Nature of solvation effects and mechanism of heterolysis of <Emphasis Type="Italic">tert</Emphasis>-alkyl halides

Specificities of heterolysis of tert-alkyl halides in protic and aprotic solvents were analyzed. Values of log k ₂₅ for heterolysis of tert-butyl chloride, tert-butyl bromide, tert-butyl iodiede, 1-chloro-1-methylcyclopentane, 1-chloro-1-methylcyclohexane, 1-bromo-1-methylcyclopentane, 1-bromo-1-methylcyclohexane, 2-chloro-2-phenylpropane, 1-iodoadamantane, and 2-bromo-2-methyladamantane in 19 to 44 solvents, determined mostly by the verdazyl technique were collected. Correlation analysis of solvation effects was performed in terms of multiparameter equations based on the linear free energy relationship principle, as well as in the logk-E _T coordinates. The nature of solvation effects and mechanism of heterolysis of a covalent C-Hlg bond were discussed.     

Reactions of Arylenedioxytrihalophosphoranes with Acetylenes: XV.<Superscript>1</Superscript> Reaction of 2,2,2-Tribromo-4,6-di-<Emphasis Type="Italic">tert</Emphasis>-butylbenzo-1,3,2λ<Superscript>5</Superscript>-dioxaphospholedioxaphosphole with Pent-1-yne

2,2,2-Tribromo-4,6-di-tert-butylbenzo-1,3,2λ⁵-dioxaphospholedioxaphosphole reacted with a terminal alkyne, pent-1-yne, to give a mixture of two isomeric 1,2-benzoxaphosphinine derivatives, 6,8- and 5,7-di-tert-butyl-2-bromo-4-propylbenzo-1,2λ⁵-oxaphosphinin-2-oxides, at a ratio of 5.9: 1. The regioselectivity of substitution of oxygen in the dioxaphosphole fragment by carbon differs from that observed previously in the reaction with 4,6-di-tert-butyl-2,2,2-trichlorobenzo-1,3,2λ⁵-dioxaphosphole: the minor isomer was formed as a result of substitution of the oxygen atom in the ortho position with respect to one tert-butyl group of the initial phosphole.     

Basicity of isomeric ditetrazolylbenzenes and their <Emphasis Type="Italic">N-tert</Emphasis>-butyl derivatives

The basicity constants \((pK_{BH^ + } ,pK_{BH^{2 + } } )\) of 1,2-, 1,3-, and 1,4-bis(tetrazol-5-yl)benzenes and their N-tert-butyl derivatives in aqueous sulfuric acid and the dissociation constants (pK _HB) of the corresponding H-complexes with p-fluorophenol in carbon tetrachloride were determined by UV and IR spectroscopy. Mono-and diprotonation of isomeric ditetrazolylbenzenes is observed in the acidity range (H ₀) from ?1 to ?5 (\(pK_{BH^ + } \) ?2.5 to ?3.0; \(pK_{BH^{2 + } } \) ?3.8 to ?4.9). Introduction of a tert-butyl group into the 2-position of the heteroring almost does not affect the basicity of ditetrazolyl benzenes. Among the examined compounds, 1,2-bis(2-tert-butyltetrazol-5-yl)benzene is the strongest proton acceptor with respect to p-fluorophenol as standard proton donor, presumably due to formation of a complex with bifurcated (three-center) hydrogen bond.     

Chemoselective acylation of monosubstituted thiacalix[4]arene with di-<Emphasis Type="Italic">tert</Emphasis>-butyl dicarbonate

Mono-, di-, and tetrasubstituted derivatives of p-tert-butylthiacalix[4]arene containing tert-butylcarbamate, tert-butylcarbonate, and tert-butyl fragments have been prepared for the first time. Depending on the reaction conditions (reagents ratio, temperature, and the presence of a base), the interaction of the monoamine derivative of p-tert-butylthiacalix[4]arene with di-tert-butyl dicarbonate can lead to the formation of mono-, di-, and tetrasubstituted products.     

