Influence of the melting conditions of heavy metal oxide glasses containing bismuth oxide on their optical absorption

Glasses of the systems Bi₂O₃-SiO₂, Bi₂O₃-PbO-Ga₂O₃, Bi₂O₃-PbO-Ga₂O₃-GeO₂ and Bi₂O₃-GeO₂-Li₂O have been prepared and the interaction of their melts with crucibles of different materials has been analytically determined. Silica and porcelain crucibles were very strongly corroded and the glass composition was noticeably altered. Instead platinum crucibles are not affected if the Bi₂O₃ content is not too high. The color of the glasses changes in all cases from pale yellow to deep brown when the melting temperature reaches approximately 1000 °C. The higher the temperature and the Bi₂O₃ content the darker the brown color, independently of the nature of the employed crucible. The addition of oxidizing ions (Sb⁵⁺, As⁵⁺ or Ce⁴⁺) to the glass batch prevents darkening. Nanoparticles of elementary bismuth Bi⁰ are observed by transmission electron microscopy in the glasses melted above 1000 °C. The partial thermoreduction of the Bi₂O₃ during the heating of the glass melt is proposed as the mechanism responsible for the observed darkening.     

Effect of synthesis method on the structure and properties of AgPO3-based glasses

The relation between ionic conductivity, glass transition temperature and structure has been investigated in silver-metaphosphate, AgPO₃, glasses synthesized under varying conditions. The key finding of this work concerns the AgPO₃ doping with up to 3 mol.% Al₂O₃ when melting is done in alumina crucibles, a practice used widely for the synthesis of fast ion conducting glasses. Vibrational spectroscopy showed that Al₂O₃-doping increases the phosphate network connectivity by P-O-Al-O-P cross-links. This effect causes a drastic enhancement in ionic conductivity and glass transition temperature relative to Al₂O₃-free AgPO₃ glasses obtained by melting in Pt crucibles.     

Solubility of Ag2O into the Na2O–B2O3–Al2O3 system

The solubility of Ag₂O was measured for the Na₂O–B₂O₃ and Na₂O–B₂O₃–Al₂O₃ system with the rotating crucible method and static method, respectively, under air atmosphere at temperatures ranging from 1273 to 1423 K. The contamination of melts from crucibles could be avoided by the rotating crucible method, with which it became possible to measure the solubility of Ag₂O for the Na₂O–B₂O₃ system above the melting point of Ag for the first time. It was found that the addition of Na₂O decreases the solubility of Ag₂O while the addition of Al₂O₃ had little effect on the solubility. The effect of Na₂O and Al₂O₃ on the solubility of Ag₂O is expressed by interaction coefficients and is analyzed in terms of the basicity of melts. The solubility of Ag₂O in Na₂O–B₂O₃–Al₂O₃ melts increased with increased temperature. This phenomena was explained by a small enthalpy change in oxidation of silver.     

Electric conductivity of glasses in the system Na2O/CaO/SiO2/Fe2O3

The addition of polyvalent transition metal ions to the usually insulating traditional soda-lime-silica glasses can lead to semiconducting properties. We report on synthesis of glasses and glass-ceramics in a soda-lime-silicate based system containing Fe₂O₃ in the concentration range from 5 to 30 mol%. Two sub-systems were considered, in one of them the ratio [Na₂O]/[Fe₂O₃] was varied while in the other one, the ratio [SiO₂]/[Fe₂O₃] was changed. The phase composition of the synthesized products was characterized by X-ray diffraction and energy dispersive X-ray analysis, while the electrical properties were studied by impedance spectroscopy. Partially crystallized non-reduced samples are semiconducting even at room temperature while the glassy samples (both reduced and non-reduced) exhibit semiconducting properties at temperatures equal or larger than 100 °C. An attempt is done to predict the physical approximation explaining the conduction process in the glasses.     

