Reaction of electron deficient NN bonds with acyloxyketenes and mesoionic 1,3-dioxolium-4-olates: fast equilibrium between acyloxyketenes and mesoionic 1,3-dioxolium-4-olates

Reaction of azodicarboxylates with acyloxyketenes arising from dehydrochlorination of acyloxyphenylacetyl chlorides was carried out to give triacylamidine derivatives in good yields. The same triacylamidine derivatives were also obtained in good yields from the reaction with mesoionic 1,3-dioxolium-4-olates generated by Rh₂(OAc)₄-catalyzed decomposition of phenyldiazoacetic anhydride derivatives. Formation of the same compounds from different starting materials is explained by 1,3-dipolar addition between electron deficient NN bonds and mesoionic 1,3-dioxolium-4-olates, indicating fast equilibrium between acyloxyketenes and mesoionic 1,3-dioxolium-4-olates.     

Palladium complexes of N-aryl-2-pyridylamines

Palladium complexes of N-phenyl-2-pyridylamine (4) and dipyridylamine substrates (7, 11) have been studied. Due to the coordination ability of the pyridine-nitrogen atoms, the pyridyl substrates, 4, 7, 11 were subjected to Pd(OAc)₂ complexations and a number of N-aryl-2-pyridylamine Pd complexes (13-17) were isolated and characterised, in particular by NMR and ESI-MS. A new method for the preparation of the acetato-bridged six-membered ring palladacycle complex (13) of 4 is reported. The dipyridyl amines 7, 11 formed cis/trans bis-dentate acetato-bridged dimeric Pd₂Lig₂(OAc)₂ (14a,b/16a,b) and Pd₃Lig₂(OAc)₄ complexes (15a,b/17a,b). The N-aryl-2-pyridylamine substrates (4, 7, 11) were prepared by oxidative nucleophilic substitution, by 1,3-cycloaddition reaction or by Buchwald amination.     

A new dirhodium tetraacetate carbenoid: Synthesis, crystal structure and catalytic application

A new dirhodium tetraacetate II involving 1,3-bis(2,6-diisopropylphenyl)-imidazol-2-ylidene I was synthesized and characterized by general spectroscopic tools in the solution state as well as single X-ray crystallographic analysis in the solid state. The catalytic activity of dirhodium tetraacetate carbenoid II was tested for the allylic oxidation, and the improved reactivity to the allylic oxidation was observed compared to that of Rh₂(OAc)₄. The different electrochemical properties of dirhodium tetraacetate carbenoid II and Rh₂(OAc)₄ were compared via cyclic voltammetry.     

Rhodium(II)-catalyzed addition of 2-diazo(fluoroalkyl)acetoacetates to sulfides: a simple synthesis of stable sulfonium ylides

2-Diazo(fluoroalkyl)acetoacetates 1 reacted readily with many sulfides under mild reaction conditions in the presence of catalytic Rh₂(OAc)₄ affording to the corresponding sulfonium ylides. While thianthrene gave trans-thianthrenium 5,10-di(fluoroalkylacetoethoxycarbonyl)methylides (7a and 7b) under the same reaction condition, the structure of 7btrans-thianthrenium 5,10-di(bromodifluoroacetoethoxy-carbonyl)methylides was fully confirmed by spectral methods and X-ray single crystal diffraction analysis. All the ylide products obtained are fairly stable due to the strong electron-withdrawing properties of the fluorine atom.     

Total synthesis of (±)-camphorataimides and (±)-himanimides by NaBH4/Ni(OAc)2 or Zn/AcOH stereoselective reduction

Maleic anhydride 1 of Antrodia camphorate, which can be isolated from Chinese herbal medicine, is achieved in which the longest linear sequence is only five steps, in 40% overall yield from commercially available succinic anhydride. The crucial antrodimides 3 and 2 can be readily transformed by the chemoselective reduction with Zn/AcOH and NaBH₄/Ni(OAc)₂·4H₂O to afford the naturally occurring camphorataimides, 4 and 5, in high yields as well, respectively. This synthetic strategy can also be modified to give access to a variety of different maleic acid derivatives, himanimides 6-8.     

