Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Molecular weight control of polyethylene waxes using a constrained imino‐cyclopenta[b]pyridyl‐nickel catalyst

Five examples of nickel(II) bromide complexes bearing N,N‐imino‐cyclopenta[b ]pyridines, [7‐(ArN)‐6,6‐Me₂C₈H₅N]NiBr₂ (Ar = 2,6‐Me₂C₆H₃ ( Ni1 ), 2,6‐Et₂C₆H₃ ( Ni2 ), 2,6‐i‐ Pr₂C₆H₃ ( Ni3 ), 2,4,6‐Me₃C₆H₂ ( Ni4 ), 2,6‐Et₂‐4‐MeC₆H₂ ( Ni5 )), have been prepared by the reaction of the corresponding ligand, L1 – L5 , with NiBr₂(DME) (DME = 1,2‐dimethoxyethane). On crystallization from bench dichloromethane, Ni1 underwent adventitious reaction with water to give the aqua salt, [ L1 NiBr(OH₂)₃][Br] ( Ni1' ). The molecular structures of Ni1' and Ni3 have been structurally characterized, the latter revealing a bromide‐bridged dimer. On activation with either MMAO or Et₂AlCl, Ni1 , Ni2 , Ni4, and Ni5 , all exhibited high activities for ethylene polymerization (up to 3.88 × 10⁶ g(PE) mol^?1(Ni) h^?1); the most sterically bulky Ni3 gave only low activity. Polyethylene waxes are a feature of the materials obtained which typically display low molecular weights (M _ws), narrow M _w distributions and unsaturated vinyl and vinylene functionalities. Notably, the catalyst comprising Ni1 /Et₂AlCl produced polyethylene with the lowest M _w, 0.67 kg mol^?1, which is less than any previously reported data for any class of cycloalkyl‐fused pyridine–nickel catalyst. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3494–3505     

Balancing high thermal stability with high activity in diaryliminoacenaphthene‐nickel(II) catalysts for ethylene polymerization

The N,N‐diaryliminoacenaphthenes, 1,2‐[2,4‐{(4‐FC₆H₄)₂CH}₂‐6‐MeC₆H₄N]₂‐C₂C₁₀H₆ ( L1 ) and 1‐[2,4‐{(4‐FC₆H₄)₂CH}₂‐6‐MeC₆H₄N]‐2‐(ArN)C₂C₁₀H₆ (Ar = 2,6‐Me₂C₆H₃ L2 , 2,6‐Et₂C₆H₃ L3 , 2,6‐i‐Pr₂C₆H₃ L4 , 2,4,6‐Me₃C₆H₂ L5 , 2,6‐Et₂‐4‐MeC₆H₂ L6 ), incorporating at least one N ?2,4‐bis(difluoro benzhydryl)‐6‐methylphenyl group, have been synthesized and fully characterized. Interaction of L1 – L6 with (DME)NiBr₂ (DME = 1,2‐dimethoxyethane) generates the corresponding nickel(II) bromide N,N‐chelates, L NiBr₂ ( 1 – 6 ), in high yield. The molecular structures of 3 and 6 reveal distorted tetrahedral geometries at nickel with the ortho‐substituted difluorobenzhydryl group providing enhanced steric protection to only one side of the metal center. On activation with various aluminum alkyl co‐catalysts, such as methylaluminoxane (MAO) or Et₂AlCl, 1 – 6 displayed outstanding activity toward ethylene polymerization (up to 1.02 × 10⁷ g of PE (mol of Ni)^?1 h^?1). Notably 1 , bearing equivalent fluorobenzhydryl‐substituted N‐aryl groups, was able in the presence of Et₂AlCl to couple high activity with exceptional thermal stability generating high molecular weight branched polyethylenes at temperatures as high as 100 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1971–1983     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Alkylaluminum activator effects on polyethylene branching using a N,N′‐nickel precatalyst appended with bulky 4,4′‐dimethoxybenzhydryl groups

