Dipole moments of selenophene analogs of the chalcones

The dipole moments of 24 selenophene analogs of the chalcones have been measured and have been compared with the data calculated by a vectorial additive scheme and also with their chemical structures. Considerations are expressed on the conformational state of the molecules of the compounds investigated. The existence of a correlation between the dipole moments the intramolecular distances, and the Hammett's -parameters has been shown. The applicability of Higashi's equation to the calculation of for , -unsaturated ketones is pointed out.     

Studies on the electrical double layer structure at the water/air interface

Effective dipole moments (calculated from experimental data of surface tension and electric surface potential) of some homologous normal alcohols and carboxylic acid were found to vary linearly with the number of carbon atoms in the hydrocarbon chain. Values of effective dipole moments were used for the determination of the effective dipole moments of water molecules , and the dielectric permittivity of the water subphase (₁), as well as in the vicinity of the hydrophobic part of adsorbed molecule (₂). The latter was found to decrease with the increase of the hydrocarbon chain length. Knowing the effective dipole moment of surface water dipoles, the average orientation angle () of water molecules at the inteface was estimated. The calculated potential drop of water varies within the range –0.038 to –2.38 V for two extreme orientations of water dipoles at the surface.     

Upper bounds to atomic electron densities in position and momentum spaces

Modified functions r ^–(r) and p ^–(p) of the spherically averaged electron densities (r) in position space and (p) in momentum space are found to be convex (i.e., the second derivatives are nonnegative everywhere) for all the 103 ground-state atoms from hydrogen (atomic number Z=1) to lawrencium (Z=103), if the parameters are chosen to be 0.6 and 1.4. The convex property of r ^–(r) and p ^–(p) is used to derive upper bounds to the density functions (r) and (p) in terms of their radial moments r ^s and p ^s or frequency moments ^t and ^t . In most cases, the present bounds are shown to be more general and more accurate than those reported in the literature.     

Thermal analysis of complexes of cadmium chloride picoline

The thermal decomposition of the, and- picoline complexes of cadmium were studied by means of TG-DTG-DTA. In connection with the preparation of the complex compounds, it was established that the ligand number was influenced by the reaction medium. The thermal decomposition took place stepwise, and intermediates were formed which could be isolated with a derivatograph by the freezing-in method. The structures and properties of these previously unknown compounds were investigated by far-IR spectroscopy and X-ray powder diffraction.

---

Zusammenfassung Der thermische Zersetzungsprozess der Komplexverbindungen von Cadmiumchlorid mit-, - oder-Picolin wurde durch simultane TG-DTG-DTA im Derivatograph untersucht. Die Ligandenzahl der Komplexverbindungen wird durch das Reaktionsmedium bei der Präparation beeinflusst. Die thermische Zersetzung erfolgt stufenweise, Zwischenprodukte konnten mittels Derivatograph durch die Einfriermethode isoliert werden. Struktur und Eigenschaften dieser bisher unbekannten Verbindungen wurden durch Fern-IR-Spektroskopie und Röntgenpulverbeugung untersucht.

---

- -, -. , . , « ». .

     

Phase equilibria in the Tl2Te-Ag2Te system

The phase diagram for the Tl₂Te-Ag₂Te system has been established by thermal analysis and X-ray diffraction methods. The results obtained are compared with the data of other authors. Examples are given of using the disadvantages of thermal analysis for the correct interpretation of experimental data.

---

Zusammenfassung Das Phasendiagramm von Tl₂Te-Ag₂Te wurde durch thermische Analyse und röntgendiffraktometrie ermittelt. Die erhaltenen Ergebnisse werden mit denen anderer Autoren verglichen. Beispiele werden angeführt, wie die Nachteile der thermischen Analyse zur korrekten Interpretation der experimentellen Daten benutzt werden können.

---

Tl₂Te-Ag₂Te. . .

     

Structure électronique comparée des isomères conjugués du benzène

The molecular orbitals and energy levels of and electrons in benzene, fulvene and 3,4-dimethylenecyclobutene have been calculated by the LCAO-SCF method, using a basis set of Gaussian orbitals. According to the values of binding energy, the larger stability of benzene is due to a electrons rather than to electrons. The main part of dipole moments arises from electrons.     

