Novel stereoselective control over cis vs trans opening of benzo[c]phenanthrene 3,4-diol 1,2-epoxides by the exocyclic N(2)-amino group of deoxyguanosine in the presence of hexafluoropropan-2-ol

We describe a novel and efficient synthesis (62-84% yields) of the eight possible, diastereomerically pure, cis and trans, R and S O(6)-allyl-protected N(2)-dGuo phosphoramidite building blocks derived through cis and trans opening of (+/-)-3alpha,4beta-dihydroxy-1beta,2beta-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-1 (1)] and (+/-)-3alpha,4beta-dihydroxy-1alpha,2alpha-epoxy-1,2,3,4-tetrahydrobenzo[c]phenanthrene [BcPh DE-2 (2)] by hexafluoropropan-2-ol (HFP)-mediated addition of O(6)-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3) at C-1 of the epoxides. Simply changing the relative amount of HFP used in the reaction mixture can achieve a wide ratio of cis/trans addition products. Thus, the observed cis/trans adduct ratio for the reaction of DE-1 (1) in the presence of 5 equiv of 3 varied from 17/83 to 91/9 over the range of 5-532 equiv of HFP. The corresponding ratios for DE-2 (2) varied from 2/98 to 61/39 under the same set of conditions. When 1 or 2 was fused with a 20-fold excess of 3 at 140 degrees C in the absence of solvent HFP, almost exclusive trans addition (>95%) was observed for the both DEs. Through the use of varying amounts of HFP in the reaction mixture as described above, each of the eight possible phosphoramidite oligonucleotide building blocks (DE-1/DE-2, cis/trans, R/S) of the BcPh DE N(2)-dGuo adducts can be prepared in an efficient fashion. To rationalize the varying cis-to-trans ratio, we propose that the addition of 3 to 1 or 2 in the absence of solvent or in the presence of small amounts of HFP proceeds primarily via an S(N)2 mechanism to produce mainly trans-opened adducts. In contrast, increasing amounts of HFP promote increased participation of an S(N)1 mechanism involving a relatively stable carbocation with two possible conformations. One of these conformations reacts with 3 to give mostly trans adduct, while the other conformation reacts with 3 to give mostly cis adduct.     

Fluorinated alcohol mediated control over cis vs trans opening of benzo[a]pyrene-7,8-diol 9,10-epoxides at C-10 by the exocyclic amino groups of O6-allyl protected deoxyguanosine and of deoxyadenosine

A detailed study was carried out on the stereoselective control of cis- vs trans-opening of (+/-)-7beta,8alpha-dihydroxy-9beta,10beta-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene {B[a]P DE-1 (1)} and (+/-)-7beta,8alpha-dihydroxy-9alpha,10alpha-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene {B[a]P DE-2 (2)} at C-10 by the exocyclic amino groups of protected purine nucleosides in the fluorinated alcohols trifluoroethanol (TFE), hexafluoropropan-2-ol (HFP), and perfluoro-tert-butanol (PFTB). Addition of the 2-amino group of O6-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3) and of the 6-amino group of 3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyadenosine (4) occurs at C-10 of the epoxides. The observed cis:trans ratio for the reaction of DE-1 (1) in the presence of 5 equiv of 3 over the range of 10-250 equiv of fluorinated alcohol varied from 53:47 to 87:13 for TFE, 60:40 to 92:8 for HFP, and 52:48 to 73:27 for PFTB. The corresponding ratios for DE-2 (2) varied from 22:78 to 72:28 for HFP under the same set of conditions. In contrast, the corresponding ratios for DE-2 (2) remained unchanged ( approximately 40:60) for TFE and for PFTB over the range of 25-250 molar equiv. Unlike the addition of the dGuo reactant 3, the corresponding addition of the dAdo reactant (4) to the DEs (1 or 2) in over 25 molar equiv of TFE occurred highly stereoselectively to afford only cis adducts for both DEs. A highly efficient HPLC separation of dGuo adduct diastereomers derived from DE-2 (2) was developed using acetone as a modifier in CH2Cl2 or in n-hexane. Through the use of varying molar ratios of the different fluorinated alcohols described above and the newly developed HPLC separation method, the four possible phosphoramidites (cis/trans, R/S) of the B[a]P DE-2 N2-dGuo adducts can be prepared in an efficient fashion on gram scale for use in oligonucleotide synthesis.     

