3,4‐[2,2‐Bis(methoxyethoxymethoxymethyl)propylenedithio]‐3′,4′‐(ethylenedithio)tetrathiafulvalene: a spiro‐substituted BEDT–TTF analogue

The crystal structure of the title compound [systematic name: 2‐(1,3‐dithiolo[4,5‐b][1,4]dithiin‐2‐ylidene)‐6,6‐bis(methoxyethoxymethoxymethyl)‐1,3‐dithiolo[4,5‐b][1,4]dithiepine], C₂₁H₃₀O₆S₈, a spiro‐substituted BEDT–TTF analogue [BEDT–TTF is bis(ethylenedithio)tetrathiafulvalene], has a strongly bent heterocyclic framework. The seven‐membered ring adopts a pseudo‐chair conformation with notably widened ring bond angles, especially at the methylene C atoms [119.49 (11) and 117.60 (11)°]. The axial side chain adopts an extended conformation, but the equatorial side chain curls back on itself and the O atom nearest the ring system is involved in three short contacts to H atoms (2.45–2.53 Å). The molecules pack in centrosymmetrically related pairs, which are isolated from each other by columns of the polyether side chains. This study emphasizes the ease of distortion of the neutral bis(propylenedithio)tetrathiafulvalene ring structure, and how the need to accommodate side chains can easily override the tendency of these donor systems to form stacks in the crystalline state.     

Diastereoselective Synthesis of (Z)‐6‐(2‐Oxo‐1,2‐dihydro‐3H‐indol‐3‐ylidene)‐3,3a,9,9a‐tetrahydroimidazo[4,5‐e]thiazolo[3,2‐b]‐1,2,4‐triazin‐2,7(1H,6H)‐diones

Two efficient and diastereoselective procedures for the synthesis of (Z)‐6‐(2‐oxo‐1,2‐dihydro‐3H‐indol‐3‐ylidene)‐3,3a,9,9a‐tetrahydroimidazo[4,5‐e]thiazolo[3,2‐b]‐1,2,4‐triazin‐2,7(1H,6H)‐diones by aldol‐crotonic condensation of 1,3‐dimethyl‐3a,9a‐diphenyl‐3,3a,9,9a‐tetrahydroimidazo[4,5‐e]thiazolo[3,2‐b]‐1,2,4‐triazin‐2,7(1H,6H)‐dione with isatins under acidic or basic catalysis are reported. Isomerization in (Z)‐7‐(1‐allyl‐2‐oxo‐1,2‐dihydro‐3H‐indol‐3‐ylidene)‐1,3‐dimethyl‐3a,9a‐diphenyl‐1,3a,4,9a‐tetrahydroimidazo[4,5‐e]thiazolo[2,3‐c]‐1,2,4‐triazin‐2,8(3H,7H)‐dione was observed under basic conditions.     

Rare examples of base pairing via a protonated pyridine N atom in two salts of N2,N6‐bis(1,3‐dimethylimidazolin‐2‐ylidene)pyridine‐2,6‐diamine

The title compounds, namely 2,6‐bis[(1,3‐dimethylimidazolin‐2‐ylidene)amino]pyridinium perchlorate, C₁₅H₂₄N₇⁺·ClO₄⁻, (I), and bis{2,6‐bis[(1,3‐dimethylimidazolin‐2‐ylidene)amino]pyridinium} μ‐oxido‐bis[trichloridoiron(III)], (C₁₅H₂₄N₇)₂[Fe₂Cl₆O], (II), are structurally unusual examples of the organization of molecular units via base pairing. The cations in salts (I) and (II) are derived from the bisguanidine N²,N⁶‐bis(1,3‐dimethylimidazolin‐2‐ylidene)pyridine‐2,6‐diamine, which associates in centrosymmetric pairs via two N—H...N hydrogen‐bond interactions. N—H...N bridges are formed between the protonated pyridine N atom and one of the nonprotonated guanidine N atoms, with N...H distances of 2.01 (1)–2.10 (1) Å. Compound (I) contains two crystallographically independent cations and anions per asymmetric unit. One of the perchlorate anions is disordered, while the [Fe₂Cl₆O]²⁻ anion lies on an inversion centre.     

