Deliberate synthesis for magnetostructural study of linear tetranuclear complexes BIIIMnIIMnIIBIII, MnIIIMnIIMnIIMnIII, MnIVMnIIMnIIMnIV, FeIIIMnIIMnIIFeIII, and CrIIIMnIIMnIICrIII. Influence of terminal ions on the exchange coupling

As part of an ongoing effort to deliberate synthesis of polynuclear heterometal complexes, we are exploring synthetic routes to high-nuclearity complexes using "metal oximates" as building blocks. Series of tetranuclear linear complex ions of the general types M(A)M(B)M(B)M(A), where M(A) is a trivalent or tetravalent metal ion and M(B) is a divalent metal ion, e.g., Mn(II), have been synthesized by using the dimetal(II) anionic cores, [(M(II)(B))(2)(dfmp)(3)](5)(-) as a bridging ligand for the terminal LM(A) fragments where H(3)dfmp is a dinucleating phenol-oxime ligand, 2,6-diformyl-4-methylphenol oxime, and L denotes a facially coordinating cyclic tridentate amine, 1,4,7-trimethyl-1,4,7-triazacyclononane. The following combinations are reported here, B(III)Mn(II)Mn(II)B(III) (1), Mn(III)Mn(II)Mn(II)Mn(III) (2), Mn(IV)Mn(II)Mn(II)Mn(IV) (3), Fe(III)Mn(II)Mn(II)Fe(III) (4), and Cr(III)Mn(II)Mn(II)Cr(III) (5). The compounds have been characterized spectroscopically and by magnetic susceptibility measurements in the temperature range 2.0-290 K at different field strengths. Complexes 1-4 have also been structurally characterized by single-crystal X-ray diffraction techniques at 100 K. The magnetic behaviors of the compounds indicate weak antiferromagnetic coupling between the manganese(II) centers in the central trisphenoxo-bridged dimanganese(II) core, whereas the coupling between the terminal M(A) and its neighboring Mn(II) center varies and is weak ferromagnetic or antiferromagnetic. The relative interaction intensity in such a series of complexes is discussed. Finally, a profound influence of the charge on the terminal metal ions on the strength of the exchange coupling in the central dimanganese(II) core has been observed and discussed in relation to the covalency of the metal-ligand bonding.     

Thermal-induced changes in molecular magnets based on prussian blue analogues

The thermal-induced changes in molecular magnets based on Prussian blue analogues, M(3)[Fe(CN)(6)](2).xH(2)O (M = Mn, Co, Ni, Cu, Zn, and Cd), were studied from infrared, X-ray diffraction, thermo-gravimetric, M?ssbauer, and magnetic data. Upon being heated, these materials loose the crystalline water that enhances the interaction between the metal centers, as has been detected from M?ssbauer spectroscopy data. At higher temperatures, a progressive decomposition process takes place, liberating CN(-) groups, which reduces the iron atom from Fe(III) to Fe(II) to form hexacyanoferrates(II). The exception corresponds to the cobalt compound that undergoes an inner charge transfer to form Co(III) hexacyanoferrate(II). In the case of zinc ferricyanide, the thermal decomposition is preceded by a structural transformation, from cubic to hexagonal. For M = Co, Ni, Cu, and Zn the intermediate reaction product corresponds to a solid solution of M(II) ferricyanide and ferrocyanide. For M = Mn and Cd the formation of a solid solution on heating was not detected. The crystal frameworks of the initial M(II) ferricyanide and of the formed M(II) ferrocyanide are quite different. In annealed Mn(II) ferricyanide samples, an increasing anti-ferromagnetic contribution on heating, which dominates on the initial ferrimagnetic order, was observed. Such a contribution was attributed to neighboring Mn(II) ions linked by aquo bridges. In the anhydrous annealed sample such interaction disappears. This effect was also studied in pure Mn(II) ferrocyanide. The occurrence of linkage isomerism and also the formation of Ni(III), Cu(III), and Zn(III) hexacyanoferrates(II) were discarded from the obtained experimental evidence.     

Differences in thermal decomposition of Ag(I), Mn(II), Fe(II) and Fe(III) complexes of cyclic dithiocarbamates

The thermal decomposition of pyrrolidinedithiocarbamate (Pyr) and piperidinedithiocarbamate (Pip) complexes of Ag(I), Mn(II), Fe(II) and Fe(III) have been investigated by thermogravimetry and differential scanning calorimetry. The decomposition intermediates and final products were identified from their X-ray diffraction patterns. Changes in their IR spectra were correlated with their thermogravimetric profiles. The hydrated compounds decomposed without loss of water and oxides were detected as the final decomposition products even in nitrogen atmosphere.     

