Synthesis and characterization of phthalazinone‐based poly(aryl ether ketone) derived from 4,4′‐dichlorobenzophenone

As distinguished from the conventional preparation of poly(aryl ether ketone)s utilizing 4,4′‐difluorobenzophenone, a novel synthetic method of high molecular weight poly(phthalazinone ether ketone) derived from 4,4′‐dichlorobenzophenone was studied. Reaction conditions to get high molecular weight polymer were investigated in details. Experimentally, sulfolane was chosen as the reaction media and high molecular weight polymer could be obtained in 7–8 hr at 210°C. The cyclic oligomers in the polymer product reduced to below 3.0% when the concentration of the reactant is 1.6–1.7 g/ml. Fourier transform infrared (FT‐IR), ¹H NMR, and elemental analysis were used to confirm the structure of the obtained polymer. The amorphous polymer showed reasonable solubility in selective solvent, such as chloroform and N‐methyl‐2‐pyrrolidone, and tough, flexible, and transparent thin film can be readily prepared from their N‐methyl‐2‐pyrrolidone solution. The obtained polymer showed high glass transition temperature (T_g) up to 261°C detected by differential scanning calorimetry (DSC), and the temperature of 5% weight loss under nitrogen higher than 500°C detected by thermal gravimetric analysis (TGA), indicating its excellent thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

9,9‐Diaryl‐4,5‐diazafluorene‐based Cardo polymer; Synthesis and characteristic properties

To open out new aspects of 9,9‐diarylfluorene (DAF)‐based polymers with high performances, 9,9‐(4‐hydroxyphenyl)‐4,5‐diazafluorene ( N‐BPF ) was designed as a new cardo structure and the properties of poly(ether ketone)s ( N‐PEKs ) containing N‐BPF skeletons were examined in detail. N‐PEKs were synthesized in high yields via polycondensation of N‐BPF with difluoroarenes. N‐PEKs showed cardo polymer‐specific properties such as high thermal stability and high solubility in organic solvents. The addition of p‐toluenesulfonic acid (TsOH) to N‐PEK resulted in the formation of network polymer based on interchain hydrogen bonds. It turned out that the films of network polymer are flexible and transparent and exhibit high refractive index and low birefringence. The effects of feed ratio of TsOH to N‐PEK were also evaluated on the mechanical properties of network polymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4541–4549     

固相β-环糊精包结物诱导7-羟基-2-甲氧基-2-甲基色满的不对称合成

研究了室温下间苯二酚和甲基乙烯基酮分别与β-环糊精（ β-CD）形成包结物后的几种不同固相反应,结果表明包结物A（间苯二酚/β-CD）与包结物B（甲基乙烯基酮/β-CD）反应能够很好地得到目的产物,产率及ee值分别为82.8%和78.4%;间苯二酚与包结物B反应仅得到低光学活性产物（ee值为19.5%）;包结物A与甲基乙烯基酮反应却没有得到手性目的产物。以熔点、X-粉末衍射、固相核磁碳谱及ROESY多种方法对所形成的包结物进行了表征,包结物中主客体的比例（1：1）通过¹H NMR (400 MHz)得以确定,文章对固相环加成反应的机制也进行了初步探讨。     

(+)‐3,11‐Dioxoandrost‐4‐ene‐17β‐carboxyl­ic acid: catemeric hydrogen bonding in a steroidal keto acid

The title keto acid, C₂₀H₂₆O₄, forms carboxyl‐to‐ketone hydrogen‐bonding catemers [O?O = 2.653 (5) Å and O—H?O = 172 (5)°], linking translationally related mol­ecules via the A‐ring ketone. The two mol­ecules in the cell form two parallel counter‐directional chains, screw‐related in b. A total of four intermolecular C—H?O=C close contacts was found, involving both ketone functions.     

