Mössbauer Spectroscopic Investigation of FeII and FeIII 3,4,5‐Trihydroxybenzoates (Gallates) – Proposed Model Compounds for Iron‐Gall Inks

Iron gallates with iron in the oxidation states Fe²⁺ and Fe³⁺ were prepared and studied by Mössbauer spectroscopy, X‐ray diffraction, and IR spectroscopy. Fe^III 3,4,5‐trihydroxybenzoate (gallate) Fe(C₇O₅H₄) · 2H₂O, whose structure was first determined by Wunderlich, was obtained by the reaction of gallic acid and metallic iron or by oxidation of the Fe^II gallate, which was obtained by the reaction of ferrous sulfate with 3,4,5‐trihydroxybezoic acid (gallic acid) under anoxic conditions. Trials to reproduce the hydrothermal preparation method of Feller and Cheetham show that the result depends crucially on the free gas volume in the reaction vessel. If there is no free volume one obtains the same Fe^III gallate as in the other preparation methods. With a large free volume another compound was found to form whose composition and structure could not be determined. It could be specified only by Mössbauer spectroscopy. Fe^III gallate, the Fe^II gallate, and the new phase show magnetic ordering at liquid helium temperature.     

Octacyanidorhenate(V) Ion as an Efficient Linker for Hysteretic Two‐Step Iron(II) Spin Crossover Switchable by Temperature,Light, and Pressure

A two‐step hysteretic Fe^II spin crossover (SCO) effect was achieved in programmed layered Cs{[Fe(3‐CNpy)₂][Re(CN)₈]}?H₂O ( 1 ) (3‐CNpy=3‐cyanopyridine) assembly consisting of cyanido‐bridged Fe^II‐Re^V square grid sheets bonded by Cs⁺ ions. The presence of two non‐equivalent Fe^II sites and the conjunction of 2D bimetallic coordination network with non‐covalent interlayer interactions involving Cs⁺, [Re^V(CN)₈]^3? ions, and 3‐CNpy ligands, leads to the occurrence of two steps of thermal SCO with strong cooperativity giving a double thermal hysteresis loop. The resulting spin‐transition phenomenon could be tuned by an external pressure giving the room‐temperature range of SCO, as well as by visible‐light irradiation, inducing an efficient recovery of the high‐spin Fe^II state at low temperatures. We prove that octacyanidorhenate(V) ion is an outstanding metalloligand for induction of a cooperative multistep, multiswitchable Fe^II SCO effect.     

Controlled Incorporation of Nitrides into W‐Fe‐S Clusters

Incorporation of monatomic 2p ligands into the core of iron–sulfur clusters has been researched since the discovery of interstitial carbide in the FeMo cofactor of Mo‐dependent nitrogenase, but has proven to be a synthetic challenge. Herein, two distinct synthetic pathways are rationalized to install nitride ligands into targeted positions of W‐Fe‐S clusters, generating unprecedented nitride‐ligated iron–sulfur clusters, namely [(Tp*)₂W₂Fe₆(μ₄‐N)₂S₆L₄]^2? (Tp*=tris(3,5‐dimethyl‐1‐pyrazolyl)hydroborate(1?), L=Cl^? or Br^?). ⁵⁷Fe Mössbauer study discloses metal oxidation states of W^IV₂Fe^II₄Fe^III₂ with localized electron distribution, which is analogous to the mid‐valent iron centres of FeMo cofactor at resting state. Good agreement of Mössbauer data with the empirical linear relationship for Fe–S clusters indicates similar ligand behaviour of nitride and sulfide in such clusters, providing useful reference for reduced nitrogen in a nitrogenase‐like environment.     