Hydrogen peroxide formation upon oxidation of oxalic acid in presence and absence of oxygen and of manganese(II)--III. Iron(III) and copper(II) as retarders

The formation of considerable amounts of hydrogen peroxide upon the slow addition of various oxidizing agents to oxalic acid in dilute sulphuric acid in the presence of oxygen and Mn(II) is greatly retarded in the presence of Fe(III) or Cu(II). With hydrogen peroxide as oxidizing agent and a trace of Fe(II) there is considerable decomposition of peroxide, under a nitrogen atmosphere, after a few hours at 25 degrees in light (from a tungsten lamp), and less decomposition in the dark. This decomposition is decreased by Mn(II) and also when the original mixture contains Fe(III). With oxygen as the oxidizing agent Fe(II) is about 100 times as effective an inhibitor of peroxide formation as Fe(III). With all oxidizing agents used, Cu(II) is some 6-10 times more effective as a retarder than Fe(III). The inhibition is accounted for by the reaction Fe(III) [or Cu(II)] + CO(-)(2) --> Fe(II) [or Cu(I)] + CO(2).     

the extraction of some metallic bromides from aqueous solutions with methyl ethyl ketone and methyl iso-butyl ketone

The extraction of the following metals from aqueous solutions containing excess bromide with methyl ethyl ketone (MEK), and methyl isobutyl ketone MIBK has been investigated:—Cu(I), Cu(II), Zn(II), Ni(II), Co(II), Fe(II), Fe(III), Al(III), Mn(II), Sn(II) and Sn(IV). The use of MEK was found to be strictly limited by its solubility in acidic aqueous solutions. Determinations of the formulae of the extracted compounds were attempted in two cases but were found to be not wholly satisfactory and were discontinued. An interesting reaction between the cupric bromide complex and the solvents was noticed. Separations of Fe(IIl) from Mn(II), Fe(III) from Al(III), Fe(III) from Co(Il) and Fe(III) from Ni(II) could be achieved under suitable conditions.     

Cyanido-bridged Fe(III)-Mn(III) heterobimetallic materials built from Mn(III) Schiff base complexes and di- or tri-cyanido Fe(III) precursors

The reaction of [Fe(III)L(CN)(3)](-) (L being bpca = bis(2-pyridylcarbonyl)amidate, pcq = 8-(pyridine-2-carboxamido)quinoline) or [Fe(III)(bpb)(CN)(2)](-) (bpb = 1,2-bis(pyridine-2-carboxamido)benzenate) ferric complexes with Mn(III) salen type complexes afforded seven new bimetallic cyanido-bridged Mn(III)-Fe(III) systems: [Fe(pcq)(CN)(3)Mn(saltmen)(CH(3)OH)]·CH(3)OH (1), [Fe(bpca)(CN)(3)Mn(3-MeO-salen)(OH(2))]·CH(3)OH·H(2)O (2), [Fe(bpca)(CN)(3)Mn(salpen)] (3), [Fe(bpca)(CN)(3)Mn(saltmen)] (4), [Fe(bpca)(CN)(3)Mn(5-Me-saltmen)]·2CHCl(3) (5), [Fe(pcq)(CN)(3)Mn(5-Me-saltmen)]·2CH(3)OH·0.75H(2)O (6), and [Fe(bpb)(CN)(2)Mn(saltmen)]·2CH(3)OH (7) (with saltmen(2-) = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneiminato) dianion, salpen(2-) = N,N'-propylenebis(salicylideneiminato) dianion, salen(2-) = N,N'-ethylenebis(salicylideneiminato) dianion). Single crystal X-ray diffraction studies were carried out for all these compounds indicating that compounds 1 and 2 are discrete dinuclear [Fe(III)-CN-Mn(III)] complexes while systems 3-7 are heterometallic chains with {-NC-Fe(III)-CN-Mn(III)} repeating units. These chains are connected through π-π and short contact interactions to form extended supramolecular networks. Investigation of the magnetic properties revealed the occurrence of antiferromagnetic Mn(III)···Fe(III) interactions in 1-4 while ferromagnetic Mn(III)···Fe(III) interactions were detected in 5-7. The nature of these Mn(III)···Fe(III) magnetic interactions mediated by a CN bridge appeared to be dependent on the Schiff base substituent. The packing is also strongly affected by the nature of the substituent and the presence of solvent molecules, resulting in additional antiferromagnetic interdinuclear/interchain interactions. Thus the crystal packing and the supramolecular interactions induce different magnetic properties for these systems. The dinuclear complexes 1 and 2, which possess a paramagnetic S(T) = 3/2 ground state, interact antiferromagnetically in their crystal packing. At high temperature, the complexes 3-7 exhibit a one-dimensional magnetic behavior, but at low temperature their magnetic properties are modulated by the supramolecular arrangement: a three-dimensional antiferromagnetic order with a metamagnetic behavior is observed for 3, 4, and 7, and Single-Chain Magnet properties are detected for 5 and 6.     