Ten unsymmetrical N,N'‐bis (imino) acenaphthene‐nickel (II) halide complexes, [1‐[2,6‐{(4‐MeOC₆H₄)₂CH}₂–4‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂, each appended with one N‐2,6‐bis(4,4'‐dimethoxybenzhydryl)‐4‐methylphenyl group, have been synthesized and characterized. The molecular structures of Ni1 , Ni3 , Ni5 and Ni6 highlight the variation in steric protection afforded by the inequivalent N‐aryl groups; a distorted tetrahedral geometry is conferred about each nickel center. On activation with diethylaluminum chloride (Et₂AlCl) or methylaluminoxane (MAO), all complexes showed high activity at 30°C for the polymerization of ethylene with the least bulky bromide precatalysts ( Ni1 and Ni4 ), generally the most productive, forming polyethylenes with narrow dispersities [M_w/M_n: < 3.4 (Et₂AlCl), < 4.1 (MAO)] and various levels of branching. Significantly, this level of branching can be influenced by the type of co‐catalyst employed, with Et₂AlCl having a predilection towards polymers displaying significantly higher branching contents than with MAO [T_m: 33.0–82.5°C (Et₂AlCl) vs. 117.9–119.4°C (MAO)]. On the other hand, the molecular weights of the materials obtained with each co‐catalyst were high and, in some cases, entering the ultra‐high molecular weight range [M_w range: 6.8–12.2 × 10⁵ g mol^?1 (Et₂AlCl), 7.2–10.9 × 10⁵ g mol^?1 (MAO)]. Furthermore, good tensile strength (ε_b up to 553.5%) and elastic recovery (up to 84%) have been displayed by selected more branched polymers highlighting their elastomeric properties.     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Synthesis and Characterization of m‐Terphenyl (1,3‐Diphenylbenzene) Compounds Containing Trifluoromethyl Groups

The bis(silyl)triazene compound 2,6‐(Me₃Si)₂‐4‐Me‐1‐(N?N? NC₄H₈)C₆H₂ ( 4 ) was synthesized by double lithiation/silylation of 2,6‐Br₂‐4‐Me‐1‐(N?N? NC₄H₈)C₆H₂ ( 1 ). Furthermore, 2,6‐bis[3,5‐(CF₃)₂‐C₆H₃]‐4‐Me‐C₆H₂‐1‐(N?N? NC₄H₈)C₆H₂ derivative 6 can be easily synthesized by a C,C‐bond formation reaction of 1 with the corresponding aryl‐Grignard reagent, i.e., 3,5‐bis[(trifluoromethyl)phenyl]magnesium bromide. Reactions of compound 4 with KI and 6 with I₂ afforded in good yields novel phenyl derivatives, 2,6‐(Me₃Si)₂‐4‐MeC₆H₂? I and 2,6‐bis[3,5‐(CF₃)₂? C₆H₃]‐4‐MeC₆H₂? I ( 5 and 7 , resp.). On the other hand, the analogous m‐terphenyl 1,3‐diphenylbenzene compound 2,6‐bis[3,5‐(CF₃)₂? C₆H₃]C₆H₃? I ( 8 ) could be obtained in moderate yield from the reaction of (2,6‐dichlorophenyl)lithium and 2 equiv. of aryl‐Grignard reagent, followed by the reaction with I₂. Different attempts to introduce the ^tBu (Me₃C) or neophyl (PhC(Me)₂CH₂) substituents in the central ring were unsuccessful. All the compounds were fully characterized by elemental analysis, melting point, IR and NMR spectroscopy. The structure of compound 6 was corroborated by single‐crystal X‐ray diffraction measurements.     

