Preparation and thermal properties of asymmetrically substituted poly(silylenemethylene)s

Poly(silylenemethylene)s of the types [SiMeRCH₂]_n and [SiHRCH₂]_n were prepared by the ring-opening polymerization (ROP) of 1,3-disilacyclobutanes (DSCBs) containing n-alkyl substituents, such as C₂H₅, n-C₃H₇, n-C₄H₉, n-C₅H₁₁, and n-C₆H₁₃, or a phenyl group on the Si. These new polymers include a monosilicon analog of poly(styrene), [SiHPhCH₂]_n. Improved synthesis routes to the DSCB monomers were developed which proceed through Grignard ring closure reactions on alkoxy-substituted chlorocarbosilanes. All of these asymmetrically substituted polymers were obtained in high molecular weight form, except for [SiHPhCH₂]_n. The configurations of all of the polymers were found to be atactic. The aryl-substituted polymers have higher glass transition temperatures (T_gs) and thermal stability than those of the alkyl-substituted poly(silylenemethylene)s. Unlike the polyolefins of the type [C(H)(R)CH₂]_n, where T_g drops continuously from R = Me to n-Hex, the T_gs of the n-C_nH_2n+1 (n = 2–6)-substituted [SiMeRCH₂]_n PSM's appear to reach a maximum (at −61°C) for the R = n-Pr-substituted polymer. Moreover, where it was possible to make direct comparisons among similarly substituted atactic polymers, all of the poly(silylenemethylene)s were found to have lower T_gs than their all-carbon analogs. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3193–3205, 1997     

Synthesis of poly(cyanurate)s by a novel polyaddition of bis(epoxide)s with triazine dichloride

Poly(cyanurate)s (P‐1–P‐4) containing triazine groups in the main chain and pendant chloromethyl groups in the side chain were synthesized by the polyaddition of bis(epoxide)s with 2,4‐dichloro‐6‐(diphenylamino)‐s‐triazine (DPAT) using quaternary onium salts as catalysts. The polyaddition of diglycidyl ether of bisphenol‐A (DGEBA) with DPAT proceeded smoothly in chlorobenzene at 100 °C for 12 h to give P‐1 with M_n = 19,000 in a 92% yield, when tetrabutylammonium chloride (TBAC) was used as a catalyst. However, no reaction occurred without a catalyst or with triethylamine alone under the same reaction conditions. Polyadditions of other bis(epoxide)s with DPTA also proceeded smoothly using 5 mol % of TBAC as a catalyst in chlorobenzene to produce corresponding polymers (P‐2≈P‐4) in high yields under similar reaction conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4006–4012, 2000     

Poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s derived from a dihydroxy(imidoarylene) monomer

Novel poly(arylene ether)s, poly(arylene thioether)s, and poly(arylene sulfone)s were synthesized from the dihydroxy(imidoarylene) monomer 1 . The syntheses of poly(arylene ether)s were carried out in DMAc in the presence of anhydrous K₂CO₃ by a nucleophilic substitution reaction between the bisphenol and activated difluoro compounds. Poly(arylene thioether)s were synthesized according to the recently discovered one-pot polymerization reaction between a bis(N,N′-dimethyl-S-carbamate) and activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃. The bis(N,N′-dimethyl-S-carbamate) 3 was synthesized by the thermal rearrangement reaction of bis(N,N′-dimethylthiocarbamate) 2 , which was synthesized from 1 by a phase-transfer catalyzed reaction. The poly(arylene thioether)s were further oxidized to form poly(arylene sulfone)s, which would be very difficult, if not impossible, to synthesize by other methods. All of the polymers described have extremely high T_gs and thermal stability as determined from DSC and TGA analysis. Poly(arylene sulfone)s have the highest T_gs and they are in the range of 298–361°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1201–1208, 1998     

Isomerization polymerization of alkyl glycidyl carbonates to produce novel poly(orthocarbonate)s