Photocurable and thermally stable polymers based on 1,4‐pentadien‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate: Copolymerization with ethyl acrylate

1,4‐Pentadien‐3‐one‐1,5‐bis(p‐hydroxyphenyl) (PBHP) was prepared by reacting p‐hydroxybenzaldehyde and acetone in the presence of an acid catalyst. 1,4‐Pentadiene‐3‐one‐1‐p‐hydroxyphenyl‐5‐p‐phenyl methacrylate (PHPPMA) monomer was prepared by reacting PBHP dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine. A free‐radical solution polymerization technique was used for synthesizing homo‐ and copolymers of different feed compositions of PHPPMA and ethyl acrylate (EA) in EMK as a solvent with benzoyl peroxide as a free‐radical initiator at 70 ± 1 °C. All the polymers were characterized with IR and ¹H NMR techniques. The compositions of the copolymers were determined with the ¹H NMR technique. The copolymer reactivity ratios were evolved with Kelen–Tudos (EA = 1.25 and PHPPMA = 0.09) and extended Kelen–Tudos (EA = 1.30 and PHPPMA = 0.09) methods. Q (0.48) and e (1.68) values for the new monomer (PHPPMA) were calculated with the Alfrey–Price method. UV absorption spectra for poly(PHPPMA) showed two absorption bands at 302 and 315 nm. The photocrosslinking properties of the polymer samples were examined with the solvent method. Thermal analyses of the polymers were performed with the thermogravimetric‐differential thermogravimetric technique. First, the decomposition temperatures started for poly(PHPPMA), copoly(EA‐PHPPMA) (62:38), and copoly(EA‐PHPPMA) (41:59) were at 350, 410, and 417 °C, respectively. A gel permeation chromatographic method was used for determining the polymer molecular weights (weight‐average molecular weight: 2.67 × 10⁴ and number‐average molecular weight: 1.41 × 10⁴) and polydispersity index (1.89). The solubility of the monomer and the copolymers occurred at 30 °C with solvents having different polarities. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1632–1640, 2003     

Ellipsometry study of the photo‐oxidation of poly[(2‐methoxy‐5‐hexyloxy)‐ p‐phenylenevinylene]

Poly(p‐phenylenevinylene) (PPV) and its derivatives exhibit strong luminescence, being serious candidates to be used as active layers in organic light‐emitting diodes. However, the structural degradation caused by photo‐oxidation is an obstacle for commercial applications of such materials. Here, we show that spectroscopy ellipsometry is a useful technique to investigate the photo‐oxidation of poly[(2‐methoxy‐5‐hexyloxy)‐p‐phenylenevinylene] (MH‐PPV), a PPV derivative, which emits a red color light. Spectroscopy ellipsometry enables determination of the complex dielectric function—?*(E)—of MH‐PPV thin‐layer films exposed to air, in the 2.1–4.2 eV energy range, as a function of the light exposure time (t_e). By using the Lorentz model to fit the experimental ?*(E) curves, it was inferred that the interactions among polymeric chains increase with t_e. From ?*(E), it is also possible to obtain the complex refractive index, N*(E) = n + ik. At higher energies (where k ? n), n increases from 1.32 to 1.40 with the photo‐oxidation progress. The behavior of n was investigated by using the Lorenz–Lorentz equation, taking into account the contribution for n by the chromophores of MH‐PPV. The effect of photo‐oxidation, mainly due to the replacement of vinyl C?C by the ketone C?O bonds, is confirmed by Fourier transform infrared measurements, an effect that reduces the average effective polymer conjugation length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1033–1041, 2004     

9α‐Fluoro‐16α‐methyl‐3,11‐dioxoandrosta‐1,4‐diene‐17β‐carboxyl­ic acid: catemeric hydrogen bonding and acetic acid solvation in a steroidal keto acid related to dexamethasone

The title keto acid crystallizes as a solvate, C₂₁H₂₅FO₄·C₂H₄O₂, with two mol­ecules each of steroid and acetic acid per asymmetric unit. The former are approximately parallel, with opposite end‐to‐end orientation, and form translational carboxyl‐to‐ketone hydrogen‐bonding catemers [O⋯O = 2.679 (6) and 2.650 (5) Å, and O—H⋯O = 165 and 162°] that involve the 3‐ketone group and follow the a axis. The acetic acid mol­ecules are paired by hydrogen bonding, and neither they nor the F atom nor the 11‐ketone group play any overt role in the hydrogen‐bonding scheme of the steroid. Intermolecular C—H⋯O=C close contacts involving three different neighboring mol­ecules exist to the 11‐ketone group, the steroidal carboxyl group and one of the acetic acid molecules.     