Dielectric relaxation in iron-containing borate glasses

The ac and dc conductivities, dielectric constant and dielectric loss of a series of calcium borate glasses containing Fe₂O₃ up to 10 mol% were measured as a function of temperature (300–700 K) and frequency (10²–10⁵ c/s). Glasses melted in platinum crucibles were found to show slightly higher dielectric constants and conductivities than glasses melted in zirconia crucibles under the same melting conditions. Relaxation effects with a distribution of relaxation times were observed for all the glasses of this system. The data show that the pre-exponential factor τ₀ is about 10^?11 s. Peaks in tan δ were found to shift to higher temperatures when the frequency of measurements was increased. Activation energy for dc conduction was found to be equal to that of ac conduction. No polarization effects were observed in these glasses, indicating that conduction is predominantly electronic.     

Structural analysis and devitrification of glasses based on the CaO-MgO-SiO2 system with B2O3, Na2O, CaF2 and P2O5 additives

Glasses, whose basic composition was based on the CaO-MgO-SiO₂ system and doped with B₂O₃, P₂O₅, Na₂O, and CaF₂, were prepared by melting at 1400 °C for 1 h. Raman and infrared (IR) spectroscopy revealed that the main structural units in the glass network were predominantly Q¹ and Q² silicate species. The presence of phosphate and borate units in the structure of the glasses was also evident in these spectra. X-ray analysis showed that the investigated glasses devitrified at 750 °C and higher temperatures. The crystalline phases of diopside and wollastonite dominated, but weak peaks, assigned to akermanite and fluorapatite, were also registered in the diffractograms. The presence of B₂O₃, Na₂O, and CaF₂ had a negligible influence on the assemblage of the crystallized phases, but it caused a reduction of crystallization temperature, comparing to similar glasses of the CaO-MgO-SiO₂ system.     

Structural investigations of copper doped B2O3-Bi2O3 glasses with high bismuth oxide content

Raman and infrared spectroscopy have been employed to investigate the 99.5%[xB₂O₃(1−x)Bi₂O₃]0.5%CuO glasses with different Bi/B nominal ratios (0.07?x?0.625) in order to obtain information about the competitive role of B₂O₃ and Bi₂O₃ in the formation of the glass network. The glass samples have been prepared by melting at 1100 °C and rapidly cooling at room temperature. In order to relax the structure, to improve the local order and to develop crystalline phases the glass samples were kept at 575 °C for 10 h. The influence of both Bi₂O₃ and CuO on the vitreous B₂O₃ network as well as the local order changes around bismuth and boron atoms in as prepared and heat treated samples was studied. Structural modifications occurring in heat treated samples compared to the untreated glasses have been observed.     

Glass formation in the Sb2O3-CdCl2-SrCl2 ternary system

Vitreous systems based on antimony oxide Sb₂O₃ have been investigated. The limits for glass formation are reported in the Sb₂O₃-CdCl₂-SrCl₂ ternary system, and in the Sb₂O₃-SrCl₂-(0.5CdCl₂ + 0.5ZnCl₂) pseudo ternary system. Amorphous state is confirmed by XRD patterns. Thermal measurements implemented by differential scanning calorimetry show that Tg is above 300 °C. As a general trend, Tg increases with chloride content. These glasses have an extended transmission in the mid-infrared spectrum with a refractive index larger than 2. The influence of the CdCl₂/Sb₂O₃ substitution on the physical properties has been studied in the (90 − x)Sb₂O₃-xCdCl₂-10SrCl₂ system: thermal expansion, Vickers microhardness, Young and bulk modulus decrease as cadmium concentration increases. An inverse dependence is observed for shear modulus. This behaviour is discussed in relation to structural hypothesis.     

