Octanol/water partitioning simulation by RP‐HPLC for structurally diverse acidic drugs: Comparison of three columns in the presence and absence of n‐octanol as the mobile phase additive

The advantageous effect of n‐octanol as a mobile phase additive for lipophilicity assessment of structurally diverse acidic drugs both in the neutral and ionized form was explored. Two RP C₁₈ columns, ABZ⁺ and Aquasil, were used for the determination of logk_w indices, and the results were compared with those previously reported on a base‐deactivated silica column. At pH 2.5, the use of n‐octanol‐saturated buffer as the mobile phase aqueous component led to high‐quality 1:1 correlation between logk_w and logP for the ABZ⁺ column, while inferior statistics were obtained for Aquasil. At physiological pH, the correlations were significantly improved if strongly ionized acidic drugs were treated separately from weakly ionized ones. In the latter case, 1:1 correlations between logD_7.4 and logk_w^oct indices were obtained in the presence of 0.25% n‐octanol. Concerning strongly ionized compounds, adequate correlations were established under the same conditions; however, slopes were significantly lower than unity, while large negative intercepts were obtained. According to the absolute difference (diff = logD_7.4–logk_w) pattern, base‐deactivated silica showed a better performance than ABZ⁺, however, the latter seems more efficient for the lipophilicity assessment of highly lipophilic acidic compounds. Aquasil may be the column of choice if logD_7.4<3 with the limitation, however, that very hydrophilic compounds cannot be measured.     

1‐Octanol/Water Partition Coefficients of 1Alkyl‐3‐methylimidazolium Chloride

The solubilities of 1alkyl‐3‐methylimidazolium chloride, [C_nmim][Cl], where n=4, 8, 10, and 12, in 1octanol and water have been measured by a dynamic method in the temperature range from 270 to 370 K. The solubility data was used to calculate the 1octanol/water partition coefficients as a function of temperature and alkyl substituent. The melting point, enthalpies of fusion, and enthalpies of solid–solid phase transitions were determined by differential scanning calorimetry, DSC. The solubility of [C_nmim][Cl], where n=10 or 12 in 1octanol is comparable and higher than that of [C₄mim][Cl] in 1octanol. Liquid 1n‐octyl‐3‐methylimidazolium chloride, [C₈mim][Cl], is not miscible with 1octanol and water, consequently, the liquid–liquid equilibrium, LLE was measured in this system. The differences between the solubilities in water for n=4 and 12 are shown only in α₁ and γ₁ solid crystalline phases. Additionally, the immiscibility region was observed for the higher concentration of [C₁₀mim][Cl] in water. The intermolecular solute–solvent interaction of 1butyl‐3‐methylimidazolium chloride with water is higher than for other 1alkyl‐3‐methylimidazolium chlorides. The data was correlated by means of the UNIQUAC ASM and two modified NRTL equations utilizing parameters derived from the solid–liquid equilibrium, SLE. The root‐mean‐square deviations of the solubility temperatures for all calculated data are from 1.8 to 7 K and depend on the particular equation used. In the calculations, the existence of two solid–solid first‐order phase transitions in [C₁₂mim][Cl] has also been taken into consideration. Experimental partition coefficients (log P) are negative at three temperatures; this is evidence for the possible use of these ionic liquids as green solvents.     

Molecular Structure,Vibrational Spectra,and Hydrogen Bonding of the Ionic Liquid 1‐Ethyl‐3‐methyl‐1H‐imidazolium Tetrafluoroborate