Transition-state effects in acid-catalyzed aryl epoxide hydrolyses

The hydronium ion-catalyzed hydrolyses of 5-methoxyindene 1,2-oxide and of 6-methoxy-1,2,3,4-tetrohydronaphthalene-1,2-epoxide were each found to yield 75-80% of cis diol and only 20-25% of trans diol as hydrolysis products. The relative stabilities of the cis and trans diols in each system were determined by treating either cis or trans diols with perchloric acid in water solutions and following the approach to an equilibrium cis/trans mixture as a function of time. These studies establish that the trans diol in each system is more stable than the corresponding cis diol. Thus, acid-catalyzed hydrolysis of each epoxide, which proceeds via a carbocation intermediate, yields the less stable cis diol as the major product. Transition-state effects, presumably of a hydrogen-bonding nature, selectively stabilize the transition state for attack of water on the intermediate 2-hydroxy-1-indanyl carbocation leading to the less stable cis diol in this system. Transition-state effects must also be responsible for formation of the less stable cis diol as the major product in the acid-catalyzed hydrolysis of 5-methoxy-1,2,3,4-tetrahydronaphthalene 1,2-epoxide. However, in this system steric effects at the transition state may be more important than hydrogen bonding in determining the cis/trans diol product ratio. The synthesis of 5-methoxyindene 1,2-oxide and a study of its rate of reaction as a function of pH in water and dioxane-water solutions are reported. Both an acid-catalyzed reaction leading to only diol products and a pH-independent reaction yielding 71% of 5-methoxy-2-indanone and 29% of diols are observed; the half-life of its pH-independent reaction in water is only 2.4 s.     

Synthesis of 3,4-disubstituted piperidines by carbonyl ene and prins cyclizations: switching between kinetic and thermodynamic control with Brønsted and Lewis acid catalysts

A novel approach to cis and trans 3,4-disubstituted piperidines is described. Carbonyl ene cyclization of aldehydes 4a-e catalyzed by MeAlCl(2) in refluxing chloroform afforded the trans piperidines 7a-e with diastereomeric ratios of up to 93:7, while aldehyde 4f afforded solely the cis product 6f, which was resistant to isomerization to the trans isomer. It was demonstrated for 4a that the cyclization catalyzed by a variety of Lewis acids at low temperature proceeded under kinetic control to afford predominantly the cis piperidine 6a, and this isomerized to the thermodynamically more stable trans piperidine 7a on warming. In contrast, Prins cyclization of 4a-e catalyzed by concentrated hydrochloric acid in CH2Cl2 at low temperature afforded cis piperidines 6a-e with diastereomeric ratios of up to >98:2. The yield and diastereoselectivity of these cyclizations could be improved by using HCl-saturated CH2Cl2 to form the corresponding chloride, followed by elimination of HCl effected by ammonia. Aldehydes 4f and 4galso cyclized in good yield under the latter conditions. Mechanistic studies supported by DFT calculations (B3LYP/6-31G(d)) suggest that the cyclizations proceed via a mechanism with significant carbocationic character, with the cis carbocation being more stable than the trans carbocation. DFT calculations (B3LYP/6-31G(d)) of the transition state energies for concerted cyclization show that the cis piperidine is also the favored product from cyclization through a more concerted mechanism.     

Alpha'-hydroxy enones as achiral templates for Lewis acid-catalyzed enantioselective Diels-Alder reactions

alpha'-Hydroxy enones react with dienes in the presence of (S,S)-[Cu(tBu-box)](OTf)2 or (S,S)-[Cu(tBu-box)](SbF6)2 (2 to 10 mol %) to afford the corresponding Diels-Alder adducts in high yield and selectivity. Isomeric ratios (regioselectivity, endo/exo or cis/trans) of up to >99:1 and ee values of up to >99% are obtained. Significantly, difficult dienes such as isoprene, 2,3-dimethyl butadiene and piperylene behave satisfactorily. Subsequent oxidative cleavage of the ketol in the resulting cycloadducts by treatment with cerium ammonium nitrate (CAN) yields the corresponding enantiopure carboxylic acids. Alternatively, carbonyl addition and subsequent diol cleavage with CAN produces the corresponding ketone adducts.     

