Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

Transesterification Kinetics Investigation of R‐Substituted Phenyl Benzoates with 4‐Methoxyphenol in the Presence of K2CO3 in DMF

Transesterification of R‐substituted phenyl benzoates 1–5 with 4‐methoxyphenol 6 was kinetically investigated in the presence of K₂CO₃ in dimethylformamide (DMF) at various temperatures. The Hammett plots for the reactions of the 1–5 demonstrate good linear correlations with σ⁰ constants. Low magnitude of ρ_LG values indicate that the leaving group departure occurs after the rate‐determining step. The Brønsted coefficient values for the reactions (?0.2, ?0.16, ?0.13 at 15, 24, 36°C, respectively) demonstrate the weak effect of leaving group substituent on the reactivity of R‐substituted phenyl benzoates 1–5 for the reactions with 4‐methoxyphenol 6 in the presence of K₂CO₃ in DMF. The leaving group substituent effect on free energy (ΔG^≠), enthalpy (ΔH^≠), and entropy (ΔS^≠) of activation was examined. It was shown that the activation parameters obtained depend weakly on the leaving group substituent effect. The reaction is entropy controlled in case the leaving group substituent becomes electron withdrawing.     

The hydroxyl radical reaction rate constant and products of 3,5‐dimethyl‐1‐hexyn‐3‐ol

A bimolecular rate constant,k_DHO, of (29 ± 9) × 10^?12 cm³ molecule^?1 s^?1 was measured using the relative rate technique for the reaction of the hydroxyl radical (OH) with 3,5‐dimethyl‐1‐hexyn‐3‐ol (DHO, HC?CC(OH)(CH₃)CH₂CH(CH₃)₂) at (297 ± 3) K and 1 atm total pressure. To more clearly define DHO's indoor environment degradation mechanism, the products of the DHO + OH reaction were also investigated. The positively identified DHO/OH reaction products were acetone ((CH₃)₂C?O), 3‐butyne‐2‐one (3B2O, HC?CC(?O)(CH₃)), 2‐methyl‐propanal (2MP, H(O?)CCH(CH₃)₂), 4‐methyl‐2‐pentanone (MIBK, CH₃C(?O)CH₂CH(CH₃)₂), ethanedial (GLY, HC(?O)C(?O)H), 2‐oxopropanal (MGLY, CH₃C(?O)C(?O)H), and 2,3‐butanedione (23BD, CH₃C(?O)C(?O)CH₃). The yields of 3B2O and MIBK from the DHO/OH reaction were (8.4 ± 0.3) and (26 ± 2)%, respectively. The use of derivatizing agents O‐(2,3,4,5,6‐pentalfluorobenzyl)hydroxylamine (PFBHA) and N,O‐bis(trimethylsilyl)trifluoroacetamide (BSTFA) clearly indicated that several other reaction products were formed. The elucidation of these other reaction products was facilitated by mass spectrometry of the derivatized reaction products coupled with plausible DHO/OH reaction mechanisms based on previously published volatile organic compound/OH gas‐phase reaction mechanisms. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 534–544, 2004     

Highly organosoluble and flexible polyimides with color lightness and transparency based on 2,2‐bis[4‐(2‐trifluoromethyl‐4‐aminophenoxy)‐3,5‐dimethylphenyl]propane

A new diamine containing isopropylidene, methyl substituted arylene ether, and trifluoromethyl groups, 2,2‐bis[4‐(2‐trifluoromethyl‐4‐aminophenoxy)‐3,5‐dimethylphenyl]propane (BTADP), was synthesized and used in preparation of a series of polyimides by direct polycondensation with various aromatic tetracarboxylic dianhydrides in N, N‐dimethylacetamide (DMAc). All polymers derived from diamine (BTADP) with trifluoromethyl substituents were highly organosoluble in the solvents, like N‐methyl‐2‐pyrrolidinone (NMP), N,N‐dimethylacetamide, N,N‐dimethylformamide (DMF), pyridine, chloroform, tetrahydrofuran (THF), dimethyl sulfoxide (DMSO), dichloromethane, cyclohexanone, and γ‐butyrolactone at room temperature or upon heating at 70 °C. Inherent viscosities of the polyimides were found to range between 0.58 and 0.97 dL·g^?1. These polyimides had glass transition temperatures between 256 and 307 °C, and their 10% mass loss temperatures ranged from 440 to 462 °C and 421 to 443 °C under nitrogen and air, respectively. These polyimides had low dielectric constants in the range of 2.84–3.09. All the polyimides could be cast into films from DMAc solutions and were thermally converted into color lightness, optically transparent, flexible, and tough polyimides. The polyimide films had a tensile strength in the range of 83–97 MPa and a tensile modulus in the range of 2.0–2.2 GPa. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5766–5774, 2004     