Regioselective Baeyer-Villiger lactonization of 2-substituted pyrrolidin-4-one. Synthesis of statine

Nine 2-substituted pyrrolidin-4-ones 4a-i were obtained via a series of functional group transformation of known prolinol 5 by facile six kinds of methodologies. The target structure of 1,3-amino alcohols 2a-i was constructed in the regioselective Baeyer-Villiger lactonization of ketones 4a-i and reduction of the resulting 4-substituted tetrahydro-1,3-oxazin-6-ones 3a-i. A new and straightforward synthesis of (3S,4S)-statine (6) has been established starting from trans-(2S,4R)-4-hydroxyproline (1).     

Regio- and stereoselective reactions of a rhodanine derivative with optically active 2-methyl- and 2-phenyloxirane

The reaction of a rhodanine derivative (=(Z)-5-benzylidene-3-phenyl-2-thioxo-1,3-thiazolidin-4-one; 1) with (S)-2-methyloxirane (2) in the presence of SiO₂ in dry CH₂Cl₂ for 10 days led to two diastereoisomeric spirocyclic 1,3-oxathiolanes 3 and 4 with the Me group at C(2) (Scheme 2). The analogous reaction of 1 with (R)-2-phenyloxirane (5) afforded also two diastereoisomeric spirocyclic 1,3-oxathiolanes 6 and 7 bearing the Ph group at C(3) (Scheme 3). The structures of 3, 4, 6, and 7 were confirmed by X-ray crystallography (Figs. 1 and 2). These results show that oxiranes react selectively with the thiocarbonyl group (CS) in 1. Furthermore, the nucleophilic attack of the thiocarbonyl S-atom at the SiO₂-activated oxirane ring proceeds with high regio- and stereoselectivity via an S_N2-type mechanism.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

A convenient one-pot synthesis of 2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives and their further transformations

The trifluoromethyl containing heterocycles, 2-hydroxy-4-aryl-3-(thien-2-oyl)-2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives 4, were synthesized via a one-pot three-component reaction of aldehyde 1 with 1,3-cyclohexanedione 2 and 4,4,4-trifluoro-1-(thien-2-yl)butane-1,3-dione 3 in the presence of a catalytic amount of Et₃N. The effect of bases and solvents on the reaction efficiency and yield was briefly investigated. Treatment of 4 with an excess amount of NH₄OAc in ethanol afforded 2-trifluoromethyl-1H-quinolin-5-one derivatives 5. Refluxing of 4 with TsOH in CHCl₃ gave the corresponding dehydrated products 8.     

Stabilization of the labile metal configuration in halfsandwich complexes [CpRh(PN)Hal]X

PN ligands 3 and 4, derived from 2-diphenylphosphanylmethylpyridine 2a, were synthesized, to which in the backbone a tether to a cyclopentadiene system and for comparison an ⁱPr substituent were attached. The chiral compounds were resolved by introduction of a menthoxy substituent into the 2-position of the pyridine system and/or palladium complexes with enantiomerically pure co-ligands. The tripod ligand 3b contains three different binding sites (Cp, P, N) connected by a resolved chiral carbon atom. (S_C)-configuration of this tripod ligand enforces (R_Rh)-configuration at the metal atom in the halfsandwich rhodium complex (L_Ment,S_C,R_Rh)-7b. The opposite metal configuration is inaccessible. Substitution of the chloro ligand in (L_Ment,S_C,R_Rh)-7b by halide (Br, I) or pseudohalide (N₃, CN, SCN) ligands occurs with retention of configuration to give complexes 8b-11b. However, in the reaction of (L_Ment,S_C,R_Rh)-7b with PPh₃ the pyridine arm of the tripod ligand in compound 13b becomes detached from the metal atom. In the Cp*Rh and CpRh compounds of the bidentate PN ligands 4a and 4b both metal configurations are accessible and in complexes 14a-17a and 14b-17b they equilibrate fast. The stereochemical assignments are corroborated by 9 X-ray analyses.     