Theoretical Study of Halogen Effect in Isomerization of 2-Halo-[9]-annulen Anion at the DFT Level

Cis-trans isomerization of [9]-annulenanion(1) and its 2-fluoro-,2-chloro-and 2-bromo-derivatives(2,3 and 4,respectively) were investigated at the HF/6-31G* and B3LYP/6-311++G** levels of theory.Cis,cis,cis,cis structures appear more stable than their corresponding cis,cis,cis,trans-isomers.The relative height of energy barriers for cis-trans isomerization is:2cis > 1cis > 3cis > 4cis.This trend for the reverse trans-cis isomerization follows the electronegativity of the substituent at C-2(2trans > 3trans > 4trans > 1trans).     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Highly stereoselective radical carbonylations of gem-dihalocyclopropane derivatives with CO

A couple of radical carbonylations of gem-dihalocyclopropanes 1 using CO and Bu3SnH (formylation) or Bu3Sn(CH2CH=CH2) (allylacylation) successfully proceeded to give trans and cis adducts (2 and 3) with good to excellent stereoselectivity (trans/cis = >99/1-75/25 or 17/83-1/99). The formylation of 2,3-cis-disubstituted 1,1-dihalocyclopropanes enhanced trans selectivity (trans/cis = >99/1-95/5), whereas both 2,3-cis-disubstituted and 2-monosubstituted 1,1-dihalocyclopropanes underwent allylacylation with nearly complete trans selectivity (trans/cis = >99/1). Inherently less reactive gem-dichloro- and bromochlorocyclopropanes than gem-dibromocyclopropanes served as favorable substrates. [reaction: see text].     

Fluorinated alcohol mediated displacement of the C10 acetoxy group of benzo[a]pyrene-7,8,9,10-tetrahydrotetraol tetraacetates: a new route to diol epoxide-deoxyguanosine adducts

We describe a novel trifluoroethanol (TFE) or hexafluoropropan-2-ol (HFP) mediated substitution reaction of the bay-region C10 acetoxy group in four stereoisomeric 7,8,9,10-tetraacetoxy-7,8,9,10-tetrahydrobenzo[a]pyrenes (tetraol tetraacetates, two pairs of cis and trans isomers at the 9,10 positions) by the exocyclic N2-amino group of O6-allyl-3',5'-di-O-(tert-butyldimethylsilyl)-2'-deoxyguanosine (3). The tetraacetates are derived from cis and trans hydrolysis of (+/-)-7beta,8alpha-dihydroxy-9beta,10beta-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (B[a]P DE-1) and of (+/-)-7beta,8alpha-dihydroxy-9alpha,10alpha-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (B[a]P DE-2) at C-10 followed by acetylation. Excellent yields and high regioselectivity were observed. Similar cis/trans product ratios were observed for each set of cis and trans tetraol tetraacetates derived from DE-1 ( approximately 75/25) and from DE-2 (approximately 67/33) in HFP. This strongly suggests that the substitution proceeds via an SN1 mechanism involving a carbocation intermediate that is common to the cis and trans tetraacetates. Since it is likely that the cis and trans products from 3 arise from different conformations of the carbocation, its lifetime must be sufficiently long to permit conformational equilibration before its capture by the purine nucleophile. The corresponding reaction of (+/-)-9alpha-bromo-7beta,8alpha,10beta-triacetoxy-7,8,9,10-tetrahydrobenzo[a]pyrene with 3 in HFP was highly regio- and stereoselective and gave exclusively trans 10beta-adducts. This newly developed substitution reaction provides an attractive alternative synthetic strategy for the preparation of polycyclic hydrocarbon adducted oligonucleotide building blocks.     

The mechanism of cooxidation of isobutyraldehyde and octene-2

The mechanism of isobutyraldehyde-octene-2 cooxidation at 20°C has been investigated. The ratio of cis to trans epoxides in the reaction products shows that, at aldehyde concentrations lower than 1.0M, the epoxide is formed mainly by a radical route. The difference in the ΔH of formation of cis and trans epoxides is around 0.8 kcal/mole at 20°. The isobutyraldehyde involved in the radical epoxidation chain has been found almost quantitatively to be isopropylhydroperoxide, which is formed through the decarboxylation of i-PrCO₂· radicals, addition of oxygen, and abstraction of hydrogen atoms from the aldehyde. A rate constant of about 14 M^?1 sec^?1 at 20° has been determined for the latter reaction. The chain length for the cooxdination reaction decreases from 75 to 20 as the isobutyraldehyde concentration goes from 1.0 to 0.3M. The termination step seems to involve mainly the interaction of two i-PrO₂ · radicals. The cooxidation of octene-2 with pivalaldehyde follows a similar mechanism, but the chain length is about ten times higher under the same experimental conditions.     