The IR and Raman spectra and conformations of the ionic liquid 1‐ethyl‐3‐methyl‐1H‐imidazolium tetrafluoroborate, [EMIM] [BF₄] ( 6 ), were analyzed within the framework of scaled quantum mechanics (SQM). It was shown that SQM successfully reproduced the spectra of the ionic liquid. The computations revealed that normal modes of the EMIM⁺?BF ion pair closely resemble those of the isolated ions EMIM⁺ and BF , except for the antisymmetric BF stretching vibrations of the anion, and the out‐of‐plane and stretching vibrations of the H? C(2) moiety of the cation. The most plausible explanation for the pronounced changes of the latter vibrations upon ion‐pair formation is the H‐bonding between H? C(2) and BF . However, these weak H‐bonds are of minor importance compared with the Coulomb interactions between the ions that keep them closely associated even in dilute CD₂Cl₂ solutions. According to the ‘gas‐phase’ computations, in these associates, the BF anion is positioned over the imidazolium ring of the EMIM⁺ cation and has short contacts not only with the H? C(2) of the latter, but also with a proton of the Me? N(3) group.     

Determination of the n‐octanol/water partition coefficients of weakly ionizable basic compounds by reversed‐phase high‐performance liquid chromatography with neutral model compounds

A strategy to utilize neutral model compounds for lipophilicity measurement of ionizable basic compounds by reversed‐phase high‐performance liquid chromatography is proposed in this paper. The applicability of the novel protocol was justified by theoretical derivation. Meanwhile, the linear relationships between logarithm of apparent n‐octanol/water partition coefficients (logK_ow′′) and logarithm of retention factors corresponding to the 100% aqueous fraction of mobile phase (logk_w) were established for a basic training set, a neutral training set and a mixed training set of these two. As proved in theory, the good linearity and external validation results indicated that the logK_ow′′–logk_w relationships obtained from a neutral model training set were always reliable regardless of mobile phase pH. Afterwards, the above relationships were adopted to determine the logK_ow of harmaline, a weakly dissociable alkaloid. As far as we know, this is the first report on experimental logK_ow data for harmaline (logK_ow = 2.28 ± 0.08). Introducing neutral compounds into a basic model training set or using neutral model compounds alone is recommended to measure the lipophilicity of weakly ionizable basic compounds especially those with high hydrophobicity for the advantages of more suitable model compound choices and convenient mobile phase pH control.     

两类三组份反应产物：1,3-恶嗪及嘧啶-2-酮类化合物的质谱学行为研究

电喷雾质谱被应用于分辨2-氨基-1,3-恶嗪及六氢化-4-苯基-吡喃[2,3-d]嘧啶-2-酮的杂环结构。两类化合物均为三组份反应的产物,且其杂环的结构很难用NMR判断。实验首次系统研究了两类化合物的质谱学行为（包括氘代实验和高分辨质谱研究）,发现前者在CID实验中丢失CH2N2和HCNO,而后者为直接丢失尿素。这些特征丢失为该类衍生物的结构判断,尤其是高通量的合成产物分析提供了重要的依据。     

Enzymatic ring‐opening polymerization of ε‐caprolactone by Yarrowia lipolytica lipase in ionic liquids

Yarrowia lipolytica (YLL), Candida rugosa (CRL), and porcine pancreatic lipase (PPL) were employed successfully as catalysts in the enzymatic ring‐opening polymerization (ROP) of ε‐caprolactone in the presence of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF₄]), 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIM][BF₄]), 1‐butylpyridinium tetrafluoroborate ([BuPy][BF₄]), 1‐butylpyridinium trifluoroacetate ([BuPy][CF₃COO]), 1‐ethyl‐3‐methylimidazolium nitrate ([EMIM][NO₃]) ionic liquids. Poly(ε‐caprolactone)s (PCLs) with molecular weights (M_n) in the range of 300–9000 Da were obtained. ¹H‐ and ¹³C‐NMR analyses on PCLs formed by YLL, CRL, and PPL showed asymmetric telechelic α‐hydroxy‐ω‐carboxylic acid end groups. Differences between CP‐MAS and MAS spectra are observed and discussed in terms of morphology. MALDI‐TOF spectra show the formation of at least seven species. Differential scanning calorimetry (DSC) and Wide Angle X‐Ray Scattering (WAXS) results demonstrate the high degree of crystallinity present in all the polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5792–5805, 2009     