Structural peculiarities, and electrical and optical properties of 70TeO2·30PbCl2 glasses doped with Pr, prepared in Pt or Au crucibles

The influence of crucibles (Au or Pt) on the structure, electrical, dielectric and optical properties of 70TeO₂·30PbCl₂ glasses doped with Pr³⁺ added as a metal, chloride, or oxide, in concentrations of 500–1500 wt-ppm, is reported. The dc conductivity of ‘pure’ glasses prepared in Au crucibles is two orders of magnitude higher than that of those prepared in Pt crucibles. Upon doping, the dc conductivity of glasses prepared in Pt and Au crucibles increases or decreases, respectively. The static relative permittivity is equal to 33 ± 2. In the range of 640–700 nm, six photoluminescence (PL) peaks were observed, at 641.5, 647.1, 652.4, 660.8, 662.9, and 664.5 nm. In the range of 200–1200 cm⁻¹, seven Raman scattering (RS) peaks were observed at 184, 217, 321, 468, 654, 735 cm⁻¹, and a small peak at 650 cm⁻¹. Both spectra were deconvoluted using symmetrical Gaussian functions. Relative intensities of PL and RS bands depend on the concentration and chemical form of Pr³⁺ and on the material of the crucible. However, positions of these bands are independent of these conditions.     

Elastic constants and structure of the vitreous system Co3O4P2O5

The elastic moduli of the entire vitreous range of the system CoPO that can be prepared by melting together Co₃O₄ and P₂O₅ oxides in open crucibles, have been measured by ultrasonic techniques at 15 MHz. The bulk, shear, longitudinal and Young's moduli and the Poisson ratio are found to be rather sensitive to the glass composition. It is found from this ultrasonic data, that the glass system can be divided into “three compositional regions”. This behaviour is qualitatively interpreted in terms of the cobalt co-ordination, crosslink densities, interatomic force constants and atomic ring sizes. Also presented is a full discussion of effects of annealing on elastic properties.     

Linear optical properties of BaNaB9O15, BaLiB9O15 and SrLiB9O15 glasses

Transparent BaNaB₉O₁₅ (BNBO), BaLiB₉O₁₅ (BLBO) and SrLiB₉O₁₅ (SLBO) glasses were fabricated via the conventional melt-quenching technique. X-ray diffraction (XRD) and Differential thermal analysis (DTA) studies carried out on the as-quenched glasses confirmed their amorphous and glassy nature, respectively. The optical properties for these as-quenched glasses were investigated. The refractive index, optical band gap, Urbach energy and Fermi energy were determined. The average electronic polarizability calculated from the refractive index expression.     

Infrared transmission of (R2O OR R’O)–(TiO2, Nb2O5 OR Ta2O5)-Al2O3 glasses

The new families of aluminate glasses obtained by the present authors from their melts in the systems K₂O–Ta₂O₅–Al₂O₃, Na₂O–K₂O–Ta₂O₅–Al₂O₃, K₂O –Cs₂O– Ta₂O₅–Al₂O₃, K₂O–Nb₂O₅–Al₂O₃, Na₂Oz.sbnd;K₂O–TiO₂–Al₂O₃, BaO–TiO₂–Al₂O₃, BaO–ZrO₂–TiO₂–Al₂O₃ and Na₂O–K₂O–BaO–ZrO₂–Ta₂O₅–TiO₂ –Al₂O₃ showed high transmissions of visible and infrared (IR) radiation ranging from 0.4 to about 6 μm, as well as high refractive indices up to 2.0. Their physical and chemical properties such as glass-forming ability, softening temperature, hardness and hygroscopicity were comparable to conventional silicate glasses. These properties are useful for IR applications. The cause of the high IR transmission of the aluminate glasses was interpreted in terms of the masses of the constituent cations and the single bond strengths of the cations with oxygen ions.     

