光阴极微波电子枪优化设计的考虑

对光阴极微波电子枪进行了优化设计 ,给出了光阳极微波腔的形状、电参数和电场分布 .电子束团初始参数对束流横向发射度的影响 ,用 Parmela程序对其进行了优化 ,得到了一组最优参数 .考虑了补偿线圈对束流发射度的影响 ,对线圈的位置和电流的大小做了优化 .经过优化后得到腔出口处的横向发射度为 1 .39πmm.mrad,达到了设计时的要求. A 1.3 GHz photocathode RF gun is under study in peking University. The photocathode RF gun, composed of gun cavity, photocathode and Laser system, is expected to deliver a electron beam with a normalized transverse rms emittance of 1π mm·mrad at a charge of 1nC. Its performance has been studied by the space-charge tracking code PARMELA. The influences of the initialized electron beam were also studied. The emittance compensation technique is employed. After optimization of the parameters was...     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source （LUCX） is a test bench for a compact high brightness X-ray generator, based on inverse Compton Scattering at KEK, which requires high intensity multi-bunch trains with low transverse emittance. A photocathode RF gun with emittance compensation solenoid is used as an electron source. Much endeavor has been made to increase the beam intensity in the multi-bunch trains. The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects, so that the field gradient on the cathode surface is relatively higher when the forward RF power into gun cavity is not high enough. A laser profile shaper is employed to convert the driving laser profile from Gaussian into uniform. In this research we seek to find the optimized operational conditions for the decrease of the transverse emittance. With the uniform driving laser and the unbalanced RF gun, the RMS transverse emittance of a 1 nC bunch has been improved effectively from 5.46 πmm·mrad to 3.66 πmm·mrad.     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source(LUCX) is a test bench for a compact high brightness X-ray generator,based on inverse Compton Scattering at KEK,which requires high intensity multi-bunch trains with low transverse emittance.A photocathode RF gun with emittance compensation solenoid is used as an electron source.Much endeavor has been made to increase the beam intensity in the multi-bunch trains.The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects,so that the field gradient on the cathode surface is relatively higher when the forward RF power into gun cavity is not high enough.A laser profile shaper is employed to convert the driving laser profile from Gaussian into uniform.In this research we seek to find the optimized operational conditions for the decrease of the transverse emittance.With the uniform driving laser and the unbalanced RF gun,the RMS transverse emittance of a 1 nC bunch has been improved effectively from 5.46 πmm.mrad to 3.66 πmm.mrad.     

Matching by solenoids in space charge dominated LEBTs

The betatron matching of a rotationally asymmetric beam in space charge dominated low-energy beam transports （LEBTs） where solenoids are used for the transverse matching has been studied. For better understanding, the coupling elements of a beam matrix are interpreted in special forms that are products of a term defined by the Larmor rotation angle and another by the difference between the beam matrix elements in the two transverse planes. The coupling form originally derived from the rotationally symmetric field in solenoids still holds when taking into account the rotationally asymmetric space charge forces that are due to the unequal emittance in the two transverse planes. It is shown in this paper that when an LEBT mainly comprising solenoids transports a beam having unequal emittance in the two transverse planes and the linear space charge force is taken into account, the initial Twiss parameters can be modified to obtain the minimum and equal emittance at the LEBT exit. The TRACE3D calculations also prove the principle. However, when quadrupoles that are also rotationally asymmetric are involved in between solenoids, the coupling between the two transverse planes becomes more complicated and the emittance increase is usually unavoidable. A matching example using the CSNS （China Spallation Neutron Source） LEBT conditions is also presented.     

The Mixed Spin-1/2 and Spin-1 Ising–Heisenberg Model in the Mean-Field Approximation: a New Approach

Thermodynamic properties of the mixed spin-1 and spin-1/2 Ising–Heisenberg model are studied on a honeycomb lattice using a new approach in the mean-field approximation to analyze the effects of longitudinal D_z and transverse D_x crystal fields. The phase diagrams are calculated in detail by studying the thermal variations of the order parameters, i.e., magnetizations and quadrupole moments, and compared with the literature to assess the reliability of the new approach. It is found that the model yields both second-and first-order phase transitions, and tricritical points. The compensation behavior of the model is also investigated for the sublattice magnetizations, and longitudinal and transverse quadrupolar moments. The latter type of compensation is observed in the literature but its possible importance is overlooked.     

Multislit-Based Emittance Measurement of Electron Beam from a Photocathode Radio-Frequency Gun

Measurement of emittance for a space-charge dominated electron beam from a photocathode rf gun is performed by employing the multislit-based method at Accelerator Laboratory of Tsinghua University. We present the design considerations on the multislit system and the experimental results, with special attention to the study of space charge induced emittance growth. The experimental results are in reasonable agreement with the PARMELA simulations.     