Iron‐Catalyzed Highly Enantioselective cis‐Dihydroxylation of Trisubstituted Alkenes with Aqueous H2O2

Reliable methods for enantioselective cis‐dihydroxylation of trisubstituted alkenes are scarce. The iron(II) complex cis‐α‐[Fe^II(2‐Me₂‐BQPN)(OTf)₂], which bears a tetradentate N₄ ligand (Me₂‐BQPN=(R,R)‐N,N′‐dimethyl‐N,N′‐bis(2‐methylquinolin‐8‐yl)‐1,2‐diphenylethane‐1,2‐diamine), was prepared and characterized. With this complex as the catalyst, a broad range of trisubstituted electron‐deficient alkenes were efficiently oxidized to chiral cis‐diols in yields of up to 98 % and up to 99.9 % ee when using hydrogen peroxide (H₂O₂) as oxidant under mild conditions. Experimental studies (including ¹⁸O‐labeling, ESI‐MS, NMR, EPR, and UV/Vis analyses) and DFT calculations were performed to gain mechanistic insight, which suggested possible involvement of a chiral cis‐Fe^V(O)₂ reaction intermediate as an active oxidant. This cis‐[Fe^II(chiral N₄ ligand)]²⁺/H₂O₂ method could be a viable green alternative/complement to the existing OsO₄‐based methods for asymmetric alkene dihydroxylation reactions.     

catena‐Poly[[diaquadiisothiocyanatoiron(II)]‐μ‐4,4′‐bi‐1,2,4‐triazole]: a one‐dimensional coordination polymer

In the title complex, [Fe(NCS)₂(C₄H₂N₆)₂(H₂O)₂]_n, the Fe^II atom is on an inversion centre and the 4,4′‐bi‐1,2,4‐triazole (btr) group is bisected by a twofold axis through the central N—N bond. The coordination geometry of the Fe^II atom is elongated distorted FeN₄O₂ octahedral, where the cation is coordinated by two N atoms from the triazole rings of two btr groups, two N atoms from NCS⁻ ligands and two water molecules. Btr is a bidentate ligand, coordinating one Fe^II atom through a peripheral N atom of each triazole ring, leading to a one‐dimensional polymeric (chain) structure extending along [101]. The chains are further connected through a network of O—H...N and C—H...S hydrogen bonds.     

Lability‐Controlled Syntheses of Heterometallic Clusters

A bulky bidentate ligand was used to stabilize a macrocyclic [Fe^III₈Co^II₆] cluster. Tuning the basicity of the ligand by derivatization with one or two methoxy groups led to the isolation of a homologous [Fe^III₈Co^II₆] species and a [Fe^III₆Fe^II₂Co^III₂Co^II₂] complex, respectively. Lowering the reaction temperatures allowed isolation of [Fe^III₆Fe^II₂Co^III₂Co^II₂] clusters with all three ligands. Temperature‐dependent absorption data and corresponding experiments with iron/nickel systems indicated that the iron/cobalt self‐assembly process was directed by the occurrence of solution‐state electron‐transfer‐coupled spin transition (ETCST) and its influence on reaction intermediate lability.     

A Heteroleptic Ferrous Complex with Mesoionic Bis(1,2,3‐triazol‐5‐ylidene) Ligands: Taming the MLCT Excited State of Iron(II)

Strongly σ‐donating N‐heterocyclic carbenes (NHCs) have revived research interest in the catalytic chemistry of iron, and are now also starting to bring the photochemistry and photophysics of this abundant element into a new era. In this work, a heteroleptic Fe^II complex ( 1 ) was synthesized based on sequentially furnishing the Fe^II center with the benchmark 2,2′‐bipyridine (bpy) ligand and the more strongly σ‐donating mesoionic ligand, 4,4′‐bis(1,2,3‐triazol‐5‐ylidene) (btz). Complex 1 was comprehensively characterized by electrochemistry, static and ultrafast spectroscopy, and quantum chemical calculations and compared to [Fe(bpy)₃](PF₆)₂ and (TBA)₂[Fe(bpy)(CN)₄]. Heteroleptic complex 1 extends the absorption spectrum towards longer wavelengths compared to a previously synthesized homoleptic Fe^II NHC complex. The combination of the mesoionic nature of btz and the heteroleptic structure effectively destabilizes the metal‐centered (MC) states relative to the triplet metal‐to‐ligand charge transfer (³MLCT) state in 1 , rendering it a lifetime of 13 ps, the longest to date of a photochemically stable Fe^II complex. Deactivation of the ³MLCT state is proposed to proceed via the ³MC state that strongly couples with the singlet ground state.     

