A novel type of optically active helical polymers: Synthesis and characterization of poly(N‐propargylureas)

This article presents two novel artificial helical polymers, substituted polyacetylenes with urea groups in side chains. Poly( 4 ) and poly( 5 ) can be obtained in high yields (≥97%) and with moderate molecular weights (11,000–14,000). Poly( 4 ) contains chiral centers in side chains, and poly( 5 ) is an achiral polymer. Both of the two polymers adopted helical structures under certain conditions. More interestingly, poly( 4 ) exhibited large specific optical rotations, resulting from the predominant one‐handed screw sense. The helical conformation in poly( 5 ) was stable against heat, while poly( 4 ) underwent conformational transition from helix to random coil upon increasing temperature from 0 to 55 °C. Solvents had considerable influence on the stability of the helical conformation in poly( 4 ). The screw sense adopted by the helices was also largely affected by the nature of the solvent. Poly( 4 ‐co‐ 5 )s formed helical conformation and showed large optical rotations, following the Sergeants and Soldiers rule. By comparing the present two polymers (with one ? N? H groups) with the three polymers previously reported (with two ? N? H groups in side chains), the nature of the hydrogen bonds formed between the neighboring urea groups played big roles in the formation of stable helical conformation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4112–4121, 2008     

Structure of molten stereoregular polyolefins with different side‐chain sizes: Linear polyethylene,polypropylene, poly(1‐butene), and poly(4‐methyl‐1‐pentene)

The melt structures of linear polyethylene and the isotactic vinyl polymers polypropylene, poly(1‐butene), and poly(4‐methyl‐1‐pentene), along with the corresponding methyl, ethyl, and isobutyl side chains, were studied with wide‐angle X‐ray diffraction. As the size of the side branch increases from zero (polyethylene) to methyl, ethyl, and isobutyl, a prepeak appears below the main diffraction peak in the total structure factor. The prepeaks become stronger and shift to lower scattering vectors with increasing bulkiness of the side chain. There is a strong correlation between the position of the prepeaks in the melt and the average nearest‐neighbor helix–helix packing distance in the crystals, implying similar helical conformations in the melts. © 2000 John Wiley & Sons, Inc.* J Polym Sci B: Polym Phys 38: 2480–2485, 2000     

Doublet Chirality Transfer and Reversible Helical Transition in Poly(3,5‐disubstituted phenylacetylene)s with Pyrene as a Probe Unit†

A novel doublet chirality transfer (DCT) model was demonstrated in cis poly(3,5‐disubstituted phenylacetylene)s, i.e., S‐I , R‐I , and S‐I‐NMe . The chiral message from the stereocenter of alkylamide substituent at 3‐position induced the polyene backbone to take cis‐transoid helical conformation with a predominant screw sense. And in turn the helical backbone acted as a scaffold to orient the pyrene probes, which was linked to phenyl rings through 5‐position, to array in an asymmetric manner. A combinatory analyses of ¹H NMR, Raman, FTIR, UV‐vis absorption, CD, and computer simulation suggested that the main‐chain stereostructure, solvent nature, and intramolecular hydrogen bonds played important and complex roles on DCT. High cis‐structure content and intramolecular hydrogen bonds were beneficial for the realization of DCT. Reversible helix‐helix transition was observed in S‐I by changing the nature of solvents. In DMF, S‐I adopted a relatively contracted helix, where the main chain exhibited strong optical activity, but that of pyrene was weak. In contrast, a relatively stretched helix formed in CHCl₃, in which the optical activity of pyrene was much larger, whereas that of the polyene backbone was the weakest. This helix‐helix transition was attributed to the intramolecular hydrogen bonds, which was confirmed by solution‐state FTIR spectra and computer calculations.     

Asymmetric polymerization of methacrylates

The syntheses of optically active polymers having helical conformation from bulky methacrylates are reviewed focusing on selected topics. The monomers include triphenylmethyl methacrylate and its analogues. Asymmetric anionic polymerization of the monomers gives isotactic, optically active polymers having a helical structure with excess helicity. The isotactic content and the extent of helical‐sense excess depend on the monomer structure and the reaction conditions. In the case of methacrylates, completely isotactic and single‐handed helical polymers can be produced by asymmetric anionic polymerization (helix‐sense‐selective polymerization). Asymmetric radical polymerization is also possible for this class of monomer. Some of the helical polymers show chiral recognition ability toward a wide range of racemic compounds. Polymers having main‐chain configurational chirality are also discussed.     