Analogues of α‐Campholenal (= (1R)‐2,2,3‐Trimethylcyclopent‐3‐ene‐1‐acetaldehyde) as Building Blocks for (+)‐β‐Necrodol (= (1S,3S)‐2,2,3‐Trimethyl‐4‐methylenecyclopentanemethanol) and Sandalwood‐like Alcohols

To complete our panorama in structure–activity relationships (SARs) of sandalwood‐like alcohols derived from analogues of α‐campholenal (= (1R)‐2,2,3‐trimethylcyclopent‐3‐ene‐1‐acetaldehyde), we isomerized the epoxy‐isopropyl‐apopinene (?)‐ 2d to the corresponding unreported α‐campholenal analogue (+)‐ 4d (Scheme 1). Derived from the known 3‐demethyl‐α‐campholenal (+)‐ 4a , we prepared the saturated analogue (+)‐ 5a by hydrogenation, while the heterocyclic aldehyde (+)‐ 5b was obtained via a Bayer‐Villiger reaction from the known methyl ketone (+)‐ 6 . Oxidative hydroboration of the known α‐campholenal acetal (?)‐ 8b allowed, after subsequent oxidation of alcohol (+)‐ 9b to ketone (+)‐ 10 , and appropriate alkyl Grignard reaction, access to the 3,4‐disubstituted analogues (+)‐ 4f,g following dehydration and deprotection. (Scheme 2). Epoxidation of either (+)‐ 4b or its methyl ketone (+)‐ 4h , afforded stereoselectively the trans‐epoxy derivatives 11a,b , while the minor cis‐stereoisomer (+)‐ 12a was isolated by chromatography (trans/cis of the epoxy moiety relative to the C₂ or C₃ side chain). Alternatively, the corresponding trans‐epoxy alcohol or acetate 13a,b was obtained either by reduction/esterification from trans‐epoxy aldehyde (+)‐ 11a or by stereoselective epoxidation of the α‐campholenol (+)‐ 15a or of its acetate (?)‐ 15b , respectively. Their cis‐analogues were prepared starting from (+)‐ 12a . Either (+)‐ 4h or (?)‐ 11b , was submitted to a Bayer‐Villiger oxidation to afford acetate (?)‐ 16a . Since isomerizations of (?)‐ 16 lead preferentially to β‐campholene isomers, we followed a known procedure for the isomerization of (?)‐epoxyverbenone (?)‐ 2e to the norcampholenal analogue (+)‐ 19a . Reduction and subsequent protection afforded the silyl ether (?)‐ 19c , which was stereoselectively hydroborated under oxidative condition to afford the secondary alcohol (+)‐ 20c . Further oxidation and epimerization furnished the trans‐ketone (?)‐ 17a , a known intermediate of either (+)‐β‐necrodol (= (+)‐(1S,3S)‐2,2,3‐trimethyl‐4‐methylenecyclopentanemethanol; 17c ) or (+)‐(Z)‐lancifolol (= (1S,3R,4Z)‐2,2,3‐trimethyl‐4‐(4‐methylpent‐3‐enylidene)cyclopentanemethanol). Finally, hydrogenation of (+)‐ 4b gave the saturated cis‐aldehyde (+)‐ 21 , readily reduced to its corresponding alcohol (+)‐ 22a . Similarly, hydrogenation of β‐campholenol (= 2,3,3‐trimethylcyclopent‐1‐ene‐1‐ethanol) gave access via the cis‐alcohol rac‐ 23a , to the cis‐aldehyde rac‐ 24 .     