Bis(thio­carbohydrazide)dithio­cyanato­iron(II)

In the title compound, [Fe^II(NCS)₂(CH₆N₄S)₂], the Fe^II cation is surrounded by two S atoms and two N atoms from thio­carbohydrazide groups and by two N atoms from thio­cyanate groups. The geometry around the Fe^II cation, which is located on a center of inversion, is distorted octa­hedral. The thio­carbohydrazide mol­ecule assumes a cis–trans conformation, which is reinforced by an N—H⋯N hydrogen bond. Mol­ecules of the title compound are connected via inter­molecular N—H⋯S and N—H⋯N hydrogen bonds to form a three‐dimensional network structure.     

The Photochemistry of [FeIIIN3(cyclam‐ac)]PF6 at 266 nm

The photochemistry of iron azido complexes is quite challenging and poorly understood. For example, the photochemical decomposition of [Fe^IIIN₃(cyclam‐ac)]PF₆ ([ 1 ]PF₆), where cyclam‐ac represents the 1,4,8,11‐tetraazacyclotetradecane‐1‐acetate ligand, has been shown to be wavelength‐dependent, leading either to the rare high‐valent iron(V) nitrido complex [Fe^VN(cyclam‐ac)]PF₆ ([ 3 ]PF₆) after cleavage of the azide N_α? N_β bond, or to a photoreduced Fe^II species after Fe? N_azide bond homolysis. The mechanistic details of this intriguing reactivity have never been studied in detail. Here, the photochemistry of 1 in acetonitrile solution at room temperature has been investigated using step‐scan and rapid‐scan time‐resolved Fourier transform infrared (FTIR) spectroscopy following a 266 nm, 10 ns pulsed laser excitation. Using carbon monoxide as a quencher for the primary iron‐containing photochemical product, it is shown that 266 nm excitation of 1 results exclusively in the cleavage of the Fe? N_azide bond, as was suspected from earlier steady‐state irradiation studies. In argon‐purged solutions of [ 1 ]PF₆, the solvent‐stabilized complex cation [Fe^II(CH₃CN)(cyclam‐ac)]⁺ ( 2 red ) together with the azide radical (N₃^.) is formed with a relative yield of 80 %, as evidenced by the appearance of their characteristic vibrational resonances. Strikingly, step‐scan experiments with a higher time resolution reveal the formation of azide anions (N₃^?) during the first 500 ns after photolysis, with a yield of 20 %. These azide ions can subsequently react thermally with 2 red to form [Fe^IIN₃(cyclam‐ac)] ( 1 red ) as a secondary product of the photochemical decomposition of 1 . Molecular oxygen was further used to quench 1 red and 2 red to form what seems to be the elusive complex [Fe(O₂)(cyclam‐ac)]⁺ ( 6 ).     

Characterization of the FeV=O Complex in the Pathway of Water Oxidation

Hypervalent Fe^V=O species are implicated in a multitude of oxidative reactions of organic substrates, as well as in catalytic water oxidation, a reaction crucial for artificial photosynthesis. Spectroscopically characterized Fe^V species are exceedingly rare and, so far, were produced by the oxidation of Fe complexes with peroxy acids or H₂O₂: reactions that entail breaking of the O?O bond to form a Fe^V=O fragment. The key Fe^V=O species proposed to initiate the O?O bond formation in water oxidation reactions remained undetected, presumably due to their high reactivity. Here, we achieved freeze quench trapping of six coordinated [Fe^V=O,(OH)(Pytacn)]²⁺ (Pytacn=1‐(2′‐pyridylmethyl)‐4,7‐dimethyl‐1,4,7‐triazacyclononane) ( 2 ) generated during catalytic water oxidation. X‐ray absorption spectroscopy (XAS) confirmed the Fe^V oxidation state and the presence of a Fe^V=O bond at ≈1.60 Å. Combined EPR and DFT methods indicate that 2 contains a S=3/2 Fe^V center. 2 is the first spectroscopically characterized high spin oxo‐Fe^V complex and constitutes a paradigmatic example of the Fe^V=O(OH) species proposed to be responsible for catalytic water oxidation reactions.     