Sulfur behavior in silicate glasses and melts: Implications for sulfate incorporation in nuclear waste glasses as a function of alkali cation and V2O5 content

The presence of sulfur in radioactive waste to be incorporated in borosilicate glasses entails difficulties mainly due to the relatively low solubility of sulfates in the vitreous phase. In this work a study is presented on the effects of the ratio R = [Na₂O]/[B₂O₃], the type of sulfate added and the addition of V₂O₅ on the incorporation of sulfates in borosilicate glasses. Glass samples were prepared at the laboratory scale (up to 50-100 g) by melting oxide and sulfate powders under air in Pt/Au crucibles. XRF and ICP/AES chemical analysis, SEM/EDS, microprobe WDS and Raman spectroscopy were employed to characterize the fabricated samples. The main experimental results confirm that the incorporation of sulfates in borosilicate glasses is favored by the network depolymerization, which evolves with the ratio R. The addition of V₂O₅ seems to accelerate the kinetics of sulfur incorporation in the glass and, probably, increase the sulfate solubility by modifying the borate network and fostering the formation of voids of shape and size compatible with the sulfur coordination polyhedron in the glassy network. The kinetics of X₂SO₄ incorporation in the glass seems to be slower when X = Cs.     

Fabrication and properties of novel low-melting glasses in the ternary system ZnO-Sb2O3-P2O5

Glasses in the ternary system ZnO-Sb₂O₃-P₂O₅ were investigated as potential alternatives to lead based glasses for low temperature applications. The glass-forming region of ZnO-Sb₂O₃-P₂O₅ system has been determined. Structure and properties of the glasses with the composition (60 − x)ZnO-xSb₂O₃-40P₂O₅ were characterized by infrared spectra (IR), differential thermal analysis (DTA) and X-ray diffraction (XRD). The results of IR indicated the role of Sb³⁺ as participant in glass network structure, which was supported by the monotonic and remarkable increase of density (ρ) and molar volume (V_M) with increasing Sb₂O₃ content. Glass transition temperature (T_g) and thermal stability decreased, and coefficient of thermal expansion (α) increased with the substitution of Sb₂O₃ for ZnO in the range of 0-50 mol%. XRD pattern of the heat treated glass containing 30 mol% Sb₂O₃ indicated that the structure of antimony-phosphate becomes dominant. The improved water durability of these glasses is consistent with the replacement of easily hydrated phosphate chains by corrosion resistant P-O-Sb bonds. The glasses containing ?30 mol% Sb₂O₃ possess lower T_g (<400 °C) and better water durability, which could be alternatives to lead based glasses for practical applications with further composition improvement.     

Synthesis and physical properties of glasses in the Sb2O3-PbCl2-MoO3 system

Lead chloroantimonite glasses form stable binary glasses that may accommodate numerous oxides or halides as a third component. Molybdenum trioxide is a glass progenitor leading to molybdate glasses. Ternary glasses have been synthesized and studied in the Sb₂O₃-PbCl₂-MoO₃ system. Compositional limits of glass formation are reported and two series of glass samples have been prepared corresponding to the general formulas: (90 − x)Sb₂O₃-xPbCl₂-10MoO₃ and (90 − x)Sb₂O₃-xMoO₃-10PbCl₂. Glass transition temperature is close to 290 °C at high Sb₂O₃ content and decreases as antimony oxide is substituted by MoO₃ or PbCl₂. Position, width and intensity of crystallization peak suggest that devitrification rate is small in some composition ranges. The evolution of density, thermal expansion, refractive index and microhardness has been studied as a function of composition parameter x. Deviations from linearity are observed. They suggest structural changes in the case of the MoO₃/Sb₂O₃ substitution while it appears that molar volume increases linearly versus lead content in the other series of glasses. Refractive index is close to 2.04. Optical transmission ranges from 550 nm in the visible spectrum to 5.5 μm in the infrared. It is limited by extrinsic absorption bands arising from hydroxyls and silicon impurities. Young's, bulk and shear moduli have been measured for the two series of samples.     

Thermal and electrical properties of BaO-B2O3-ZnO glasses

Glasses in the BaO-ZnO-B₂O₃ system were examined as potential replacement for PbO glass frits with low firing temperature (500-600 °C) for the dielectric layer of a plasma display panel (PDP). The glasses were evaluated for glass transition temperature (T_g), thermal expansion coefficient (α) and dielectric constant ε. The electrical and the thermal properties were also compared with theoretical data calculated by a known empirical equation. T_g of the glasses varied between 480 and 560 °C, and α was in the range of 7-9×10⁻⁶ K⁻¹. The dielectric constant ranges from 14 to 19 and the theoretical data showed lower α and ε than the experimental data. The results suggest that BaO-ZnO-B₂O₃ glasses would be suitable as an alternative to Pb-based dielectric layer in PDPs.     