Synthesis and characterization of novel polyamide‐imides containing noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit

A new diimide‐dicarboxylic acid, 2,2′‐dimethyl‐4,4′‐bis(4‐trimellitimidophenoxy)biphenyl (DBTPB), containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by the condensation reaction of 2,2′‐dimethyl‐4,4′‐bis(4‐minophenoxy)biphenyl (DBAPB) with trimellitic anhydride in glacial acetic acid. A series of new polyamide‐imides were prepared by direct polycondensation of DBAPB and various aromatic diamines in N‐methyl‐2‐pyrrolidinone (NMP), using triphenyl phosphite and pyridine as condensing agents. The polymers were produced with high yield and moderate to high inherent viscosities of 0.86–1.33 dL · g⁻¹. Wide‐angle X‐ray diffractograms revealed that the polymers were amorphous. Most of the polymers exhibited good solubility and could be readily dissolved in various solvents such as NMP, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide (DMF), dimethyl sulfoxide, pyridine, cyclohexanone, and tetrahydrofuran. These polyamide‐imides had glass‐transition temperatures between 224–302 °C and 10% weight loss temperatures in the range of 501–563 °C in nitrogen atmosphere. The tough polymer films, obtained by casting from DMAc solution, had a tensile strength range of 93–115 MPa and a tensile modulus range of 2.0–2.3 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 63–70, 2001     

Thermolysis of 3‐alkyl‐3‐methyl‐1,2‐dioxetanes: activation parameters and chemiexcitation yields

3‐Methyl‐3‐(3‐pentyl)‐1,2‐dioxetane 1 and 3‐methyl‐3‐(2,2‐dimethyl‐1‐propyl)‐1,2‐dioxetane 2 were synthesized in low yield by the α‐bromohydroperoxide method. The activation parameters were determined by the chemiluminescence method (for 1 ΔH‡ = 25.0 ± 0.3 kcal/mol, ΔS‡ = −1.0 entropy unit (e.u.), ΔG‡ = 25.3 kcal/mol, k₁ (60°C) = 4.6 × 10⁻⁴s⁻¹; for 2 ΔH‡ = 24.2 ± 0.2 kcal/mol, ΔS‡ = −2.0 e.u., ΔG‡ = 24.9 kcal/mol, k₁ (60°C) = 9.2 × 10⁻⁴s⁻¹. Thermolysis of 1–2 produced excited carbonyl fragments (direct production of high yields of triplets relative to excited singlets) (chemiexcitation yields for 1: ϕ^T = 0.02, ϕ^S ≤ 0.0005; for 2: ϕ^T = 0.02, ϕ^S ≤ 0.0004). The results are discussed in relation to a diradical‐like mechanism. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:176–179, 2001     

1，1－二氨基2，2－二硝基乙烯（DADE）的热化学性质、热行为和热分解机理

The constant-volume combustion energy, △cU （DADE, s, 298.15 K）, the thermal behavior, and kinetics and mechanism of the exothermic decomposition reaction of 1,1-diamino-2,2-dinitroethylene （DADE） have been investigated by a precise rotating bomb calorimeter, TG-DTG, DSC, rapid-scan fourier transform infrared （RSFT-IR） spectroscopy and T-jump/FTIR, respectively. The value of △cHm （DADE, s, 298.15 K） was determined as （-8518.09±4.59） j·g^-1. Its standard enthalpy of combustion, △cU （DADE, s, 298.15 K）, and standard enthalpy of formation, △fHm （DADE, s, 298.15 K） were calculated to be （-1254.00±0.68） and （- 103.98±0.73） kJ·mol^-1, respectively The kinetic parameters （the apparent activation energy Ea and pre-exponential factor A） of the first exothermic decomposition reaction in a temperature-programmed mode obtained by Kissinger＇s method and Ozawa＇s method, were Ek=344.35 kJ·mol^-1, AR= 1034.50 S^-1 and Eo=335.32 kJ·mol^-1, respectively. The critical temperatures of thermal explosion of DADE were 206.98 and 207.08 ℃ by different methods. Information was obtained on its thermolysis detected by RSFT-IR and T-jump/FTIR.     