Solution of the generalized eigenvalue equation perturbed by a generalized low rank perturbation

Summary The problem of finding eigenvalues and eigenstates of the generalized perturbed eigenvalue equation = g3(+) is considered. The eigenvalues and the eigenstates of the unperturbed eigenvalue equation = are assumed to be known. Matrices , and can be arbitrary, except for the requirement that be nonsingular and that the eigenstates of the unperturbed equation be complete. It is shown that the eigenvalues and the eigenstates of the perturbed equation can be easily obtained if the rank of the generalized perturbation , is small. A special case of low rank perturbations are piecewise local perturbations which are common in physics and chemistry. If the perturbation is piecewise local with fixed localizability, the operation count for the derivation of a single eigenvalue and/or a single eigenstate is (n). If the perturbation has a fixed rank, the operation count for the derivation of all eigenvalues and/or all eigenstates is (n ²).Research supported by the Welch Foundation of Houston, Texas, and by the Yugoslav Ministry for Development (Grant P-96)     

Catalytic epoxidation of propylene with tert-butyl peroxide in presence of molybdenum complexes on polymer carriers

A polymer catalyst has been synthesized on the basis of Amberlite IRA-45 anion-exchange resin modified with molybdenum hexacarbonyl. Its catalytic activity in the epoxidation of propylene with tert-butyl hydroperoxide is similar to the activity of Mo(CO)₆ used under homogeneous conditions.

---

, - Amberlite IRA-45, . - Mo(CO)₆, .

     

Diaqua[N,N-di(2-carboxyethyl)-o-anisidinato]copper(II) Dihydrate [Cu(o-Andp)(H2O)2] · 2H2O: Synthesis and Crystal Structure

Crystals of [Cu(o-Andp)(H₂O)₂] · 2H₂O (where o-Andp^2–is -anisidine-N,N-di-3-propionate) were synthesized and studied using X-ray diffraction analysis. The crystals are triclinic: a= 12.063(1) Å, b= 12.483(3) Å, c= 13.586(2) Å, = 91.29(1)°, = 111.67(1)°, = 104.00(1)°, V= 1830.5(5) ų, space group P , Z= 2, and R= 0.0528 for 5965 reflections with I2(I). The two crystallographically independent complexes are isostructural. The tetragonal–bipyramidal coordination of copper(III) involves three O atoms, the N atom of the tetradentate ligand o-Andp^2–, and two O atoms from water. The aminodipropionate group of the ligand (average Cu–O 1.939 Å and Cu–N 2.051 Å) and one of the coordinated water molecules (Cu–O(w) 1.991 Å) lie in the equatorial plane. The second water molecule (Cu–O(w) 2.32 Å) and the methoxy O atom of o-Andp^2–(Cu–O 2.37 Å) are in the apical positions of the bipyramid.     

Formulas for \bar \beta parameters and their limitations

The operator relationship p=[r, h] between linear momentum, position vector and Hamiltonian is the basis for an investigation of formulas for ¦ atomic orbitals is discussed. Formulas for parameters useful in extended Hückel methods are presented.

---

Zusammenfassung Die Operatorengleichung p=[r, h] zwischen Impuls, Ortsvektor und Hamiltonoperator ist die Grundlage für eine Untersuchung von Formeln für -Parameter in der erweiterten Hückel[1]- und CNDO [2]-Methode. Das Eichproblem dieser Gleichung in Verbindung mit abgebrochenen Entwicklungen für Matrixelemente ¦P¦ über Atomfunktionen wird diskutiert. Nützliche Formeln für die erweiterte Hückel-Methode werden abgeleitet.

---

Résumé La relation entre opérateurs moment linéaire, position et hamiltonien: p=[r, h] sert de base à une étude de formules pour les paramètres dans les méthodes de type Hückel étendu [1] et CNDO [2]. Le problème de jauge de cette équation est discuté par rapport au développement limité des éléments de matrice ¦P¦ dans une base d'orbitales atomiques. Présentation de formules pour les paramètres utiles dans les méthodes Hückel étendu.

     

Topological aspects of differential thermal analysis

The most important calorimetric methods have been reviewed: the differential thermal analysis (DTA) as basic disposition and the scanning calorimetry (DSC) as well as the adiabatic rate calorimetry (ARC). The thermal circuits of these are expressed by bond diagrams as conceived by topological thermodynamics. It has been stated that the heat flux associated with the process of transformation is virtually (uncompensated) transferred in the DTA system, really transferred (compensated) in the DSC and ARC systems, between the two containers through a transfer medium assumed to be purely dissipative.