Synthesis of urethane—acrylic multi-block copolymers via electrochemically mediated ATRP

The electrochemically mediated atom transfer radical polymerisation (eATRP) of n-butyl acrylate was investigated under a variety of catalyst concentrations. Poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers were prepared via electrochemically mediated atom transfer radical polymerisation (eATRP) using only 7 × 10^?6 mole % of Cu^II complex. The successful chain extension and formation of penta-block copolymers confirmed the living nature of the poly(alkyl acrylates) prepared by eATRP. In this work, the tri-block and penta-block urethane-acrylate copolymers were synthesised for the first time by using tertiary bromine-terminated polyurethane macro-initiators as transitional products reacting with n-butyl acrylate, and subsequently with tert-butyl acrylate in the presence of the Cu^IIBr₂/TPMA catalyst complex. The results of ¹H NMR spectral studies support the formation of tri-block poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate) copolymers, and penta-block poly(tert-butyl acrylate)-block-poly(n-butyl acrylate)-block-polyurethane-block-poly(n-butyl acrylate)-block-poly(tert-butyl acrylate) copolymers.     

2-Amino-4-bromobutanoic Acid

(2S)- and (2R)-2-Amino-4-bromobutanoic acid were prepared starting from N-Boc-glutamic acid α tert-butyl ester. The double tert-butyl protection was necessary to prevent a partial racemisation during Barton’s radical decarboxylation used to transform the γ-carboxylic group into a bromide. This bromide reacted with different nitrogen, oxygen and sulphur nucleophiles to give nonnatural amino acids characterised by basic or heterocyclic side chains. The title compound was also used to prepare a conformationally constrained peptidomimetic.     

(Liquid + liquid) equilibria of methanol + ethylbenzene + isooctane + methy <Emphasis Type="Italic">tert</Emphasis>-butyl ether quaternary system at <Emphasis Type="Italic">T</Emphasis> = 303.15 K

Tie line data of {methanol + methyl tert-butyl ether + isooctane} ternary systems were obtained at T = 303.15 K, while data for {methanol + ethylbenzene + isooctane} were taken from literature. The ternary system {methanol + methyl tert-butyl ether + ethylbenzene} and {methyl tert-butyl ether + ethylbenzene + isooctane} were completely miscible. A quaternary system {methanol + ethylbenzene + isooctane + methyl tert-butyl ether} was also studied at the same temperature. In order to obtain equilibium data of the quaternary system, four quaternary sectional planes with several methyl tert-butyl ether/methanol ratios were studied. The effect of the addition of methyl tert-butyl ether on the liquid-liquid equilibrium data of {methanol + ethylbenzene + isooctane} ternary system has been investigate at the same temperature. The distribution curves for ternary and quaternary system was analysed. For the quaternary system {methanol + ethylbenzene + isooctane + methyl tert-butyl ether}, experimental data demonstrated that the distribution coefficient of ethylbenzene between the hydrocarbon and methanol phase on a methyl tert-butyl ether–free basis slightly increases with the increase of methyl tert-butyl ether/methanol ratio. Ternary experimental results were correlated with the UNIQUAC and NRTL equation. The NRTL equation is more accurate than the UNIQUAC equation for the ternary systems studied here. The equilibrium data of three ternary systems were used for determining interactions parameters for the UNIQUAC equation. The UNIQUAC equation fitted to the experimental data appeared to be more accurate than the UNIFAC method for the same quaternary system.     

Synthesis and characterization of half-sandwich ruthenium(II) complexes with N-alkyl pyridyl-imine ligands and their application in transfer hydrogenation of ketones

A series of new arene ruthenium(II) complexes were prepared by reaction of ruthenium(II) precursors of the general formula [(η⁶-arene)Ru(μ-Cl)Cl]₂ with N,N′-bidentate pyridyl-imine ligands to form complexes of the type [(η⁶-arene)RuCl(C₅H₄N-2-CH=N-R)]PF₆, with arene = C₆H₆, R = iso-propyl (1a), tert-butyl (1b), cyclohexyl (1c), cyclopentyl (1d) and n-butyl (1e); arene = p-cymene, R = iso-propyl (2a), tert-butyl (2b). The complexes were fully characterized by ¹H NMR and ¹³C NMR, UV–Vis and IR spectroscopies, elemental analyses, and the single-crystal X-ray structures of 2a and 2b have been determined. The single-crystal molecular structure revealed both compounds with a pseudo-octahedral geometry around the Ru(II) center, normally referred to as a piano stool conformation, with the pyridyl-imine as a bidentate N,N ligand. The activity of all complexes in the transfer hydrogenation of cyclohexanone in the presence of NaOH and iso-propanol is reported, the compounds showing turnover numbers of close to 1990 and high conversions. Complex 2b was also shown to be very effective for a range of aliphatic and cyclic ketones, giving conversions of up to 100 %.     