Study of enrichment factors for six β‐blockers in aliphatic alcohols by hollow‐fiber liquid‐phase microextraction

The selectivity of a suitable organic solvent is key for extraction in liquid‐phase microextraction experiments. Nevertheless, the screening process remains a daunting task. Our research aimed to study the relationship between extraction efficiency and extraction solvents, analytes, and finally select the appropriate extraction solvent. In the present article, β‐blockers and six extraction solvents were chosen as the models and hollow‐fiber liquid‐phase microextraction was conducted. The relationship was built by statistical analysis on the data. Factors affecting extraction efficiency including the logarithms of the octanol/water partition coefficient (logP_o/w) of analytes, acid dissociation constants, the logarithms of the octanol/water partition coefficient of solvents and pH of the sample solution were investigated. The results showed that a low water solubility of extraction solvent is the foundation to ensure higher extraction efficiency. Moreover, when ΔlogP_o/w > 0, a higher extraction efficiency is observed at lower ΔlogP_o/w, on the contrary, when ΔlogP_o/w < 0, extraction efficiency is higher as the absolute value of ΔlogP_o/w becomes greater. Finally, the relationship between enrichment factor and extraction solvents, analytes was established and a helpful guidance was provided for the selection of an optimal solvent to obtain the best extraction efficiency by liquid‐phase microextraction.     

Simultaneous Determination Baicalin and Forsythin in Shuanghuanglian Oral Liquid by HPLC/DAD and LC‐ESI‐MS

Rapid, simple and reliable HPLC/DAD and LC‐ESI‐MS methods for the simultaneous determination of baicalin and forsythin in the traditional Chinese medicinal preparation Shuanghuanglian oral liquid were described and validated. The separation condition for HPLC/DAD was optimized using a BDS hypersil C18 column (Thermo, 2.1 × 150 mm, particle size 5 μm) by gradient elution using methanol‐0.2 % ammonium acetate as the mobile phase. The suitable detection wavelength was set at 277 nm for the quantitative analysis of baicalin and forsythin in this method. Some operational parameters of the ESI interface were optimized, negative m/z 445[M?H]^? for baicalin and negative m/z 593[M+CH₃COO]^? for forsythin, positive m/z 447[M+H]⁺ for baicalin and positive m/z 552[M+NH 4]⁺ for forsythin, respectively. These HPLC/DAD and LC‐ESI‐MS methods were validated in terms of recovery, linearity, accuracy and precision (intra‐ and inter‐day validation). These methods can be used as a complementary method for the commercial quality control of Shuanghuanglian oral liquid and its pharmaceutical preparations.     

Synthesis and Characterization of New 3‐(3‐Hydroxyphenyl)‐4‐ alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione Compounds

A series of 3‐(3‐hydroxyphenyl)‐4‐alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione compounds with general formula C_nH_2n+1CNO(CO)₂C₆H₄(C₆H₄OH) in which n are even parity numbers from 2 to 18. The structure determinations on these compounds were performed by FT‐IR spectroscopy which indicated that the terminal alkyl chain attached to the oxazepine ring was fully extended. Conformational analysis in DMSO at ambient temperature was carried out for the first time via high resolution ¹H NMR and ¹³C NMR spectroscopy.     

Characterization of N‐Boc/Fmoc/Z‐N′‐formyl‐gem‐diaminoalkyl derivatives using electrospray ionization multi‐stage mass spectrometry