Kinetics of the Reaction between Aromatic Aldehydes and 1,5‐Diamino‐4,8‐Dihydroxypyridazino[4,5‐d]Pyridazine

Kinetic studies were performed to investigate the mechanism of Schiff base formation in the reaction between aromatic aldehydes and 1,5‐diamino‐4,8‐dihydroxypyridazino[4,5‐d]pyridazine (DDPP). The studies were conducted at different temperatures with ethanol as solvent and acetic acid as catalyst. It is proposed that the first step involves the reaction of the aldehyde with a solvated proton (i.e. specific acid catalysis). Depending on the acidity of the medium, free or mono‐protonated (DDPP) at tacks the carbonyl group to form a carbinol‐amine inter mediate which then de hydrates to form the product. Plot of ΔH^# versus ΔS^# for the reaction gave a good straight line with isokinetic temperature of 343.15 K. Good linear relationship was obtained from the plot of log k against σ° values. The rate law derived from the proposed mechanism is in agreement with the experimental data and observations. The effects of meta and para substituents of benzaldehyde toward reactivity have been studied.     

Radical polymerization of new functional monomer: Methacryloyl isocyanate containing 4‐chloro‐1‐phenol

New functional monomer methacryloyl isocyanate containing 4‐chloro‐1‐phenol (CPHMAI) was prepared on reaction of methacryloyl isocyanate (MAI) with 4‐chloro‐1‐phenol (CPH) at low temperature and was characterized with IR, ¹H, and ¹³C‐NMR spectra. Radical polymerization of CPHMAI was studied in terms of the rate of polymerization, solvent effect, copolymerization, and thermal properties. The rate of polymerization of CPHMAI has been found to be smaller than that of styrene under the same conditions. Polar solvents such as dimethylsulfoxide (DMSO) and N,N‐dimethyl formamide (DMF) were found to slow the polymerization. Copolymerization of CPHMAI (M₁) with styrene (M₂) in tetrahydrofuran (THF) was studied at 60°C. The monomer reactivity ratio was calculated to be r₁ = 0.49 and r₂ = 0.66 according to the method of Fineman—Ross. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 469–473, 2000     

Activation of the aromatic system by the SO2CF3 group: Kinetics study and structure–reactivity relationships

The rate constants for the reaction of 2,6‐bis(trifluoromethanesulfonyl)‐4‐nitroanisole with some substituted anilines have been measured by spectrophotometric methods in methanol at various temperatures. The data are consistent with the S_NAr mechanism. The effect of substituents on the rate of reaction has been examined. Good linear relationships were obtained from the plots of log k₁ against Hammett σ_para constants values at all temperature with negative ρ values (?1.68 to ?1.11). Activation parameters Δ^≠H varied from 41.6 to 54.3 kJ mol^?1 and Δ^≠S from ?142.7 to ?114.6 J mol^?1 K^?1. The δΔ^≠H and δΔ^≠S reaction constants were determined from the dependence of Δ^≠H and Δ^≠S activation parameters on the σ substituent constants, by analogy with the Hammett equation. A plot of Δ^≠H versus Δ^≠S for the reaction gave good straight line with 177°C isokinetic temperature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 203–210, 2010     

Ag(I)‐Catalyzed Chlorination of Linezolid during Water Treatment: Kinetics and Mechanism

The kinetic and mechanistic study of Ag(I)‐catalyzed chlorination of linezolid (LNZ) by free available chlorine (FAC) was investigated at environmentally relevant pH 4.0–9.0. Apparent second‐order rate constants decreased with an increase in pH of the reaction mixture. The apparent second‐order rate constant for uncatalyzed reaction, e.g., k″_app = 8.15 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 0.076 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C and for Ag(I) catalyzed reaction total apparent second‐order rate constant, e.g., k″_app = 51.50 dm³ mol⁻¹ s⁻¹ at pH 4.0 and k″_app. = 1.03 dm³ mol⁻¹ s⁻¹ at pH 9.0 and 25 ± 0.2°C. The Ag(I) catalyst accelerates the reaction of LNZ with FAC by 10‐fold. A mechanism involving electrophilic halogenation has been proposed based on the kinetic data and LC/ESI/MS spectra. The influence of temperature on the rate of reaction was studied; the rate constants were found to increase with an increase in temperature. The thermodynamic activation parameters E_a, ΔH^#, ΔS^#, and ΔG^# were evaluated for the reaction and discussed. The influence of catalyst, initially added product, dielectric constant, and ionic strength on the rate of reaction was also investigated. The monochlorinated substituted product along with degraded one was formed by the reaction of LNZ with FAC.     