The isomerization polymerization of three alkyl glycidyl carbonates (4), i.e., glycidyl methyl carbonate (4a), ethyl glycidyl carbonate (4b), and glycidyl propyl carbonate (4c), catalyzed by methylaluminum bis(2,6‐di‐t‐butyl‐4‐methylphenoxide) (3) to afford novel poly(orthocarbonate)s, poly[(2‐alkoxy‐1,3‐dioxolane‐2,4‐diyl)oxymethylene]s (5a–c), is described. The polymerization proceeded best at around room temperature and gave 5 having several thousands of M_n. As the alkoxy chain of 4 was lengthened, the polymer yield decreased, while the polymer molecular weight increased. The yields of 5b and 5c, however, were improved by increasing the feed ratio of 3 to 4 from 0.04 to 0.10. The reactivity of 4 was discussed in relation to that of glycidyl alkanoates (1). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 445–453, 1999 (See graphics.)     

A novel poly(p‐phenylene) containing alternating poly(perfluorooctylethyl acrylate‐co‐methyl methacrylate) and polystyrene grafts by combination of atom transfer radical polymerization and Suzuki coupling processes

A poly(p‐phenylene) (PP), carrying perfectly alternating, well‐defined poly(perfluorooctylethyl acrylate‐co‐methyl methacrylate) [P(FEA‐co‐MMA)] and polystyrene (PS) side chain grafts, was synthesized by the combination of atom transfer radical polymerization (ATRP) and Suzuki cross‐coupling processes. First, dibromobenzene and diboronic ester functional macromonomers of P(FEA‐co‐MMA) and PS, respectively, were prepared by ATRP. In the second step, PP with lateral alternating P(FEA‐co‐MMA) and PS chains was synthesized by a Suzuki coupling reaction in the presence of Pd(PPh₃)₄ catalyst. The wetting behavior of the polymers was studied by measurements of the static contact angle θ of thin films (200?400 nm thickness) using water and n‐hexadecane as wetting liquids. The obtained fluorinated PP showed high static contact angles with both interrogating liquids, exhibiting simultaneously hydrophobic (θ_w = 111°) and lipophobic (θ_h = 67°) properties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of poly(silyl ether)s containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with dichlorosilanes

The polyaddition of bis(3‐ethyl‐3‐oxetanylmethyl) terephthalate (BEOT) with dichlorodiphenylsilane (CPS) using tetrabutylammonium bromide (TBAB) as a catalyst proceeded under mild reaction conditions to afford a polymer containing silicon atoms in the polymer main chain. A poly(silyl ether) (P‐1) with a high molecular weight (M_n = 53,200) was obtained by the reaction of BEOT with CPS in the presence of 5 mol % of TBAB in toluene at 0 °C for 1 h and then at 50 °C for 24 h. The structure of the resulting polymer was confirmed by IR and ¹H NMR spectra. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with dichlorosilanes proceeds smoothly to give corresponding poly(silyl ether)s with TBAB as the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2254–2259, 2000     

Influence of ortho‐substituents on the synthesis and properties of poly(phenylacetylene)s

The phenylacetylene derivatives (4‐decyloxyphenyl)acetylene ( M1 ), (4‐decyloxy‐2‐methylphenyl)acetylene ( M2 ), and (4‐decyloxy‐2,6‐dimethylphenyl)acetylene ( M3 ) were polymerized by the well‐defined Schrock‐type initiator Mo[N‐2,6‐i‐Pr₂C₆H₃)(CHCMe₂Ph)[OCMe(CF₃)₂]₂ ( I1 ) and by the ill‐defined quaternary system MoOCl₄–n‐Bu₄Sn–EtOH–quinuclidine (1:1:2:1) ( I2 ). Comparison of the compatibility of the initiators with the different monomers revealed a correlation of the size of the ortho‐substituents and the polymerizability of the monomers. M1 and M2 readily polymerized employing I1 , but conversion of the sterically demanding monomer M3 remained incomplete. However, the use of I2 led to high monomer conversions and polymer yields only in case of M2 and M3 . The steric bulkiness of the ortho‐substituents also decisively affected the maximum effective conjugation length (N_eff) of the polymers and hence their absorption maximum (λ_max) as well as their solution stability as shown by UV–vis and GPC studies, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4466–4477, 2004     