One‐Pot Microwave‐Assisted Synthesis of Novel Substituted N‐Dichloroacetyl‐4,5‐dimethyl‐1,3‐oxazolidines

A one‐pot and efficient synthesis of substituted N‐dichloroacetyl‐4,5‐dimethyl‐1,3‐oxazolidines utilizing the reaction of alkamine with aldehyde or ketone in refluxing benzene under microwave irradiation was described. The N‐acylation was followed with dichloroacetyl chloride and NaOH acting as the attaching acid agent. All compounds were characterized by IR, ¹H NMR, ¹³C NMR, and element analysis. Additionally, the absolute configuration of 4a was determined by X‐ray crystallography. All the compounds were tested for their herbicide safeners activity of protecting the maize from the injury of acetochlor.     

Incorporation of ketone groups into poly(4‐hydroxystyrene)s main chain by radical copolymerization of 2,2‐diphenyl‐4‐methylene‐1,3‐dioxorane with O‐protected hydroxystyrenes and their photodegradable behavior

Here we report the incorporation of ketone groups into poly(4‐hydroxystyrene)s main chain by radical copolymerization of O‐protected hydroxystyrenes such as 4‐ethoxyethoxystyrene and 4‐acetoxystyrene with 2,2‐diphenyl‐4‐methylene‐1,3‐dioxorane (DPMD) followed by removal of the protective groups and the photodegradable behavior of obtained copolymers. The copolymerization of O‐protected hydroxystyrenes with DPMD gave the corresponding copolymers bearing DMPD‐derived ketone groups in the main chain, of which content could be controlled by changing monomer feed ratio. The ethoxyethyl and acetyl groups of the obtained copolymers were completely removed under acidic and basic conditions, respectively, to afford poly(4‐hydroxystyrene)s having ketone moieties in the main chain. The molecular weights of these copolymers decreased under photoirradiation due to the Norrish‐type reactions of the ketone groups distributed in the main chain. These results demonstrate that poly(4‐hydroxystyrene)s having ketone groups in the main chain possess good photo‐scissibility. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Alternative Synthesis of 2‐Hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one

The 2‐hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one ( 1 ) was synthesized in 42% yield by rearrangement of epoxy ketone 10 on treatment with BF₃⋅Et₂O under anhydrous conditions. Intermediate 10 was available from the known enone 8 , either via direct epoxidation (60% H₂O₂, NaOH, MeOH; yield 50%), or via reduction to the corresponding allylic alcohol 14 (LiAlH₄, THF), followed by epoxidation ([VO(acac)₂], ^tBuOOH) and reoxidation under Swern conditions, in 37% total yield.     

Regio‐ and stereoselective cyclopolymerization of 1,2 : 4,5‐dianhydro‐3‐O‐methyl‐xylitol leading to a novel polycarbohydrate of (2→5)‐1,4‐anhydro‐3‐O‐methyl‐pentitol

(2→5)‐1,4‐Anhydro‐3‐O‐methyl‐pentitol, which is a novel carbohydrate polymer without an anomeric linkage, was synthesized by cationic cyclopolymerization of 1,2 : 4,5‐dianhydro‐3‐O‐methyl‐xylitol. When BF₃·OEt₂ was used as the initiator, soluble polymers were obtained in 28 to 50% yield. These polymers have number‐average molecular weights of 1 150 to 2 340 corresponding to an average degree of polymerization of 8.8 to 18.0. It was confirmed by ¹³C NMR that the resulting polymer mainly consists of 1,4‐anhydro‐3‐O‐methyl‐D L ‐arabinitol units.     