On the Helical Motif of the Complexes Created by Association of Helix‐Forming Schizophyllan (SPG) and Helix‐Forming Polythiophene Derivatives

π‐Conjugated polymers can finely tune their electrical and optical properties in response to their conformational changes. We believe that a deeper understanding of their higher‐order structures will stimulate further development of their applications. We had revealed that one helix‐forming natural polysaccharide (SPG) and one polythiophene derivative (PT‐1) formed a stable one‐dimensional complex and in the polythiophene main chain a helical conformation was induced through the dynamic conformational changes. The objective of our present research is to obtain a better mechanistic understanding on the interaction between SPG and polythiophenes. Here we have used particular left‐ and right‐handed helix‐forming polythiophene derivatives (D ‐ and L ‐POWTs, respectively) and studied their influence on the helical motif of the complexes. We observed that SPG interacts with both D ‐ and L ‐POWTs through their dynamic conformational changes and both D ‐ and L ‐POWTs form the right‐handed co‐helical complexes with SPG according to the inherent helical motif of SPG. In addition, it was confirmed that 1) the complexes do not coagulate in aqueous solution, and 2) the exchange in the helical motif can occur only when the polymers experience the denature–renature process. We believe, therefore, that the mechanism of the helical induction of the SPG/POWT complexes is very unique, being different from conventional equilibrium reactions.     

The meso Helix: Symmetry and Symmetry‐Breaking in Dynamic Oligourea Foldamers with Reversible Hydrogen‐Bond Polarity

Oligoureas (up to n=6) of meso cyclohexane‐1,2‐diamine were synthesized by chain extension with an enzymatically desymmetrized monomer 2 . Despite being achiral, the meso oligomers adopt chiral canonical 2.5‐helical conformations, the equally populated enantiomeric screw‐sense conformers of which are in slow exchange on the NMR timescale, with a barrier to screw‐sense inversion of about 70 kJ mol^?1. Screw‐sense inversion in these helical foldamers is coupled with cyclohexane ring‐flipping, and results in a reversal of the directionality of the hydrogen bonding in the helix. The termini of the meso oligomers are enantiotopic, and desymmetrized analogues of the oligoureas with differentially and enantioselectively protected termini display moderate screw‐sense preferences. A screw‐sense preference may furthermore be induced in the achiral, meso oligoureas by formation of a 1:1 hydrogen‐bonded complex with the carboxylate anion of Boc‐d ‐proline. The meso oligoureas are the first examples of hydrogen‐bonded foldamers with reversible hydrogen‐bond directionality.     

Trismaleimide Dendrimers: Helix‐to‐Superhelix Supramolecular Transition Accompanied by White‐Light Emission

Reported here are unprecedented fluorescent superhelices composed of primary, supramolecular polymers of the opposite helical twist. A new class of functional dendrimers was synthesized by amino‐ene click reactions, and they demonstrate an alternating OFF/ON fluorescence with generation growth. A peripherally alkyl‐modified dendrimer displays helix‐sense‐selective supramolecular polymerization, which predominantly forms right‐handed (or left‐handed) helical supramolecular polymers in the solution containing chiral solvents. With increasing the concentration, these primary helical supramolecular polymers spontaneously twist around themselves in the opposite direction to form superhelical structures. Atomic force microscopy and circular dichroism measurements were used to directly observe the helix‐to‐superhelix transition occurring with a reversal in the helical direction. Exceptional white‐light emission was observed during superhelix formation.     

alpha and piDL helical states of alternating poly(gamma-benzyl D-L-glutamate) in solution.

As in solid state, strictly alternating poly(gamma-benzyl D-L-glutamate) in solution can adopt two different helical conformations. Besides the alpha helix, a second helical conformation is found at higher temperatures in dioxane and chloroform, the properties of which correspond to that of the piDL4 helix. As the molecules have a finite length a screw sense is favored for both helical forms thus giving rise to optical activity allowing the study of the transconformation by optical rotatory dispersion and circular dichroism besides infrared and dielectric measurements. Thus, as the temperature is raised the equilibria right-left handed alpha helices and alpha-piDL helical forms can be followed. The favored screw senses are determined by the number of interacting side chains for the alpha helix and by the number of hydrogen bonds which are formed in the piDL helical conformation. The side chain-side chain interactions in the alpha helix are experimentally shown to be attractive.     

Amylose‐grafted Curdlan: A New Class of Semi‐artificial Branched Polysaccharides for Hierarchical Polymeric Superstructures Created by the Action of “Orthogonal” Binding Sites

The semi‐artificial branched‐polysaccharides, amylose‐grafted curdlans, were synthesized utilizing an enzymatic polymerization. Both a curdlan main chain and amylose side chains on the polysaccharides maintain the original helical structure as well as the molecular binding ability. Thanks to the difference in their molecular recognition properties between β‐1,3‐glucan chain and α‐1,4‐glucan chain, the amylose‐grafted curdlans can provide two different orthogonal binding sites within one polymeric system. When a water‐soluble polythiophene was mixed with the amylose‐grafted curdlan, the polythiophene was twisted in two different modes and therein, fluorescence energy of the polythiophene wrapped by the amylose side chains was successfully transferred to the polythiophene wrapped by the curdlan main chain. We thus concluded that in the dendritic superstructure of this polysaccharide, a self‐organized “Janus‐type FRET system” was successfully constructed.     