Synthesis and characterization of block poly(ester‐ether‐urethane)s from bacterial poly(3‐hydroxybutyrate) oligomers

Telechelic hydroxylated poly(3‐hydroxybutyrate) (PHB‐diol) oligomers have been successfully synthesized in 90–95% yield from high molar mass PHB by tin‐catalyzed alcoholysis with different diols (mainly 1,4‐butanediol) in diglyme. The PHB‐diol oligomers structure was studied by nuclear magnetic resonance, Fourier transformed infrared spectroscopy MALDI‐ToF MS, and size exclusion chromatography, whereas their crystalline structures, thermal properties and thermal stability were analyzed by wide angle X‐ray scattering, DSC, and thermogravimetric analyses. The kinetic of the alcoholysis was studied and the influence of (i) the catalyst amount, (ii) the diol amount, (iii) the reaction temperature, and (iv) the diol chain length on the molar mass was discussed. The influence of the PHB‐diol molar mass on the thermal stability, the thermal properties and optical properties was investigated. Then, tin‐catalyzed poly(ester‐ether‐urethane)s (PEEU) of M_n = 15,000–20,000 g/mol were synthesized in 1,2‐dichloroethane from PHB‐diol oligomers (P_ester) with modified 4,4'‐MDI and different polyether‐diols (P_ether) (PEG‐2000, PEG‐4000, and PPG‐PEG‐PPG). The influence of the PHB‐diol chain length, the P_ether/P_ester ratio, the polyether segment nature and the PEG chain length on the thermal properties and crystalline structures of PEEUs was particularly discussed. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1949–1961     

Synthesis and fractionation of poly(phenylene methylene)

Poly(phenylene methylene) (PPM) was isolated in a broad range of molar masses by optimization of the catalytic polymerization of benzyl chloride with SnCl₄ or FeCl₃, followed by fractionation by Soxhlet extraction or phase separation in concentrated solutions in poor solvents. Low molar mass products were also obtained by quenching the reaction at moderate monomer conversions. Products with number average molar masses (M_n) ranging from 200 to 61,000 g mol⁻¹ were isolated, the latter being an order of magnitude above the previously reported values. DSC analysis of polymers of different molar masses revealed that the glass transition temperature follows the Flory‐Fox equation reaching a plateau value of 65 °C at a molar mass between 10,000 and 20,000 g mol⁻¹. The onset of decomposition temperature of higher molar mass products proceeds above 450 °C (maximum decomposition rate at 515 °C), according to TGA. Furthermore, the substitution pattern of PPM was discussed by study of chemical shifts of the methylene group by extensive NMR spectroscopy (¹H, ¹³C, DEPT, and HSQC) and by comparison with two mono‐substituted derivatives of PPM—poly(2,4,6‐trimethylphenylene methylene) and poly(2,3,5,6‐tetramethylphenylene methylene)—which were synthesized analogous to PPM. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 309–318     

Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Morphology-dependent luminescence properties of poly(benzyl ether) dendrimers

Poly(benzyl ether) dendrimers with o-, m-, and p-isomers of dialkoxybenzene at their focal points [o-, m-, and p-(Gn)₂Ar], having generation numbers (n) of 0–3, were synthesized. ¹H NMR pulse relaxation times (T₁) of the exterior MeO groups of o- and m-(Gn)₂Ar (n = 0–3) all remained in the range of 0.92–1.43 s. In sharp contrast, an exceptionally short T₁ value (0.23 s) was observed for p-(G3)₂Ar. Although their absorption spectral profiles were slightly different from one another, an essential difference was observed for their fluorescence properties. When the generation number was increased, the fluorescence efficiency of o-(Gn)₂Ar increased, but that of p-(Gn)₂Ar decreased, whereas m-(Gn)₂Ar exhibited a relatively small change in the fluorescence efficiency. Fluorescence depolarization studies showed a highly efficient intramolecular energy migration in p-(G3)₂Ar as compared with o-(G3)₂Ar and m-(G3)₂Ar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3524–3530, 2003     

