Glucose-induced heat production, insulin secretion and lactate production in isolated Wistar rat pancreatic islets

Transplantation of pancreatic islets is efficient in improving the metabolic control and quality of life and in preventing severe hypoglycemia in patients with brittle type 1 diabetes mellitus. More accurate methods to assess islet viability would be extremely useful in designing target interventions for islet cytoprotection and in reducing the number of islets required to achieve insulin independence. Here we report on an application of calorimetry to evaluate the metabolic response of pancreatic islets to glucose stimulation. A significant increase in metabolic heat was produced by islet samples when consecutively subjected to 2.8 and 16.3 mmol L⁻¹ glucose. Under these glucose concentrations, 1000 islets released average heat values of 9.16 ± 0.71 mJ and 14.90 ± 1.21 mJ over 50 min, respectively. Additionally, the glucose stimulation indexes were 1.67 ± 0.30 for insulin, 1.72 ± 0.13 for heat and 2.91 ± 0.50 for lactate, raising the important possibility of substituting the secreted insulin index/ratio by the index/ratio of the heat released in the evaluation of Langerhans islets viability for transplantation. Altogether, our results demonstrate the applicability of calorimetry to assess the quality of isolated pancreatic islets and to study vital islet functions.     

Detoxification of antimony by selenium and their interaction in paddy rice under hydroponic conditions

Antimony (Sb) contamination has become a growing concern in recent years. Strategies for reducing Sb contamination and its related health risks are urgently desired. This study was conducted to explore the possibility of selenium (Se) detoxification on Sb toxicity in paddy rice in order to find a feasible method to reduce the health risk of Sb pollution. Seedlings of paddy rice were exposed to 5 mg L⁻¹ Sb (KSbC₄H₄ O₇·1/2H₂O), in the presence of Se (Na₂SeO₃) at 0.1, 1, 5 mg L⁻¹ in culture solution, with no Sb and Se addition as the control. Paddy rice took up Sb greatly and the highest Sb contents measured among all treatments in this experiment in the leaves, stems and roots were 65.5, 298.5 and 195.7 mg kg⁻¹, respectively. Without Sb addition in the solution, single exposure to 0.1 mg L⁻¹ Se remarkably reduced the malondialdehyde (MDA) formation in paddy rice,demonstrating the beneficial effect of Se at low dosages. The addition of 5 mg L⁻¹ Sb was found to generate toxicity to paddy rice, showing as decreased biomass and increased leaf MDA content in paddy rice, while addition of 1 mg L⁻¹ Se mitigated the toxicity of Sb, as seen with the decreased leaf MDA content and increased biomass, indicating antidotal role of Se to Sb. In addition, the presence of 0.1, 1, 5 mg L⁻¹ Se generally decreased the accumulation of Sb in the leaves, stems and roots in paddy rice. Toxicity was also seen when paddy rice was exposed to single Se at 1 and 5 mg L⁻¹ levels, however, 5 mg L⁻¹ Sb addition was found to decrease the contents of Se in the leaves/stems whereas increased them in roots, accompanied with decreased MDA contents and increased biomass in paddy rice, indicating a possible detoxification role of Sb to Se too. Therefore, Sb, although toxic, could also be an antitoxin to Se in paddy rice at certain condition. Our results showed that Se could alleviate Sb toxicity efficiently in paddy rice through two effects as antagonism and antioxidation.     

Phosphonobetaine/sulfur dioxide copolymer by Butler’s cyclopolymerization process

The zwitterionic monomer, ethyl 3-(N,N-diallylammonio)propanephosphonate and sulfur dioxide were cyclocopolymerized in DMSO using azobisisobutyronitrile or ammonium persulfate as initiators to afford a pH-responsive polyphosphonobetaine/SO₂ (PPB/SO₂) copolymer. The polymers, on treatment with HCl and NaOH, gave the aqueous solutions of the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The solution properties of the PPB having two pH-responsive functionalities were investigated in detail by potentiometric and viscometric techniques. Basicity constants of the amine and phosphonate groups in APP were found to be “apparent” and as such follow the modified Henderson–Hasselbalch equation. The incorporation of SO₂ moiety has resulted in the decrease of basicity constant of the nitrogens in the copolymer by staggering ?2 units of log K in compare to that of the corresponding homopolymer. The basicity difference is expected to have an effect on the chelating properties of the polymers. In contrast to many polycarbo- and -sulfobetaines, the PPB was all found to be soluble in salt-free water as well as in salt (including Ca²⁺ and Li⁺)-added solutions. The PPB demonstrated ‘antipolyelectrolyte’ viscosity behavior and found to have higher viscosity values in LiCl than in NaCl or NaI.     