---

Zusammenfassung Eine Übersicht über die wichtigsten kalorimetrischen Methoden, sowie die Differentialthermoanalyse (DTA) als Grundverfahren, die Abtastkalorimetrie (DSC) und die adiabatische Geschwindigkeitskalorimetrie (ARC) wird gegeben. Die thermischen Kreise derselben werden durch Bindungsdiagramme, wie sie an Hand der topologischen Thermodynamik erhalten werden, ausgedrückt. Es wurde festgestellt, dass die Wärmeströmung mit dem Umwandlungsprozess assoziiert scheinbar (unkompensiert) in das DTA-System, wahrhaftig (kompensiert) in die Systeme DSC und ARC übertragen wird, undzwar zwischen den zwei Behältern durch ein als rein zerstreuend angenommenes Transfermedium.

---

Résumé Mise au point sur les méthodes calorimétriques les plus importantes: l'analyse thermique différentielle (ATD) comme technique de base, l'analyse calorimétrique différentielle à compensation de puissance (DSC) et la calorimétrie à vitesse adiabatique (ARC). Les circuits thermiques de ces techniques s'expriment par des diagrammes de liaisons comme ceux conçus par la thermodynamique topologique. On établit que le flux de chaleur associé au processus de la transformation est virtuellement transferré (sans compensation) en ATD et réellement transferré (avec compensation) en DSC et ARC, entre les deux conteneurs par un milieu de transfert supposé être purement dissipatif.

---

: ( ) , () (). , . , , , . , .

     

Kinetic conversion of complex hydrocarbon mixtures in reforming on platinum/alumina catalysts

General forms of the kinetic equations for the conversion of various hydrocarbons in reforming of multicomponent gasoline fractions on platinum/alumina catalysts have been confirmed experimentally by using a gradientless method.

---

.

     

Ligand-Promoted Transformation of the μ3-η2-Vinylidene Ligand in the Reaction between RuCo2(CO)9(μ3-η2-C=CHPh) and 4,5-Bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd). X-Ray Structure of RuCo2(CO)7(bpcd)(μ3-η2-C=CHPh)

The reaction of the heterometallic vinylidene cluster RuCo₂(CO)₉(₃-²-C=CHPh) with the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) proceeds readily in the presence of Me₃NO to furnish the new cluster RuCo₂(CO)₇(bpcd)(₃-²-C=CHPh) as the sole product. This cluster has been isolated by preparative chromatography and characterized in solution by IR spectroscopy. The molecular structure was determined by X-ray diffraction analysis, which has confirmed the chelation of the bpcd ligand to the ruthenium center and the change in the coordination mode exhibited by the vinylidene ligand. RuCo₂(CO)₇(bpcd)(₃-²-C=CHPh) crystallizes in the triclinic space group P , a = 10.5788(9), b = 11.909(1), c = 19.526(2) Å, = 84.491(9)°, = 78.068(8)°, = 63.760(7)°, V = 2158.7(4) ų, Z = 2, and d _calc = 1.581.     

Effect of the activation conditions on the catalytic properties of Pt/Al2O3 catalysts

The effect of the activation conditions of Pt/Al₂O₃ catalysts has been investigated in the hydrogenation of benzene and in the hydrogenolysis of ethane. Whatever the conditions of calcination or reduction, specific activities of all catalysts for benzene hydrogenation remain constant. On the other hand, for identical dispersities, the cacination in a wet argon flow increases the specific activity of platinum for hydrogenolysis of ethane, pointing out the role of wet pretreatment on defect building or on the faceting of supported metallic catalysts.

---

Pt/Al₂O₃ . , . , , . .

     

Determination of water content by means of the Derivatograph

The determination of water content by means of the Derivatograph is treated in the paper. The determination of water in analytical precipitates, various pharmaceutical products, biological substances, the products of food industry is treated on the basis of some practical examples. The applicability of the Derivatograph for determining the adsorption capacity of industrial adsorbents, the hydration conditions of cement, the system Ca₃A-CaSO₄ · H₂O and the rehydrability of clay minerals is demonstrated. The aluminium oxide barrier layers were investigated on the basis of the water content of the aluminium hydroxide. For the characterization of the different strengths by which water is bound in strontium chloride hydrates the apparent activation energies are also presented.