The behavior of poly(amino acids) containing l‐cysteine and their block copolymers with poly(ethylene glycol) on gold surfaces

Poly(ethylene glycol) (PEG) is often used to biocompatibilize surfaces of implantable biomedical devices. Here, block copolymers consisting of PEG and l ‐cysteine‐containing poly(amino acid)s (PAA's) were synthesized as polymeric multianchor systems for the covalent attachment to gold surfaces or surfaces decorated with gold nanoparticles. Amino‐terminated PEG was used as macroinitiator in the ring‐opening polymerization, (ROP), of respective amino acid N‐carboxyanhydrides (NCA's) of l ‐cysteine (l ‐Cys), l ‐glutamate (l ‐Glu), and l ‐lysine (l ‐Lys). The resulting block copolymers formed either diblock copolymers, PEG‐b‐p(l ‐Glu_x‐co‐l ‐Cys_y) or triblock copolymers, PEG‐b‐p(l ‐Glu)_x‐b‐p(l ‐Cys)_y. The monomer feed ratio matches the actual copolymer composition, which, together with high yields and a low polydispersity, indicates that the NCA ROP follows a living mechanism. The l ‐Cys repeat units act as anchors to the gold surface or the gold nanoparticles and the l ‐Glu repeat units act as spacers for the reactive l ‐Cys units. Surface analysis by atomic force microscopy revealed that all block copolymers formed homogenous and pin‐hole free surface coatings and the phase separation of mutually immiscible PEG and PAA blocks was observed. A different concept for the biocompatibilization of surfaces was followed when thiol‐terminated p(l ‐Lys) homopolymer was first grafted to the surface and then covalently decorated with HOOC‐CH₂‐PEG‐b‐p(Bz‐l ‐Glu) polymeric micelles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 248–257     

Hyperbranched poly(arylene ethynylene)s with triphenylamine core for polymer light‐emitting diodes

A series of light‐emitting hyperbranched poly(arylene ethynylene)s (HB‐PAEs) were prepared by the Sonogashira coupling from bisethynyl of carbazole, fluorene, or dialkoxybenzenes (A₂ type) and tris(4‐iodophenyl)amine (B₃ type). For comparison, two linear polymers (L‐PAEs) of the HB analogs were also synthesized. The polymers were characterized by Fourier transform infrared, NMR, and GPC. The HB polymers showed excellent solubility in chloroform, THF, and chlorobenzene when compared with their linear analogs. The number‐average molecular weight (M_n) of the polymers determined from GPC was found to be in the range of 18,600–34,200. The polymers were thermally stable up to 298–330 °C with only 5% weight loss. The absorption maxima of the polymers were between 354 and 411 nm with optical band gap in the range of 2.5–2.9 eV. The HB polymers were found to be highly fluorescent with photoluminescence quantum yields around 33–42%. The highest occupied molecular orbital energy levels of the polymers calculated from onset oxidation potentials were found to be in the range from ?5.83 to ?6.20 eV. Electroluminescence (EL) properties of three HB‐PAEs and one L‐PAE were investigated with device configuration ITO/PEDOT:PSS/Polymer/LiF/Al. The EL maxima of HB‐PAEs were found to be in the range of 507–558 nm with turn‐on voltages around 7.5–10 V and maximum brightness values of 316–490 cd/m². At the same time, linear analog of one HB‐PAE was found to show a maximum brightness of 300 cd/m² at a turn‐on voltage of 8.2 V. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of poly(hydroxyurethane)s