Prion protein detection in serum using micromechanical resonator arrays

Prion proteins that have transformed from their normal cellular counterparts (PrP^c) into infectious form (PrP^res) are responsible for causing progressive neurodegenerative diseases in numerous species, such as bovine spongiform encephalopathy (BSE) in cattle (also known as mad cow disease), scrapie in sheep, and Creutzfeldt-Jakob disease (CJD) in humans. Due to a possible link between BSE and CJD it is highly desirable to develop non-invasive and ante mortem tests for the detection of prion proteins in bovine samples. Such ante mortem tests of all cows prior to slaughter will help to prevent the introduction of PrP^res into the human food supply. Furthermore, detection of PrP^res in donated blood will also help to prevent the transmission of CJD among humans through blood transfusion. In this study, we have continued development of a micromechanical resonator array that is capable of detecting PrP^c in bovine blood serum. The sensitivity of the resonators for the detection of PrP^c is further enhanced by the use of secondary mass labels. A pair of antibodies is used in a sandwich immunoassay format to immobilize PrP^c on the surface of resonators and attach nanoparticles as secondary mass labels to PrP^c. Secondary mass labeling is optimized in terms of incubation time to maximize the frequency shifts that correspond to the presence of PrP^c on the surface of resonators. Our results show that a minimum of 200 pg mL⁻¹ of PrP^c in blood serum can be detected using micromechanical resonator arrays.     

Elemental composition and fatty acid profile of the edible fruits of Amatungula (Carissa macrocarpa) and impact of soil quality on chemical characteristics

The Amatungula fruit, from Carissa macrocarpa, is commonly consumed by the local people of KwaZulu-Natal (KZN), South Africa. Levels of elements in the fruit were determined to assess if they conform to recommended dietary allowances (RDAs) and to assess for potential toxicities. Soils and fruit samples from nine sites in eastern KZN were investigated. Concentrations of elements in the fruit were found to be in the order of Ca > Mg > Fe > Mn ≈ Cu ≈ Pb > Se > Cr > Ni > Zn. For the elements in focus, except for Pb, all of the elements found in the fruit contribute significantly towards the RDAs. Lipid profiling was also done to determine the fruits potential as a source of essential fatty acids. The fruit was rich in monounsaturated and essential fatty acids with the linoleic acid to α-linolenic acid ratio conforming to the recommended range for cardiac health. Concentrations of elements in soil had no significant effect on plant concentrations, but competition between elements in soil influenced their availability. Total soil concentrations of most metals studied have significantly correlated Pb availability, indicating the impact of these metals on Pb availability. The Amatungula fruit showed tendency to accumulate Pb, with Pb levels in fruit at all sites being toxic to human health. Site location had a major effect on plant concentrations however uptake and distribution was primarily dependent on the plants inherent controls, as evidenced by the accumulation and exclusion of elements, to meet its physiological requirements.     

Molar volumes and ion pairing of lithium halides in alcohols

The concentration dependence of the apparent molar volumes of lithium halides (and electrolytes in general) in alcohols (and solvents permitting association in general) is, in the first instance, due to changes in the degree of association and to the inherent difference between the apparent molar volumes of the ions and of the ion pairs. Previous publications on the molar volumes of electrolytes in organic solvents, disregarding altogether ion pairing, appear to be incorrect. Data from the literature for lithium chloride and lithium bromide in normal primary alcohols and several branched alcohols from C₁ to C₈ and data from our laboratory for lithium halides in 1-hexanol and 2-ethyl-1-hexanol served for the determination of φ _V and φ _E . Electrical and structural contributions to the values of these functions for the ions and for the ion pairs are discussed.     

