The inevitable accumulation of large ions and neutral molecules near hydrophobic surfaces and small ions near hydrophilic ones

The present contribution offers a unified explanation to three central phenomena in physical chemistry of interfaces in contact with aqueous solution: (1) Accumulation of large anions at the air/water interface. (2) Accumulation of neutral gas molecules near hydrophobic surfaces and the resulting hydrophobic interaction between two such surfaces, and (3) The Hofmeister effect, namely, the enhanced propensity of small ions to hydrophilic surfaces and large ions to hydrophobic surfaces. The common thread linking these phenomena is the free energy balance between ion or molecule hydration in solution and the cost of localizing these objects at the water-surface interface. Comparing the results of an abstract lattice-gas model to force spectroscopy data collected by AFM we reveal the underlying principles and demonstrate their universality.     

Surface tension and adsorption of electrolytes at the aqueous solution-gas interface

The surface tension of aqueous solutions of hydrogen, sodium, and potassium chlorides was measured. The excess adsorption isotherms for electrolyte adsorption at the liquid-gas interface were obtained. The dependence of the surface tension on the solute concentration exhibits an extremal character, with the onset surface-inactivity of electrolytes being observed at concentrations above 0.3 M. The composition of the surface layer was demonstrated to be governed by the energy of solvation, while the extrema in the surface tension and excess adsorption isotherms are associated with the behavior of individual ions in the adsorption layer of the interphase interface.     

Interaction of monovalent ions with hydrophobic and hydrophilic colloids: charge inversion and ionic specificity

Here we study experimentally and by simulations the interaction of monovalent organic and inorganic anions with hydrophobic and hydrophilic colloids. In the case of hydrophobic colloids, our experiments show that charge inversion is induced by chaotropic inorganic monovalent ions but it is not induced by kosmotropic inorganic anions. For organic anions, giant charge inversion is observed at very low electrolyte concentrations. In addition, charge inversion disappears for both organic and inorganic ions when turning to hydrophilic colloids. These results provide an experimental evidence for the hydrophobic effect as the driving force for both ion specific effects and charge inversion. In the case of organic anions, our molecular dynamics (MD) simulations with full atomic detail show explicitly how the large adsorption free energies found for hydrophobic colloids are transformed into large repulsive barriers for hydrophilic colloids. Simulations confirm that solvation free energy (and hence the hydrophobic effect) is responsible for the build up of a Stern layer of adsorbed ions and charge inversion in hydrophobic colloids and it is also the mechanism preventing charge inversion in hydrophilic colloids. Overall, our experimental and simulation results suggest that the interaction of monovalent ions with interfaces is dominated by solvation thermodynamics, that is, the chaotropic/kosmotropic character of ions and the hydrophobic/hydrophilic character of surfaces.     

Thermodynamic study of small hydrophobic ions at the water-lipid interface

The thermodynamics of binding of two small hydrophobic ions such as norharman and tryptophan to neutral and negatively charged small unilamellar vesicles was investigated at pH 7.4 using fluorescence spectroscopy. Vesicles were formed at room temperature from dimyristoyl phosphatidylcholine (DMPC) or DMPC/dimyristoylphosphatidic acid and DMPC/dimyristoylphosphatidylglycerol. The changes in fluorescence properties were used to obtain association isotherms at variable membrane surface negative charge and at different ionic strengths. The binding of both ions was found to be quantitatively enhanced as the percentage of negative phospholipid increases in the membrane. Also, a decrease in ion binding was found to occur as the concentration of monovalent salt was increased (0.045-0.345 M). If electrostatic effects were ignored, the experimental data showed biphasic behavior in Scatchard plots. When electrostatic effects were taken into account by means of the Gouy-Chapman theory, the same data yielded linear Scatchard plots that were described by a simple partition equilibrium of the hydrophobic ion into the lipid-water interface. We demonstrate that the effective interfacial charge, nu, of the ion is a determinant factor to obtain a unique value of the intrinsic (hydrophobic) binding constant independently of the surface charge density of the lipid membrane.     

Decoupling the effects of hydrophilic and hydrophobic moieties at the neuron–nanofibre interface

Peptide-based nanofibres are a versatile class of tunable materials with applications in optoelectronics, sensing and tissue engineering. However, the understanding of the nanofibre surface at the molecular level is limited. Here, a series of homologous dilysine–diphenylalnine tetrapeptides were synthesised and shown to self-assemble into water-soluble nanofibres. Despite the peptide nanofibres displaying similar morphologies, as evaluated through atomic force microscopy and neutron scattering, significant differences were observed in their ability to support sensitive primary neurons. Contact angle and labelling experiments revealed that differential presentation of lysine moieties at the fibre surface did not affect neuronal viability; however the mobility of phenylalanine residues at the nanofibre surface, elucidated through solid- and gel-state NMR studies and confirmed through tethered bilayer lipid membrane experiments, was found to be the determining factor in governing the suitability of a given peptide as a scaffold for primary neurons. This work offers new insights into characterising and controlling the nanofibre surface at the molecular level.