A method to measure the nonlinear force caused emittance growth in a RF photoinjector

Based on the multi-slit method, a new method is introduced to measure the non linear force caused emittance growth in a RF photoinjector. It is possible to reconstruct the phase space of a beam under some conditions by the multi-slit method. Based on the reconstructed phase space, besides the emittance, the emittance growth from the distortion of the phase space can also be measured. The emittance growth results from the effects of nonlinear force acting on electron, which is very important for the high quality beam in a RF photoinjector.     

Ultra-low emittance X-band photocathode RF gun

In this paper, we present the simulation results of a 1.6 cell X-band photocathode RF gun for ultra-low emittance electron beams. It will work at 9.3 GHz. The emittance, bunch length, electron energy and energy spread at the gun exit are optimized at bunch charge of 1pC using PARMELA. Electron bunches with emittance about 0.1 mm·mrad and bunch length less than 100 fs can be obtained from this gun. A PITZ type coupler is adopted in this gun and an initial simulation by MAFIA is also given in this paper.     

Ultra-low emittance X-band photocathode RF gun

In this paper, we present the simulation results of a 1.6 cell X-band photocathode RF gun for ultra-low emittance electron beams. It will work at 9.3 GHz. The emittance, bunch length, electron energy and energy spread at the gun exit are optimized at bunch charge of 1pC using PARMELA. Electron bunches with emittance about 0.1 mm·mrad and bunch length less than 100 fs can be obtained from this gun. A PITZ type coupler is adopted in this gun and an initial simulation by MAFIA is also given in this paper.     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source(LUCX) is a test bench for a compact high brightness X-ray generator,based on inverse Compton Scattering at KEK,which requires high intensity multi-bunch trains with low transverse emittance.A photocathode RF gun with emittance compensation solenoid is used as an electron source.Much endeavor has been made to increase the beam intensity in the multi-bunch trains.The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects,so that ...     

射频腔光阴极注入器发射度研究

 在激光驱动的光阴极注入器产生的高亮度电子束中，空间电荷引起发射度的增长。分析了射频腔中引起发射度增长的因素以及解决这个问题的办法——在射频腔的阴极附近加一个螺旋聚焦磁场进行补偿，也给出了补偿后电子束的发射度并和数值模拟结果进行比较，实验测试表明，所得结果比较符合。     

高压直流连续波光阴极注入器中发射度补偿

空间电荷效应是引起发射度增长的主要因素,特别是在高压直流连续波光阴极注入器中。分析了高压直流连续波光阴极注入器中线性空间电荷力的特点及其对电子束横向发射度的影响,并从理论上解析地研究了螺线管发射度补偿的原理及特点。最后利用Parmela程序对中国工程物理研究院高压直流连续波光阴极注入器的发射度补偿作了模拟计算。结果表明,束团电荷量为80 pC的电子束在350 keV高压直流电子枪出口处的横向归一化发射度为5.14 mmmrad,经过螺线管补偿后,其最小横向发射度变为1.27 mmmrad。电子束的发射度得到了很好的补偿。     

强流低发射度光阴极微波电子枪的优化设计

为了实现高增益 FEL,对其关键部件光阴极微波电子枪进行了优化设计 ,还就发射度补偿技术进行了较详细的考虑 ,并用 PARMELA程序进行了粒子动力学的模拟 ,初步给出了为降低初始电子束团横向发射度的优化参数。     

Simulation study on the emittance compensation of off-axis emitted beam in RF photoinjector

To make full use of the photocathode material and improve its quantum efficiency lifetime, it can be necessary to operate the laser away from the cathode center in photoinjectors. In RF guns, the off-axis emitted beam will see a time-dependent RF effect, which would generate a significant growth in transverse emittance. It has been demonstrated that such an emittance growth can be almost completely compensated by orienting the beam on a proper orbit in the downstream RF cavities along the injector [1]. In this paper we analyze in detail the simulation techniques used in reference [1] and the issues associated with them. The optimization of photoinjector systems involving off-axis beams is a challenging problem. To solve this problem, one needs advanced simulation tools including both genetic algorithms and an efficient algorithm for 3D space charge. In this paper, we report on simulation studies where the two codes ASTRA and IMPACT-T are used jointly to overcome these challenges, in order to optimize a system designed to compensate for the emittance growth in a beam emitted off axis.     

Space charge effect,coherence of charge oscillations,and emittance

The space charge effect plays an important role in accelerator injectors, in which the particle energy is relatively low. The emittance compensation technique makes it possible to effectively analyze and optimize such beamlines. This method is used for obtaining simple and reliable analytical and numerical estimates for the increase in emittance in beamlines with prevailing effect of space charge and guns. The longitudinal and transverse nonuniformity in charge density, acceleration, and bunching are taken into account. The parameters of optimal beamlines and guns are estimated.