Nitrieren von Eisen mit Ammoniak: Wachstum und Mikrostruktur der Nitride und Porenbildung in ζ‐Fe2N

Nitridation of Iron with Ammonia: Growth and Microstructure of Nitrides and Pore Formation in ζ‐Fe₂N Layers of γ′‐Fe₄N, ϵ‐Fe₃N, and ζ‐Fe₂N on ferrite were produced by nitridation of single crystals and rolled sheet of iron in flowing ammonia at 430 and 475 °C. The nitride layers on ferrite were prepared in cross section and were characterised using X‐ray diffraction, light microscopy as well as scanning and transmission electron microscopy. The growth rate of the nitride layers on the single crystals were found to be similar as that on the rolled sheet. The size of the nitride grains on the single crystal are significantly larger, which is identified as the reason for the different pore structure in the two materials. Pores only occur in the outer ζ‐Fe₂N layer. The formation of pores at the interface ϵ‐Fe₃N/ζ‐Fe₂N and the crystallographic orientation relationship between ϵ‐Fe₃N and ζ‐Fe₂N were studied and determined using electron microscopy and electron diffraction. The pore formation is explained by the existence of a two‐phase region at the phase boundary ϵ‐Fe₃N/ζ‐Fe₂N and by an indifferent equilibrium which is caused by local instabilities in the nitrogen flux.     

catena‐Poly­[[[1,8‐bis(2‐hydroxy­ethyl)‐1,3,6,8,10,13‐hexa­aza­cyclo­tetra­decane]copper(II)]‐μ‐cyano‐[tri­cyano­nitro­soiron(III)]‐μ‐cyano]

The bimetallic title complex, [CuFe(CN)₅(C₁₂H₃₀N₆O₂)(NO)] or [Cu(L)Fe(CN)₅(NO)] [where L is 1,8‐bis(2‐hydroxy­ethyl)‐1,3,6,8,10,13‐hexa­aza­cyclo­tetra­decane], has a one‐dimensional zigzag polymeric –Cu(L)–NC–Fe(NO)(CN)₃–CN–Cu(L)– chain, in which the Cu^II and Fe^II centres are linked by two CN groups. In the complex, the Cu^II ion is coordinated by four N atoms from the L ligand [Cu—N(L) = 1.999 (2)–2.016 (2) Å] and two cyanide N atoms [Cu—N = 2.383 (2) and 2.902 (3) Å], and has an elongated octahedral geometry. The Fe^II centre is in a distorted octahedral environment, with Fe—N(nitroso) = 1.656 (2) Å and Fe—C(CN) = 1.938 (3)–1.948 (3) Å. The one‐dimensional zigzag chains are linked to form a three‐dimensional network via N—H⋯N and O—H⋯N hydrogen bonds.     

Metal(II) Ion Complexes with 5‐(Pyrazin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione; Synthesis,Structural Characterization,Acid‐base,and Complexing Properties in Solution