Diversification of ortho‐Fused Cycloocta‐2,5‐dien‐1‐one Cores and Eight‐ to Six‐Ring Conversion by σ Bond C−C Cleavage

Sequential treatment of 2‐C₆H₄Br(CHO) with LiC≡CR¹ (R¹=SiMe₃, tBu), nBuLi, CuBr?SMe₂ and HC≡CCHClR² [R²=Ph, 4‐CF₃Ph, 3‐CNPh, 4‐(MeO₂C)Ph] at ?50 °C leads to formation of an intermediate carbanion (Z)‐1,2‐C₆H₄{C_A(=O)C≡C_BR¹}{CH=CH(CH^?)R²} ( 4 ). Low temperatures (?50 °C) favour attack at C_B leading to kinetic formation of 6,8‐bicycles containing non‐classical C‐carbanion enolates ( 5 ). Higher temperatures (?10 °C to ambient) and electron‐deficient R² favour retro σ‐bond C?C cleavage regenerating 4 , which subsequently closes on C_A providing 6,6‐bicyclic alkoxides ( 6 ). Computational modelling (CBS‐QB3) indicated that both pathways are viable and of similar energies. Reaction of 6 with H⁺ gave 1,2‐dihydronaphthalen‐1‐ols, or under dehydrating conditions, 2‐aryl‐1‐alkynylnaphthlenes. Enolates 5 react in situ with: H₂O, D₂O, I₂, allylbromide, S₂Me₂, CO₂ and lead to the expected C ‐E derivatives (E=H, D, I, allyl, SMe, CO₂H) in 49–64 % yield directly from intermediate 5 . The parents (E=H; R¹=SiMe₃, tBu; R²=Ph) are versatile starting materials for NaBH₄ and Grignard C=O additions, desilylation (when R¹=SiMe) and oxime formation. The latter allows formation of 6,9‐bicyclics via Beckmann rearrangement. The 6,8‐ring iodides are suitable Suzuki precursors for Pd‐catalysed C?C coupling (81–87 %), whereas the carboxylic acids readily form amides under T3P® conditions (71–95 %).     

Ring‐opening polymerization of ϵ‐caprolactone by iodine charge‐transfer complex

The ring‐opening polymerization of ?‐caprolactone (?‐CL) catalyzed by iodine (I₂) was studied. The formation of a charge‐transfer complex (CTC) among triiodide, I, and ?‐CL was confirmed with ultraviolet–visible spectroscopy. The monomer ?‐CL was polymerized in bulk using I₂ as a catalyst to form the polyester having apparent weight‐average molecular weights of 35,900 and 45,500 at polymerization temperatures of 25 and 70 °C, respectively. The reactivity of both, ?‐CL monomer and ?‐CL:I₂ CTC, was interpreted by means of the potential energy surfaces determined by semiempirical computations (MNDO‐d). The results suggest that the formation of the ?‐CL:I₂ CTC leads to the ring opening of the ?‐CL structure with the lactone protonation and the formation of a highly polarized polymerization precursor (?‐CL)⁺. The band gaps approximated from an extrapolation of the oligomeric polycaprolactone (PCL) structures were computed. With semiempirical quantum chemical calculations, geometries and charge distributions of the protonated polymerization precursor (?‐CL)⁺ were obtained. The calculated band gap (highest occupied molecular orbit/lowest unoccupied molecular orbit differences) agrees with the experiment. The analysis of the oligomeric PCL isosurfaces indicate the existence of a weakly lone pair character of the C?O and C? O bonds suggesting a ?‐CL ring‐opening specificity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 714–722, 2002     

Single‐Electron Transfer in σ‐Complexation Reactions of 2,6‐Dimethoxy‐3,5‐dinitropyridine with Para‐X‐phenoxide Anions in Aqueous Solution