Facile synthesis of sterically demanding SHOP‐type nickel catalysts for ethylene polymerization

The P,O‐chelated shell higher olefin process (SHOP) type nickel complexes are practical homogeneous catalysts for the industrial preparation of linear low‐carbon α‐olefins from ethylene. We describes that a facile synthetic route enables the modulation of steric hindrance and electronic nature of SHOP‐type nickel complexes. A series of sterically bulky SHOP‐type nickel complexes with variable electronic nature, {[4‐R‐C₆H₄C(O) = C‐PArPh]NiPh (PPh₃); Ar = 2‐[2′,6′‐(OMe)₂C₆H₃]C₆H₄; R = H ( Ni1 ); R = OMe ( Ni2 ); R = CF₃ ( Ni3 )}, were prepared and used as single component catalysts toward ethylene polymerization without using any phosphine scavenger. These nickel catalysts exhibit high thermal stability during ethylene polymerization and result in highly crystalline linear α‐olefinic solid polymer. The catalytic performance of the SHOP‐type nickel complexes was significantly improved by introducing a bulky ortho‐biphenyl group on the phosphorous atom or an electron‐withdrawing trifluoromethyl on the backbone of the ligand, indicating steric and electronic effects play critical roles in SHOP‐type nickel complexes catalyzed ethylene polymerization.     

Vinyl polymerization of norbornene catalyzed by 2‐Py‐amidine Ni(II) complex/methylaluminoxane systems

Two 2‐Py‐amidine ligands (2‐Py―NH―C(Ph)═N―Ar, Ar = 2,6‐Me₂C₆H₃ and 2,6‐ⁱPr₂C₆H₃) and the corresponding Ni(II) complexes ( 1 and 2 ) were synthesized and characterized using elemental analysis and FT‐IR, UV–visible, ¹H NMR and ¹³C NMR spectroscopies. X‐ray crystal structures indicate that the chelate ring conformation of the less bulky complex 1 is relatively planar compared with that of the bulky complex 2 . Paramagnetic ¹H NMR and ¹³C NMR studies show that, in solution, the time‐average structures of complexes 1 and 2 have mirror symmetry. Both complexes 1 and 2 were used as catalyst precursors for norbornene polymerization with methylaluminoxane as a co‐catalyst. The effects of Al/Ni ratio, temperature and structure of precursors on the catalytic performance were investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Bis(β‐diketiminato) lanthanide amides: synthesis,structure and catalysis for the polymerization of l‐lactide and ε‐caprolactone

Treatment of the chlorides (L^2,6‐iPr2_Ph)₂LnCl (L^2,6‐iPr2_Ph = [(2,6‐ⁱPr₂C₆H₃)NC(Me)CHC(Me)N(C₆H₅)]^?) with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃) afforded the monoamides (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Y ( 1 ), Yb ( 2 )) in good yields. Anhydrous LnCl₃ reacted with 2 equiv. of NaL^2,6‐iPr2_Ph in THF, followed by treatment with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃), giving the analogues (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Sm ( 3 ), Nd ( 4 )). Two monoamido complexes stabilized by two L^2‐Me ligands, (L^2‐Me)₂LnNH(2,6‐ⁱPr₂C₆H₃) (L^2‐Me = [N(2‐MeC₆H₄)C(Me)]₂CH)^?; Ln = Y ( 5 ), Yb ( 6 )), were also synthesized by the latter route. Complexes 1 , 2 , 3 , 4 , 5 , 6 were fully characterized, including X‐ray crystal structure analyses. Complexes 1 , 2 , 3 , 4 , 5 , 6 are isostructural. The central metal in each complex is ligated by two β‐diketiminato ligands and one amido group in a distorted trigonal bipyramid. All the complexes were found to be highly active in the ring‐opening polymerization of L‐lactide (L‐LA) and ε‐caprolactone (ε‐CL) to give polymers with relatively narrow molar mass distributions. The activity depends on both the central metal and the ligand (Yb < Y < Sm ≈ Nd and L^2‐Me < L^2,6‐iPr2_Ph). Remarkably, the binary 3/benzyl alcohol (BnOH) system exhibited a striking ‘immortal’ nature and proved able to quantitatively convert 5000 equiv. of L‐LA with up to 100 equiv. of BnOH per metal initiator. All the resulting PLAs showed monomodal, narrow distributions (M_w/M_n = 1.06 ? 1.08), with molar mass (M_n) decreasing proportionally with an increasing amount of BnOH. The binary 4/BnOH system also exhibited an ‘immortal’ nature in the polymerization of ε‐CL in toluene. Copyright © 2014 John Wiley & Sons, Ltd.     