Organic acid solutions in the chromatography of inorganic ions VIII. Cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media

Summary The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Zn(II), Cu(II), Fe(III), Sc(III), Y(III), Eu(III), Dy(III), Ho(III), Yb(III), Ti(IV) and Nb(V) in malate media at various concentrations and pH, was studied with Dowex 50 WX8 resin (200–400 mesh) in the ammonium form. Separation of Fe(III)/Cu(II), Fe(III)/Cu(II)/Zn(II), Fe(III)/Co(II)/Mn(II), Cu(II)/Ni(II)/Mn(II), Fe(III)/Cu(II)/Co(II)/Mn(II), Fe(III)/Cu(II)/Ni(II)/Cd(II), Yb(III)/Eu(III), Sc(III)/Y(III),Sc(III)/Yb(III)/Dy(III) and Nb(V)/Yb(III)/Ho(III) has been achieved, among others.This work was supported by C.N.R. of Italy.     

Synthesis and Surface Acidity of MeAPO-5 Molecular Sieves

Metal substituted aluminum phosphate molecular sieves, MeAPO-5 (Me = Co, Mn, Fe(II), Fe(III), and Mg) were synthesized and characterized with X-ray diffraction and scanning electron microscopy. The acidity was determined by temperature programmed desorption of ammonia, Desorption peaks at around 200°C were observed for all the MeAPO samples studied. Additional desorption peaks at around 300°C were found in MnAPO-5, CoAPO-5, and MAPO-5. MnAPO-5, CoAPO-5, and MAPO-5 also show good activities toward the cracking reaction of cumene at 350°C, while Fe(II)APO-5 and Fe(III)APO-5 show some activity at 500°C. The order of the cracking activity correlates with the presence of strong acidic sites in MnAPO-5, CoAPO-5, and MAPO-5 as indicated by the TPD of ammonia.     

Evidence that the β subunit of Chlamydia trachomatis ribonucleotide reductase is active with the manganese ion of its manganese(IV)/iron(III) cofactor in site 1

The reaction of a class I ribonucleotide reductase (RNR) begins when a cofactor in the β subunit oxidizes a cysteine residue ~35 ? away in the α subunit, generating a thiyl radical. In the class Ic enzyme from Chlamydia trachomatis (Ct), the cysteine oxidant is the Mn(IV) ion of a Mn(IV)/Fe(III) cluster, which assembles in a reaction between O(2) and the Mn(II)/Fe(II) complex of β. The heterodinuclear nature of the cofactor raises the question of which site, 1 or 2, contains the Mn(IV) ion. Because site 1 is closer to the conserved location of the cysteine-oxidizing tyrosyl radical of class Ia and Ib RNRs, we suggested that the Mn(IV) ion most likely resides in this site (i.e., (1)Mn(IV)/(2)Fe(III)), but a subsequent computational study favored its occupation of site 2 ((1)Fe(III)/(2)Mn(IV)). In this work, we have sought to resolve the location of the Mn(IV) ion in Ct RNR-β by correlating X-ray crystallographic anomalous scattering intensities with catalytic activity for samples of the protein reconstituted in vitro by two different procedures. In samples containing primarily Mn(IV)/Fe(III) clusters, Mn preferentially occupies site 1, but some anomalous scattering from site 2 is observed, implying that both (1)Mn(II)/(2)Fe(II) and (1)Fe(II)/(2)Mn(II) complexes are competent to react with O(2) to produce the corresponding oxidized states. However, with diminished Mn(II) loading in the reconstitution, there is no evidence for Mn occupancy of site 2, and the greater activity of these "low-Mn" samples on a per-Mn basis implies that the (1)Mn(IV)/(2)Fe(III)-β is at least the more active of the two oxidized forms and may be the only active form.     