Second‐order rate constants have been measured spectrophotometrically for reactions of 2,6‐dimethoxy‐3,5‐dinitropyridine 1 with 4‐X‐substituted phenoxide anions (X = OMe, Me, H, Cl, and CN) 2a–e in aqueous solution at various temperatures. The effect of phenoxide substituents on the reaction rate was examined quantitatively on the basis of kinetic measurements, leading to nonlinear correlations of Δ^≠H and Δ^≠S with Hammett's substituent constants (σ). Each Hammett plots exhibits two intersecting straight lines for the reactions of 1 with the phenoxide anions 2a–e , whereas the Yukawa–Tsuno plots for the same reactions are linear. The large negative ρ values (?4.03 to ?3.80) obtained for the reactions of 1 with the phenoxide anions possessing an electron‐donating group supports the proposal that the reactions proceed through a single‐electron transfer mechanism.     

Kinetics and mechanism of the thermal decomposition reaction of acetone cyclic diperoxide in methyl tert‐butyl ether solution

The thermal decomposition reaction of acetone cyclic diperoxide (3,3,6,6‐tetramethyl‐1,2,4,5‐tetroxane, ACDP), in the temperature range of 130.0–166.0°C and initial concentrations range of 0.4–3.1 × 10^?2 mol kg^?1 has been studied in methyl t‐butyl ether solution. The thermolysis follows first‐order kinetic laws up to at least ca 60% ACDP conversion. Under the experimental conditions, the activation parameters of the initial step of the reaction (ΔH^# = 33.6 ± 1.1 kcal mol^?1; ΔS^# = ?4.1 ± 0.7 cal mol^?1 K^?1; ΔG^# = 35.0 ± 1.1 kcal mol^?1) and acetone, as the only organic product, support a stepwise reaction mechanism with the homolytic rupture of one of its peroxidic bond. Also, participation of solvent molecules in the reaction is postulated given an intermediate diradical, which further decomposes by C? O bond ruptures, yielding a stoichiometric amount of acetone (2 mol per mole of ACDP decomposed). The results are compared with those obtained for the above diperoxide thermolysis in other solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 302–307, 2004     

Preparation and StructuralCharacterization of RuII‐DMSO and RuIII‐DMSO‐substituted α‐Keggin‐type Phosphotungstates, [PW11O39RuIIDMSO]5– and [PW11O39RuIIIDMSO]4–, and Catalytic Activity for Water Oxidation

Ru^II‐ and Ru^III‐substituted α‐Keggin‐type phosphotungstates with a dimethyl sulfoxide (DMSO) ligand, [PW₁₁O₃₉Ru^IIDMSO]^5– ( 1 ) and [PW₁₁O₃₉Ru^IIIDMSO]^4– ( 2 ), were synthesized. Compound 1 was prepared by reaction of [PW₁₁O₃₉]^7– with [Ru^II(DMSO)₄]Cl₂ in water at 125 °C under hydrothermal conditions and was isolated as a cesium salt. Compound 2 was prepared by reaction of 1 with bromine in water at 60 °C and was isolated as a cesium salt. The compounds were characterized by cyclic voltammetry, elemental analysis, UV/Vis, IR,³¹P NMR, ¹⁸³W NMR, ¹H NMR, and XANES (Ru K‐edge and L₃‐edge)spectroscopic methods. Single crystal structural analysis of 1 revealed that Ru^II is incorporated in the α‐Keggin framework and coordinated by DMSO through a Ru–S bond. Cyclic voltammetry of 1 indicated that the incorporated Ru^II‐DMSO is reversibly oxidizable to the Ru^III‐DMSO derivative 2 . Compound 1 showed catalytic activity for water oxidation in the presence of cerium ammonium nitrate as an oxidant.     