β‐Diketiminatoytterbium aryloxides: synthesis,structural characterization,and catalytic activity for addition of amines to carbodiimides

The steric effect of an aryloxido group on the synthesis and molecular structures of ytterbium aryloxides supported by β‐diketiminato ligand L (L = [N(2,6‐Me₂C₆H₃)C(Me)]₂CH^?) is reported. Reactions of β‐diketiminatoytterbium dichloride, LYbCl₂(THF)₂, with NaOAr¹ in THF (Ar¹ = [2,6‐^tBu₂‐4‐MeC₆H₂], THF = tetrahydrofuran) at 60°C gave the corresponding ytterbium complexes LYb(OAr¹)Cl(THF) ( 1 ) and LYb(OAr¹)₂ (1), depending on the molar ratio of dichloride to sodium aryloxide, respectively, while the same reactions with NaOAr² and NaOAr³ (Ar² = [2,6‐ⁱPr₂C₆H₃], Ar³ = [2,6‐Me₂C₆H₃]) in 1:1 or 1:2 molar ratio in THF afforded only bisaryloxide complexes LYb(OAr²)₂(THF) (1) and LYb(OAr³)₂(THF) ( 4 ) in good yields, respectively. Complexes 1 , 2 , 3 , 4 were fully characterized, including X‐ray crystal structure analyses. All the complexes are efficient pre‐catalysts for the catalytic addition of amines to carbodiimides giving guanidines. Copyright © 2013 John Wiley & Sons, Ltd.     

Cycloheptyl‐fused NNO‐ligands as electronically modifiable supports for M(II) (M = Co,Fe) chloride precatalysts; probing performance in ethylene oligo‐/polymerization

The N,N,O‐cobalt(II), [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]CoCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Co1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Co2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Co3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Co4 ) and N,N,O‐iron(II) complexes, [2,3‐{C₄H₈C(NAr)}:5,6‐{C₄H₈C(O)}C₅HN]FeCl₂ (Ar = 2,6‐(CHPh₂)₂‐4‐MeC₆H₂ Fe1 , 2,6‐(CHPh₂)₂‐4‐EtC₆H₂ Fe2 , 2,6‐(CHPh₂)₂‐4‐ClC₆H₂ Fe3 , 2,6‐(CHPh₂)₂‐4‐FC₆H₂ Fe4 ), each containing one sterically enhanced but electronically modifiable N‐2,6‐dibenzhydryl‐4‐R²‐phenyl group, have been prepared by a one‐pot template approach using α,α′‐dioxo‐2,3:5,6‐bis(pentamethylene)pyridine, the corresponding aniline along with the respective cobalt or iron salt in acetic acid. Distorted square pyramidal geometries are a feature of the molecular structures of Co1 – Co4 . Upon activation with MAO or MMAO, Co1 – Co4 show good activities (up to 2.2 × 10⁵ g mol^?1(Co) h^?1) affording short chain oligomers (C₄–C₃₀) with good α‐olefin selectivity. By contrast, Fe1 – Fe4 , in the presence of MMAO, displayed moderate activities (up 10.9 × 10⁴ g(PE) mol^?1(Fe) h^?1) for ethylene polymerization forming low‐molecular‐weight linear polymers (up to 13.0 kg mol^?1) incorporating saturated n‐propyl and i‐butyl chain ends. For both cobalt and iron, the precatalysts incorporating the more electron withdrawing 4‐R²‐substituents [Cl ( Co3 / Fe3 ), F ( Co4 / Fe4 )] deliver the best catalytic activities, while with cobalt, these types of substituents additionally broaden the oligomeric distribution. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3980–3989     

Atmospheric reactivity of ethylene catalyzed by β‐diketiminato Ni(II)/methylaluminoxane system