A novel type of optically active helical polymers: Synthesis and characterization of poly(α,β‐unsaturated ketone)

New α,β‐unsaturated ketone monomers, menthyl vinyl ketone (MVK), and 1‐menthylbut‐3‐en‐2‐one (MBEK) were synthesized. The monomers were polymerized using butyllithium as an initiator. The polymer derived from MVK (poly‐MVK) had a tremendous specific optical rotation [α], which was as 32 times large as that of its monomer MVK. Poly‐MVK was confirmed to keep a prevailing helicity of backbone in solution by means of comparing the specific optical rotation and the CD spectra with that of MVK and the model compound such as ethyl menthyl ketone (EMK) and n‐hexyl menthyl ketone (n‐HMK). This conclusion was also confirmed by the fact that the specific optical rotation and the CD signal intensity of poly‐MBEK were not enough large due to backbone flexibility caused by the effective isolation of the main chain from the bulky menthyl. The excess value of one‐handed helicity of poly‐MVK decreased with the increase of polymerization temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1441–1448, 2010     

Hexahydrospiro‐pyrazolo[3,4‐b]pyridine‐4,1′‐pyrrolo[3,2,1‐ij]quinolines Derived from 5,6‐dihydro‐4H‐pyrrolo[3,2,1‐ij]quinoline‐1,2‐dione

The tricyclic isatin, 5,6‐dihydro‐4H‐pyrrolo[3,2,1‐ij]quinoline‐1,2‐dione ( 1 ), reacts with a combination of an aryl cyanomethyl ketone 8 and a 5‐amino‐1‐arylpyrazole 7 to generate spirocyclic products 9 .     

Cross‐Linked‐Polymer‐Supported N‐{2′‐[(Arylsulfonyl)amino][1,1′‐binaphthalen]‐2‐yl}prolinamide as Organocatalyst for the Direct Aldol Intermolecular Reaction under Solvent‐Free Conditions

A bottom‐up strategy was used for the synthesis of cross‐linked copolymers containing the organocatalyst N‐{(1R)‐2′‐{[(4‐ethylphenyl)sulfonyl]amino}[1,1′‐binaphthalen]‐2‐yl}‐D ‐prolinamide derived from 2 (Scheme 1). The polymer‐bound catalyst 5b containing 1% of divinylbenzene as cross‐linker showed higher catalyst activity in the aldol reaction between cyclohexanone and 4‐nitrobenzaldehyde than 5a and 5c . Remarkably, the reaction in the presence of 5b was carried out under solvent‐free, mild conditions, achieving up to 93% ee (Table 1). The polymer‐bound catalyst 5b was recovered by filtration and re‐used up to seven times without detrimental effects on the achieved diastereo‐ and enantioselectivities (Table 2). The catalytic procedure with polymer 5b was extended to the aldol reaction under solvent‐free conditions of other ketones, including functionalized ones, and different aromatic aldehydes (Table 3). In some cases, the addition of a small amount of H₂O was required to give the best results (up to 95% ee). Under these reaction conditions, the cross‐aldol reaction between aldehydes proceeded in moderate yield and diastereo‐ and enantioselectivity (Scheme 2).     

Synthesis and Structure of O,O‐Diethyl N‐[(trans‐4‐Aryl‐5,5‐dimethyl‐2‐oxido‐2λ5‐1,3,2‐dioxaphosphorinan‐2‐yl)methyl]phosphoramidothioates

A study on the synthesis of the novel N‐(cyclic phosphonate)‐substituted phosphoramidothioates, i.e., O,O‐diethyl N‐[(trans‐4‐aryl‐5,5‐dimethyl‐2‐oxido‐2λ⁵‐1,3,2‐dioxaphosphorinan‐2‐yl)methyl]phosphoramidothioates 4a – l , from O,O‐diethyl phosphoramidothioate ( 1 ), a benzaldehyde or ketone 2 , and a 1,3,2‐dioxaphosphorinane 2‐oxide 3 was carried out (Scheme 1 and Table 1). Some of their stereoisomers were isolated, and their structure was established. The presence of acetyl chloride was essential for this reaction and accelerated the process of intramolecular dehydration of intermediate 5 forming the corresponding Schiff base 7 (Scheme 2).     

