Carcinogenic Organic Residual Compounds Readsorbed on Thermally Reduced Graphene Materials are Released at Low Temperature

The preliminary oxidation of graphite to graphite oxide followed by a thermal exfoliation is one of the methods most frequently employed in the preparation of graphene. Such thermally reduced graphene can be widely used for several applications that range from coatings to sensing device fabrication. It is therefore important to investigate in detail the fabrication procedure, the structural features of the resulting graphene, and its potential toxicological effects. Low‐molecular‐weight and carcinogenic compounds are known to be generated during the thermal reduction/exfoliation of graphite oxide. Such compounds are readsorbed onto the reduced material during the cooling process. We investigate here the composition of the organic compounds that are adsorbed onto the graphene material and show that they can be easily released during the following processing steps even at temperatures as low as 50 °C. Some of the released organic compounds are classified as highly carcinogenic. The results shown here are important not only from a chemical point of view to better understand the composition and properties of the graphene material produced, but also to bring attention to the potential toxicological effects that the synthesis itself or the post‐production processes can cause.     

Controlled Chemistry Approach to the Oxo‐Functionalization of Graphene

Graphene is the best‐studied 2D material available. However, its production is still challenging and the quality depends on the preparation procedure. Now, more than a decade after the outstanding experiments conducted on graphene, the most successful wet‐chemical approach to graphene and functionalized graphene is based on the oxidation of graphite. Graphene oxide has been known for more than a century; however, the structure bears variable large amounts of lattice defects that render the development of a controlled chemistry impossible. The controlled oxo‐functionalization of graphene avoids the formation of defects within the σ‐framework of carbon atoms, making the synthesis of specific molecular architectures possible. The scope of this review is to introduce the field of oxo‐functionalizing graphene. In particular, the differences between GO and oxo‐functionalized graphene are described in detail. Moreover analytical methods that allow determining lattice defects and functional groups are introduced followed by summarizing the current state of controlled oxo‐functionalization of graphene.     

Electrochemically Exfoliated Graphene and Graphene Oxide for Energy Storage and Electrochemistry Applications

Top‐down methods are of key importance for large‐scale graphene and graphene oxide preparation. Electrochemical exfoliation of graphite has lately gained much interest because of the simplicity of execution, the short process time, and the good quality of graphene that can be obtained. Here, we test three different electrolytes, that is, H₂SO₄, Na₂SO₄, and LiClO₄, with a common exfoliation procedure to evaluate the difference in structural and chemical properties that result for the graphene. The properties are analyzed by means of scanning transmission electron microscopy (STEM), Raman spectroscopy, and X‐ray photoelectron spectroscopy. We then tested the graphene materials for electrochemical applications, measuring the heterogeneous electron transfer (HET) rates with a Fe(CN)₆^3?/4? redox probe, and their capacitive behavior in alkaline solutions. We correlate the electrochemical features with the presence of structural defects and oxygen functionalities on the graphene materials. In particular, the use of LiClO₄ during the electrochemical exfoliation of graphite allowed the formation of highly oxidized graphene with a C/O ratio close to 4.0 and represents a possible avenue for the mass production of graphene oxide as valid alternative to the current laborious and dangerous chemical procedures, which also have limited scalability.     

Concurrent Phosphorus Doping and Reduction of Graphene Oxide

Doped graphene materials are of huge importance because doping with electron‐donating or electron‐withdrawing groups can significantly change the electronic structure and impact the electronic and electrochemical properties of these materials. It is highly important to be able to produce these materials in large quantities for practical applications. The only method capable of large‐scale production is the oxidative treatment of graphite to graphene oxide, followed by its consequent reduction. We describe a scalable method for a one‐step doping of graphene with phosphorus, with a simultaneous reduction of graphene oxide. Such a method is able to introduce significant amount of dopant (3.65 at. %). Phosphorus‐doped graphene is characterized in detail and shows important electronic and electrochemical properties. The electrical conductivity of phosphorus‐doped graphene is much higher than that of undoped graphene, owing to a large concentration of free carriers. Such a graphene material is expected to find useful applications in electronic, energy storage, and sensing devices.     

A New Member of the Graphene Family: Graphene Acid

A new member of the family of graphene derivatives, namely, graphene acid with a composition close to C₁(COOH)₁, was prepared by oxidation of graphene oxide. The synthetic procedure is based on repeated oxidation of graphite with potassium permanganate in an acidic environment. The oxidation process was studied in detail after each step. The multiple oxidations led to oxidative removal of other oxygen functional groups formed in the first oxidation step. Detailed chemical analysis showed only a minor amount of other oxygen‐containing functional groups such as hydroxyl and the dominant presence of carboxyl groups in a concentration of about 30 wt %. Further oxidation led to complete decomposition of graphene acid. The obtained material exhibits unique sorption capacity towards metal ions and carbon dioxide. The highly hydrophilic nature of graphene acid allowed the assembly of ultrathin free‐standing membranes with high transparency.     