Chiral oxazoline substituted optically active poly(m‐phenylene)s: Synthesis and coupling polymerizations of (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl) oxazoline using transition metal catalysts

Optically active poly(m‐phenylene)s substituted with chiral oxazoline derivatives have been synthesized by the nickel‐catalyzed Yamamoto coupling reaction of optically active (S)‐4‐benzyl‐2‐(3,5‐dihalidephenyl)oxazoline derivatives (X = Br or I). The structures and chiroptical properties of the polymers were characterized by spectroscopic methods and thermal gravimetric analyses. The polymers showed higher absolute optical specific rotation values than their corresponding monomer, and showed a Cotton effect at transition region of conjugated main chain. The optical activities of the polymers should be attributed to the higher order structure such as helical conformations. Moreover, the helical conformation could be induced by addition of metal salts into polymer solutions. The polymers showed good thermal stabilities, which was attributable to the oxazoline side chains. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ambidextrous α,γ‐Hybrid Peptide Foldamers

Molecular chirality is ubiquitous in nature. The natural biopolymers, proteins and DNA, preferred a right‐handed helical bias due to the inherent stereochemistry of the monomer building blocks. Here, we are reporting a rare co‐existence of left‐ and right‐handed helical conformations and helix‐terminating property at the C‐terminus within a single molecule of α,γ‐hybrid peptide foldamers composed of achiral Aib (α‐aminoisobutyric acid) and 3,3‐dimethyl‐substituted γ‐amino acid (Adb; 4‐amino‐3,3‐dimethylbutanoic acid). At the molecular level, the left‐ and right‐handed helical screw sense of α,γ‐hybrid peptides are representing a macroscopic tendril perversion. The pronounced helix‐terminating behaviour of C‐terminal Adb residues was further explored to design helix–Schellman loop mimetics and to study their conformations in solution and single crystals. The stereochemical constraints of dialkyl substitutions on γ‐amino acids showed a marked impact on the folding behaviour of α,γ‐hybrid peptides.     

Synthesis and Helical Structure of Poly(1‐methylpropargyl ester)s with Various Side Chains

Optically active 1‐methylpropargyl esters bearing various substituents were polymerized with [(nbd)Rh]⁺[η⁶‐C₆H₅B(C₆H₅)₃]^? (nbd=norbornadiene) as a catalyst to afford the corresponding poly(1‐methylpropargyl ester)s with moderate molecular weights in good yields. The polymers have a cis‐stereoregular structure, which was determined by ¹H NMR spectroscopy. Large optical rotations and clear CD signals demonstrated that all these polymers take on a helical structure with a predominantly one‐handed screw sense. The polymers exhibited large viscosity indices in the range 1.14–1.75. Chiral amplification was observed in R/S copolymerization. Conformational analysis revealed that the polymers form a tightly twisted helical structure with a dihedral angle of 70° at the single bond of the main chain.     

Design and synthesis of semiflexible substituted polyacetylenes with helical conformation

In this review article, we summarize our recent efforts on the design and synthesis of helical polymers from propiolic esters. Stereoregular cis-transoidal poly(propiolic esters) prepared with Rh catalysts have proven to possess semiflexible main chain, which drives the main chain to the helical conformation with long persistence length. Based on the chiroptical properties of poly(propiolic esters) bearing various chiral pendants, we established the design strategy for the production of well-ordered helical poly(propiolic esters). NMR study of various poly(propiolic esters) enabled estimation of not only the activation energy of helix reversal, but also the free energy difference between the helical and disordered states. The helix sense of poly(propiolic esters) is determined by the configuration of the chiral center, structure of the pendant groups, temperature, and solvent.     

Foldamer‐Mediated Remote Stereocontrol: >1,60 Asymmetric Induction

An N‐terminal L ‐α‐methylvaline dimer induces complete conformational control over the screw sense of an otherwise achiral helical peptide foldamer formed from the achiral quaternary amino acids Aib and Ac₆c. The persistent right‐handed screw‐sense preference of the helix enables remote reactive sites to fall under the influence of the terminal chiral residues, and permits diastereoselective reactions such as alkene hydrogenation or iminium ion addition to take place with 1,16‐, 1,31‐, 1,46‐ and even 1,61‐asymmetric induction. Stereochemical information may be communicated in this way over distances of up to 4 nm.     