Bis(cyclic Carbonate)s 1 were prepared by the reaction of bis(epoxide)s and atmospheric pressure of CO₂ in the presence of sodium iodide and triphenylphosphine as catalysts at 100°C in high yield. Polyaddition of 1 and hexamethylenediamine ( 2a ) or dodecamethylenediamine ( 2b ) in dimethylsulfoxide or N,N-dimethylacetamide (DMAc) at 70 or 100°C for 24 h afforded corresponding poly(hydroxyurethane)s with M?_n 20,000–30,000. When ethylenediamine ( 2c ) or 1,3-propanediamine ( 2d ) was used as a diamine, poly(hydroxyurethane)s with lower molecular weight were obtained. The presence of water, methanol, or ethyl acetate in the solvent had little effect on the M?_n of the polymer obtained, because of the high chemoselectivity of the reaction of the five-membered cyclic carbonate and amine. Polyaddition of bis(cyclic carbonate) bearing ester groups and 2a also afforded the corresponding poly(hydroxyurethane) without aminolysis of the ester groups. Poly(hydroxyurethane) 3 obtained from the bis(cyclic carbonate) derived from bisphenol A was less soluble in organic solvents than model polyurethane 8 having no hydroxy groups obtained from 4,4′-isopropylidenebis(2-hydroxyethoxybenzene) and hexamethylene diisocyanate, and was thermally stable as well as 8.3 easily undertook crosslinking at room temperature by the treatment with hexamethylene diisocyanate or aluminium triisopropoxide in DMAc or tetrahydrofuran. The gel crosslinked by aluminium triisopropoxide regenerated the original polymer at room temperature by treatment with 1.5 equiv of 1.2M HCl in N-methylpyrollidinone for 1 h. © 1993 John Wiley & Sons, Inc.     

Novel,biodegradable, functional poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate bearing a pendent carboxylic group

Water‐soluble poly(ester‐carbonate) having pendent amino and carboxylic groups on the main‐chain carbon is reported for the first time. This article describes the melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) at a wide range of molar fractions. The influence of reaction conditions such as catalyst concentration, polymerization time, and temperature on the number average molecular weight (M_n) and molecular weight distribution (M_w/M_n) of the copolymers was investigated. The polymerizations were carried out in bulk at 110 °C with 3 wt % stannous octoate as a catalyst for 16 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, and gel permeation chromatography. The copolymers synthesized exhibited moderate molecular weights (M_n = 6000–14,700 g mol^?1) with reasonable molecular weight distributions (M_w/M_n = 1.11–2.23). The values of the glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of cyclic carbonate. When the MBC content decreased from 76 to 12 mol %, the T_g increased from 16 to 48 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐MBC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐MBC)s was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. Debenzylation of 3 by catalytic hydrogenation led to the corresponding linear poly(ester‐carbonate), 4 , with pendent amino and carboxylic groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2303–2312, 2004     

Synthesis of new poly(amide imide)s with (n‐alkyloxy)phenyloxy side branches

Two series of new poly(amide imide)s having (n‐alkyoxy)phenyloxy side branches with various lengths, poly{p‐phenyleneiminoterephthaloylimino‐p‐phenylene[3,6‐di(n‐alkyloxy)phenyloxy]pyromellitimide}s ( PC _m TA s, m = 4, 8, 12) and poly{p‐phenyleneiminosebacoylimino‐p‐phenylene[3,6‐di(n‐alkyloxy)‐phenyloxy]‐ pyromellitimide}s ( PC _m SeA s, m = 4, 8, 12), were prepared by condensation of terephthalamide‐N,N′‐4,4′‐dianiline ( TA ) and sebacamide‐N,N′‐4,4′‐dianiline ( SeA ) with 3,6‐di[4‐(n‐alkyloxy)phenyloxy]pyromellitic dianhydrides , respectively. The inherent viscosities of the polymers were in the 0.82–1.20 dL/g range. The polymers were highly soluble in N‐methylpyrolidinone (NMP), even at room temperature and soluble in other polar aprotic solvents on heating. The PC _m TA s, which have aromatic backbones, were thermally more stable (431–442 °C) than the PC _m SeA s, which have an octamethylene unit in the main chain (407–409 °C). Degradation of weight up to 900 °C corresponded with the loss of side chain contents. The PC _m TA s exhibited no phase transition, whereas two endothermic peaks were observed for each of the PC _m SeA s. Wide‐angle X‐ray diffractometer investigations revealed that both polymers are amorphous and the n‐alkyloxy side chains are present in a layered structure. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3818–3825, 2001     

Synthesis,functionalization and crosslinking reactions of poly(silylenemethylene)s