The mobility of hydrophobic moieties at a peptide nanofibre surface determines its suitability as a scaffold for sensitive primary cells.     

Adsorption of codeine on hydrophilic silica and silica surface modified by hydrophobic groups in the presence of electrolytes

The adsorption of codeine from aqueous solution onto colloidal silica and silica surface-modified with chemiadsorbed octadecyl dimethyl silane (ODDMS) or dimethyl silane (DMS) groups was studied in the presence of neutral electrolytes at different pH values. From codeine-hydrochloride solutions codeine cations are strongly bound to negatively charged silica surfaces. Inorganic salts (NaCl, NaNO₃) reduce the adsorption of the organic cation. On silica modified by ODDMS (10% of surface silanol groups are occupied), codeine cations are adsorbed to a higher extent at pH 6, while at pH 8 the adsorbed amounts are lower than on the bare silica surface. Neutral electrolytes reduce codeine adsorption on the ODDMS modified silica. On the hydrophobic silica, completely covered by DMS groups, codeine adsorption is considerably lower than on the bare silica, but neutral salts increase the adsorption. The adsorption of codeine is compared with the adsorption of aggregating surfactant ions. Common and different features of their interactions with silica surfaces are outlined.     

Volta potential at metal-solid salt interface and real potentials of ions in solid electrolytes

Experimental conditions and results of investigations of Volta potentials of metal-solidelectrolyte and solid electrolyte-aqueous electrolyte solution by means of the dynamic condenser method are presented. These investigations were made for silver-silver halides and silver-silver nitrate as well as for cadmium-cadmium halide systems. On the basis of measured Volta potentials the real potentials of ions in these solid electrolytes are calculated. These real potentials are the ionic components of the crystalline lattice energy in the sense of the Gibbs energy.     

Competitive adsorption of surfactants and hydrophilic silica particles at the oil-water interface: interfacial tension and contact angle studies

The effect of surfactants' type and concentration on the interfacial tension and contact angle in the presence of hydrophilic silica particles was investigated. Silica particles have been shown to have an antagonistic effect on interfacial tension and contact angle in the presence of both W/O and O/W surfactants. Silica particles, combined with W/O surfactant, have no effect on interfacial tension, which is only dictated by the surfactant concentration, while they strongly affect interfacial tension when combined with O/W surfactants. At low O/W surfactant, both particles and surfactant are adsorbed at the interface, modifying the interface structure. At higher concentration, interfacial tension is only dictated by the surfactant. By increasing the surfactant concentration, the contact angle that a drop of aqueous phase assumes on a glass substrate placed in oil media decreases or increases depending on whether the surfactant is of W/O or O/W type, respectively. This is due to the modification of the wettability of the glass by the oil or water induced by the surfactants. Regardless of the surfactant's type, the contact angle profile was dictated by both particles and surfactant at low surfactant concentration, whereas it is dictated by the surfactant only at high concentration.     

Quantitative determination of surface energy using atomic force microscopy: the case of hydrophobic/hydrophobic contact and hydrophilic/hydrophilic contact

Atomic force microscopy (AFM) has been used to determine the surface energy of chemically modified surfaces at a local scale. In order to achieve this aim, it was necessary to graft both the AFM tip and the substrate with the same chemical functional groups. Two different organothiols terminated either by hydrophilic or hydrophobic chemical functionalities were used. Grafting process classically reported shows that after UV/ozone treatment for 30 min, the tip is coated by thermal deposition with 4‐5‐nm‐thick titanium layer followed by a 30‐nm‐thick gold layer. Finally, the tip is grafted by organothiols. The thickness of the layer deposited on the tip is of the same order of magnitude as the tip radius. To avoid the use of Ti and to decrease the thickness of the gold layer, we have developed a new way of grafting by using organic molecules like (3‐mercaptopropyl)triethoxysilane (MPS) as a linkage agent. Then this way of grafting was checked. Finally, AFM force‐distance curves, between grafted tips and chemically modified surface, were carried out in contact mode. Calibration of the various parts of the apparatus and especially of the cantilever (spring constant and tip radius) is of major importance to reach quantitative data. Finally, by applying a suitable theory of contact, we were able to determine the surface energy of our system. Copyright © 2005 John Wiley & Sons, Ltd.     

Functionalized hydrophobic and hydrophilic self-assembled supramolecular rectangles

The synthesis of six new, functionalized 180 degrees pyridyl donor ligands and their coordination-driven self-assembly into supramolecular rectangles is reported. Three of the new donors have been functionalized with hydrophobic straight chain alkane units (C6, C12, and C18) while the remaining three have been functionalized with derivatized di-, tetra-, and hexaethylene glycol hydrophilic units (DEG, TEG, and HEG, respectively). The resulting self-assembled hydrophobic and hydrophilic supramolecular rectangles have been fully characterized by multinuclear NMR and electrospray ionization mass spectrometry. Molecular force field modeling suggests that the functionalized rectangles range in size from roughly 3.0 x 2.9 to 3.0 x 6.0 nm2 in size.     