N‐Boc/Fmoc/Z‐N′‐formyl‐gem‐diaminoalkyl derivatives, intermediates particularly useful in the synthesis of partially modified retro‐inverso peptides, have been characterized by both positive and negative ion electrospray ionization (ESI) ion‐trap multi‐stage mass spectrometry (MSⁿ). The MS² collision induced dissociation (CID) spectra of the sodium adduct of the formamides derived from the corresponding N‐Fmoc/Z‐amino acids, dipeptide and tripeptide acids show the [M + Na‐NH₂CHO]⁺ ion, arising from the loss of formamide, as the base peak. Differently, the MS² CID spectra of [M + Na]⁺ ion of all the N‐Boc derivatives yield the abundant [M + Na‐C₄H₈]⁺ and [M + Na‐Boc + H]⁺ ions because of the loss of isobutylene and CO₂ from the Boc protecting function. Useful information on the type of amino acids and their sequence in the N‐protected dipeptidyl and tripeptidyl‐N′‐formamides is provided by MS² and subsequent MSⁿ experiments on the respective precursor ions. The negative ion ESI mass spectra of these oligomers show, in addition to [M‐H]^?, [M + HCOO]^? and [M + Cl]^? ions, the presence of in‐source CID fragment ions deriving from the involvement of the N‐protecting group. Furthermore, MSⁿ spectra of [M + Cl]^? ion of N‐protected dipeptide and tripeptide derivatives show characteristic fragmentations that are useful for determining the nature of the C‐terminal gem‐diamino residue. The present paper represents an initial attempt to study the ESI‐MS behavior of these important intermediates and lays the groundwork for structural‐based studies on more complex partially modified retro‐inverso peptides. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and application of a chiral ionic liquid functionalized β‐cyclodextrin as a chiral selector in capillary electrophoresis

A novel chiral ionic liquid functionalized β‐cyclodextrin, 6‐O‐2‐hydroxpropyltrimethylammonium‐β‐cyclodextrin tetrafluoroborate ([HPTMA‐β‐CD][BF₄]), was synthesized and used as a chiral selector in capillary electrophoresis. [HPTMA‐β‐CD][BF₄] not only increased the solubility in aqueous buffer in comparison with the parent compound, but also provided a stable reversal electroosmotic flow, and the enantioseparation of eight chiral drugs was examined in phosphate buffer containing [HPTMA‐β‐CD][BF₄] as the chiral selector. The effects of the [HPTMA‐β‐CD][BF₄] concentration and the background electrolyte pH were studied. Moreover, the chiral separation abilities of β‐CD and [HPTMA‐β‐CD][BF₄] were compared and possible mechanisms for the chiral recognition of [HPTMA‐β‐CD][BF₄] are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Four‐Center Oxidation State Combinations and Near‐Infrared Absorption in [Ru(pap)(Q)2]n (Q=3,5‐Di‐tert‐butyl‐N‐aryl‐1,2‐benzoquinonemonoimine,pap=2‐Phenylazopyridine)