Regio- and stereoselective synthesis of aminoinositols and 1,2-diaminoinositols from conduritol B epoxide

[Chemical reaction: See text] A systematic approach to the regio- and stereoselective synthesis of aminoinositols and 1,2-diaminoinositols arising from tetra-O-benzylconduritol B epoxide (9) and its aziridine analogue 22, respectively, is described. In all cases, the synthetic methodologies rely on the regio- and stereocontrolled azidolysis of the starting precursors to give the corresponding trans regioadducts. Subsequent functional group manipulation under strict configurational control affords the isomeric cis adducts. Chemoselective functionalization of the diamine moiety in 1,2-diaminoinositol derivatives can be achieved by the proper design of the reaction sequence and choice of reagents. The described protocols allow efficient access to each of the eight possible configurations of the 1,2-diamino and 1,2-amino alcohol moieties from chemical modifications of the epoxide moiety on the common precursor 9.     

Experimental evidence for multiple oxidation pathways in the (salen) Mn-catalyzed epoxidation of alkenes

The substrate electronic effects on the selectivity in the catalytic epoxidation of para-substituted cis stilbenes 2a-i were investigated by using (R,R)-[N,N'-bis(3,5-di-tBu-salicylidene)-1,2-cyclohexanediamine]manganese(III) chloride 1 in benzene as the catalyst with iodosobenzene as the terminal oxidant. A Hammett study of the selectivity results reveals a stronger electrophilic character than previously assumed in the (salen)Mn-catalyzed reaction. In general, the best correlations with the experimental values were obtained by using the Hammett sigma + values, which gave rho = -1.37 for the rate of cis-epoxide formation and rho = -0.43 for the rate of the stepwise process leading to the corresponding trans product. The reaction involves two separate pathways as indicated also by the competitive breakdown of the intermediate on the path to trans epoxide for methoxy-substituted substrates. The asynchronicity in the concerted pathway leading to cis epoxide is apparent for 4-methoxy-4'-nitrostilbene, which yields cis epoxide with 75% ee entirely as a result of electronic effects.     

New regioselective multicomponent reaction: one pot synthesis of spiro heterobicyclic aliphatic rings

In the context of our high-throughput organic synthesis program, we have studied the reactivity of special beta-keto esters toward the Biginelli reaction. We have found that a cyclic beta-keto ester reacts with one molecule of urea and two molecules of aldehyde to give a new family of spiro heterobicyclic aliphatic rings in good yields. Interestingly, the Biginelli product was not detected. After analysis of products using HPLC, 1H NMR, and 13C NMR, we have found that the reaction is driven by a regio-specific condensation of two molecules of aldehyde with the other reagents to afford only products harboring substituents exclusively in cis configuration. Monte Carlo minimization studies using MM2 force field suggest that cis products are energetically more stable than the trans counterparts. Together with previously reported data, these results suggest that the trans products were not obtained as result of steric hindrance produced by the equatorial position of one of the ring substituents. This new reaction is useful for high-throughput organic synthesis. Indeed, the new scaffold can be used to introduce additional groups in the molecules through remaining functional groups by a "domino strategy".     

Synthesis of 5-Fluoroalkyl Isoxazolidines via 1,3-Dipolar Cycloaddition of Ethyl 2-Hydropolyfluoroalk-2-enoates with Nitrones

1,3-Dipolar cycloaddition reactions of ethyl 2-hydropolyfluoroalk-2-enoates (1) with some nitrones were described. The reaction of 3,4-dihydroisoquinoline N-oxide (2) with 1 took place readily in methylene chloride at room temperature to give the corresponding 5-fluoroalkylisoxazolidines regioselectively as a mixture of two diastereoisomers (trans and cis) in high yields, while longer reaction time and higher temperature were needed in the case of non-cyclic nitrones. Under similar conditions the reaction of quinoline N-oxide (14) with 1 did not give the expected adducts and a ring-opening product was obtained.     