---

Zusammenfassung Die Bestimmung von Wasser mit Hilfe des Derivatographen wurde besprochen. Es wurden die verschiedenen Anwendungsmöglichkeiten der Methode, wie die Bestimmung des Wassers in analytischen Niederschlägen, Arzeneimitteln, Lebensmittel, biologischen Substanzen an Beispielen besprochen. Die Anwendbarkeit des Derivatographen zur Bestimmung der Adsorptionskapazität von industriellen Adsorbenten, der Hydrationsverhältnisse von Zement, des Systems Ca₃A-CaSO₄ · H₂O und der Rehydration von Tonmineralien wurde erörtert. Aluminiumoxydgrenzschichten konnten auf Grund des Wassergehalts des Aluminiumhydroxyds geprüft werden. Zur Charakterisierung der verschiedenen wasserbindenden Kräfte werden die Werte der scheinbaren Aktivierungsenergien der Alkalierdchlorid-hydrate vorgelegt.

---

Résumé L'article traite de la détermination de la teneur en eau à l'aide du Derivatograph. La méthode est exposée en se servant d'exemples pratiques comme les précipités analytiques, divers produits pharmaceutiques, alimentaires, des substances biologiques. On montre que le Derivatograph peut être utilisé pour déterminer la capacité d'adsorption des adsorbants industriels, pour examiner l'hydration du ciment, du' système Ca₃A-CaSO₄ · H₂O et la rehydration des minéraux argileux. Examination des couches interfaces d'oxyde d'aluminium sur Ja base de la teneur en eau du hydroxide d'aluminium. L'énergie d'activation apparente a été déterminée et utilisée pour caractériser les différentes forces de liaison de l'eau dans les chlorures alcalino-terreux hydratés.

---

, .

     

A thermal decomposition study of some nickel(II)thioureachloride complexes

TG/DTA and Thermal Degradation Mass spectrometry (TDMS) data are presented for a series of nickel(II)thiourea chloride complexes: NiL₄Cl₂:L=thiourea or methyl-, dimethyl-, tetramethyl-, di-n-butyl, naphthyl-, ethylene- or allylthiourea. Two different thermal decomposition mechanisms are proposed for these complexes, and it is apparent that the thermal decomposition mechanism adopted by a particular complex depends on the structure of the relevant thiourea ligand and not on the nature of the halide ligand or on the existence of geometrical isomerism for these complexes.

---

Zusammenfassung Durch TG, DTA und thermodegradative Massenspektrometrie (TDMS) von Nickel(II)-thioharnstoff-chlorid-Komplexen, NiL₄Cl₂ (L=Thioharnstoff oder Methyl-, Dimethyl-, Tetramethyl-, Di-n-butyl-, Naphthyl-, Vinyl- oder Allylharnstoff), erhaltene Daten werden angegeben. Zwei verschiedene Mechanismen werden für die thermische Zersetzung vorgeschlagen. Es ist offensichtlich, daß der Mechanismus, nach der die thermische Zersetzung eines gegebenen Komplexes verläuft, von der Struktur des relevanten Thioharnstoffliganden und nicht von der Natur des Halidliganden oder vom Vorliegen einer geometrischen Isomerie abhängt.

---

/ - NiL₄Cl₂, L= , -, -, -, ---, -, - . . , .

     

Studies on the thermal behaviour of detonating fuse and detonators

Investigations of the thermal stability of detonating fuse containing 10 g pentaerythrol tetranitrate (PETN) revealed that the cord burnt under unconfinement at 403 K. Under confinement in a steel pipe or copper tube there was a partial detonation at 403 K. In order to characterize the thermal stability of PETN and pyrotechnic composition used in fuse head of electric detonators differential thermal analysis (DTA) was used.The electric detonators of aluminium cell and copper cell were heated from ambient temperature to 373 K at an average rate of 0.4 deg/min. The rate of heating was increased gradually to 1.5 deg/min till explosion. The detonation temperature varied between 373 K and 375 K.The impact and friction sensitivity of detonating fuse was poor. There was no detonation when a 5 kg hammer was repeatedly hit over the fuse from a height of one metre. There was no detonation when the detonating fuse was rubbed by a blunt edge of steel plate till it was smashed.

