Studies on growth and characterization of ternary CdS1−xSex alloy thin films deposited by chemical bath deposition technique

Ternary alloyed CdS_1−xSe_x thin films of variable composition ‘x’ were grown by the simple and economical chemical bath deposition technique. The as-grown thin films were characterized for structural, compositional, surface morphological, optical and electrical studies. The X-ray diffraction (XRD) patterns of the sample indicated that all the samples were polycrystalline in nature with hexagonal structure. Scanning electron microscopy (SEM) micrographs showed uniform morphology with spherical shaped grains distributed over entire glass substrate. EDAX studies confirmed that the CdS_1−xSe_x films were having approximately same stoichiometry initially as well as finally. Room temperature optical measurements showed that band gap engineering could be realized in CdS_1−xSe_x thin films via modulation in composition ‘x’. Electrical resistivity of CdS_1−xSe_x thin films for various compositions was found to be low. The broad and fine tunable band gap properties of ternary CdS_1−xSe_x thin films have potential applications in opto-electronic devices.     

Doping and temperature dependence of inversion symmetry breaking in La2−xSrxCuO4

The doping dependence of the Raman spectra of high quality La_2−xSr_xCu^16,18O₄ polycrystalline compounds has been investigated at low temperatures. It is shown that symmetry forbidden bands peaked at ∼150 cm⁻¹, ∼280 cm⁻¹, and ∼370 cm⁻¹ are activated in the (xx/yy) polarization Raman spectra due to the local breaking of the inversion symmetry mainly at low temperatures and for doping concentrations for which the compound is superconducting. The apparent A₁-character of the activated modes in the symmetry reduced phase indicates a reduction from the D_2h to C_2v or D₂ crystal symmetries, which associates the observed modes to specific IR-active phonons with eigenvectors mainly along the c-axis. The temperature and doping dependence of this inversion symmetry breaking and the superconducting transition temperature are very similar, though the symmetry reduction occurs at significantly higher temperatures.     

Confined acoustic modes and spectral determination of network connectivity: Raman signatures of nanometric structure in g-GexSe1−x

Low-temperature Raman scattering results are presented on three glass compositions of Ge_xSe_1−x (15, 20, and 27 At. Ge%), and conciled with their reported structural data. The acoustic range is marked by the absence of Boson peak, and features discrete modes corresponding to nanometric dynamic aggregates. First sharp diffraction peak (FSDP) in structure factor S(k), due to Ge-Ge correlations brought about by shared Ge[Se_1/2]₄ tetrahedra medium-range structures, signifies 3D networking of Se-chains. A measure of volume-fraction of these entities determined from the FSDP area, and their number density ρ_MRS∝(k³Area)_FSDP is found to relate directly to the network connectivity, defined from optical Raman spectra in terms of the degree of cross-linking of Se-chains.     

Irreversible effects in LaGa1−xMnxO3

Quasi-irreversible increase in the electrical conductivity is observed in single crystals of LaGa_1−xMn_xO₃. The effect lasts for long time at room temperature and can be erased by heating of the crystal above the phase transition temperature. We explain the observed effects in terms of ionization and local lattice distortion processes.     

Preparation of (CdO)1−x(PbO)x and (CdS)1−x(PbS)x thin films by spray pyrolysis technique and their characterization

Mixed thin films of (CdO)_1−x(PbO)_x and (CdS)_1−x(PbS)_x (x=0.25) were prepared on glass substrates by spray pyrolysis technique for various substrate temperatures 300, 320 and 340 °C. Structural and optical properties were studied. XRD studies reveal the formation of mixed films. The substrate temperature of 340 °C seems to be critical for the formation of CdO-PbO mixed films. It is observed that (CdS)_1−x(PbS)_x mixed films were formed at all the three substrate temperatures. The direct band gap value of (CdO)_1−x(PbO)_x and (CdS)_1−x(PbS)_x mixed films is about 2.6 and 2.37 eV, respectively.     