Selective Nitrogen Functionalization of Graphene by Bucherer‐Type Reaction

Nitrogen functionalization of graphene offers new hybrid materials with improved performance for important technological applications. Despite studies highlighting the dependence of the performance of nitrogen‐functionalized graphene on the types of nitrogen functional groups that are present, precise synthetic control over their ratio is challenging. Herein, the synthesis of nitrogen‐functionalized graphene rich in amino groups by a Bucherer‐type reaction under hydrothermal conditions is reported. The efficiency of the synthetic method under two hydrothermal conditions was examined for graphite oxide produced by Hummers and Hofmann oxidation routes. The morphological and structural properties of the amino‐functionalized graphene were fully characterized. The use of a synthetic method with a well‐known mechanism for derivatization of graphene will open new avenues for highly reproducible functionalization of graphene materials.     

Precise Tuning of Surface Composition and Electron‐Transfer Properties of Graphene Oxide Films through Electroreduction

Graphene materials are generally prepared from the exfoliation of graphite oxide (GO) to graphene oxide, followed by subsequent chemical or thermal reduction. These methods, although efficient in removing most of the oxygen functionalities from the GO material, lack control over the extent of the reduction process. We demonstrate here an electrochemical reduction procedure that not only allows for precise control of the reduction process to obtain a graphene material with a well‐defined C/O ratio in the range of 3 to 10, but also one that is able to tune the electrocatalytic properties of the reduced material. A method that is able to precisely control the amount and density of the oxygen functionalities on the graphene material as well as its electrochemical behaviour is very important for several applications such as electronics, bio‐composites and electrochemical devices.     

New Insights into the Diels–Alder Reaction of Graphene Oxide

Graphene oxide is regarded as a major precursor for graphene‐based materials. The development of graphene oxide based derivatives with new functionalities requires a thorough understanding of its chemical reactivity, especially for canonical synthetic methods such as the Diels–Alder cycloaddition. The Diels–Alder reaction has been successfully extended with graphene oxide as a source of diene by using maleic anhydride as a dienophile, thereby outlining the presence of the cis diene present in the graphene oxide framework. This reaction provides fundamental information for understanding the exact structure and chemical nature of graphene oxide. On the basis of high‐resolution ¹³C‐SS NMR spectra, we show evidence for the formation of new sp³ carbon centers covalently bonded to graphene oxide following hydrolysis of the reaction product. DFT calculations are also used to show that the presence of a cis dihydroxyl and C vacancy on the surface of graphene oxide are promoting the reaction with significant negative reaction enthalpies.     

Chemical Preparation of Graphene Materials Results in Extensive Unintentional Doping with Heteroatoms and Metals

Chemical synthesis of graphene relies on the usage of various chemical reagents. The initial synthesis step, in which graphite is oxidized to graphite oxide, is achieved by a combination of chemical oxidants and acids. A subsequent chemical reduction step eliminates/reduces most oxygen functionalities to yield graphene. We demonstrate here that these chemical treatments significantly contaminate graphene with heteroatoms/metals, depending on the procedures followed. Contaminations with heteroatoms (N, B, Cl, S) or metals (Mn, Al) were present at relatively high concentrations (up to 3 at %), with their chemical states dependent on the procedures. Such unintentional contaminations (unwanted doping) during chemical synthesis are rarely anticipated and reported, although the heteroatoms/metals may alter the electronic and catalytic properties of graphene. In fact, the levels of unintentionally introduced contaminants on graphene are often higher than typical levels found on intentionally doped graphene. Our findings are important for scientists applying chemical methods to prepare graphene.     

Brodie's or Hummers’ Method: Oxidation Conditions Determine the Structure of Graphene Oxide

Synthesis and studies of graphite oxide started more than 150 years ago and turned into a boom by the measurements of the outstanding physical properties of graphene. A series of preparation protocols emanated trying to optimize the synthesis of graphene oxide in order to obtain a less defective material, as source for graphene. However, over-oxidation of the carbon framework hampered establishing structure-property relationships. Here, the fact that two different synthetic methods for graphene oxide preparation lead to very similar types of graphene oxide with a preserved graphene lattice is demonstrated. Either sodium chlorate in nitric acid (similar to Brodie's method) or potassium permanganate in sulfuric acid (similar to Hummers’ method) treatment are possible; however, reaction conditions must be controlled. With a preserved carbon lattice analytical differences between the samples relate to the altered on-plane functionality. Consequently, terming preparation protocols “according to Brodie's/Hummers’ method” is not sufficient.     