Ion-beam irradiation effects on polyimide-UV–vis and infrared spectroscopic study

Ion-beam irradiation effects on polyimide, Kapton™, were studied with respect to optical and electronic properties. Stack films of Kapton™ (12.5 μm thick) were irradiated to various ion beams in air or vacuo at room temperature and subjected to ultraviolet–visible (UV–vis) spectroscopy, and change in absorbance and energy gap is discussed. The UV–vis absorption spectrum, which is assigned to the transition of electrons in benzene rings from π to π* orbital, upon He²⁺ (6 MeV/u) irradiation in air, shifted towards longer wavelength direction for all cases, and the shift was more obvious for higher linear energy transfer (LET) ion beams. The energy gap of the transition was estimated, and the H⁺ and He²⁺ ion beams caused little change in the transition energy gap Eg, while the heavier ions such as C⁶⁺ and Si¹⁴⁺ caused more significant decrease. This decrease is assumed to the structural changes around benzene rings, and the infrared spectroscopy revealed breakage in imide groups next to benzene ring in the repeating unit of polyimide.     

Development and Validation of Liquid Chromatography-Tandem Mass Spectrometry Methods for the Quantification of Cefquinome,Ceftiofur, and Desfuroylceftiofuracetamide in Porcine Feces with Emphasis on Analyte Stability

Cefquinome and ceftiofur are β-lactam antibiotics used for the treatment of bacterial infections in swine. Although these antimicrobials are administered intramuscularly, the exposure of the gut microbiota to these cephalosporins is not well described. This exposure can contribute to the emergence and spread of antimicrobials in the environment and to the possible spread of antimicrobial resistance genes. To assess the impact of drug administration on the intestinal excretion of these antimicrobials it is essential to measure the amounts of native compound and metabolites in feces. Two (ultra)-high-performance liquid chromatography-tandem mass spectrometry ((U)HPLC–MS/MS) methods were developed and validated, one for the determination of cefquinome and ceftiofur and the other for the determination of ceftiofur residues, measured as desfuroylceftiofuracetamide, in porcine feces. The matrix-based calibration curve was linear from 5 ng g⁻¹ to 1000 ng g⁻¹ for cefquinome (correlation coefficient (r) = 0.9990 ± 0.0007; goodness of fit (gof) = 3.70 ± 1.43) and ceftiofur (r = 0.9979 ± 0.0009; gof = 5.51 ± 1.14) and quadratic from 30 ng g⁻¹ to 2000 ng g⁻¹ for desfuroylceftiofuracetamide (r = 0.9960 ± 0.0020; gof = 7.31 ± 1.76). The within-day and between-day precision and accuracy fell within the specified ranges. Since β-lactam antibiotics are known to be unstable in feces, additional experiments were conducted to adjust the sampling protocol in order to minimize the impact of the matrix constituents on the stability of the analytes. Immediately after sampling, 500 µL of an 8 µg mL⁻¹ tazobactam solution in water was added to 0.5 g feces, to reduce the degradation in matrix.     

Thermal stability of solid and aqueous solutions of humic acid

The effects of temperature on the stability of a soil humic acid were studied in the present work. Solid samples of Gohy-573 humic acid (HA) and dissolved ones in aqueous solution (pH 6.0, 0.1 mol L⁻¹ NaClO₄) were investigated in order to understand the impact of temperature on the chemical properties of the material. The methods applied to solid samples in the present investigation were thermogravimetric analysis (TGA), temperature-programmed desorption coupled with mass spectrometry (TPD-MS), and in situ diffuse reflectance infrared Fourier transformed spectroscopy (in situ DRIFTS). Humic acid samples were studied in the 25-800 °C range, with focus on thermal/chemical processes up to 250 °C. The reversibility of the changes observed was investigated by cyclic changes to specified temperature ranges (40-110 °C). All measurements were conducted under inert-gas atmosphere in order to avoid samples combustion at increased temperatures. Aqueous solutions were analyzed by UV-vis absorption spectroscopy after storage at temperatures up to 95 °C, and storage times up to 1 week. For temperatures below 100 °C experiments on solid and aqueous samples have shown results which were consistent to each other. The amount of water desorbed is temperature dependent and up to 70 °C this process was totally reversible. Above 70 °C an irreversible loss of water was also observed, which according to UV-vis spectroscopy corresponds to water produced by condensation leading to more condensed polyaromatic structures. The water released up to 110 °C was about 7 wt% of the total mass of the dried humic acid, where less than 50% corresponded to reversibly adsorbed water. At higher temperatures (>110 °C), gradual decomposition resulting in the formation of carbon dioxide (110-240 °C), and carbon monoxide (140-240 °C) takes place. Hence, thermal treatment of Gohy-573 humic acid above 70 °C results in irreversible structural changes, that could affect chemical properties (e.g., complex formation) of the material.     