The study reports the synthesis of complexes Co(HL)Cl₂ ( 1 ), Ni(HL)Cl₂ ( 2 ), Cu(HL)Cl₂ ( 3 ), and Zn(HL)₃Cl₂ ( 4 ) with the title ligand, 5‐(pyrazin‐2‐yl)‐1,2,4‐triazole‐5‐thione (HL), and their characterization by elemental analyses, ESI‐MS (m/z), FT‐IR and UV/Vis spectroscopy, as well as EPR in the case of the Cu^II complex. The comparative analysis of IR spectra of the metal ion complexes with HL and HL alone indicated that the metal ions in 1 , 2 , and 3 are chelated by two nitrogen atoms, N(4) of pyrazine and N(5) of triazole in the thiol tautomeric form, whereas the Zn^II ion in 4 is coordinated by the non‐protonated N(2) nitrogen atom of triazole in the thione form. pH potentiometry and UV/Vis spectroscopy were used to examine Co^II, Ni^II, and Zn^II complexes in 10/90 (v/v) DMSO/water solution, whereas the Cu^II complex was examined in 40/60 (v/v) DMSO/water solution. Monodeprotonation of the thione triazole in solution enables the formation of the L:M = 1:1 species with Co^II, Ni^II and Zn^II, the 2:1 species with Co^II and Zn^II, and the 3:1 species with Zn^II. A distorted tetrahedral arrangement of the Cu^II complex was suggested on the basis of EPR and Vis/NIR spectra.     

Linear End‐On Coordination Modes of CO2

The second case of linear end‐on and evidence for an unprecedented bridging end‐on coordination mode of CO₂ have been discovered for vanadium aryloxide complexes of the tetradentate ligand system (ONNO)^2? (ONNO=2,4‐Me₂‐2‐(OH) C₆H₂CH₂]₂N(CH₂)₂NMe₂). The reaction of divalent (ONNO)V^II (TMEDA) with CO₂ and under the appropriate reaction conditions affords the trivalent (ONNO)V^III(OH)(η¹‐CO₂) resulting from an intermediate CO₂ deoxygenation pathway followed by H‐atom abstraction from the aromatic solvent, and CO₂ fixation. In contrast, the reduction of trivalent (ONNO)V^IIICl(THF) with K, followed by exposure to CO₂ in ethereal solvent, afforded the dinuclear [(ONNO)V^II]₂ (μ_,η¹‐CO₂).     

Intramolecular Oxidative O‐Demethylation of an Oxoferryl Porphyrin Complexed with a Per‐O‐methylated β‐Cyclodextrin Dimer

The intramolecular oxidation of ROCH₃ to ROCH₂OH, where the latter compound spontaneously decomposed to ROH and HCHO, was observed during the reaction of the supramolecular complex (met‐hemoCD3) with cumene hydroperoxide in aqueous solution. Met‐hemoCD3 is composed of meso‐tetrakis(4‐sulfonatophenyl)porphinatoiron(III) (Fe^IIITPPS) and a per‐O‐methylated β‐cyclodextrin dimer having an ‐OCH₂PyCH₂O‐ linker (Py=pyridine‐3,5‐diyl). The O=Fe^IVTPPS complex was formed by the reaction of met‐hemoCD3 with cumene hydroperoxide, and isolated by gel‐filtration chromatography. Although the isolated O=Fe^IVTPPS complex in the cyclodextrin cage was stable in aqueous solution at 25 °C, it was gradually converted to Fe^IITPPS (t_1/2=7.6 h). This conversion was accompanied by oxidative O‐demethylation of an OCH₃ group in the cyclodextrin dimer. The results indicated that hydrogen abstraction by O=Fe^IVTPPS from ROCH₃ yields HO‐Fe^IIITPPS and ROCH₂^.. This was followed by radical coupling to afford Fe^IITPPS and ROCH₂OH. The hemiacetal (ROCH₂OH) immediately decomposed to ROH and HCHO. This study revealed the ability of oxoferryl porphyrin to induce two‐electron oxidation.     