Generation of oxodiazonium ions 6. Unexpected formation of tetrazole 1-oxides

(E)-2-[2,2-Bis(tert-butyl-NNO-azoxy)-1-(methylsulfinyl)vinyl]-1-isopropoxydiazene 1-oxide reacts with boron trifluoride etherate (BF₃?Et₂O) producing 2-tert-butyl-N-nitro-2H-tetrazolo-5-carboxamide 4-oxide and 2-tert-butyl-2H-tetrazolo-5-carbonitrile 4-oxide but not the expected 1,2,3,4-tetrazine 1,3-dioxide derivative. This reaction direction can be explained by cationic domino cyclization, the key stage of which is coupling of the oxodiazonium ion with the geminal MeS(O) group. Structure of N-nitrocarboxamide was confirmed by X-ray diffraction analysis.     

Kinetics of the Acid-Base Interaction between Tetra(4-<Emphasis Type="Italic">tert</Emphasis>-butyl)phthalocyanine and Nitrogen-Containing Bases in Dimethyl Sulfoxide

Specific features of the acid-base interaction of tetra(4-tert-butyl)phthalocyanine with cyclic and acyclic nitrogen-containing bases in dimethyl sulfoxide are studied. The effect of pK _a of proton-withdrawing molecules, basicity of a medium, and steric screening of acidic NH centers on the kinetic parameters of formation of proton-transfer complexes stable in time is shown.     

Reaction of Potassium 1,1,3,3-Tetracyano-2-(2,2-dimethylpropanoyl)propenide with 2-Sulfanylethanol

The reaction of potassium 2-(2,2-dimethylpropanoyl)-1,1,3,3-tetracyanopropenide with an equimolar amount of 2-sulfanylethanol afforded 2-{5-amino-2-(tert-butyl)-4-cyano-2-[(2-hydroxyethyl)sulfanyl]- 2,3-dihydrofuran-3-ylidene}propanedinitrile, whereas 4-amino-1-(tert-butyl)-1,6-bis[(2-hydroxyethyl)- sulfanyl]-3-imino-1,3-dihydrofuro[3,4-c]pyridine-7-carbonitrile was obtained in the reaction with excess 2-sulfanylethanol.     

Synthesis and structure of 2,2′-spirobi(1,3-benzodioxole) derivative prepared from 3,5-di(<Emphasis Type="Italic">tert</Emphasis>-butyl)-1,2-benzoquinone

3,5-Di(tert-butyl)-1,2-benzoquinone reacted with 1,2,3-trimethylbenzimidazolium iodide led to the formation of 2,2′-spirobi[4,6-di(tert-butyl)-1,3-benzodioxole]. The reaction mechanism was suggested. The structure of 2,2′-spirobi[4,6-di(tert-butyl)-1,3-benzodioxole] was established by means of X-ray diffraction analysis.     

Synthesis,Crystal Structure,and Catalytic Property of a Dioxomolybdenum(VI) Complex Derived from <Emphasis Type="Italic">N</Emphasis>'-(3-Bromo-5-Chloro-2-Hydroxybenzylidene)-4-Nitrobenzohydrazide

New dioxomolybdenum(VI) complex [MoO₂(L)(CH₃OH)], where L is the dianionic form of N'- (3-bromo-5-chloro-2-hydroxybenzylidene)-4-nitrobenzohydrazide (H₂L), was prepared and characterized by IR and UV-Vis spectra, as well as single crystal X-ray diffraction (CIF file ССDС no. 1567063). The complex crystallizes as the monoclinic space group P2₁/c with unit cell dimensions a = 13.8471(10), b = 7.5618(6), c = 17.9445(12) Å, β = 90.107(2)°, V = 1878.9(2) ų, Z = 4, R¹ = 0.0821, wR₂ = 0.0907, GOOF = 1.024. X-ray analysis indicates that the complex is a dioxomolybdenum(VI) species with the Mo atom in octahedral coordination. The catalytic oxidation property of the complex with tert-butylhydroperoxide in CH₂Cl₂ was studied.     