The Route to Functional Graphene Oxide

We report on an easy‐to‐use, successful, and reproducible route to synthesize functionalized graphite oxide (GO) and its conversion to graphene‐like materials through chemical or thermal reduction of GO. Graphite oxide containing hydroxyl, epoxy, carbonyl, and carboxyl groups loses mainly hydroxyl and epoxy groups during reduction, whereas carboxyl species remain untouched. The interaction of functionalized graphene with fluorescent methylene blue (MB) is investigated and compared to graphite, fully oxidized GO, as well as thermally and chemically reduced GO. Optical absorption and emission spectra of the composites indicate a clear preference for MB interaction with the GO derivatives containing a large number of functional groups (GO and chemically reduced GO), whereas graphite and thermally reduced GO only incorporate a few MB molecules. These findings are consistent with thermogravimetric, X‐ray photoelectron spectroscopic, and Raman data recorded at every stage of preparation. The optical data also indicate concentration‐dependent aggregation of MB on the GO surface leading to stable MB dimers and trimers. The MB dimers are responsible for fluorescence quenching, which can be controlled by varying the pH value.     

Selective Removal of Hydroxyl Groups from Graphene Oxide

Graphene has a wide range of potential applications, thus tremendous efforts have been put into ensuring that the most direct and effective methods for its large‐scale production are developed. The formation of graphene materials from graphene oxide through a chemical reduction method is still one of the most preferred routes. Numerous methods starting from various reducing agents have been developed to obtain near‐pristine graphene sheets. However, most of the reducing agents are not mechanistically supported by classical organic chemistry knowledge and of those that are supported, they are only theoretically capable of, at most, reducing oxygen‐containing groups on graphene oxide to hydroxyl groups. Herein, we present a mechanistically proven method for the selective defunctionalisation of hydroxyl groups from graphene oxide that is based on ethanethiol–aluminium chloride complexes and provides a graphene material with improved properties. The structural, morphological and electrochemical properties of the graphene materials have been fully characterised based on high‐resolution X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, electrochemical impedance spectroscopy and cyclic voltammetry techniques. Our analyses showed that the obtained graphene materials exhibited high heterogeneous electron‐transfer rates, low charge‐transfer resistance and high conductivity as compared to the parent graphene oxide. Moreover, the selective defunctionalisation of hydroxyl groups could potentially allow for the tailoring of graphene properties for various applications.     

Regeneration of a Conjugated sp2 Graphene System through Selective Defunctionalization of Epoxides by Using a Proven Synthetic Chemistry Mechanism

Graphene is a promising material capable of driving technological advancement. It is, however, a challenge to obtain pristine graphene in large quantities given the limitation of current synthetic methods. Among the numerous methods available, the chemical approach provides an optimistic outlook and has garnered much interest within the graphene community as a potential alternative. One of the most crucial steps of the chemical approach is the chemical reduction of graphene oxide as this dictates the final quality of the graphene sheets. In recent years, much of the focus has shifted to the usage of established reducing agents or oxygen removal reagents, frequently applied in organic chemistry, onto a graphene oxide platform. Herein, the selective removal of epoxide groups and subsequent regeneration of disrupted conjugated sp² system is highlighted, based on the synergistic effect of indium and indium(I) chloride. The morphological, structural, and electrical properties of the resulting graphene were fully characterized with X‐ray photoelectron, Fourier transform IR, solid‐state ¹³C NMR, and Raman spectroscopy; thermogravimetric analysis; scanning electron microscopy; and conductivity measurements. The as‐prepared graphene showed a tenfold increase in conductivity against conventional graphene treated with hydrazine reducing agent and demonstrated a high dispersion stability in ethanol. Moreover, the selective defunctionalization of the epoxide groups provides opportunities for potential tailoring of graphene properties for prospective applications.     

Aqueous Dispersions of Graphene from Electrochemically Exfoliated Graphite

A facile and environmentally friendly synthetic strategy for the production of stable and easily processable dispersions of graphene in water is presented. This strategy represents an alternative to classical chemical exfoliation methods (for example the Hummers method) that are more complex, harmful, and dangerous. The process is based on the electrochemical exfoliation of graphite and includes three simple steps: 1) the anodic exfoliation of graphite in (NH₄)₂SO₄, 2) sonication to separate the oxidized graphene sheets, and 3) reduction of oxidized graphene to graphene. The procedure makes it possible to convert around 30 wt % of the initial graphite into graphene with short processing times and high yields. The graphene sheets are well dispersed in water, have a carbon/oxygen atomic ratio of 11.7, a lateral size of about 0.5–1 μm, and contain only a few graphene layers, most of which are bilayer sheets. The processability of this type of aqueous dispersion has been demonstrated in the fabrication of macroscopic graphene structures, such as graphene aerogels and graphene films, which have been successfully employed as absorbents or as electrodes in supercapacitors, respectively.     