Atmospheric ethylene reactions were studied with backbone fluorinated β‐diketiminato Ni(II) complexes CH{C(CF₃)NAr}₂NiBr (1, Ar = 2,6‐Me₂C₆H₃, and 2 2,6‐ⁱPr₂C₆H₃) activated by methylaluminoxane (MAO). The catalytic systems exhibit the characteristics of catalyzing simultaneously polymerization and oligomerization of ethylene, indicating different active species involved in the reaction system. In an effort to investigate the alkylation species involved in the β‐diketiminato nickel (II)/MAO system, the reaction of 1 with methylaluminoxane were studied. With ¹⁹F{¹H NMR} spectra, two sets of new signals different from 1 were presented. Two alkylation products were proposed precursors of active species for producing oligomer and polymer of ethylene in the β‐diketiminato Ni(II)/MAO system. Copyright © 2014 John Wiley & Sons, Ltd.     

Stable N‐Heterocyclic Carbene Adducts of Arylchlorosilylenes and Their Germanium Homologues

The first N‐heterocyclic carbene adducts of arylchlorosilylenes are reported and compared with the homologous germanium compounds. The arylsilicon(II) chlorides SiArCl(Im‐Me₄) [Ar=C₆H₃‐2,6‐Mes₂ (Mes=C₆H₂‐2,4,6‐Me₃), C₆H₃‐2,6‐Trip₂ (Trip=C₆H₂‐2,4,6‐iPr₃)] were obtained selectively on dehydrochlorination of the arylchlorosilanes SiArHCl₂ with 1,3,4,5‐tetramethylimidazol‐2‐ylidene (Im‐Me₄). The analogous arylgermanium(II) chlorides GeArCl(Im‐Me₄) were prepared by metathetical exchange of GeCl₂(Im‐Me₄) with LiC₆H₃‐2,6‐Mes₂ or addition of Im‐Me₄ to GeCl(C₆H₃‐2,6‐Trip₂). All compounds were fully characterized. Density functional calculations on ECl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄), where E=Si, Ge, at different levels of theory show very good agreement between calculated and experimental bonding parameters, and NBO analyses reveal similar electronic structures of the two aryltetrel(II) chlorides. The low gas‐phase Gibbs free energy of bond dissociation of SiCl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄) (Δ${G{{{\circ}\hfill \atop {\rm calcd}\hfill}}}$ =28.1 kJ mol^?1) suggests that the carbene adducts SiArCl(Im‐Me₄) may be valuable transfer reagents of the arylsilicon(II) chlorides SiArCl.     

(Imido)vanadium Complexes as Efficient Catalyst Precursors for Olefin Polymerization/Oligomerization

(Arylimido)vanadium(V) complexes containing anionic ancillary donor ligands of type, V(NAr)Cl₂(L) (Ar = 2,6-Me₂C₆H₃, L = aryloxo, ketimide phenoxyimine, etc.) exhibited high catalytic activities for ethylene polymerization in the presence of Al cocatalyst; V(NAr)Cl₂(O-2,6-Me₂C₆H₃) showed the exceptionally high activities in the presence of halogenated Al alkyls such as Et₂AlCl, EtAlCl₂, etc. (Arylimido)vanadium(V)-alkylidene complexes, V(CHSiMe₃)(NAr)(L′) (L′ = N=C ^t Bu₂, O-2,6- ⁱ Pr₂C₆H₃) exhibited the remarkable catalytic activities for ring-opening metathesis polymerization of norbornene. (Imido)vanadium(V) complexes containing the (2-anilidomethyl)pyridine ligand, V(NR)Cl₂[2-Ar′NCH₂(C₅H₄N)] (R = 1-adamantyl, cyclohexyl, phenyl, Ar′ = 2,6-Me₂C₆H₃, 2,6- ⁱ Pr₂C₆H₃), exhibit the remarkable activities for ethylene dimerization in the presence of MAO, affording 1-butene exclusively (selectivity 90.4 to >99%). The steric bulk of the imido ligand plays an important role in the selectivity, and the electronic nature directly affects the activity.     