Effect of surfactants on the voltammetric response and determination of an antihypertensive drug

The effect of adding surface-active agents to electrolytes containing terazosin, an antihypertensive drug, on the voltammetric response of glassy carbon electrode was studied. The current signal due to the oxidation process was a function of the amount of terazosin, pH of the medium, type of surfactant, and accumulation time at the electrode surface. Two surfactants were used, an anionic type, sodium dodecyl sulfate (SDS) and a cationic type, cetyl trimethyl ammonium bromide (CTAB). Addition of SDS to the terazosin-containing electrolyte was found to enhance the oxidation current signal while CTAB showed an opposite effect. Beside the interfacial interaction of the surfactant with the electrode surface in reference to the bias applied potential and the charge of surfactant, terazosin-surfactant interaction in the electrolytic solution was found to be critical to the magnitude of current signal. Addition of SDS to terazosin-containing buffer solution resulted in a decrease in the drug absorption spectrum both in the ultra-violet and visible (UV-vis) regions. Moreover, NMR measurements showed considerable chemical shifts for the aromatic protons of the quinazolinyl moiety of the terazosin in presence of SDS. The affected aromatic protons are positioned next to the interacting protonated amino-group of the terazosin with the charged sulfonate-group of SDS. On the other hand, addition of CTAB did not cause noticeable changes both to the UV-vis and NMR spectra of the drug. The use of SDS in the electrochemical determination of terazosin using linear sweep voltammetry and differential pulse voltammetry at solid glassy carbon electrode enhanced the detection limit from 6.00 × 10⁻⁷ mol L⁻¹ in absence of surfactant to 4.58 × 10⁻⁹ mol L⁻¹ when present. The validity of using this method in the determination of drug active ingredient in urine samples and tablet formulations was also demonstrated.     

A vibrational study of the nature of hydroxyl groups chemical bonding in two aluminium hydroxides

Lengths, strengths and valences of OH bonds in the two aluminium hydroxides gibbsite and bayerite were determined on the basis of vibrational spectral data. The uncoupled OD stretching modes in the range 2400–2800 cm⁻¹ were recorded by means of infrared diffuse reflectance, thereby avoiding effects of surface, vibrational coupling or particle shape. The assignment of the corresponding Raman spectra resulted in the determination of harmonic wavenumbers, force constants and anharmonicity coefficients of bulk OH groups in the two minerals. OH bond lengths deduced from these data varied from 0.964 Å to 0.975 Å in gibbsite and 0.962 Å to 0.973 Å in bayerite. These lengths appear to correspond to weak H-bonds contrary to previously recognized data from X-ray diffraction and neutron diffraction studies. Finally, bond valences were calculated on the basis of these new bond lengths and discussed as a function of crystallographic structures and the nature of hydrogen bonding in these two structures.     

Biotin-avidin mediated competitive enzyme-linked immunosorbent assay to detect residues of tetracyclines in milk

Tetracycline (TC) antibiotics are widely used for prevention and control of disease because they inhibit the growth of bacteria. However, the presence of TC antibiotics residues in food causes harmful effects on consumer's health such as allergic reactions, liver damage and gastrointestinal disturbance, so that many countries have set MRLs (maximum residue levels). Therefore, it is necessary to detect tetracycline residues, to develop suitable analytical techniques to be used as routine screens and field detection.A new approach to the biotin-avidin mediated competitive ELISA is developed to determine tetracycline residues in milk. After optimization, the LOD and LOQ were 1.0 × 10^− 10 M (0.048 μg/L) and 1.0 × 10^− 9 M, respectively, and the working range from 3.16 × 10^− 10 M to 3.16 × 10^− 7 M toward TC in milk. No cross-reactivity was observed with the structurally similar compounds; chlortetracycline (13.7%), oxytetracycline (10%) and doxytetracycline (< 1%). Additionally percent recoveries of TC spiked in milk were quite satisfactory (∼ 90%). Comparing our results obtained in this work with others, it shows with the capability to detect TC ranging in MRLs (100 μg/L in milk) sufficiently with highly sensitivity in milk, and with simple pre-treatment. In addition, this method can apply to developing useful ELISA test kit for determination of TCs in milk.     