Syntheses and X‐ray Structure Analyses of the First Bis(chelated) Copper and Iron Bisguanidine Complexes

The synthesis of N¹,N²‐bis(1,3‐dimethylimidazolidin‐2‐ylidene)ethane‐1,2‐diamine and the synthesis and structure determination of bis{N¹,N²‐bis(1,3‐dimethylimidazolidin‐2‐ylidene)ethane‐1,2‐diamine}copper(II)‐tetraiododicuprate(I) ([Cu(DMEG₂e)₂][Cu₂I₄]) and bis{N¹,N²‐bis(1,3‐dimethylimidazolidin‐2‐ylidene)ethane‐1,2‐diamine}iron(II)‐octacarbonyl‐diferrate(‐I) ([Fe(DMEG₂e)₂][Fe₂(CO)₈]) which represent the first bis(chelated) bisguanidine complexes are described. The dicationic [M(DMEG₂e)₂]²⁺ molecules with M = Cu, Fe follow the same structural principles and thus differ in their coordination geometries from ideal‐typical expectations.     

Systematische Studie zu den Koordinationseigenschaften des Guanidin‐Liganden N1,N2‐Bis(1,3‐dimethylimidazolidin‐2‐yliden)‐ethan‐1,2‐diamin mit den Metallen Mn,Co, Ni,Ag und Cu

A Systematic Study on the Coordination Properties of the Guanidine Ligand N¹,N²‐Bis(1,3‐dimethylimidazolidin‐2‐ylidene)‐ethane‐1,2‐diamine with the Metals Mn, Co, Ni, Ag and Cu The syntheses and characterization of the compounds [Mn(DMEG₂e)Cl₂] ( 1 ), [Co(DMEG₂e)Cl₂] ( 2 ), [Ni(DMEG₂e)₂]I₂ ( 3 ), [Cu(DMEG₂e)I] ( 4 ) and {[Ag(DMEG₂e)]BF₄}_n ( 5 ) with the bisguanidine ligand N¹,N²‐bis(1,3‐dimethylimidazolidin‐2‐ylidene)ethane‐1,2‐diamine (DMEG₂e) are described. All complexes are synthesized by the reaction of the corresponding metal salt with the DMEG₂e ligand in MeCN or THF. The coordination of the metal atoms vary from a distorted tetrahedron in 1 and 2 , a distorted trigonal planar coordination in 4 to linear coordination in 5 . Contrasting to the compounds 1 , 2 , 4 and 5 which exhibit a 1:1 ratio of metal to ligand, two DMEG₂e ligands are bound to the Ni atom in the case of 3 resulting in a coordination polyhedron which represents the stage exactly in the middle between the square‐planar and the tetrahedral geometry. Whereas crystals of 1 , 2 , 3 and 4 contain discrete molecules, in 5 the Ag atoms are alternately linked by two different DMEG₂e ligands to form a chain structure. The comparative discussion of several DMEG₂e containing complexes with the compounds reported herein supplements this systematic study.     

Synthetic and antimicrobial studies on new gold(I) complexes of imidazolidin‐2‐ylidenes

Six new 1,3‐diorganylimidazolidin‐2‐ylidene (NHC) gold(I) complexes of the type [Au(NHC)₂]⁺ (1–6), were synthesized by reacting [AuCl(PPh)₃] with 1,3‐dimesitylimidazolidin‐2‐ylidene or bis(1,3‐dialkylimidazolidin‐2‐ylidene). The complexes 1–6 were fully characterized by elemental analyses and spectroscopic data. The placement of mesityl or para‐substituted benzyl groups on the nitrogen atoms of the ring of the complexes leads to the particularly active antibacterial agents evaluated in this work. It is worth noting that the p‐methoxybenzyl derivative (2) inhibited the growth of Pseudomona aeruginosa, Staphylococcus epidermidis, Staphylococcus aureus and Enterococcus faecalis with minimum inhibitory concentration (MIC) values of 3.12 µg ml^?1, 6.25 µg ml^?1, 3.12 µg ml^?1 and 3.12 µg ml^?1 respectively. In contrast, the analogous p‐dimethylaminobenzyl derivative (3) is effective only against Escherichia coli (MIC = 3.12 µg ml^?1). Copyright © 2004 John Wiley & Sons, Ltd.     