4‐Ethynyl‐4‐hydroxycyclohexan‐1‐one and 4‐ethynyl‐4‐hydroxy‐2,3,5,6‐tetramethylcyclohexa‐2,5‐dien‐1‐one

The title compounds, C₈H₁₀O₂, (I), and C₁₂H₁₄O₂, (II), occurred as by‐products in the controlled synthesis of a series of bis­(gem‐alkynols), prepared as part of an extensive study of synthon formation in simple gem‐alkynol derivatives. The two 4‐(gem‐alkynol)‐1‐ones crystallize in space group P2₁/c, (I) with Z′ = 1 and (II) with Z′ = 2. Both structures are dominated by O—H?O=C hydrogen bonds, which form simple chains in the cyclo­hexane derivative, (I), and centrosymmetric dimers, of both symmetry‐independent mol­ecules, in the cyclo­hexa‐2,5‐diene, (II). These strong synthons are further stabilized by C[triple‐bond]C—H?O=C, C_methylene—H?O(H) and C_methyl—H?O(H) interactions. The direct intermolecular interactions between donors and acceptors in the gem‐alkynol group, which characterize the bis­(gem‐alkynol) analogues of (I) and (II), are not present in the ketone derivatives studied here.     

(+)‐3‐Oxo‐4‐pregnene‐20β‐carboxyl­ic acid: catemeric hydrogen bonding in a steroidal keto acid

The title keto acid, (+)‐23,24‐dinor‐3‐oxo­chol‐4‐en‐22‐oic acid, C₂₂H₃₂O₃, forms carboxyl‐to‐ketone hydrogen‐bonding catemers [O?O = 2.699 (4) Å and O—H?O = 173°], linking mol­ecules screw‐related in b. The four mol­ecules in the cell form two parallel counter‐directional chains, screw‐related in a. Intermolecular C—H?O=C close contacts to different neighboring mol­ecules were found for the ketone and the acid.     

Cationic photopolymerization of cis‐2,3‐tetramethylene‐1,4,6‐trioxaspiro[4,4]nonane

The spiro‐orthoester, cis‐2,3‐tetramethylene‐1,4,6‐trioxaspiro[4,4]nonane (cis‐TTN) ( I ), underwent rapid cationic photopolymerization when exposed to UV light using diphenyliodonium salts as a photoinitiator. The polymer, poly[(trans‐OCB)_x′‐(cis‐OCB)_x″‐(CHO)_y] thus formed consisted of poly(trans‐2‐oxycyclohexyl butanoate) (trans‐OCB)_x′ ( II ), poly(cis‐2‐oxycyclohexyl butanoate) (cis‐OCB)_x″ ( III ), and poly‐ (1,2‐cyclohexene oxide) (CHO)_y segments, and no expected pure poly(ether‐ester), that is, poly(2‐oxycyclohexyl butanoate), was isolated. The structure of the polymer was identified, and the mechanism of the reaction was deduced. The polymer thus formed exhibited expansion in volume during cationic photopolymerization when compared to that obtained by conventional cationic polymerization using a Lewis acid (e.g., BF₃OEt₂, CH₃OSO₂CF₃, or SnCl₄) as an initiator, which demonstrated volume shrinkage during polymerization. The volume expansion of the polymer during polymerization was due to (1) the lower content of the higher density (CHO)_y segment in the polymer chain and, more importantly, (2) the higher and optimal mole ratio of (trans‐OCB)_x′ and (cis‐OCB)_x″ segments that led the polymer in a more disordered, less dense, and higher volumetric state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3680–3690, 2009     

Synthesis of 2‐Substituted 2‐Amino Ketones by Rhodium‐Catalyzed Reaction of N‐Sulfonyl‐1,2,3‐triazoles with 2‐Alkenols

A study on a rhodium(II )‐catalyzed reaction of N‐sulfonyl‐1,2,3‐triazoles with 2‐alkenols is reported. The reaction is initiated by insertion of an α‐imino carbene into the O–H linkage of alcohol, forming a 2‐alkenoxy enamide intermediate. A thermal [3,3]‐sigmatropic rearrangement follows to yield 2‐substituted 2‐amino ketone in a stereoselective manner. The successful application of this methodology to a formal synthesis of (–)‐α‐conhydrine is also described.