Surface patterned graft copolymerization of hydrophilic monomers onto hydrophobic polymer film upon UV irradiation

A random copolymer [p(MMA/DMAB)] composed of methyl methacrylate (MMA) and 2,2‐dimethoxy‐1,2‐di(4‐methacryloyloxy)phenylethane‐1‐one (DMAB), which can simultaneously act as a photoradical initiator and crosslinkable monomer, was prepared by free radical random copolymerization. A hydrophobic film on quartz glass was prepared using p(MMA/DMAB) by a spin‐coating technique. Hydrophilic methacrylic acid (MA) and 2‐methacryloyloxyethyl phosphorylcholine (MPC) were graft‐copolymerized from the hydrophobic p(MMA/DMAB) film in water by photo‐cleavage of the DMAB unit. The graft copolymer of MA and MPC was characterized by infrared and X‐ray photoelectron spectroscopies and contact angle measurements. To confirm that MPC can be grafted onto the surface of the film selectively at only UV‐irradiated sites, photoinduced graft copolymerization of MPC using a photomask was performed to prepare a pMPC patterned p(MMA/DMAB) film. The film was stained using a rhodamine 6G dye that can absorb specifically to pMPC to confirm the pMPC pattern. The p(MMA/DMAB) film can be applied to various fields including photolithography and biomedical applications, because the film surface properties can be controlled using various vinyl monomers selectively on UV‐irradiated sites. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2822–2829     

Transmetalation reaction between hydrophobic silver nanoparticles and aqueous chloroaurate ions at the air-water interface

The transmetalation reaction between a sacrificial nanoparticle and more noble metal ions in solution has emerged as a novel method for creating unique hollow and bimetallic nanostructures. In this report, we investigate the possibility of carrying out the transmetalation reaction between hydrophobic silver nanoparticles assembled and constrained at the air-water interface and subphase gold ions. We observe that facile reduction of the subphase gold ions by the sacrificial silver nanoparticles occurs resulting in the formation of elongated gold nanostructures that appear to cross-link the sacrificial silver particles. This transmetalation reaction may be modulated by the insertion of an electrostatic barrier in the form of an ionizable lipid monolayer between the silver nanoparticles and the aqueous gold ions that impacts the gold nanoparticle assembly. Transmetalation reactions between nanoparticles constrained into a close-packed structure and appropriate metal ions could lead to a new strategy for metallic cross-linking of nanoparticles and generation of coatings with promising optoelectonic behavior.     

Packing of ions near an electrolyte-electrode interface in the HNC/LMSA approximation to the RPM model

The standard HNC/MSA calculation of the ion distribution fails to describe the packing in a second layer seen in MC calculations. We describe an improved treatment which employs the particle-particle direct correlation function for non-neutral electrolyte compositions as found near the surface.     

The surface energy of hydrophilic and hydrophobic adsorbents

Water vapor adsorption and heats of water wetting are studied for hydrophilic quartz, hydrophobic-hydrophilic talc, and hydrophobized Silochrom samples. Water contact angles on the materials under examination are found. The surface thermodynamic parameters of the sorbents are calculated from the data obtained. It is shown that boundary water layers on hydrophilic quartz surface are ordered to a higher extent, while those on hydrophobic basal surfaces of talc particles and hydrophobic surfaces of modified Silochrom samples are ordered to a lower extent relative to liquid water. An empirical equation relating the surface pressure of water films adsorbed on hydrophilic high-energy surfaces with the surface free energy of the latter is proposed. The values of surface free energy are estimated from this equation for a number of important hydrophilic adsorbents.     

Adsorption of trypsin on hydrophilic and hydrophobic surfaces

The adsorption of trypsin onto polystyrene and silica surfaces was investigated by reflectometry, spectroscopic methods, and atomic force microscopy (AFM). The affinity of trypsin for the hydrophobic polystyrene surface was higher than that for the hydrophilic silica surface, but steady-state adsorbed amounts were about the same at both surfaces. The conformational characteristics of trypsin immobilized on silica and polystyrene nanospheres were analyzed in situ by circular dichroism and fluorescence spectroscopy. Upon adsorption the trypsin molecules underwent structural changes at the secondary and tertiary level, although the nature of the structural alterations was different for silica and polystyrene surfaces. AFM imaging of trypsin adsorbed on silica showed clustering of enzyme molecules. Rinsing the silica surface resulted in 20% desorption of the originally adsorbed enzyme molecules. Adsorption of trypsin on the surface of polystyrene was almost irreversible with respect to dilution. After adsorption on silica the enzymatic activity of trypsin was 10 times lower, and adsorbed on polystyrene the activity was completely suppressed. The trypsin molecules that were desorbed from the sorbent surfaces by dilution with buffer regained full enzymatic activity.