Highly diastereoselective synthesis of nucleoside adducts from the carcinogenic benzo[a]pyrene diol epoxide and a computational analysis

A diastereoselective synthesis of the nucleoside adducts corresponding to a cis ring-opening of the carcinogen (+/-)-7 beta, 8 alpha-dihydroxy-9 alpha,10 alpha-epoxy-7,8,9,10-tetrahydrobenzo[a]pyrene (BaP DE-2) by 2'-deoxyadenosine and 2'-deoxyguanosine is described. The key intermediate (+/-)-10alpha-amino-7beta,8alpha,9alpha-trihydroxy-7,8,9,10-tetrahydrobenzo[a]pyrene was synthesized by a highly diastereoselective dihydroxylation wherein phenylboronic acid was a water surrogate. The resulting boronate ester was converted to a tetraol derivative in which two of the four hydroxyl groups (trans 7, 8) were protected as benzoate esters while the remaining two (cis 9, 10) were free. The cis glycol entity was then subjected to a reaction with 1-chlorocarbonyl-1-methylethylacetate to yield an intermediate chloro monoacetoxy dibenzoate. Displacement of the halide with azide, complete cleavage of the esters, and catalytic reduction of the azide yielded the requisite amino triol. Fluoride displacement from appropriately protected nucleoside derivatives, 6-fluoropurine 2'-deoxyribonucleoside and 2-fluoro-2'-deoxyinosine, by the amino triol then yielded diastereomeric pairs of diol epoxide-adducted 2'-deoxyadenosine (dA) and 2'-deoxyguanosine (dG) nucleosides. Small aliquots of these adducts were separated for characterization purposes. The present approach provides the first diastereoselective synthesis of the cis adducts of BaP DE-2 with 2'-deoxyguanosine as well as the first synthesis of both dA and dG adducts from a common intermediate. An informative analysis of the 1H NMR spectra of the cis adducts synthesized and comparisons to the trans adducts are reported. To gain insight into the diastereoselectivity in the key dihydroxylation step, a computational analysis, including molecular mechanics (MMFF94) and semiempirical AM1 geometry optimizations, yielded results that are in fairly good agreement with the experimental observations.     

Intramolecular interaction effects and the structure of N2OS and N2O2: An Ab initio study

An ab initio study of O?N? N?S with full geometry optimization has been carried out to corroborate the presence of an interaction between the terminal atoms in this type of structure, which, in O?N? N?O, apparently stabilizes the cis conformer. Using the unscaled 4–31G basis set with a full set of d functions on the sulfur, there is a potential minimun at the trans but not the cis geometry. A gauche conformer with a torsional angle of 77.2° is the most stable. With N₂O₂ this basis set gives potential minima at both the cis and trans geometries, but the trans conformer is slightly more stable, contrary to experiment and the results of (7,3) basis-set calculations reported in the literature in which Gaussian lobe functions were employed. Using a (9,5) basis set there is no longer a potential minimum at the cis geometry, and a gauche structure is more stable than the cis conformer as in the case of N₂OS with the less-extended basis set. Force constants (harmonic and anharmonic), compliance constants, relaxed force constants, and interaction-displacement coordinates for both molecules are compared for key structural elements.     

BiBr3-initiated tandem addition/silyl-Prins reactions to 2,6-disubstituted dihydropyrans

A tandem addition/silyl-Prins reaction efficiently affords cis-2,6-disubstituted dihydropyrans (DHPs) using 5 mol % of BiBr3 in CH2Cl2. The reaction occurs between delta-triethylsilyloxyvinyltrimethylsilanes and a variety of aldehydes to give good to excellent isolated yields of DHPs. The diastereoselectivities in the crude products are significantly affected by aldehyde substitution with electron-rich aldehydes, providing 2-3:1 (cis:trans) and neutral (or electron-poor) aldehydes affording dr > or = 19:1 (cis:trans).     