Using silica modified by Tiron for metal preconcentration and determination in natural waters by inductively coupled plasma atomic emission spectrometry

A new adsorbent is synthesized on the basis of silica consecutively modified by polyhexamethylene guanidine and 4,5-dihydroxy-1,3-benzenedisulfonic acid (Tiron) for the group preconcentration of Fe(III), Al(III), Cu(II), Pb(II), Zn(II), and Mn(II) followed by determination by inductively coupled plasma atomic emission spectrometry. The adsorbent in the batch mode quantitatively (recovery 98?99%) extracts Fe(III), Al(III) and Cu(II) ions at pH 4.0 and Fe(III), Al(III), Cu(II), Pb(II), Zn(II), and Mn(II) ions at pH 7.0; the time of attainment of an adsorption equilibrium does not exceed 10 min. Consecutive preconcentration at pH 4.0 and 7.0 in the batch and dynamic modes ensures the quantitative separation of Fe(III), Al(III), and Cu(II) from Pb(II), Zn(II), and Mn(II) and their separate determination. The quantitative desorption of metals was attained with 0.5?1.0 M HNO₃ (5 or 10 mL). In preconcentration from 200 mL of solution with 5 mL of a desorbing solution, the preconcentration coefficient was equal to 40. The developed procedure was used for the determination of metal ions in river waters of Krasnoyarsk Krai. The results obtained were verified by the added?found method.     

Synthesis, characterization, and structures of Mn(DMHP)3 x 12H2O and Mn(DMHP)2Cl x 0.5H2O

This report describes the synthesis, characterization, and X-ray crystal structures of two Mn(III) complexes, Mn(DMHP)3 x 12H2O and Mn(DMHP)2Cl x 0.5H2O (DMHP = 1,2-dimethyl-3-hydroxy-4-pyridinone). Mn(DMHP)2Cl was prepared from the reaction of Mn(II) chloride with 2 equiv of DMHP under reflux in the presence of triethylamine. Mn(DMHP)3 was obtained by reacting Mn(II) acetate with 3 equiv of DMHP in the presence of sodium acetate. Mn(DMHP)3 could also be prepared by reacting Mn(OAc)3 x 2H2O with 3 equiv of DMHP in the presence of triethylamine. Both Mn(III) complexes have been characterized by elemental analysis, infrared spectroscopy, electronic paramagnetic resonance, electrospray ionization spectroscopy, electrochemical method, and X-ray crystallography. The X-ray crystal structure of Mn(DMHP)2Cl x 0.5H2O revealed a rare example of five-coordinated Mn(III) complexes with two bidentate ligands and a square pyramidal coordination geometry. Surprisingly, the average Mn-O (hydroxy) bond distance in Mn(DMHP)2Cl x 0.5H2O is approximately 0.025 A longer than that of the average Mn-O (carbonyl) bond, suggesting an extensive delocalization of electrons in the two pyridinone rings. The structure of Mn(DMHP)3 x 12H2O, a rare example of six-coordinate high-spin Mn(III) complexes without Jahn-Teller distortion, is isostructural to M(DMHP)3 x 12H2O (M = Al, Ga, Fe, and In). The electrochemical data for Mn(DMHP)3 suggests that the Mn(III) oxidation state is highly stabilized by three DMHP ligands. DMHP has the potential as a chelator for the removal of excess intracellular Mn and the treatment of chronic Mn toxicity.     

Organic acid solutions in the chromatography of inorganic ions-IV: cation-exchange of Mn(II), Cd(II), Co(II), Ni(II), Cu(II), Al(III) and Fe(III) in tartrate media

The cation-exchange behaviour of Mn(II), Cd(II), Co(II), Ni(II), Cu(II), Al(III) and Fe(III), in tartaric acid media was studied. Separations of Fe(III), Cu(II), Ni(II), Co(II), Cd(II) and Mn(II) on Dowex 50W X8 have been achieved.     

Thin Layer and Paper Chromatographic Separations of d-Block Cations Complexed with ANILS

Abstract

Diverse binary, ternary and quaternary mixtures of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Hg(II) and Au(III) d-block cations complexed with p-dimethylamino- and p-diethylamino- anils of thiopheneglyoxal have been separated by thin layer and paper chromatographic techniques. But quantitative separations have been done by thin layer chromatography, on account of wide difference in migration rates and high compectedness of complexes on gel layers. Chromatogram fragments visualised as such have been estimated spectrophotometrically.     