Oxime Side‐Chain Cross‐Links in an α‐Helical Coiled‐Coil Protein: Structure,Thermodynamics, and Folding‐Templated Synthesis of Bicyclic Species

Covalent side‐chain cross‐links are a versatile method to control peptide folding, particularly when α‐helical secondary structure is the target. Here, we examine the application of oxime bridges, formed by the chemoselective reaction between aminooxy and aldehyde side chains, for the stabilization of a helical peptide involved in a protein–protein complex. A series of sequence variants of the dimeric coiled coil GCN4‐p1 bearing oxime bridges at solvent‐exposed positions were prepared and biophysically characterized. Triggered unmasking of a side‐chain aldehyde in situ and subsequent cyclization proceed rapidly and cleanly at pH 7 in the folded protein complex. Comparison of folding thermodynamics among a series of different oxime bridges show that the cross links are consistently stabilizing to the coiled coil, with the extent of stabilization sensitive to the exact size and structure of the macrocycle. X‐ray crystallographic analysis of a coiled coil with the best cross link in place and a second structure of its linear precursor show how the bridge is accommodated into an α‐helix. Preparation of a bicyclic oligomer by simultaneous formation of two linkages in situ demonstrates the potential use of triggered oxime formation to both trap and stabilize a particular peptide folded conformation in the bound state.     

Molecular Spring‐like Triple‐Helix Coordination Polymers as Dual‐Stress and Thermally Responsive Crystalline Metal–Organic Materials

Elastic metal–organic materials (MOMs) capable of multiple stimuli‐responsiveness based on dual‐stress and thermally responsive triple‐helix coordination polymers are presented. The strong metal‐coordination linkage and the flexibility of organic linkers in these MOMs, rather than the 4 Å stacking interactions observed in organic crystals, causes the helical chain to act like a molecular spring and thus accounts for their macroscopic elasticity. The thermosalient effect of elastic MOMs is reported for the first time. Crystal structure analyses at different temperatures reveal that this thermoresponsiveness is achieved by adaptive regulation of the triple‐helix chains by fine‐tuning the opening angle of flexible V‐shaped organic linkers and rotation of its lateral conjugated groups to resist possible expansion, thus demonstrating the vital role of adaptive reorganization of triple‐helix metal–organic chains as a molecular spring‐like motif in crystal jumping.     

Conformational properties and dynamics of molecular bottle‐brushes: A cellular‐automaton‐based simulation

Extensive computer simulation was performed using the bond‐fluctuation model and cellular‐automaton (CA)‐based simulation technique to probe the equilibrium structure and dynamical behavior of comb‐branched polymers in which the flexible side chains of a given length are placed regularly along the backbone and the number of branches increases linearly with total molecular weight. By applying very efficient CA algorithm – the “lattice molecular dynamics” (LMD) method – we have been able to study the properties of sufficiently large structures (up to 5880 monomeric units). Depending on the length of main and side chains as well as on interbranch spacing, we have calculated mean chain dimensions, local fractal dimensionalities, particle scattering functions, time autocorrelation functions, etc. The following main conclusions may be drawn from the results presented in our study: (i) The critical exponent, governing the mean size of the main chain, remains unchanged from its value known for a 3d self‐avoiding walk (SAW). On the other hand, two‐dimensional branched macromolecules with one‐sided branches are effectively in a collapsed state even under conditions of a good solvent, forming specific helical superstructures. (ii) Comparison of the simulated data with the predictions of the scaling model indicates that the latter is valid in describing the mean dimensions of the backbone as a function of side‐chain length and interbranch spacing. (iii) The excluded volume interaction between side chains dramatically slows down the relaxation of the backbone chain.     

Synthesis and photoisomerization of poly(1‐methylpropargyl ester)s carrying azobenzene moieties

Optically active 1‐methylpropargyl esters bearing azobenzene groups, namely, (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐butyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 1 ), (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐hexyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 2 ), and (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐octyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 3 ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?(C₆H₅)₃] (nbd, norbornadiene) as a catalyst to afford the corresponding poly(1‐methyloropargyl ester)s with moderate molecular weights (M_n = 24,000–31,300) in good yields (79–84%). Polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMSO, whereas insoluble in diethyl ether, n‐hexane, and methanol. Large optical rotations and strong CD signals demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense. The helical structure of the polymers changed with the addition of MeOH and heat. The trans‐azobenzene of the polymer side chains isomerized into cis on UV irradiation, which was accompanied with drastic helical conformational changes of the polymer backbone. The cis‐azobenzene moiety reisomerized into trans on visible‐light irradiation, which induced the recovery of chiral geometry of azobenzene moieties in the side chain. Conformational analysis revealed that the polymers form a tightly twisted right‐handed helical structure with a dihedral angle of 70° at the single bond of the main chain. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4749–4761, 2009     

Cooperative C-F...Si interaction in optically active helical polysilanes

Cooperative amplification of the C-F...Si weak interaction between side chains and the main chain was found to afford rigid rodlike helical polysilanes with a preferential screw sense.     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007