The structure of SiO2-GeO2 glasses: A spectroscopic study

Four glasses of the SiO₂-GeO₂ binary system have been synthesized via a sol-gel route followed by a heat treatment and a quench. Glass structure has been determined by Ge K-edge X-ray absorption spectroscopy (XAS) at low temperature and Raman spectroscopy. These mixed glasses present a continuous random network of interconnected GeO₄ and SiO₄ tetrahedra, with GeO₄ tetrahedra similar to the GeO₄ units in GeO₂ glass and continuous compositional variations from GeO₂-rich regions to SiO₂-rich regions. Such a random mixture is consistent with physical properties of these binary glasses as well as with the chemical dependence of their polyamorphism at high pressure. This EXAFS-derived mean Ge-O-Si angles are close to the Ge-O-Ge mean angle in GeO₂ glass, 134° and 130°, respectively. This misfit with the Si-O-Si angles might explain the ease of formation of isolated and pair defects centers, which are suspected to be at the origin of photo-induced modifications of optical properties in Ge-bearing SiO₂ glasses.     

Influence of Y2O3 on structural and optical properties of SiO2-BaO-ZnO-xB2O3-(10−x) Y2O3 glasses and glass ceramics

SiO₂-BaO-ZnO-xB₂O₃-(10−x) Y₂O₃, (0 ≤ x ≤ 10) glasses are synthesized. The effect of Y₂O₃ on the structural and optical properties of glasses has been investigated using different characterization techniques. The results are discussed in light of non-bridging oxygens (NBO), optical basicity and heat-treatment of glasses. The band gap has been calculated for as cast and heat-treated glasses. The band gap energy is found to decrease with the increasing content of Y₂O₃ in the glasses and heat-treatment. The presence of the crystalline phase in the glass matrix showed remarkable effect on band gap which decreases to semiconducting range.     

Quenched glasses in the systems of Li2O with Al2O3, Ga2O3 and Bi2O3

By rapid quenching in a twin roller apparatus, glass was found to occur widely in the systems of Li₂O with Al₂O₃, Ga₂O₃, Bi₂O₃ and in mixed systems. Examination of the resulting flakes by X-ray powder diffraction, differential thermal analysis, and capacitance data revealed the occurrence of glass, glass transitions, crystallization exotherms and the nature of some of the crystallization paths.The log ionic conductivity of the glasses was found to follow a linear relationship with the Li concentration. Evidence was observed for three new metastable crystalline phases, one in the Li₂OAl₂O₃ system and two in the Li₂OBi₂O₃ system. The latter system also showed evidence for the occurrence of two glasses at almost all compositions.     

Dielectric analysis of tungsten-phosphoniobate 20A2O-30WO3 -10Nb2O5 -40P2O5 (A = Li, Na) glass-ceramics

New phosphate glasses of the quaternary system A₂O-Nb₂O₅-WO₃-P₂O₅, where X = Li and Na were prepared by the melt-quenching method. The introduction of WO₃ in the glass composition was based on the proposal of analysing the effect of the diminishing of the molar amount of the alkaline oxide and thus decreasing the molar ratio between network modifiers and network formers (M/F).In the present work we present the preparation of 20A₂O-30WO₃-10Nb₂O₅-40P₂O₅ (A = Li, Na) transparent glasses. These glasses were heat-treated in air, at 550 °C and 650 °C for 4 h. The structure of the obtained samples was studied by X-ray powder diffraction (XRD) and Raman spectroscopy and the morphology by scanning electron microscopy (SEM). The dc (σ_dc), ac (σ_ac) conductivity and dielectric spectroscopy measurements were performed in the function of the temperature and were related with the structural changes of the glass structures.