Heterogeneous CuII‐Catalysed Solvent‐Controlled Selective N‐Arylation of Cyclic Amides and Amines with Bromo‐iodoarenes

A selective N‐arylation of cyclic amides and amines in DMF and water, respectively, catalysed by Cu^II/Al₂O₃ has been achieved. This protocol has been employed for the synthesis of a library of arenes bearing a cyclic amide and an amine moiety at two ends, including a few scaffolds of therapeutic importance. The mechanism has been established based on detailed electron paramagnetic resonance (EPR) spectroscopy, X‐ray photoelectron spectroscopy (XPS), UV diffuse reflectance spectroscopy (DRS) and inductively coupled plasma‐mass spectrometry (ICP‐MS) studies of the catalyst at different stages of the reaction. The Cu^II/Al₂O₃ catalyst was recovered and recycled for subsequent reactions.     

Kinetic studies on the periodate oxidation of an iron(II) oxime‐imine complex

The iron(II) complex of H₂L (H₂L=3, 14‐dimethyl‐4, 7, 10, 13‐tetraazahexadeca‐3,13‐diene‐2,15‐dione dioxime, Coord. Chem. Rev., 33, 87 (1980)) is oxidized by periodate very rapidly in the range pH 2.0–7.0, and the kinetics of the reaction has been followed by stopped‐flow spectrophotometry at 30°C and ionic strength I=0.20 mol L⁻¹ (NaClO₄). The reaction is found to follow a simple second‐order kinetics as −d/dt [Fe^II(H₂L)²⁺]=k [Fe^II(H₂L)²⁺] [I(VII)], giving [Fe^III(L)]⁺ and IO₃⁻ as the final products. The reaction has been proposed to occur through a H‐bonded transition state formed probably between the protonated oxime group of the ligand and the oxygen atom on the periodate species, followed by an electron transfer from Fe^II centre to I^VII in a rate‐determining step. The I^VI species thus generated reacts in a fast step with another Fe^II complex. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 23–28, 1999     

Air‐Free Synthesis of a Ferrous Metal‐Organic Framework Featuring HKUST‐1 Structure and its Mössbauer Spectrum

Single crystals of the Fe^II metal‐organic framework (MOF) with 1,3,5‐benzenetricarboxylate (BTC) as a linker were solvothermally obtained under air‐free conditions. X‐ray diffraction analysis of the crystals demonstrated a structure for Fe^II‐MOF analogous to that of [Cu₃(BTC)₂] (HKUST‐1). Unlike HKUST‐1, however, the Fe^II‐MOF did not retain permanent porosity after exchange of guest molecules. The Mössbauer spectrum of the Fe^II‐MOF was recorded at 80 K in zero field yielding an apparent quadrupole splitting of ΔE_Q = 2.43 mm · s^–1, and an isomer shift of δ = 1.20 mm · s^–1, consistent with high‐spin central iron(II) atoms. Air exposure of the Fe^II‐MOF was found to result in oxidation of the metal atoms to afford Fe^III. These results demonstrate that Fe^II‐based MOFs can be prepared in similar fashion to the [Cu₃(BTC)₂], but that they lack permanent porosity when degassed.     

A diketiminate‐bound diiron complex with a bridging carbonate ligand

Reduction of carbon dioxide by a diiron(I) complex gives μ‐carbonato‐κ³O:O′,O′′‐bis{[2,2,6,6‐tetramethyl‐3,5‐bis(2,4,6‐triisopropylphenyl)heptane‐2,5‐diiminate(1−)‐κ²N,N′]iron(II)} toluene disolvate, [Fe₂(C₄₁H₆₅N)₂(CO₃)]·2C₇H₈, a diiron(II) species with a bridging carbonate ligand. The asymmetric unit contains one diiron complex and two cocrystallized toluene solvent molecules that are distributed over three sites, one with atoms in general positions and two in crystallographic sites. Both Fe^II atoms are η²‐coordinated to diketiminate ligands, but η¹‐ and η²‐coordinated to the bridging carbonate ligand. Thus, one Fe^II center is three‐coordinate and the other is four‐coordinate. The bridging carbonate ligand is nearly perpendicular to the iron–diketiminate plane of the four‐coordinate Fe^II center and parallel to the plane of the three‐coordinate Fe^II center.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.