Novel poly(silylenemethylene)s have been prepared by the ring‐opening polymerization of 1,3‐disilacyclobutanes followed by a protodesilylation reaction with triflic acid. The silicon–aryl bond cleavage could be controlled by using different leaving groups, for instance phenyl‐ and para‐anisyl substituents. The reactions of the triflate derivatives with organomagnesium compounds, LiAlH₄, amines or alcohols gave functional substituted poly(silylenemethylene)s. Hydrosilylation reactions or reductive coupling with potassium–graphite led to organosilicon network‐polymers, which may serve as suitable precursors for silicon carbide and Si/C/N‐based materials. The structures of the polymers were identified by nuclear magnetic resonance spectroscopy (²⁹Si, ¹³C, ¹H). Copyright © 1999 John Wiley & Sons, Ltd.     

Synthesis of new amphiphilic diblock copolymers containing poly(ethylene oxide) and poly(α‐olefin)

This article discusses an effective route to prepare amphiphilic diblock copolymers containing a poly(ethylene oxide) block and a polyolefin block that includes semicrystalline thermoplastics, such as polyethylene and syndiotactic polystyrene (s‐PS), and elastomers, such as poly(ethylene‐co‐1‐octene) and poly(ethylene‐co‐styrene) random copolymers. The broad choice of polyolefin blocks provides the amphiphilic copolymers with a wide range of thermal properties from high melting temperature ～270 °C to low glass‐transition temperature ～?60 °C. The chemistry involves two reaction steps, including the preparation of a borane group‐terminated polyolefin by the combination of a metallocene catalyst and a borane chain‐transfer agent as well as the interconversion of a borane terminal group to an anionic (? O^?K⁺) terminal group for the subsequent ring‐opening polymerization of ethylene oxide. The overall reaction process resembles a transformation from the metallocene polymerization of α‐olefins to the ring‐opening polymerization of ethylene oxide. The well‐defined reaction mechanisms in both steps provide the diblock copolymer with controlled molecular structure in terms of composition, molecular weight, moderate molecular weight distribution (M_w/M_n < 2.5), and absence of homopolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3416–3425, 2002     

Melting behavior of poly(tetrahydrofuran)-S and their blends

Melting behavior of poly(tetrahydrofuran)-s (PTHF) and their blend with different molecular masses has been studied by TM-DSC. PTHF and their blend show two endothermic peaks on their curve. The melting peak temperatures T _m1 and T _m2, entropy of fusion ΔS _f1 and ΔS _f2, and mean relaxation time for melting τ_f1 and τ_f2 have been estimated, and their dependence on the molecular mass has been examined. Plots of Tm1 to the reciprocal of their molecular mass fit a simple equation (T _m=a-b/M _n). Plots of T _m2 to their molecular mass also fit the equation with different factors. There seems to be a boundary around molecular mass 1200 in the molecular mass dependence of ΔS _fand τ_f. Effect of blending appeared on the τ_f and the non-reversing heat flow. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cationic poly(ester‐phosphoester)s: Facile synthesis and antibacterial properties

Biodegradable poly(ester‐phosphoester)s bearing multiple chloroethyl groups were synthesized facilely by the ring‐opening copolymerization of 2‐(2‐chloroethoxy)‐2‐oxo‐1,3,2‐dioxaphospholane (CEP) and ε‐caprolactone (CL) in the presence of lanthanum tris(2,6‐di‐tert‐butyl‐4‐methylphenolate)s (La(DBMP)₃) as single‐component catalyst under mild conditions. Then the quaternization reaction was carried out between the halide copolymers and a series of N,N‐dimethyl alkylamines to give poly(ester‐phosphoester)s containing ammonium groups with various charge density and alkyl chain length. The antibacterial properties of these cationic poly(esterphosphoester)s were evaluated by OD600 and zone of inhibition methods against gram‐negative (Escherichia coli) and gram‐positive (Staphylococcus aureus) bacteria. Cationic poly(esterphosphoester)s with long alkyl chain on the ammonium groups show excellent antibacterial activity for both gram‐negative and gram‐positive bacteria even with low charge density. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3667–3673