Stress induced preferred orientation and phase transition for ternary WCxNy thin films

We deposit ternary WC_xN_y thin films on Si (1 0 0) substrates at 500 °C using direct current (DC) reactive magnetron sputtering in a mixture of CH₄/N₂/Ar discharge, and explore the effects of substrate bias (V_b) on the intrinsic stress, preferred orientation and phase transition for the obtained films by virtue of X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and selective area electron diffraction (SAED). We find that with increasing the absolute value of V_b up to 200 V the carbon (x) and nitrogen (y) atom concentrations of WC_xN_y films keep almost constant with the values of 0.75 and 0.25, respectively. The XPS and SAED results, combined with the density-functional theory (DFT) calculations on the electronic structure of WC_0.75N_0.25, show our obtained WC_xN_y films are single-phase of carbonitrides. Furthermore, we find that the compressive stress sharply increases with increasing the absolute value of V_b, which leads to a pronounced change in the preferred orientation and phase structure for the film, in which a phase transition from cubic β-WC_xN_y to hexagonal α-WC_xN_y occurs as V_b is in the range of −40 to −120 V. In order to reveal the relationship between the stress and phase transition as well as preferred orientation, the DFT calculations are used to obtain the elastic constants for β-WC_xN_y and α-WC_xN_y. The calculated results show that the preferred orientation is dependent on the competition between strain energy and surface energy, and the phase transition can be attributed to a decrease in the strain energy.     

Urbach rule and disordering processes in Cu6P(S1−xSex)5Br1−yIy superionic conductors

Compositional behavior of Urbach absorption edge is studied as well as the effect of compositional disordering on the parameters of exciton-phonon interaction, phase transition temperatures and electric conductivity in Cu₆P(S_1−xSe_x)₅Br_1−yI_y superionic solid solutions. The effect of different types of disordering on the optical absorption processes and specific features of compositional changes in the absorption edge spectra under S→Se and Br→I anion substitution in the mixed crystals are investigated. (x, T) phase diagrams for Cu₆P(S_1−xSe_x)₅X (X=I, Br) solid solutions are studied.     

Structural and magnetic properties of Cr1+x(Se1−yTey)2 compounds

The structural and magnetic properties of Cr_1+x(Se_1−yTe_y)₂ having a NiAs structure has been studied for (1+x)=1.27, 1.32 and 1.36 and y=0.75 by means of the Korringa-Kohn-Rostoker (KKR) band structure method. The sub-stoichiometry and the disorder on the chalcogenide sub-lattice has been treated by means of the coherent potential approximation (CPA) alloy theory. From total energy calculations a preferential site occupation on the Cr sub-lattice was found together with an antiparallel alignment of the magnetic moments on the two inequivalent Cr layers. The magnetic properties at finite temperature has been studied by means of Monte Carlo simulations on the basis of a classical Heisenberg Hamiltonian and the exchange coupling parameters calculated from first principles. This approach allowed to determine the critical temperature in good agreement with experiment.     

Structural and optical properties of a-Si1−xCx:H films synthesized by dc magnetron sputtering technique

Hydrogenated amorphous SiC films (a-Si_1−xC_x:H) were prepared by dc magnetron sputtering technique on p-type Si(1 0 0) and corning 9075 substrates at low temperature, by using 32 sprigs of silicon carbide (6H-SiC). The deposited a-Si_1−xC_x:H film was realized under a mixture of argon and hydrogen gases. The a-Si_1−xC_x:H films have been investigated by scanning electronic microscopy equipped with an EDS system (SEM-EDS), X-ray diffraction (XRD), secondary ions mass spectrometry (SIMS), Fourier transform infrared spectroscopy (FTIR), UV-vis-IR spectrophotometry, and photoluminescence (PL). XRD results showed that the deposited film was amorphous with a structure as a-Si_0.80C_0.20:H corresponding to 20 at.% carbon. The photoluminescence response of the samples was observed in the visible range at room temperature with two peaks centred at 463 nm (2.68 eV) and 542 nm (2.29 eV). In addition, the dependence of photoluminescence behaviour on film thickness for a certain carbon composition in hydrogenated amorphous SiC films (a-Si_1−xC_x:H) has been investigated.     

Bulk Sn1−xMnxO2 magnetic semiconductors without room-temperature ferromagnetism

Polycrystalline Sn_1−xMn_xO₂ (0≤x≤0.05) diluted magnetic semiconductors were prepared by solid-state reaction method and their structural and magnetic properties had been investigated systematically. The three Mn-doped samples (x=0.01, 0.03, 0.05) undergo paramagnetic to ferromagnetic phase transitions upon cooling, but their Curie temperatures are far lower than room temperature. The magnetization cannot be attributed to any identified impurity phase. It is also found that the magnetization increases with increasing Mn doping, while the ratio of the Mn ions contributing to ferromagnetic ordering to the total Mn ions decreases.     