Amine Exchange and Unexpected Ring‐Opening Reactions of Pyranone Derivatives: Synthesis of 3‐Amino‐Substituted Oxonaphthopyran‐carbaldehydes and Tetrahydropyrimidinethanones as New Potential Oligonucleotide Stabilization Agents

3‐[(3‐Aminopropyl)amino]‐1‐oxo‐1H‐naphtho[2,1‐b]pyran‐2‐carbaldehyde ( 10 ) was synthesized by nucleophilic substitution reaction of 2‐(3‐dimethylamino)‐1‐oxo‐1H‐naphtho[2,1‐b]pyran‐2‐carbaldehyde ( 9 ) and the monoprotected propane‐1,3‐diamine. The reaction with the unprotected reagent led to the unexpected 1‐(2‐hydroxynaphthalen‐1‐yl)‐2‐(tetrahydropyrimidin‐2(1H)‐ylidene)ethanone ( 6 ). Extension of this reaction to chromone 16 gave 1‐(2‐hydroxy‐3‐isopropyl‐6‐methylphenyl)‐2‐(tetrahydropyrimidin‐2(1H)‐ylidene)ethanone ( 7 ). The X‐ray crystal structures of 6 and 7 were also determined.     

Preparation,structure, and optical properties of chiral sulfoxides and disulfoxide with a trithiole ring

Optically active 4,9‐diethyl[1,4]‐dithiino[5,6‐f]benzo[1,2,3]trithiole 5‐oxide ( 3 ) and 4,9‐diethyl[1,4]dithiino[5,6‐f]benzo[1,2,3]trithiole 5,8‐dioxide ( 4 ) were obtained by the asymmetric oxidation of 6,11‐diethyl[1,4]dithiino[5,6‐h]benzo[1,2,3,4,5]pentathiepin ( 1 ). The reaction was accompanied by desulfurization and ring‐contraction reactions of the pentathiepin ring. Similarly, optically active 4,8‐diethyl[1,3]dithiolo[4,5‐f]benzo[1,2,3]trithiole 5‐oxide ( 7 ) was produced by the analogous asymmetric oxidation of 6,10‐diethyl[1,3]dithiolo[4,5‐h]benzo[1,2,3,4,5]pentathiepin ( 2 ). The specific rotations of 3 , 4 , and 7 were measured in chloroform, and their optical purity was verified by ¹H NMR with a shift reagent [Eu(hfc)₃]. The structures of 4 and 7 were determined by X‐ray crystallography using Cu Kα radiation, and the absolute configuration of the sulfinyl group was examined based on the Flack parameter, which revealed that 4 has an RR configuration, while 7 has an S configuration. The circular dichroism spectra of 3 , 4 , and 7 were measured in chloroform. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:88–94, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10104     

Systematische Studie zu den Koordinationseigenschaften des Guanidin‐Liganden Bis(tetramethylguanidino)propan mit den Metallen Mangan,Cobalt, Nickel,Zink, Cadmium,Quecksilber und Silber

The transition metal complexes with the ligand 1,3‐bis(N,N,N′,N′‐tetramethylguanidino)propane (btmgp), [Mn(btmgp)Br₂] ( 1 ), [Co(btmgp)Cl₂] ( 2 ), [Ni(btmgp)I₂] ( 3 ), [Zn(btmgp)Cl₂] ( 4 ), [Zn(btmgp)(O₂CCH₃)₂] ( 5 ), [Cd(btmgp)Cl₂] ( 6 ), [Hg(btmgp)Cl₂] ( 7 ) and [Ag₂(btmgp)₂][ClO₄]₂·2MeCN ( 8 ), were prepared and characterised for the first time. The stoichiometric reaction of the corresponding water‐free metal salts with the ligand btmgp in dry MeCN or THF resulted in the straightforward formation of the mononuclear complexes 1 – 7 and the binuclear complex 8 . In complexes with M^II the metal ion shows a distorted tetrahedral coordination whereas in 8 , the coordination of the M^I ion is almost linear. The coordination behavior of btmgp and resulting structural parameters of the corresponding complexes were discussed in an comparative approach together with already described complexes of btmgp and the bisguanidine ligand N¹,N²‐bis(1,3‐dimethylimidazolidin‐2‐ylidene)‐ethane‐1,2‐diamine (DMEG₂e), respectively.     