Effect of the Heating Rate on Crystallization Kinetics of Mg84Ni12.5Y3.5 Amorphous Ribbons

Crystallization kinetics of Mg₈₄Ni_12.5Y_3.5 amorphous ribbons produced by the melt-spinning method, was studied by DSC analysis and X-ray diffraction. The effect of heating rate (from 2 to 240 K min^–1) was investigated in the temperature range from 298 to 673 K. The results showed that the crystallization process took place in two stages: a) crystallization of part of the amorphous matrix to an intermediate phase and hcp-Mg, and b) transformation of the intermediate phase and the remaining amorphous material to Mg₂Ni+Mg (solid solution of Y in Mg). Increasing the heating rate from 2 to 240 K min^–1 results in increases of the temperature difference between the two-step crystallization of the first stage transformation processes from 33 to 56 K and in increases of the temperature difference between the two-stage transformation from 62 to 97 K.This revised version was published online in November 2005 with corrections to the Cover Date.     

Highly stereoselective anti-aldol reactions catalyzed by simple chiral diamines and their unique application in configuration switch of aldol products

Chiral derivatives of trans-1,2-diaminocyclohexane with different N,N-dialkyl groups in well-defined orientations have been synthesized, and applied as catalysts for the asymmetric aldol reaction between a variety of aldehydes and ketones. Enantiomeric catalyst 1j catalyzed the reaction in ethanol and provided excellent diastereoselectivity and enantioselectivity. Significantly, simple replacement of organic solvents with water switched the products of the aldol reactions from anti to syn configuration. Such catalytic reactions led to the products with anti to syn diastereoselectivity up to 99:1 in ethanol, while in water gave the products with syn to anti diastereoselectivity up to 99:1.     

Solubility of β-carotene in ethanol- and triolein-modified CO2

Modification of an experimental device and methodology improved speed and reproducibility of measurement of solubility of β-carotene in pure and modified SuperCritical (SC) CO₂ at (313 to 333) K. Solubilities of β-carotene in pure CO₂ at (17 to 34) MPa ranged (0.17 to 1.06) μmol/mol and agreed with values reported in literature. The solubility of β-carotene in CO₂ modified with (1.2 to 1.6) % mol ethanol increased by a factor of 1.7 to 3.0 as compared to its solubility in pure CO₂ under equivalent conditions. The concentration of triolein in equilibrated ternary (CO₂ + β-carotene + triolein) mixtures having excess triolein reached values (0.01 to 0.39) mmol/mol corresponding to its solubility in pure SC CO₂ under equivalent conditions. Under these conditions, the solubility of β-carotene in triolein-modified CO₂ increased by a factor of up to 4.0 in relation with its solubility in pure CO₂ at comparable system temperature and pressure, reaching an uppermost value of 3.3 μmol/mol at 333 K and 32 MPa. Unlike in the case of ethanol, where enhancements in solubility where relatively independent on system conditions, solubility enhancements using triolein as co-solvent increased markedly with system pressure, being larger than using (1.2 to 1.6) % mol ethanol at about (24 to 28) MPa, depending on system temperature. The increase in the solubility β-carotene in SC CO₂ as a result of using ethanol or triolein as co-solvent apparently does not depend on the increase in density associated with the dissolution of the co-solvent in CO₂. Enhancements may be due to an increase in the polarizability of SC CO₂, which possibly growths markedly as triolein dissolves in it when the system pressure becomes higher.     

Fluorescence quantification of tetracycline in the presence of quenching matrix effect by means of a four-way model

In this work, a four-way tensor is used to model the quenching effect in fluorescent measurements. By means of the analysis of excitation-emission matrices obtained in the determination of tetracycline in tea, which acts as quencher, it is shown as the impossibility to use a calibration, or an addition standard based on a three-way model. It is analysed the quencher multiplicative effect made on the tetracycline signal by means of an ANOVA. However, by arranging the experimental data in a four-way tensor, it is viable to perform a calibration based on the parallel factor analysis, PARAFAC, decomposition and a four-way partial least squares, 4-PLS, regression to quantify the tetracycline in the presence of the matrix quencher effect. 4-PLS calibration provides better results. In the range from 40 to 220 μg L⁻¹ gives an average of relative errors in absolute value equal to 8.02% in prediction (3.40% in calibration). The repeatability as standard deviation in this range is 5.08 μg L⁻¹ and the method is accurate, slope and intercept being statistically equal to 1 and 0, respectively when a regression calculated versus true concentration is performed. Moreover, it has a decision limit (CCα) of 13.87 μg L⁻¹ for a probability of false positive, α, equal to 0.05 and a capability of detection (CCβ) of 26.63 μg L⁻¹ (for probabilities of false positive, α, false negative, β, equals to 0.05).     