Novel nickel (II) complexes chelating β‐diketiminate ligands: synthesis and simultaneous polymerization and oligomerization of ethylene

Two novel nickel (II) complexes, CH{C(CF₃)NAr}₂NiBr ( 1 , Ar = 2,6‐ⁱPr₂C₆H₃ and 2 , 2,6‐Me₂C₆H₃), were synthesized by the reaction of the lithium salt of fluorinated β‐diketiminate backbone ligands with (1,2‐dimethoxyethane) nickel (II) bromide [(DME)NiBr₂]. The solid‐state structure of nickel (II) complex 2 as a dimer reveals four‐coordination and a tetrahedral geometry with bromide bridged by single crystal X‐ray measurement. Both complexes catalyze simultaneous polymerization and oligomerization of ethylene when activated by methylaluminoxane (MAO). It was found that the reaction temperature has a pronounced effect on the activity of ethylene polymerization and the molecular weight of obtained polyethylene. In addition, the nickel catalytic systems predominantly produce linear polyethylene with unsaturated end groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Reactions of Rare‐Earth Metal Based Lewis Pairs with Azides†

The reactivity of homoleptic rare‐earth metal aryloxide based Lewis pairs toward organic azide substrates has been investigated herein. Treatment of RE(OAr)₃ (RE = La, Sm, Y, and Sc, Ar = 2,6‐^tBu₂‐C₆H₃), PEt₃ and Me₃SiN₃ in 2 : 1 : 1 molar ratio resulted in formation of separated ion pair complexes [Me₃Si‐PEt₃]⁺[(ArO)₃RE‐N=N=N‐RE(OAr)₃]^– under mild conditions. Replacement of phosphine with the nitrogen‐containing Lewis base 1,4‐diazabicyclo[2.2.2]octane (DABCO) produced analogous rare‐earth azide complexes with [Me₃Si‐DABCO]⁺ counterions. In contrast, reaction of the La(OAr)₃/PEt₃ Lewis pair with 1‐adamantyl azide (AdN₃) afforded the typical frustrated Lewis pair‐type 1,1‐addition product. A tetrahydrofuran ring‐opening reaction was also observed for the resulting rare‐earth azide complex with the [Me₃Si‐PEt₃]⁺ cation, with cleavage of the C—O bond by Si/P cooperation.     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Vinyl/Vinylene functionalized highly branched polyethylene waxes obtained using electronically controlled cyclohexyl‐fused pyridinylimine‐nickel precatalysts

A series of 8‐(2,6‐dibenzhydryl‐4‐R‐phenylimino)‐5,6,7‐trihydroquinoline ligands have been prepared in which the nature of 4‐R substitutions vary from electron withdrawing to electron donating. The treatment with NiCl₂.6H₂O or (DME)NiBr₂ afforded the corresponding complexes of nickel chloride (4‐R = Me Ni1 , Et Ni2 , ^tBu Ni3 , CHPh₂ Ni4 , Cl Ni5 , and F Ni6 ) and nickel bromide (4‐R = Me Ni7 , Et Ni8 , ^tBu Ni9 , CHPh₂ Ni10 , Cl Ni11 , and F Ni12 ). X‐ray diffraction study of complexes Ni3 , Ni6 , and Ni10 , revealed that Ni3.1/2H₂O and Ni6.H₂O adopted unsymmetrical and symmetrical chloride‐bridged dinuclear structures respectively, while Ni10.H₂O is found as mononuclear specie forming distorted‐square planer geometry. In the presence of either diethylaluminum chloride (Et₂AlCl) or modified methylaluminoxane (MMAO), all the nickel complexes ( Ni1–Ni12 ) displayed high activities (up to 1.91 × 10⁶ g(PE) mol (Ni)⁻¹h⁻¹. Highly branched polyethylene waxes with low molecular weights (M_w ≤ 2.6 kg/mol) and narrow molecular weights distributions (M_w/M_n ≤ 1.96) incorporated with vinylene and vinyl groups were obtained. The effects of 4‐R substitutions to the nickel chloride and bromide pre‐catalysts and reaction conditions on the catalytic performance and the properties of the resulting polyethylene were the subject of a detail investigation. The positive influences of using electron‐withdrawing 4‐R substitutions and bromides were observed. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1269–1281