Mononuclear nickel(II) and zinc(II) complexes with deprotonated forms of the tripodal hexadentate ligand 1,3‐bis(2‐hydroxybenzylidene)‐2‐(2‐hydroxybenzylideneaminomethyl)‐2‐methylpropane‐1,3‐diamine

In the crystal structures of both title compounds, [1,3‐bis(2‐hydroxybenzylidene)‐2‐methyl‐2‐(2‐oxidobenzylideneaminomethyl)propane‐1,3‐diamine]nickel(II) [2‐(2‐hydroxybenzylideneaminomethyl)‐2‐methyl‐1,3‐bis(2‐oxidobenzylidene)propane‐1,3‐diamine]nickel(II) chloride methanol disolvate, [Ni(C₂₆H_25.5N₃O₃)]₂Cl·2CH₄O, and [1,3‐bis(2‐hydroxybenzylidene)‐2‐methyl‐2‐(2‐oxidobenzylideneaminomethyl)propane‐1,3‐diamine]zinc(II) perchlorate [2‐(2‐hydroxybenzylideneaminomethyl)‐2‐methyl‐1,3‐bis(2‐oxidobenzylidene)propane‐1,3‐diamine]zinc(II) methanol trisolvate, [Zn(C₂₆H₂₅N₃O₃)]ClO₄·[Zn(C₂₆H₂₆N₃O₃)]·3CH₄O, the 3d metal ion is in an approximately octahedral environment composed of three facially coordinated imine N atoms and three phenol O atoms. The two mononuclear units are linked by three phenol–phenolate O—H...O hydrogen bonds to form a dimeric structure. In the Ni compound, the asymmetric unit consists of one mononuclear unit, one‐half of a chloride anion and a methanol solvent molecule. In the O—H...O hydrogen bonds, two H atoms are located near the centre of O...O and one H atom is disordered over two positions. The Ni^II compound is thus formulated as [Ni(H_1.5L)]₂Cl·2CH₃OH [H₃L is 1,3‐bis(2‐hydroxybenzylidene)‐2‐(2‐hydroxybenzylideneaminomethyl)‐2‐methylpropane‐1,3‐diamine]. In the analogous Zn^II compound, the asymmetric unit consists of two crystallographically independent mononuclear units, one perchlorate anion and three methanol solvent molecules. The mode of hydrogen bonding connecting the two mononuclear units is slightly different, and the formula can be written as [Zn(H₂L)]ClO₄·[Zn(HL)]·3CH₃OH. In both compounds, each mononuclear unit is chiral with either a Δ or a Λ configuration because of the screw coordination arrangement of the achiral tripodal ligand around the 3d metal ion. In the dimeric structure, molecules with Δ–Δ and Λ–Λ pairs co‐exist in the crystal structure to form a racemic crystal. A notable difference is observed between the M—O(phenol) and M—O(phenolate) bond lengths, the former being longer than the latter. In addition, as the ionic radius of the metal ion decreases, the M—O and M—N bond distances decrease.     

Reactions of 2‐amino‐3‐cyano‐4,5,6,7‐tetrahydrobenzo[b]thiophene and 2‐amino‐3‐cyano‐4,7‐diphenyl‐5‐methyl‐4H‐pyrano[2,3‐c] pyrazole with phenylisocyanate,carbon disulfide,and thiourea

2‐Amino‐3‐cyano‐4,5,6,7‐tetrahydrobenzo[b]thiophene 1a or 2‐amino‐3‐cyano‐4,7‐di‐ phenyl‐5‐methyl‐4H‐pyrano[2,3‐c]pyrazole 2a reacted with phenylisocyanate in dry pyridine to give 2‐(3‐phenylureido)‐3‐cyanobenzo[b]thiophene 1b or 2‐disubstituted amino‐3‐cyanopyranopyrazole 2b derivative. However, when 1a and 2a were refluxed with carbon disulfide in 10% ethanolic sodium hydroxide solution, they afforded the thieno[2,3‐d]pyrimidin‐2,4‐dithione derivative 5 in the former case, 2,4‐dicyano‐1,3‐bis(dithio carboxamino)cyclobuta‐1,3‐ diene 6 and pyrazolopyranopyrido[2,3‐d]pyrimidin‐ 2,4‐dithione derivative 7 in the latter one. Treatment of 2a with thiourea in refluxing ethanol in the presence of potassium carbonate gave 2,2′‐dithiobispyrimidine derivative 9 (major) in addition to pyranopyrazole derivative 10 and 2,2′‐dithiobis ethoxypyrimidine derivative 11 in minor amounts. The structures of all products were evidenced by microanalytical and spectral data. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:6–11, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20070     