Theoretical investigation of the conduction and valence band offsets of GaAs1−x Nx/GaAs1−yNy heterointerfaces

Theoretical investigations of the conduction band offset (CBO) and valence band offset (VBO) of the relaxed and pseudo-morphically strained GaAs_1−xN_x/GaAs_1−yN_y heterointerfaces at various nitrogen concentrations (x and y) within the range 0-0.05 and along the [0 0 1] direction are performed by means of the model-solid theory combined with the empirical pseudopotential method under the virtual crystal approximation that takes into account the effects of the compositional disorder. It has been found that for y < x, the CBO and VBO have negative and positive signs, respectively, whereas the reverse is seen when y > x. The band gap of the GaAs_1−xN_x over layer falls completely inside the band gap of the substrate GaAs_1−yN_y and thus the alignment is of type I (straddling) for y < x. When y > x, the alignment remains of type I but in this case it is the band gap of the substrate GaAs_1−yN_y which is fully inside the band gap of the GaAs_1−xN_x over layer. Besides the CBO, the VBO and the relaxed/strained band gap of two particular cases: GaAs_1−xN_x/GaAs and GaAs_1−xN_x/GaAs_0.98N_0.02 heterointerfaces have been determined.     

Principal energy band gaps of the quaternary alloy AlxGa1−xSbyAs1−y

The correlated function expansion (CFE) interpolation procedure was presented to efficiently estimate principal energy band gaps and lattice constants of the quaternary alloy Al_xGa_1−xSb_yAs_1−y over the entire composition variable space. The lattice matching conditions between x and y for the alloy Al_xGa_1−xSb_yAs_1−y substrated to InAs and GaSb were obtained by optimizing the alloy lattice constant to that of the substrates. The corresponding principal band gaps (E(Γ), E(L), and E(X)) were also calculated along the lattice matching condition on each substrate (InAs and GaSb).     

Metastable ferromagnetic phases with predictable Tcs in La2MnCo1−xNixO6

Metastable ferromagnetic phases, for different compositions in La₂MnCo_1−xNi_xO₆, are obtained for samples synthesized by a low-temperature method and annealed in air at different temperatures in the range 200-1350 °C. The T_cs of the ferromagnetic phases vary linearly between those of the phases of the end members. T_cs of the different phases of La₂MnCo_1−xNi_xO₆ can be predicted based on the T_cs and spin states of Mn, Co and Ni in the different phases of the end members, La₂MnCoO₆ and La₂MnNiO₆.     

The size and strain effects on the Raman spectra of Ce1−xNdxO2−δ (0≤x≤0.25) nanopowders

Ultrafine Ce_1−xNd_xO_2−δ (x=0-0.25) powders were synthesized by self-propagating room temperature synthesis. Raman spectra were measured at room temperature in the 300-700 cm⁻¹ spectral range. The shift and asymmetric broadening of the Raman F_2g mode at about 454 cm⁻¹ in pure and doped ceria samples could be explained with combined size and inhomogenous strain effects. Increased concentration of O²⁻ vacancies with doping is followed by an appearance of new Raman feature at about 545 cm⁻¹.     

The effect of addition of gallium on the thermal stability and crystallization kinetic parameters of GaxSe100−x glass system

Differential scanning calorimetry (DSC) technique was used to study the kinetics of amorphous to crystalline transformation for Ga_xSe_100−x glass system (x=0, 2.5 and 5 at%). The kinetic parameters of Ga_xSe_100−x glass system under non-isothermal conditions are analyzed by the model-free and model-fitting models at different constant heating rates (5-50 K/min). A strong heating rate dependence of the effective activation energy of crystallization was observed. The analysis of the present data shows that the effective activation energy of crystallization is not constant but varies with the degree of crystallization and with temperature as well. The crystallization mechanisms examined using the local Avrami exponents indicate that one mechanism (volume nucleation with one-dimensional growth) is responsible for the crystallization process for heating rates 5-50 K/min for Se glass and two mechanisms (volume nucleation with two- and one-dimensional growth) are working simultaneously during the amorphous-crystalline transformation of the Ga_2.5Se_97.5 and Ga₅Se₉₅ glasses (5-50 K/min). The reaction model that may describe crystallization process of all the compositions of Ga_xSe_100−x glass system is Avrami-Erofeev model (g(α)=[−ln(1−α)]^1/n) with n=2 for Se glass. While for Ga_2.5Se_97.5 and Ga₅Se₉₅ glasses, the values of n are equal to 3 and 2 for the heating rates 5-20 and 35-50 K/min, respectively. A good agreement between the experimental and the reconstructed (α-T) curves has been achieved. The transformation from amorphous to crystalline phase in Ga_xSe_100−x glass system demonstrates complex multi-step involving several processes.     