---

Zusammenfassung Untersuchungen der thermischen Stabilität von Sprengschnuren mit 10 gm^–1 PETN zeigten, daß die Schnur frei bei 403 K verbrennt. Unter Abschluß in einem Stahloder Kupferrohr tritt bei 403 K eine partielle Detonation auf. Zur Charakterisierung der thermischen Stabilität von PETN und von pyrotechnischen Mischungen, die in Zünderköpfen von elektrischen Sprengkapseln verwendet werden, wurde Differentialthermoanalyse (DTA) angewendet. Die elektrischen Sprengkapseln von Aluminium- und Kupferzellen wurden mit einer durchschnittlichen Aufheizgeschwindigkeit von 0.4 Grad/min von Raumtemperatur auf 373 K erhitzt. Die Aufheizgeschwindigkeit wurde bis zur Explosion allmählich auf 1,5 Grad/min erhöht. Die einzelnen Detonationen erfolgten bei einer Temperatur zwischen 373 und 375 K. Die Stoß- und Reibempfindlichkeit der Sprengschnur war gering. Bei einem mehrmaligen Einwirken eines 5 kg-Hammers aus einer Höhe von 1 m erfolgte keine Detonation. Bei Reiben mit der unscharfen Kante einer Stahlplatte bis zur Zerstörung erfolgte keine Detonation.

---

, 10 ^–1 PETN, , 403 , 403 . PETN , , . 373 0,4°/. 1,5°/ . 373 375 . . 5 1 . , .

---

---

The authors are indebted to the Director, Central Mining Research Station for giving permission to publish this paper. The views expressed in the paper are those of the authors and not necessarily of the institute which they belong to.     

Etude des transitions de phase du sulfate dibasique de plomb PbSO4, 2PbO: Influence de la vitesse de montee en temperature et de L'histoire thermique

Basic lead sulfate, PbSO₄·2PbO, was studied by means of DTA, X-ray diffraction and scanning electron microscopy. DTA runs at different heating rates showed that two kinds of thermal evolution are possible for PbSO₄·2PbO. IfT<40 deg h^–1, we have the normal process according to the following transitions: IfT>40 deg h^–1 the-PbSO₄·2PbO phase appears at 440 C, but is unstable and breaks down into monobasic and tetrabasic lead sulfates. Reaction enthalpies were evaluated and correlated with the cell volume variations determined by X-ray diffraction. An interpretation of the existence of two types of process is proposed.

---

Zusammenfassung Basisches Bleisulfat PbSO₄·2PbO wurde mittels DTA, Röntgendiffraktometrie und Scanningelektronenmikroskopie untersucht. DTA-Versuche mit unterschiedlichen Aufheizgeschwindigkeiten haben gezeigt, da\ PbSO₄·2PbO auf zwei verschiedene Weisen thermisch gebildet werden kann. Bei¯T<40·h^–1 verlÄuft der normale Proze\ entsprechend den Reaktionsgleichungen Bei¯T>40 h^–1 tritt die-PbSO₄· 2PbO-Phase bei 440 C auf, ist jedoch instabil und zerfÄllt zu monobasischem und tetrabasischem Bleisulfat. Die Reaktionsenthalpien wurden bestimmt und mit den röntgendiffraktometrisch ermittelten VerÄnderungen des Elementarzellenvolumens in Beziehung gesetzt. Die Existenz von zwei Typen des Prozesses wird interpretiert.

---

, - PbSO₄·2PbO. , , . 40 /. « » : 40/ 440 C PbSO₄·2PbO, , , . , - . .

---

---

Nous remercions F. Chapuis et M. Andréani (Lab. Matériaux, E. C. F.) qui ont réalisés les clichés de microscopie.     

Influence of olefins on the catalytic transformation of paraffins on acidic zeolites

The activity and selectivity of zeolites in n-octane cracking in a gradientless flow reactor and in a flow-circulation setup with intermediate hydrogenation have been studied. At concentrations lower or equal to 10^–3 mmol/l, olefins are not involved in the cleavage of paraffin molecules. At concentrations higher than 10^–3 mmol/l, olefins act as promoters of the cracking reactions.

---

- - . , 10^–3 / . 10^–3 / .