The first example of a two‐coordinated AuI atom bonded to an FeII atom and an N‐heterocyclic carbene (NHC) ligand

The aurophilicity exhibited by Au^I complexes depends strongly on the nature of the supporting ligands present and the length of the Au–element (Au—E) bond may be used as a measure of the donor–acceptor properties of the coordinated ligands. A binuclear iron–gold complex, [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene‐2κC²]dicarbonyl‐1κ²C‐(1η⁵‐cyclopentadienyl)gold(I)iron(II)(Au—Fe) benzene trisolvate, [AuFe(C₅H₅)(C₂₇H₃₆N₂)(CO)₂]·3C₆H₆, was prepared by reaction of K[CpFe(CO)₂] (Cp is cyclopentadienyl) with (NHC)AuCl [NHC = 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. In addition to the binuclear complex, the asymmetric unit contains three benzene solvent molecules. This is the first example of a two‐coordinated Au atom bonded to an Fe and a C atom of an N‐heterocyclic carbene.     

A Novel and Efficient Synthesis of Pyrido[1,2‐a]‐Fused 1,3‐Diazaheterocyclic Compounds via a One‐Pot Three‐Component Reaction

An efficient one‐pot synthesis of pyrido[1,2‐a]‐fused 1,3‐diazaheterocyclic compounds by three‐component reaction of diamine, nitroketene dithioacetal (=1,1‐bis(methylsulfanyl)‐2‐nitroethene), and electron‐poor itaconic anhydride (=2‐methylidenesuccinic anhydride=2‐methylidenebutanedioic anhydride) in aqueous EtOH is reported. This protocol has the advantages of easiness, higher yields, and shorter reaction times. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 2).     

A New Class of Remote N‐Heterocyclic Carbenes with Exceptionally Strong σ‐Donor Properties: Introducing Benzo[c]quinolin‐6‐ylidene

We make the case for benzo[c]quinolin‐6‐ylidene ( 1 ) as a strongly electron‐donating carbene ligand. The facile synthesis of 6‐trifluoromethanesulfonylbenzo[c]quinolizinium trifluoromethanesulfonate ( 2 ) gives straightforward access to a useful precursor for oxidative addition to low‐valent metals, to yield the desired carbene complexes. This concept has been achieved in the case of [Mn(benzo[c]quinolin‐6‐ylidene)(CO)₅]⁺ ( 15 ) and [Pd(benzo[c]quinolin‐6‐ylidene)(PPh₃)₂(L)]²⁺ L=THF ( 21 ), OTf ( 22 ) or pyridine ( 23 ). Attempts to coordinate to nickel result in coupling products from two carbene precursor fragments. The CO IR‐stretching‐frequency data for the manganese compound suggests benzo[c]quinolin‐6‐ylidene is at least as strong a donor as any heteroatom‐stabilised carbene ligand reported.     

Catalytic activities in direct arylation of novel palladium N‐heterocyclic carbene complexes

Eight novel palladium N‐heterocyclic carbene (Pd‐NHC) complexes were synthesized by the reaction of chloro 1,3‐dialkylbenzimidazolin‐2‐ylidene silver(I) complexes with bis(benzonitrile)palladium(II) chloride in dichloromethane. These eight Pd‐NHC complexes are as follows: bis[1‐phenyl‐3‐(2,4,6‐trimethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(2,3,5,6‐tetramethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(2,3,4,5,6‐pentamethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(3,4,5‐trimethoxybenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐diethylaminoethyl)‐3‐(3‐methylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐diethylaminoethyl)‐3‐(2,3,5,6‐tetramethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐morpholinoethyl)‐3‐naphthalenomethylbenzimidazol‐2‐ylidene]dichloropalladium(II) and bis[1‐(2‐morpholinoethyl)‐3‐(2‐methylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II). Also, these synthesized complexes were fully characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopic methods and elemental analysis techniques. These synthesized novel Pd‐NHC complexes were tested as catalysts in the direct arylation of 2‐n‐butylthiophene, 2‐n‐butylfuran and 2‐isopropylthiazole with various aryl bromides at 130°C for 1 h. The complexes showed very good catalytic activities in these reactions. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of 2,5,7‐Triaryl‐4,7(6,7)‐dihydropyrazolo[1,5‐a]pyrimidine‐3‐carbonitriles by Reaction of 5(3)‐Amino‐3(5)‐aryl‐1H‐pyrazole‐4‐carbonitriles with Chalcones