The complex series [Ru(pap)(Q)₂]ⁿ ([ 1 ]ⁿ–[ 4 ]ⁿ; n=+2, +1, 0, ?1, ?2) contains four redox non‐innocent entities: one ruthenium ion, 2‐phenylazopyridine (pap), and two o‐iminoquinone moieties, Q=3,5‐di‐tert‐butyl‐N‐aryl‐1,2‐benzoquinonemonoimine (aryl=C₆H₅ ( 1⁺ ); m‐(Cl)₂C₆H₃ ( 2⁺ ); m‐(OCH₃)₂C₆H₃ ( 3⁺ ); m‐(tBu)₂C₆H₃ ( 4 ⁺)). A crystal structure determination of the representative compound, [ 1 ]ClO₄, established the crystallization of the ctt‐isomeric form, that is, cis and trans with respect to the mutual orientations of O and N donors of two Q ligands, and the coordinating azo N atom trans to the O donor of Q. The sensitive C? O (average: 1.299(3) Å), C? N (average: 1.346(4) Å) and intra‐ring C? C (meta; average: 1.373(4) Å) bond lengths of the coordinated iminoquinone moieties in corroboration with the N?N length (1.292(3) Å) of pap in 1 ⁺ establish [Ru^III(pap⁰)(Q^.?)₂]⁺ as the most appropriate electronic structural form. The coupling of three spins from one low‐spin ruthenium(III) (t_2g⁵) and two Q^.? radicals in 1 ⁺– 4 ⁺ gives a ground state with one unpaired electron on Q^.?, as evident from g=1.995 radical‐type EPR signals for 1 ⁺– 4 ⁺. Accordingly, the DFT‐calculated Mulliken spin densities of 1 ⁺ (1.152 for two Q, Ru: ?0.179, pap: 0.031) confirm Q‐based spin. Complex ions 1 ⁺– 4 ⁺ exhibit two near‐IR absorption bands at about λ=2000 and 920 nm in addition to intense multiple transitions covering the visible to UV regions; compounds [ 1 ]ClO₄–[ 4 ]ClO₄ undergo one oxidation and three separate reduction processes within ±2.0 V versus SCE. The crystal structure of the neutral (one‐electron reduced) state ( 2 ) was determined to show metal‐based reduction and an EPR signal at g=1.996. The electronic transitions of the complexes 1 ⁿ– 4 ⁿ (n=+2, +1, 0, ?1, ?2) in the UV, visible, and NIR regions, as determined by using spectroelectrochemistry, have been analyzed by TD‐DFT calculations and reveal significant low‐energy absorbance (λ_max>1000 nm) for cations, anions, and neutral forms. The experimental studies in combination with DFT calculations suggest the dominant valence configurations of 1 ⁿ– 4 ⁿ in the accessible redox states to be [Ru^III(pap⁰)(Q^.?)(Q⁰)]²⁺ ( 1 ²⁺– 4 ²⁺)→[Ru^III(pap⁰)(Q^.?)₂]⁺ ( 1 ⁺– 4 ⁺)→[Ru^II(pap⁰)(Q^.?)₂] ( 1 – 4 )→[Ru^II(pap^.?)(Q^.?)₂]^? ( 1 ^?– 4 ^?)→[Ru^III(pap^.?)(Q^2?)₂]^2? ( 1 ^2?– 4 ^2?).     

Zwei Tetrachlorothiotantalate: [Na‐15‐Krone‐5][TaSCl4 · Dioxan] und [Na‐15‐Krone‐5]2[(TaSCl4)2Dioxan] · S8

Two Tetrachlorothiotantalates: [Na‐15‐crown‐5][TaSCl₄ · dioxane] and [Na‐15‐crown‐5]₂[(TaSCl₄)₂dioxane] · S₈ During the reaction of Na₂S₄, TaCl₅ and 15‐crown‐5 in dichloromethane the crown ether partly suffers degradation to 1,4‐dioxane. Aside from sulfur, [Na‐15‐crown‐5][TaSCl₄ · dioxane] was the first product obtained. It crystallizes in the monoclinic space group P2₁/n with a = 1066.1, b = 1781.3, c = 1258.3 pm, β = 97.14°, Z = 4. In the [TaSCl₄ · dioxane]^– ion a dioxane molecule is loosely bonded to a square‐pyramidal TaSCl₄^– unit; two chlorine atoms are in contact with an Na⁺ ion. Upon standing with the mother liquor [Na‐15‐crown‐5]₂[(TaSCl₄)₂dioxane] · S₈ was formed. It crystallizes in the monoclinic space group C2/m; a = 1768.5, b = 1084.0, c = 1517.3 pm, β = 118.46°, Z = 4. In this case a dioxane molecule is coordinated with two TaSCl₄^– units. The [(TaSCl₄)₂ · dioxane]^2– ions and S₈ molecules alternate in the stacking direction b.     