Photophysical studies of the trans to cis isomerization of the push-pull molecule: 1-(pyridin-4-yl)-2-(N-methylpyrrol-2-yl)ethene (mepepy)

Organic molecules possessing intramolecular charge-transfer properties (D-pi-A type molecules) are of key interest particularly in the development of new optoelectronic materials as well as photoinduced magnetism. One such class of D-pi-A molecules that is of particular interest contains photoswitchable intramolecular charge-transfer states via a photoisomerizable pi-system linking the donor and acceptor groups. Here we report the photophysical and electronic properties of the trans to cis isomerization of 1-(pyridin-4-yl)-2-(N-methylpyrrol-2-yl)ethene ligand (mepepy) in aqueous solution using photoacoustic calorimetry (PAC) and theoretical methods. Density functional theory (DFT) calculations demonstrate a global energy difference between cis and trans isomers of mepepy to be 8 kcal mol(-1), while a slightly lower energy is observed between the local minima for the trans and cis isomers (7 kcal mol(-1)). Interestingly, the trans isomer appears to exhibit two ground-state minima separated by an energy barrier of approximately 9 kcal mol(-1). Results from the PAC studies indicate that the trans to cis isomerization results in a negligible volume change (0.9 +/- 0.4 mL mol(-1)) and an enthalpy change of 18 +/- 3 kcal mol(-1). The fact that the acoustic waves associated with the trans to cis transition of mepepy overlap in frequency with those of a calorimetric reference implies that the conformational transition occurs faster than the approximately 50 ns response time of the acoustic detector. Comparison of the experimental results with theoretical studies provide evidence for a mechanism in which the trans to cis isomerization of mepepy results in the loss of a hydrogen bond between a water molecule and the pyridine ring of mepepy.     

Photoswitchable dendritic hosts: a dendrimer with peripheral azobenzene groups

We have studied the adducts formed by eosin (E) with a fourth generation dendrimer (D) that comprises 30 tertiary amine units in the interior and 32 naphthyl and 32 trans azobenzene units in the periphery. We have found that: (i) the all trans dendrimer D(32t) can be converted by irradiation with 365 nm light (Phi=0.12) into species containing, as an average, 4 trans and 28 cis azobenzene units, D(4t28c), that at 313 K undergoes a D(4t28c) --> D(32t) thermal back reaction (k = 7.0 x 10(-5) s(-1)); (ii) D(32t) and D(4t28c) extract 8 and, respectively, 6 eosin molecules from water at pH 7, yielding the species D(32t) subset 8E and D(4t28c) subset 6E; (iii) eosin uptake is significantly faster for D(32t) than for D(4t28c); (iv) irradiation at 365 nm of the D(32t) subset 8E species at 298 K leads to the release of two eosin molecules with formation of a photostable D(15t17c) subset 6E species (Phi = 0.15) that is also obtained from the back thermal reaction of D(4t28c) subset6E at 313 K (k = 2.7 x 10(-5) s(-1)); (v) thermal release of E from D(32t) subset 6E is much faster than from D(4t28c) subset 6E; and (vi) excitation of E in the adducts sensitizes the cis --> trans (but not the trans --> cis) isomerization. The results obtained show that the isomerization of the 32 peripheral azobenzene units controls to some extent the hosting capacity of the dendrimer and, viceversa, eosin molecules hosted in the dendrimer affect the isomerization process of its azobenzene units.     

Probing highly efficient photoisomerization of a bridged azobenzene by a combination of CASPT2//CASSCF calculation with semiclassical dynamics simulation

Mechanism of phototriggered isomerization of azobenzene and its derivatives is of broad interest. In this paper, the S(0) and S(1) potential energy surfaces of the ethylene-bridged azobenzene (1) that was recently reported to have highly efficient photoisomerization were determined by ab initio electronic structure calculations at different levels and further investigated by a semiclassical dynamics simulation. Unlike azobenzene, the cis isomer of 1 was found to be more stable than the trans isomer, consistent with the experimental observation. The thermal isomerization between cis and trans isomers proceeds via an inversion mechanism with a high barrier. Interestingly, only one minimum-energy conical intersection was determined between the S(0) and S(1) states (CI) for both cis → trans and trans → cis photoisomerization processes and confirmed to act as the S(1) → S(0) decay funnel. The S(1) state lifetime is ～30 fs for the trans isomer, while that for the cis isomer is much longer, due to a redistribution of the initial excitation energies. The S(1) relaxation dynamics investigated here provides a good account for the higher efficiency observed experimentally for the trans → cis photoisomerization than the reverse process. Once the system decays to the S(0) state via CI, formation of the trans product occurs as the downhill motion on the S(0) surface, while formation of the cis isomer needs to overcome small barriers on the pathways of the azo-moiety isomerization and rotation of the phenyl ring. These features support the larger experimental quantum yield for the cis → trans photoisomerization than the trans → cis process.