Structural study of CoxGe100−x alloys produced by mechanical alloying

Two alloys of the Co-Ge system were produced by mechanical alloying starting from the elemental powders in the compositions Co₂₀Ge₈₀ and Co₄₀Ge₆₀. The crystalline structures of the Co_xGe_100−x (x=20, 40) alloys obtained were investigated using the X-ray diffraction (XRD) technique. The measured XRD patterns showed the presence of the peaks corresponding to the crystalline m-CoGe phase and also to the high pressure and temperature phase c-CoGe in the as-milled sample for Co₂₀Ge₈₀, although it was milled at room temperature and pressure. For Co₄₀Ge₆₀, the crystalline Co₃Ge₂ phase was obtained, and structural data for all phases were determined by means of a Rietveld refinement procedure. The thermal stability of the phases was investigated performing a heat treatment of the alloys at 450 °C for 6 h and, after that, new XRD measurements were collected and were also studied using a Rietveld refinement procedure. The m-CoGe and Co₃Ge₂ phases seem to be very stable, but the relative amount of c-CoGe decreases a little, indicating a less stable phase, which can be explained by the fact that it is produced usually under extreme conditions.     

Structural and optical properties of ZnO nanorods grown on MgxZn1−xO buffer layers

ZnO nanorod arrays were synthesized by chemical-liquid deposition techniques on Mg_xZn_1−xO (x = 0, 0.07 and 0.15) buffer layers. It is found that varying the Mg concentration could control the diameter, vertical alignment, crystallization, and density of the ZnO nanorods. The X-ray diffraction (XRD), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) data show the ZnO nanorods prefer to grow in the (0 0 2) c-axis direction better with a larger Mg concentration. The photoluminescence (PL) spectra of ZnO nanorods exhibit that the ultraviolet (UV) emission becomes stronger and the defect emission becomes weaker by increasing the Mg concentration in Mg_xZn_1−xO buffer layers.     

Optical investigations of polycrystalline Mg1−xB2 near metal-insulator transition

We measured reflectivity spectra of polycrystalline Mg_1−xB₂ samples, which show a metal-insulator transition with x. After performing the Kramers-Kronig analysis, the obtained optical conductivity spectra σ(ω) of MgB₂ show a narrow Drude peak in the far-infrared region and a broad peak in the mid-infrared region. As x increases, the spectral weight of the Drude peak is strongly suppressed and that of the broad peak becomes enhanced a little. The existence of the broad mid-infrared peak in the insulating sample suggests that this peak might not be related to the free carriers in MgB₂. In the far-infrared region, we also observe that the low energy dielectric constant of Mg_1−xB₂ diverges near the metal-insulator phase boundary (i.e. x=0.08). This result implies the possibility of a phase separation and a percolative metal-insulator transition in Mg_1−xB₂.     

The magnetic behavior of La1−xTbxMn2Si2 (0≤x≤0.3) in weak magnetic fields

The structure and magnetic properties of La_1−xTb_xMn₂Si₂ (0≤x≤0.3) were studied by X-ray powder diffraction and DC magnetization measurements. All the compounds crystallize in ThCr₂Si₂-type structure. Substitution of Tb for La led to a linear decrease in the lattice constants and the unit-cell volume. A ferromagnetic phase for x≤0.15, and an antiferromagnetic phase for x=0.3 have been observed at about room temperature, whereas the compounds with x=0.2 and 0.25 exhibit a magnetic phase transition from ferromagnetism to antiferromagnetism.     

Ferroelectric properties of highly c-axis oriented Bi4−xLaxTi3O12 film-based capacitors

Highly c-axis oriented lanthanum-modified bismuth titanate (Bi_4−xLa_xTi₃O₁₂) films having a variety of lanthanum (La) contents were grown on Pt/TiO₂/SiO₂/Si(100) substrates using metal-organic sol deposition and subsequent annealing at 650 °C for 1 h. After systematically examining the ferroelectric properties of Bi_4−xLa_xTi₃O₁₂ films as a function of the La-content, it was concluded that the film with x=0.85 had the largest remanent polarization in the direction parallel to the c-axis. The Pt/Bi_3.15La_0.85Ti₃O₁₂/Pt capacitor showed a well-saturated polarization-electric field (P-E) switching curve with the switching remanent polarization (2P_r) value of 33 μC/cm² and the coercive field (E_c) of 68 kV/cm at an applied voltage of 10 V. More importantly, the capacitor exhibited fatigue-free behavior up to 6.5×10¹⁰ read/write switching cycles at a frequency of 1 MHz. The capacitor also demonstrated an excellent charge-retaining ability and a strong resistance against the imprinting failure.