离子液体中13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽5,7,12,14(13H)-四酮衍生物的绿色高效合成

在离子液体[bmim+][BF4-]中高产率的合成了一系列13-芳基-5,7,12,14-四氢二苯并[b, i]氧杂蒽-5,7,12,14(13H)-四酮类化合物。该反应操作步骤简单,离子液体易于与产物分离,并且离子液体可以循环使用。     

Supramolecular architectures of succinates of 1‐hydroxypropan‐2‐aminium derivatives

Aminoalkanol and aroxyalkyl derivatives are known as potential anticonvulsants. Two new salts, namely bis{(R,S)‐N‐[2‐(2,6‐dimethylphenoxy)ethyl]‐1‐hydroxypropan‐2‐aminium} succinate ( 1s ), C₁₃H₂₂NO₂⁺·0.5C₄H₄O₄²⁻, and bis{(S)‐(+)‐N‐[2‐(2,6‐dimethylphenoxy)ethyl]‐1‐hydroxypropan‐2‐aminium} succinate ( 2s ), C₁₃H₂₂NO₂⁺·0.5C₄H₄O₄²⁻, have been prepared and characterized by single‐crystal X‐ray diffraction. The N atoms are protonated by proton transfer from succinic acid. Salt 1s crystallizes in the space group P2₁/n with one cation and half an anion in the asymmetric unit across an inversion centre, while ( 2s ) crystallizes in the space group P2₁ with four cations and two anions in the asymmetric unit. The hydroxy group of the cation of 1s is observed in two R/S disorder positions. The crystals of these two salts display similar supramolecular architectures (i.e. two‐dimensional networks), built mainly by intermolecular N⁺—H…O^δ− and O—H…O^δ− hydrogen bonds, where `δ−' represents a partial charge. The succinate anions are engaged in hydrogen bonds, not only with protonated N atoms, but also with hydroxy groups.     

The ESI CAD fragmentations of protonated 2,4,6‐tris(benzylamino)‐ and tris(benzyloxy)‐1,3,5‐triazines involve benzyl–benzyl interactions: a DFT study

The electrospray ionization collisionally activated dissociation (CAD) mass spectra of protonated 2,4,6‐tris(benzylamino)‐1,3,5‐triazine (1) and 2,4,6‐tris(benzyloxy)‐1,3,5‐triazine (6) show abundant product ion of m/z 181 (C₁₄H₁₃⁺). The likely structure for C₁₄H₁₃⁺ is α‐[2‐methylphenyl]benzyl cation, indicating that one of the benzyl groups must migrate to another prior to dissociation of the protonated molecule. The collision energy is high for the ‘N’ analog (1) but low for the ‘O’ analog (6) indicating that the fragmentation processes of 1 requires high energy. The other major fragmentations are [M + H‐toluene]⁺ and [M + H‐benzene]⁺ for compounds 1 and 6, respectively. The protonated 2,4,6‐tris(4‐methylbenzylamino)‐1,3,5‐triazine (4) exhibits competitive eliminations of p‐xylene and 3,6‐dimethylenecyclohexa‐1,4‐diene. Moreover, protonated 2,4,6‐tris(1‐phenylethylamino)‐1,3,5‐triazine (5) dissociates via three successive losses of styrene. Density functional theory (DFT) calculations indicate that an ion/neutral complex (INC) between benzyl cation and the rest of the molecule is unstable, but the protonated molecules of 1 and 6 rearrange to an intermediate by the migration of a benzyl group to the ring ‘N’. Subsequent shift of a second benzyl group generates an INC for the protonated molecule of 1 and its product ions can be explained from this intermediate. The shift of a second benzyl group to the ring carbon of the first benzyl group followed by an H‐shift from ring carbon to ‘O’ generates the key intermediate for the formation of the ion of m/z 181 from the protonated molecule of 6. The proposed mechanisms are supported by high resolution mass spectrometry data, deuterium‐labeling and CAD experiments combined with DFT calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Coordination chemistry of organometallic polydentate ligand Reactive chemistry of the tridentate ligand trans‐Fe(Ph2PQu‐P)2‐(CO)3 [PhzPQu=2‐diphenyl‐phosphino‐4‐methylquinoline] and molecular structure of [Fe(CO)3(μ‐Ph2PQu)2HgI]+ [HgI3]