6,6'-[piperazine-1,4-diylbis(methylene)]bis[3,5-di(<Emphasis Type="Italic">tert</Emphasis>-butyl)-1,2- benzoquinone]: Synthesis and properties

Preparation method is developed for a new 6,6'-[piperazine-1,4-diylbis(methylene)]bis[3,5-di(tert-butyl)- 1,2-benzoquinone], including the stage of 3,5-di(tert-butyl)pyrocatechol aminoalkylation by Mannich reaction followed by oxidation. The molecular structure of one of its hydrolysis products, 4,6-di(tert-butyl)-2,3-dihydroxybenzaldehyde, is established by X-ray diffraction (XRD) analysis.     

Titanium tetra-<Emphasis Type="Italic">tert</Emphasis>-butoxide-<Emphasis Type="Italic">tert</Emphasis>-butyl hydroperoxide oxidizing system: Physicochemical and chemical aspects

The reaction of titanium tetra-tert-butoxide with tert-butyl hydroperoxide (1: 2) (C₆H₆, 20 C) involves the steps of formation of the titanium-containing peroxide (t-BuO)₃TiOOBu-t and peroxytrioxide (t-BuO)₃TiOOOBu-t. The latter decomposes with the release of oxygen, often in the singlet form, and also homolytically with cleavage of both peroxy bonds. The corresponding alkoxy and peroxy radicals were identified by ESR using spin traps. The title system oxidizes organic substrates under mild conditions. Depending on the substrate structure, the active oxidant species can be titanium-containing peroxide, peroxytrioxide, and oxygen generated by the system.     

Synthesis and spectral properties of unsymmetrical benzoporphyrins containing phenoxy groups or quinoxaline fragments

Condensation of phthalimide and 4-tert-butylphthalimide with zinc(II) acetate gave 3-(3-oxo-2,3-dihydro-1H-isoindol-1-ylidenemethyl)-1H-isoindol-1-one and 5-tert-butyl-3-(5-tert-butyl-3-oxo-2,3-dihydro-1H-isoindol-1-ylidenemethyl)-1H-isoindol-1-one, respectively. Their reactions with 4-phenoxyphthalimide and quinoxaline-2,3-dicarboximide in the presence of Zn(OAc)₂ led to the formation of zinc complexes of cis-4,4′-diphenoxytetrabenzoporphyrin and cis-di(4-tert-butylbenzo)diquinoxalinoporphyrin. The complexes were converted into the free bases by treatment with sulfuric acid. Spectral properties of the obtained porphyrin derivatives were studied.     

Kinetics and Mechanism of Unimolecular Heterolysis of Framework Compounds: XVII. Solvation Effects in Dehydrobromination of <Emphasis Type="Italic">tert</Emphasis>-Butyl Bromide, 1-Bromo-1-Methylcyclohexane,and 2-Bromo-2-methyladamantane in Dipolar Aprotic Solvents

Dehydrobromination rate of tert-butyl bromide, 1-bromo-1-methylcyclohexane, and 2-bromo-2-methyladamantane grows with increasing polarity and dipole moment of solvents. No correlation was found between rate constants of the process and electrophilicity or ionizing power of the solvents. The observed solvation effects are due mainly to dispersion interactions.     

Molecular structures of new 2-(quinoline-2-yl)-1,3-tropolones

The molecular structures of 5,7-di(tert-butyl)-2-(6,8-dimethyl-4-piperidinoquinoline-2-yl)-3-hydroxytropone and 5,7-di(tert-butyl)-2-(5,8-dimethyl-4-piperidinoquinoline-2-yl)-3-hydroxytropone are determined by the single crystal X-ray diffraction analysis.     

Urotropin synthesis of 3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butylsalicylic acid derivatives

The stability of 3,5-di-tert-butylsalicylic aldehyde against oxidation is due to autoinhibiting of the chain process. However its oxidation into 3,5-di-tert-butylsalicylic acid was performed at the use of acetyl protection of the hydroxy group. In reaction of 6-bromo-2,4-di-tert-butylphenol with urotropin the formation was discovered of 3,5-di-tert-butylsalicylic acid, its nitrile and amide.     

Cobalt-catalyzed bisperoxidation of styrenes

A cobalt-catalyzed peroxidation of styrenes with tert-butyl hydroperoxide gives 1-aryl-1,2-bis(tert-butylperoxy)ethanes in up to 53% yields.