First Synthesis of a Binuclear [Mn(II)(bipy)-Fe(III)(porphyrin)] Complex: Spectroscopic Characterization and First Evidence of Reversible Formation of Manganese(III) as Manganese Peroxidase

A [(P)Fe(III)-Mn(II)] bimetallic complex, mimicking the active site of manganese peroxidase, has been synthesized. A modified highly fluorinated porphyrin, 5,10,15-tris(pentafluorophenyl)-20-(o-aminophenyl)porphyrin, has been used to introduce, through a short spacer linked to the amino function, a manganese auxiliary ligand, 6-aminomethyl-2,2'-bipyridine. Two successive metalations by FeCl(2) and MnCl(2) afforded the [(P)Fe(III)-Mn(II)] bimetallic complex that has been characterized by elemental analysis and FAB(+) mass spectrometry. X-band EPR spectroscopy and magnetic susceptibility measurements were in agreement with two high spin Fe(III) and Mn(II) centers without magnetic exchange interaction. Moreover, there is no higher intermolecular association through &mgr;-chloro bridging as observed by EPR with a simpler chloromanganese complex, Mn(bipy)(2)Cl(2), at high concentration. Addition of pentafluoroiodosobenzene in methanol at 0 degrees C led to the progressive and complete disappearance of the EPR Mn(II) signals, that were recovered after addition of a phenol. This result is consistent with Mn(III) formation. This production of Mn(III) requires the presence of the iron porphyrin and is proposed to occur through the intermediate formation of a Fe(IV) dimethoxide species which can be related to the oxidation of Mn(II) catalyzed by manganese peroxidase compound II.     

Solid phase extraction and determination of metal ions in aqueous samples using Quercetin modified Amberlite XAD-16 chelating polymer as metal extractant

A new chelating polymer has been developed using Amberlite XAD-16 anchored with Quercetin. The modified polymer was characterised by Fourier Transform Infra Red (FTIR) spectroscopy, thermogravimetric analysis, surface area analysis and elemental analysis. The Quercetin anchored polymer showed superior binding affinity for Cr(III), Mn(II), Fe(III), Co(II), Ni(II) and Cu(II) with greater than 95% adsorption under optimum conditions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 387, 313, 195, 473, 210 and 320 µmol g^?1 for Cu(II), Co(II), Cr(III), Fe(III), Mn(II) and Ni(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels, showed t _1/2 for Co(II), Cu(II), Cr(III), Fe(III), Mn(II) and Ni(II) is 20, 15, 25, 10, 30 and 15 min, respectively. Desorption of metal ions was effective with 10 mL of 2 M HCl prior to analysis using flame atomic absorption spectrophotometer. The chelating polymer was highly ion selective in nature even in the presence of interferent ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating polymer was tested on its utility with synthetic and real samples like river, tap water samples and also with multivitamin tablets. It showed relative standard deviation (R.S.D.) values of/less than 3.0% reflecting on the accuracy and reproducibility of data using the newly developed chelating polymer.     

Use of Escherichia coli immobilized on amberlite XAD-4 as a solid-phase extractor for metal preconcentration and determination by atomic absorption spectrometry.

A sensitive solid-phase extraction technique (SPE) for the enrichment of Fe(III), Co(II), Mn(II) and Cr(III) prior to atomic absorption spectrometric analysis is described. Escherichia coli immobilized on Amberlite XAD-4 was used as a solid-phase extractor. The effects of the pH, amount of solid-phase, eluent type and volume of the sample solution on the recovery of the metal ions were investigated. The effect of diverse ions was also investigated. The recoveries of Fe(III), Co(II), Mn(II) and Cr(III) under the optimum conditions were found to be 99 +/- 2, 99 +/- 3, 98 +/- 2, 98 +/- 3%, respectively, at the 95% confidence level. The detection limits of the metal ions were found as to be 2.4, 3.8, 1.3 and 1.7 ng ml(-1) for Fe(II), Co(II), Mn(II) and Cr(III) respectively, by applying a preconcentration factor of 25. The proposed enrichment method was applied to the determination of analytes in Atatürk Dam water samples, and alloy samples (RSD < 5%). The accuracy of the method was verified on certified alloy samples (NBS SRM 85b and NBS SRM 59a). The analytes were determined with a relative error lower than 5% in water and alloy samples.     