Reaction of a new type of bidentate ligand PhPQu [PhPQu = 2‐diphenylphosphino‐4‐methylquinoline] with Fe(CO)₅ in butanol gave trans‐Fe(FpPQu‐P)(CO)₃ (1). Compound 1, which can act as a neutral tridentate organometallic ligand, was reacted with I B, II B metal compounds and a rhodium complex to give six binuclear complexes with Fe? M bonds, Fe(CO)₃ (μ‐Ph₂PQu)MX_n (2–7) [M= Zn(II), Cd(II), Hg(II), Cu(I), Ag(I), Rh(I)], and an ion‐pair complex [Fe(CO)₃ (μ‐Ph₂PQu)₂HgI][HgI₃]^? (8). The structure of 8 was determined by X‐ray crystallography. Complex 8 crystallizes in the space group P‐1 with a = 1.0758(3), b = 1.6210(4), c=1.7155(4)nm; a=75.60(2), β=71.81(2), γ=81.78(2)° and Z = 2 and its structure was refined to give agreement factors of R=0.050 and R_w = 0.057. The Fe‐Hg bond distance is 0.2536nm.     

Synthesis of 2‐Phenylthiazoles from α‐Tosyloxyketones and Thiobenzamide in [Bmim][PF6] Ionic Liquid at Ambient Temperature

The room temperature ionic liquid, 1‐n‐butyl‐3‐methylimidazolium hexafluorophosphate [bmim][PF₆] is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with thiobenzamide to prepare 2‐phenylthiazoles in good yields.     

Soluble alkyl substituted poly(3,4‐propylenedioxyselenophene)s: A new platform for optoelectronic materials

Optical and electrochemical properties of regiosymmetric and soluble alkylenedioxyselenophene‐based electrochromic polymers, namely poly(3,3‐dibutyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₄), poly(3,3‐dihexyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₆), and poly(3,3‐didecyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₁₀), are highlighted. It is noted that these unique polymers have low bandgaps (1.57–1.65 eV), and they are exceptionally stable under ambient atmospheric conditions. Polymer films retained 82–97% of their electroactivity after 5000 cycles. The percent transmittance of PProDOS‐C_n (n = 4, 6, 10) films found to be between 55 and 59%. Furthermore, these novel soluble PProDOS‐C_n polymers showed electrochromic behavior: a color change form pure blue to highly transparent state in a low switching time (1.0 s) during oxidation with high coloration efficiencies (328–864 cm² C^?1) when compared to their thiophene analogues. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Gas‐phase dissociation of ionic liquid aggregates studied by electrospray ionisation mass spectrometry and energy‐variable collision induced dissociation

Positive singly charged ionic liquid aggregates [(C_nmim)_m+1(BF₄)_m]⁺ (mim = 3‐methylimidazolium; n = 2, 4, 8 and 10) and [(C₄mim)_m+1(A)_m]⁺ (A = Cl⁻, BF₄⁻, PF₆⁻, CF₃SO₃⁻ and (CF₃SO₂)₂N⁻) were investigated by electrospray ionisation mass spectrometry and energy‐variable collision induced dissociation. The electrospray ionisation mass spectra (ESI‐MS) showed the formation of an aggregate with extra stability for m = 4 for all the ionic liquids with the exception of [C₄mim][CF₃SO₃]. ESI‐MS‐MS and breakdown curves of aggregate ions showed that their dissociation occurred by loss of neutral species ([C_nmim][A])_a with a ≥ 1. Variable‐energy collision induced dissociation of each aggregate from m = 1 to m = 8 for all the ionic liquids studied enabled the determination of E_{cm, 1/2} values, whose variation with m showed that the monomers were always kinetically much more stable than the larger aggregates, independently of the nature of cation and anion. The centre‐of‐mass energy values correlate well with literature data on ionic volumes and interaction and hydrogen bond energies. Copyright © 2008 John Wiley & Sons, Ltd.