing the melting point.     

Ionic Complexes of Polyacids and Cationic Surfactants

Comb-like ionic complexes were prepared from polyuronic acids (pectinic and alginic acids) and alkyltrimethylammonium surfactants bearing linear alkyl chains with 18, 20 and 22 carbon atoms. In the condensed state, these complexes were able to self-assemble in ordered structures which were thermally stable up to ∼200 °C. The complexes were analysed by DSC and WAXS/SAXS and compared to their analogous made from poly(γ-glutamic acid). They all adopt a biphasic layered structure in which the main chain and the alkyl side chain alternate with a nanometric periodicity. Alkyl side chains were partially crystallized in these complexes and they show reversible melting at temperatures within the 60-80 °C range depending on the length of the polymethylene segment.     

Molecular level structures of poly(n-alkyl methacrylate)s with different side chain lengths at the polymer/air and polymer/water interfaces

Sum frequency generation (SFG) vibrational spectroscopy has been successfully applied to study molecular structures of several poly(n-alkyl methacrylate)s (PAMAs) with different side chain lengths at the PAMA/air and PAMA/water interfaces. We have observed that the ester side chains from all PAMAs always dominate the interface, but the orientation information of the methyl end group on the side chains varies, depending on the length of the side chain. The contributions from methylene groups on the side chains have been evaluated, and the surface structures have been related to the surface tension of these polymers. Different water restructuring behaviors have been observed for different PAMAs. This phenomenon and its reversibility are strongly dependent on the glass transition temperature of each polymer, which is influenced by the side chain length. Detailed data fitting and analysis has been discussed.