First-principles study of arsenic impurity clusters in molecular beam epitaxy (MBE) grown HgCdTe

The understanding of the microstructures of the arsenic tetramer , dimer , and singlet of HgCdTe is important to explain the high electrical compensation of molecular beam epitaxy (MBE) samples and the conversion to p-type behavior. The stable configurations were obtained from the first-principles calculations for the arsenic cluster defects [ (n=1, 2, and 4)] in as-grown HgCdTe. According to the defect formation energies calculated under Te-rich conditions, the most probable configurations of , , and have been established. For the optimized and the energy is favorable to combine in a nearest neighboring mercury vacancy , and the corresponding configurations can be used to explain the self-compensated n-type characteristics in as-grown materials. is likely to be more abundant than in as-grown materials, but arsenic atoms are more strongly bounded in than in , thus more substantial activation energy is needed for than that for . The atomic relaxations as well as the structural stability of the arsenic defects have also been investigated.     

First CRDS-measurements of water vapour continuum in the 940 nm absorption band

Measurements of near-infrared water vapour continuum using continuous wave cavity ring down spectroscopy (cw-CRDS) have been performed at around 10611.6 and . The continuum absorption coefficients for N₂-broadening have been determined to be and at , and and at , respectively.These results represent the first near-IR continuum laboratory data determined within the complex spectral environment in the 940 nm water vapour band and are in reasonable agreement with simulations using the semiempirical CKD formulation.     

Near-infrared diode laser spectroscopy of the HCSi radical

The , , and band spectra of HCSi radical were investigated by means of near-infrared diode laser spectroscopy to determine precise molecular constants for the and states. The detailed analysis of the rotationally resolved band spectra, studied for the first time in the present investigation, leads to the precise determination of molecular constants for the state associated with the Renner-Teller interaction. We obtained −0.15126663(53) and 495.00698(30) cm⁻¹ as the Renner-Teller parameter ε and the bending vibrational frequency ω₂, respectively. Based on the molecular constants for the and states, the rotational levels of the state were analyzed to obtain molecular constants and information on upper state perturbations. Using the available spectroscopic data, valence force fields for both the and states were estimated to aid in understanding the vibrational energy levels of the HCSi radical.     

Direct nanosecond Nd→Ce nonradiative energy transfer in cerium trifluoride laser crystals

Using third harmonics of LiF:F₂⁺ tunable color center laser excitation and selective fluorescence detection the temperature and concentration dependencies of fluorescence decay curves of the high-lying manifold of the Nd³⁺ ion were measured in CeF₃ crystals. As a result the temperature dependence of energy transfer kinetics from the manifold of the Nd³⁺ donor ions to the manifold of the acceptor Ce³⁺ ions in the ordered practically 100% filled crystal lattice was determined for 13-. Based on the temperature dependence the mechanisms and the channels of the Nd→Ce nonradiative energy transfer have been recognized. The net growth of the resonance Nd→Ce energy transfer rate in the temperature range from 25 to is found to be almost 3 orders of magnitude from 9.0×10⁴ to .In a crystal a significant contribution of the Nd→Nd resonance energy transfer to the manifold quenching is found for 20- and its channel and mechanism are suggested.Discussion of the possibility of subpicosecond and picosecond nonradiative energy transfer in rare-earth doped laser crystals is provided.     

A comparative study of the adsorption equilibrium of progesterone by a carbon black and a commercial activated carbon

In this paper the adsorption process of a natural steroid hormone (progesterone) by a carbon black and a commercial activated carbon has been studied. The corresponding equilibrium isotherms have been analyzed according to a previously proposed model which establishes a kinetic law satisfactorily fitting the C versus t isotherms. The analysis of the experimental data points out the existence of two well-defined sections in the equilibrium isotherms. A general equation including these two processes has been proposed, the global adsorption process being fitted to such equation. From the values of the kinetic equilibrium constant so obtained, values of standard average adsorption enthalpy () and entropy () have been calculated. Finally, information related to variations of differential adsorption enthalpy () and entropy () with the surface coverage fraction (θ) was obtained by using the corresponding Clausius-Clapeyron equations.     

MRCI studies on the electronic structure of AlN and AlN, and the electron affinity of AlN

Using multireference configuration-interaction methods and double to triple-zeta basis sets with semidiffuse and polarization functions, potential energies and spectroscopic constants for low-lying doublet, and quartet states of AlN⁻ were calculated. has R_e=3.280 bohr and . lies 0.17 eV above the ground state. Using an estimated electron affinity of 2.1 eV for AlN, four states of AlN⁻ are found to be stable, namely , , , and . Comparisons with the isovalent anions BN⁻ (three stable states) and AlP⁻ (seven stable states) are made. Photo-detachment of an electron from the state of AlN⁻ can lead to an accurate determination of the energy difference between the two close-lying lowest states of AlN, and , predicted here to be 0.09 eV apart.     

Adsorption characteristics of atomic nitrogen on ruthenium surfaces

We have studied the adsorption, vibration, and diffusion of N atoms on Ru(0 0 0 1), , and surfaces by means of the 5-parameter Morse potential (5-MP) of interaction between atomic nitrogen and a metal surface. The adsorption sites, adsorption geometry, binding energy and eigenvibration of atomic nitrogen on the different ruthenium surfaces are calculated. It is shown that atomic nitrogen always preferably occupies the high coordination sites on Ru surfaces. The 4-fold site is the preferable adsorption site for atomic nitrogen on both open and surfaces while 3-fold site is the most stable adsorption site for atomic nitrogen on both Ru(0 0 0 1) and surfaces. Moreover, we find the lowest energy pathway of diffusion and diffusion barriers of atomic nitrogen on the surfaces.     

Identification of a rotator phase of octamethyl ferrocene and correlations between its structural and dynamical properties

The low- and high-temperature phases of octamethyl ferrocene were studied in detail, using high-resolution X-ray powder diffraction, differential scanning calorimetry and nuclear resonant scattering, in particular the novel technique of synchrotron radiation perturbed angular correlations (SRPAC). Much as in the case of an analogous but more unsymmetrical molecule, octamethyl ethinyl ferrocene, the high-temperature phase possesses the space group with lattice parameters , , which in the rhombohedral setting correspond to , α=104.79^°. An increase of the volume per formula unit of about 12% across the phase transition is observed.The rotation of the electric field gradient, which can be identified with the rotation of the entire molecule within the lattice, follows Arrhenius behaviour with a high activation energy of . Whereas precursor effects and a change in activation energy were observed for octamethyl ethinyl ferrocene, no such effects are observed for octamethyl ferrocene. We relate this difference to the absence of the ethinyl substituent in octamethyl ferrocene.     

Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

Single crystal EPR studies of Mn(II) doped zinc sodium sulphate hexahydrate: a case of interstitial substitution

Single crystal Electron Paramagnetic Resonance studies on Mn(II) doped zinc sodium sulphate hexahydrate are carried out at room temperature. The angular variation spectra of the crystal in the three orthogonal planes show that the paramagnetic impurity Mn(II) has entered the host lattice interstitially. The spin Hamiltonian parameters calculated are: g_xx=1.899, g_yy=1.944, g_zz=2.024; and The probable location for the interstitial site has been identified from the position of various atoms in the lattice. The variable temperature study for polycrystalline sample has been carried out, which indicates no phase transition. The percentage covalency of Mn-O bond has been estimated to be 8.5%.