The reaction of 5(3)‐amino‐3(5)‐aryl‐1H‐pyrazole‐4‐carbonitriles with 1,3‐diaryl‐2‐propen‐1‐ones (chalcones) in refluxing DMF leads to 2,5,7‐triaryl‐4,7(6,7)‐dihydropyrazolo[1,5‐a]pyrimidine‐3‐carbonitriles. In DMSO solution, the latter exist in equilibrium of two tautomeric 4,7‐dihydropyrazolo[1,5‐a]pyrimidines and 6,7‐dihydropyrazolo[1,5‐a]pyrimidines in various ratios, depending on the nature of aryl substituents in chalcone building blocks.     

Regio‐ and Site Selectivity in the Reactions of Hydrazonoyl Chlorides with 3‐substituted Indolin‐2‐one Derivatives

The reaction of 3‐(3‐amino‐5‐oxo‐1,5‐dihydropyrazol‐4‐ylidene)‐1,3‐dihydroindol‐2‐one with N‐aryl‐2‐oxopropane hydrazonoyl chlorides in dioxane in the presence of triethylamine proceeded regio‐ and site selectively to give 3‐(2‐arylazo‐3‐methyl‐6‐oxo‐imidazo[1,2‐b ]pyrazol‐7‐ylidene‐indol‐2‐ones rather than the isomeric form 3‐(3‐arylazo‐2‐methyl‐6‐oxo‐imidazo[1,2‐b ]pyrazol‐7‐ylidene‐indol‐2‐ones. On the other hand, the reaction of N ’‐(2‐oxoindoline‐3‐ylidene)hydrazinecarbothiohydrazide with hydrazonoyl chlorides in refluxing ethanol and in the presence of triethylamine proceeded regio‐ and site selectively to give the respective 3‐(substituted‐1,3,4‐thiadiazol‐2‐ylidenehydrazono)indolin‐2‐ones. The mechanism of formation of the new products was also discussed. The structure assigned for the products was established by elemental and spectral data (¹H‐NMR, IR, and Mass) and NOE experiment. Moreover, the biological activity of the products was evaluated against some fungi and bacteria, and the results obtained revealed the high potency of some of them compared with the used standard references.     

First Synthesis of Double Headed 1,2,4‐Triazino[5,6‐b]indole Acyclo C‐Nucleosides

Heterocyclization of bis(2‐oxo‐indol‐3‐ylidene)‐galactaric acid hydrazide ( 3 ) with a variety of one‐nitrogen cyclizing agents gave the corresponding 1,4‐bis{1,2,4‐triazino[5,6‐b]indol‐3‐yl}‐galacto‐tetritols 4–8 . Acetylation of the latter double headed acyclo C‐nucleosides with acetic anhydride in the presence of pyridine at ambient temperature resulted in N‐ and O‐acetylation to give the corresponding 1,2,3,4‐tetra‐O‐acetyl‐1,4‐bis{1,2,4‐triazino[5,6‐b]indol‐3‐yl}‐galacto‐tetritols 9–13 which were found to exist in centro‐symmetric zigzag conformations 20 . The assigned structures were corroborated by ¹H, ¹³C NMR as well as mass spectra.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

One‐Pot,Pseudo‐Five‐Component Synthesis of Bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones]

Synthesis and characterization of bis[2‐(arylimino)‐1,3‐thiazolidin‐4‐ones] are described. The one‐pot, pseudo‐five‐component reaction of an aliphatic diamine, isothiocyanatobenzene, and dialkyl but‐2‐ynedioate at room temperature in anhydrous CH₂Cl₂ gives the title compound in relatively high yield. Under the same conditions, aromatic 1,2‐diamines yield 2‐(arylimino)‐N‐(enaminoaryl)‐1,3‐thiazolidin‐4‐ones in a pseudo‐four‐component reaction. Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).