Cycloaddition of methyl 2-(2,6-dichorophenyl)-2H-azirine-3-carboxylate to electron-rich 2-azadienes

tert-Butyldimethylsililoxy-2-aza-1,3-butadienes react with 2H-azirine 3 leading to Diels-Alder cycloadducts in moderate yields. The reactions are endo- and regioselective with the azirine being added by its less hindered face. There is only one product in the case of 1b, 4b. There are two isomers (4 and 5) from 1a, 1c and 1d. A different result was obtained with the diene 1e. Diene 1e formed products 4e and 8. Some of compounds 4 and 5 have been hydrolysed leading to functionalised aziridines 7. Compound 8 gave aziridine 9.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

Palladium-catalyzed oxyarylation of olefins using silver carbonate as the base. Probing the mechanism by electrospray ionization mass spectrometry

The Pd(OAc)₂-catalyzed oxyarylation of electron-rich (8 and 12) and electron-poor (10) olefins by ortho-iodophenols (3a-d) was studied using Ag₂CO₃ as the base, in acetone, and in the presence and absence of PPh₃. The corresponding adducts of oxyarylation were obtained in moderate yields. The reaction mechanism was examined by electrospray ionization mass spectrometry (ESI-MS). Cationic arylpalladium intermediate (14), formed by the oxidative insertion of Pd(0) into 3a, and the cationic palladacycles (15), obtained by reaction of 14 with olefins 8 and 12, were intercepted by ESI-MS and characterized by ESI-MS/MS.     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

Stereocontrolled conversion of some optically active (4S,5R)-dihydroisoxazoles into acyclic 3-acetamido-1,2-diols

Optically active (4S,5R)-dihydroisoxazoles 5a-c (90-91% ee) have been prepared by reaction of the epoxyketones 4a-c with hydroxylamine. Reduction of compounds 5a and 5b using lithium aluminium hydride took place exclusively from the Re face to give (1R,2S,3S)-1,3-disubstituted-3-aminopropane-1,2-diols 6a and 6b. These amino-diols were characterised by N-acetylation and the stereochemical sense of the hydride reduction was confirmed by conversion of amides 7a and 7b into α-amino acid derivatives 10a and 10b.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

A novel strategy for the expeditious synthesis of aryl-tethered highly congested 2-hydroxybenzyl alcohols from 2-pyranones

An efficient and simple synthesis of highly congested 2-benzyloxy-3-benzyloxymethyl-5-sec-aminobiphenyl-4-carbonitriles 3a-e has been delineated through base catalyzed ring transformation of 6-aryl-4-sec-amino-2H-pyran-2-one-3-carbonitriles 1 by 1,3-bisbenzyloxypropan-2-one 2. Debenzylation of both the O-benzyl groups of 3a-e with boron trichloride provided the corresponding diols, 2-hydroxy-3-hydroxymethyl -5-sec-aminobiphenyl-4-carbonitriles 4a-e in very good yields.     

Synthesis of functionalized bicyclo[3.2.1]octan-6-ones for diterpenoids: allylsilane directed Pummerer reaction: insertion reactions of diazoketones

The sulfide 5 underwent Pummerer cyclization to give 6, whereas the allyl silane analog 10 produced the bicyclo[3.2.1]octanones 11 and 11a. Extension of this methodology to 15 resulted in 16 without the necessity for allyl silane activation. The intermediate diazoketone 14 on treatment with BF₃·OEt₂ gave 17, 18 and 19, whereas the saturated adduct 22 on treatment with Rh₂(OAc)₄ gave 23.     

Syntheses and coordination behaviour of 2-(ortho-phosphinophenyl)-functionalised 1,3-dioxolanes and 1,3-dioxanes towards a [(COD)Rh]-complex fragment - models for immobilised complexes

The syntheses are reported of the ether-phosphine ligands: 2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane (1a), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane (1b), 2-(ortho-diphenylphosphinophenyl)-1,3-dioxane (1c), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane (1d). Their reaction with [(COD)RhCl]₂ (COD: 1,5-cyclooctadiene) results in the formation of the mononuclear complexes: {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2a), {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2b), {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2c), and {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2d). The chloride ligands of compounds 2a and 2b were abstracted with TlPF₆, with accompanied insertion of an acetal oxygen atom of the ligands 1a and 1b into the coordination sphere of the metal centre, producing {(COD)[η²-P,O-2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3a∗PF₆) and {(COD)[η²-P,O-2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3b∗PF₆). In contrast the dioxane analogues of 3, 3c∗BF₄ and 3d∗BF₄, were formed by reacting the ligands 1c, 1d with [Rh(COD)₂]BF₄. The ligands 1 and the complexes 2 serve as model compounds for their via acetalation to a polyvinylalcohol resin bound analogues. The complexes synthesised were employed as pre-catalysts in the hydroformylation reaction of 1-octene.