Enzyme Catalysis Induced Polymer Growth in Nanochannels: A New Approach to Regulate Ion Transport and to Study Enzyme Kinetics in Nanospace

Method that could regulate the ion transport in nanochannel in an efficient and rapid manner is still a challenge. Here, we introduced enzyme‐catalysis‐induced polymer growth in nanochannels to develop a new method to regulate the ion transport and evaluate the enzyme catalysis kinetics in nano‐space. As a model enzyme, Horseradish peroxidase (HRP) was immobilized in the nanochannels through a volume‐controlled‐drying method. In the presence of H₂O₂, HRP catalyzed o‐phenylenediamine (o‐PD) to trigger its polymer growth, in turn blocked the ion transport and led to the decrease of the ion current. Taking advantages of the high efficiency of enzyme catalysis and the nano‐confinement of nanochannels, the system readily achieved blocking ratios of ion current even reaching 99.6 % of the initial. Based on above concept, we developed a new method to evaluate the enzyme catalysis kinetics in nano‐confined space. By comparing with those in free state in solution and absorbed on planar surface, HRP confined in nanochannels presented similar apparent Michaelis constant (K_m) values for the substrate H₂O₂ but much higher K_m values for the substrate o‐PD, due to the steric hindrance and diffusion suppression. The enzyme‐catalysis‐induced polymerization in nanochannels might lead to new concept for the nano‐blocking/switching and provide a new platform for single molecule analysis and detection.     

Development,standardization and refinement of procedures for evaluating effects of endocrine active compounds on development and sexual differentiation of <Emphasis Type="Italic">Xenopus laevis</Emphasis>

Xenopus laevis has been introduced as a model to study effects of endocrine-active compounds (EAC) on development and sexual differentiation. However, variable and inconsistent data have raised questions about the reliability of the test methods applied. The current study was conducted in two laboratories to develop, refine, and standardize procedures and protocols. Larvae were exposed in flow-through systems to 17β-estradiol (E2), at concentrations from 0.2 to 6.0 μg E2 L⁻¹ in Experiment 1A, and 0.015 to 2.0 μg E2 L⁻¹ in Experiment 1B. In both studies survival (92%, 99%) and percentage of animals that completed metamorphosis (97%, 99%) indicated reproducible biological performance. Furthermore, minor variations in husbandry led to significant differences in snout-to-vent length, weight, and gonad size. In Experiment 1A, almost complete feminization occurred in all E2 treatment groups whereas a concentration response was observed in Experiment 1B resulting in an EC₅₀ of 0.12 μg E2 L⁻¹. The final verified protocol is suitable for determining effects of EAC on development and sexual differentiation in X. laevis.     

Pharmaceuticals and Their Main Metabolites in Treated Sewage Sludge and Sludge-Amended Soil: Availability and Sorption Behaviour

This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g⁻¹ dm), ibuprofen (45 ng g⁻¹ dm) and carbamazepine (9.3 ng g⁻¹ dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge–soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log K_d ranged from −1.55 to 1.71 in sludge samples and from −0.29 to 1.18 in soil–sludge mixtures. The log K_d values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.     

Diels-Alder reaction volumes in the solid state and solution

The densities of anthracene, tetracyanoethylene, maleic anhydride, N-phenylmaleineimide, trans, trans-1,4-diphenylbuta-1,3-diene, and their Diels-Alder adducts were measured in the solid state and in solution at 25 °C. The reaction volumes in the solid state were calculated from the difference in molar volumes. They turned out to be low, close to each other (–4 to –11 cm³ mol^–1), and slightly different from the reaction volumes (–8±1 cm³ mol^–1) calculated from the van der Waals radii. The reaction volumes in solutions (–15 to –32 cm³ mol^–1) were found from the difference in partial molar volumes of the reactants in dioxane, acetonitrile, and 1,2-dichloroethane, The experimental Diels-Alder reaction volumes in solution are determined not only by the formation of new bonds in an adduct: a considerably higher contribution (to 75%) is made by a change in the volume of intermolecular empty spaces in solution on going from reactants to adducts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2386–2390, November, 2004.