Electron paramagnetic resonance and optical absorption spectral studies on chalcocite

A chalcocite mineral sample of Shaha, Congo is used in the present study. An electron paramagnetic resonance (EPR) study on powdered sample confirms the presence of Mn(II), Fe(III) and Cu(II). Optical absorption spectrum indicates that Fe(III) impurity is present in octahedral structure whereas Cu(II) is present in rhombically distorted octahedral environment. Mid-infrared results are due to water and sulphate fundamentals.     

Mechanistic implications for the formation of the diiron cluster in ribonucleotide reductase provided by quantitative EPR spectroscopy

The small subunit of Escherichia coli ribonucleotide reductase (R2) is a homodimeric (betabeta) protein, in which each beta-peptide contains a diiron cluster composed of two inequivalent iron sites. R2 is capable of reductively activating O(2) to produce a stable tyrosine radical (Y122*), which is essential for production of deoxyribonucleotides on the larger R1 subunit. In this work, the paramagnetic Mn(II) ion is used as a spectroscopic probe to characterize the assembly of the R2 site with EPR spectroscopy. Upon titration of Mn(II) into samples of apoR2, we have been able to quantitatively follow three species (aquaMn(II), mononuclear Mn(II)R2, and dinuclear Mn(2)(II)R2) and fit each to a sequential two binding site model. As previously observed for Fe(II) binding within apoR2, one of the sites has a greater binding affinity relative to the other, K(1) = (5.5 +/- 1.1) x 10(5) M(-)(1) and K(2) = (3.9 +/- 0.6) x 10(4) M(-)(1), which are assigned to the B and A sites, respectively. In multiple titrations, only one dinuclear Mn(2)(II)R2 site was created per homodimer of R2, indicating that only one of the two beta-peptides of R2 is capable of binding Mn(II) following addition of Mn(II) to apoR2. Under anaerobic conditions, addition of only 2 equiv of Fe(II) to R2 (Fe(2)(II)R2) completely prevented the formation of any bound MnR2 species. Upon reaction of this sample with O(2) in the presence of Mn(II), both Y122* and Mn(2)(II)R2 were produced in equal amounts. Previous stopped-flow absorption spectroscopy studies have indicated that apoR2 undergoes a protein conformational change upon binding of metal (Tong et al. J. Am. Chem. Soc. 1996, 118, 2107-2108). On the basis of these observations, we propose a model for R2 metal incorporation that invokes an allosteric interaction between the two beta-peptides of R2. Upon binding the first equiv of metal to a beta-peptide (beta(I)), the aforementioned protein conformational change prevents metal binding in the adjacent beta-peptide (beta(II)) approximately 25 A away. Furthermore, we show that metal incorporation into beta(II) occurs only during the O(2) activation chemistry of the beta(I)-peptide. This is the first direct evidence of an allosteric interaction between the two beta-peptides of R2. Furthermore, this model can explain the generally observed low Fe occupancy of R2. We also demonstrate that metal uptake and this newly observed allosteric effect are buffer dependent. Higher levels of glycerol cause loss of the allosteric effect. Reductive cycling of samples in the presence of Mn(II) produced a novel mixed metal Fe(III)Mn(III)R2 species within the active site of R2. The magnitude of the exchange coupling (J) determined for both the Mn(2)(II)R2 and Fe(III)Mn(III)R2 species was determined to be -1.8 +/- 0.3 and -18 +/- 3 cm(-)(1), respectively. Quantitative spectral simulations for the Fe(III)Mn(III)R2 and mononuclear Mn(II)R2 species are provided. This work represents the first instance where both X- and Q-band simulations of perpendicular and parallel mode spectra were used to quantitatively predict the concentration of a protein bound mononuclear Mn(II) species.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.     

Structure of iron and manganese ions substituted in the framework of nanoporous AlPO-5 material

The structure of iron and managanese ions substituted in the framework of nanoporous AlPO-5 is determined by ex situ and in situ X-ray absorption spectroscopy. Fe K-edge XANES and EXAFS studies clearly indicate that iron ions are present as Fe(III) in octahedral coordination in the assynthesised material and tetrahedral coordination in the calcined material in both pure FeAlPO-5 and FeMnalPO-5. XANES and EXAFS results also indicate that reaction with hydrogen peroxide causes the removal of Fe(III) ions from the framework. Mn K-edge XANES and EXAFS of FeMnAlPO-5 samples indicate that Mn(II) ions are present in the framework, tetrahedrally coordinated, in the as-synthesised material but upon calcination it is found that the Mn(II) ions are removed from the framework, suggesting a different synthesis strategy is necessary to stabilise the Mn(II) ions in the framework simultaneously with Fe(III) ions.