Thermolysis of 3‐alkyl‐3‐methyl‐1,2‐dioxetanes: Activation parameters and chemiexcitation yields

3‐Methyl‐3‐(3‐pentyl)‐1,2‐dioxetane 1 and 3‐methyl‐3‐(2,2‐dimethyl‐1‐propyl)‐1,2‐dioxetane 2 were synthesized in low yield by the α‐bromohydroperoxide method. The activation parameters were determined by the chemiluminescence method (for 1 ΔH‡ = 25.0 ± 0.3 kcal/mol, ΔS‡ = −1.0 entropy unit (e.u.), ΔG‡ = 25.3 kcal/mol, k₁ (60°C) = 4.6 × 10⁻⁴s⁻¹; for 2 ΔH‡ = 24.2 ± 0.2 kcal/mol, ΔS‡ = −2.0 e.u., ΔG‡ = 24.9 kcal/mol, k₁ (60°C) = 9.2 × 10⁻⁴s⁻¹. Thermolysis of 1–2 produced excited carbonyl fragments (direct production of high yields of triplets relative to excited singlets) (chemiexcitation yields for 1: ϕ^T = 0.02, ϕ ≤ 0.0005; for 2: ϕ^T = 0.02, ϕ^S ≤ 0.0004). The results are discussed in relation to a diradical‐like mechanism. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:459–462, 2001     

Methyl 2‐O‐β‐d‐glucopyranosyl‐α‐l‐rhamnopyranoside

The overall conformation of the title compound, C₁₃H₂₄O₁₀, is described by the glycosidic torsion angles ?_H (H1_g—C1_g—O2_r—C2_r) and ψ_H (C1_g—O2_r—C2_r—H2_r), which have values of 13.6 and 16.1°, respectively. The former is significantly different from the value predicted by consideration of the exo‐anomeric effect (?_H～ 60°) and from that in solution (?_H～ 50°), as determined previously by NMR spectroscopy. An intramolecular O3_r—H?O2_g hydrogen bond may help to stabilize the conformation in the solid state. The orientation of the hydroxy­methyl group of the glucose residue is gauche–gauche, with a torsion angle ω (O5_g—C5_g—C6_g—O6_g) of ?70.4 (4)°. Both pyranose rings are in their expected chair conformations, i.e.⁴C₁ for d ‐glucose and ¹C₄ for l ‐rhamnose.     

Mechanistic study of ring‐opening copolymerization of ɛ‐caprolactam with epoxide: Development of novel thermosetting epoxy resin system

We investigated the mechanism of the ring‐opening copolymerization of ?‐caprolactam (?‐CL) with glycidyl phenyl ether (GPE) to afford poly(?‐CL‐co‐GPE) as a model reaction of the thermal curing of certain epoxy resins with ?‐CL. The reaction of ?‐CL and GPE proceeded efficiently in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) at 170^°C for 2 h. The monomer reactivities r₁ of ?‐CL and r₂ of GPE calculated according to the Fineman‐Ross method and the Kelen‐Tüdös method were 0.58 and 5.52, respectively. These values indicate that poly(?‐CL‐co‐GPE) has a pseudo‐block gradient copolymer. Based on these results, we examined the thermal curing reactions of certain epoxy resins with ?‐CL. The corresponding novel cured products were obtained quantitatively, and each of them showed a high glass transition temperature and high thermal stability, presumably due at least in part to a pseudo‐block gradient primary structure resembling that of poly(?‐CL‐co‐GPE). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2220–2228     

Synthesis of new amphiphilic diblock copolymers containing poly(ethylene oxide) and poly(α‐olefin)

This article discusses an effective route to prepare amphiphilic diblock copolymers containing a poly(ethylene oxide) block and a polyolefin block that includes semicrystalline thermoplastics, such as polyethylene and syndiotactic polystyrene (s‐PS), and elastomers, such as poly(ethylene‐co‐1‐octene) and poly(ethylene‐co‐styrene) random copolymers. The broad choice of polyolefin blocks provides the amphiphilic copolymers with a wide range of thermal properties from high melting temperature ～270 °C to low glass‐transition temperature ～?60 °C. The chemistry involves two reaction steps, including the preparation of a borane group‐terminated polyolefin by the combination of a metallocene catalyst and a borane chain‐transfer agent as well as the interconversion of a borane terminal group to an anionic (? O^?K⁺) terminal group for the subsequent ring‐opening polymerization of ethylene oxide. The overall reaction process resembles a transformation from the metallocene polymerization of α‐olefins to the ring‐opening polymerization of ethylene oxide. The well‐defined reaction mechanisms in both steps provide the diblock copolymer with controlled molecular structure in terms of composition, molecular weight, moderate molecular weight distribution (M_w/M_n < 2.5), and absence of homopolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3416–3425, 2002