Labeling Graphene Oxygen Groups with Europium

Graphene‐related materials contain chemically bonded oxygen atoms in the form of epoxy, hydroxy, carboxy, and carbonyl groups. It is important to determine the quantity of oxygen atoms and to understand their position on the graphene sheet. However, visualization of these groups by standard methods is a challenge. Here, we utilize europium(III) as a selective label for oxygen‐containing groups. We studied three different graphene‐related materials: 1) graphene oxide, 2) chemically reduced graphene oxide, and 3) thermally reduced graphene oxide (the number of oxygen containing groups decreases from material 1 to 3). We show that it is possible to efficiently use Eu as a label of oxygen‐containing groups. This Eu label could be applied to determine the precise location of oxygen‐containing groups on graphene sheets and also induce novel optical, electrochemical, and catalytic properties.     

Electrocatalytic Activities of Chemically Reduced Graphene Are Essentially Dominated by the Adhered Carbonaceous Debris

Due to its simple, scalable, and facile qualities, the chemical reduction of graphene oxide seems to be the most popular approach to prepare graphene. We show that such prepared graphene is strongly adhered with carbonaceous debris that has been produced during the synthesis of graphene oxide by the chemical exfoliation of graphite and still remain on graphene sheets through the chemical reduction steps. Interestingly, the presence of the carbonaceous debris causes a significant impact on the electrochemical behavior of the chemical reduced graphene. Herein, we demonstrate that the electrocatalytical activities of the graphene are greatly boosted by the adhered carbonaceous debris. After the removal of the carbonaceous debris, the electrocatalysis of graphene is not superior to conventional graphite.     

石墨烯和铂/石墨烯的合成及其表征

以天然鳞状石墨为原料,采用化学氧化法合成氧化石墨,在此基础上采用低温热解膨胀结合微波加热乙二醇还原法合成石墨烯(Gr)以及铂/石墨烯(Pt/Gr)复合材料。SEM和TEM显示所制备的石墨烯为层状结构的半透明薄膜。采用X射线光电子能谱(XPS)和傅立叶转换红外光谱(FTIR)分别确定氧化石墨、膨胀石墨及石墨烯表面含氧官能团的数量和性质。以所制备的碳氧原子比5.94的石墨烯作为载体制备出可用于质子交换膜燃料电池的高负载量的Pt/Gr催化剂,在铂载量高达60%时,表面铂粒子依然具有高分散性,平均粒径为3.8 nm。     

The Role of Oxidative Debris on Graphene Oxide Films

We study the effect of oxidative impurities on the properties of graphene oxide and on the graphene oxide Langmuir–Blodgett films (LB). The starting material was grupo Antolín nanofibers (GANF) and the oxidation process was a modified Hummers method to obtain highly oxidized graphene oxide. The purification procedure reported in this work eliminated oxidative impurities decreasing the thickness of the nanoplatelets. The purified material thus obtained presents an oxidation degree similar to that achieved by chemical reduction of the graphite oxide. The purified and non‐purified graphene oxides were deposited onto silicon by means of a Langmuir–Blodgett (LB) methodology. The morphology of the LB films was analyzed by field emission scanning microscopy (FE‐SEM) and micro‐Raman spectroscopy. Our results show that the LB films built by transferring Langmuir monolayers at the liquid‐expanded state of the purified material are constituted by close‐packed and non‐overlapped nanoplatelets. The isotherms of the Langmuir monolayer precursor of the LB films were interpreted according to the Volmer’s model.     

Free‐Radical‐Promoted Conversion of Graphite Oxide into Chemically Modified Graphene

The preparation of chemically modified graphene (CMG) generally involves the reduction of graphite oxide (GO) by using various reducing reagents. Herein, we report a free‐radical‐promoted synthesis of CMG, which does not require any conventional reductant. We demonstrated that the phenyl free radical can efficiently promote the conversion of GO into CMG under mild conditions and produces phenyl‐functionalized CMG. This pseudo‐“reduction” process is attributed to a free‐radical‐mediated elimination of the surface‐attached oxygen‐containing functionalities. This work illustrates a new strategy for preparing CMG that is alternative to the conventional means of chemical reduction. Furthermore, the phenyl‐functionalized graphene shows an excellent performance as an electrode material for lithium‐battery applications.     

Graphene preparation and graphite exfoliation

The synthesis of Graphene is critical to achieving its functions in practical applications. Different methods have been used to synthesis graphene, but graphite exfoliation is considered the simplest way to produce graphene and graphene oxide. In general, controlling the synthesis conditions to achieving the optimum yield, keeping the pristine structure to realize on-demand properties, minimum layers with the smallest lateral size, and minimum oxygen content are the most obstacles experienced by researchers. Each application requires a specific graphene model, graphene oxides GO, or even graphene intercalated compounds (GIC) depending on synthesis conditions and approach. This paper reviewed and summarized the most researches in this field and focusing on exfoliation methods.