Formation of Core‐Shell‐Corona Micellar Complexes through Adsorption of Double Hydrophilic Diblock Copolymers into Core‐Shell Micelles

Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.

Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

Supramolecular Micellization of Diblock Copolymer Mixtures Mediated by Hydrogen Bonding for the Observation of Separated Coil and Chain Aggregation in Common Solvents

This paper describes a new approach towards preparing self‐assembled hydrogen‐bonded complexes that have vesicle and patched spherical structures from two species of block copolymer in non‐selective solvents. The assembly of vesicles from the intermolecular complex formed after mixing polystyrene‐block‐poly(4‐vinyl phenol) (PS‐b‐PVPh) with poly(methyl methacrylate)‐block‐poly(4‐vinylpyridine) (PMMA‐b‐P4VP) in tetrahydrofuran (THF) is driven by strong hydrogen bonding between the complementary binding sites on the PVPh and P4VP blocks. In contrast, well‐defined patched spherical micelles form after blending PS‐b‐PVPh with PMMA‐b‐P4VP in N,N‐dimethylformamide (DMF): weaker hydrogen bonds form between the PVPh and P4VP blocks in DMF, relative to those in THF, which results in the formation of spherical micelles that have compartmentalized coronas that consist of PS and PMMA blocks.

     

Segregation of Coronal Chains in Micelles Formed by Supramolecular Interactions

Summary: Spherical micelles have been formed by mixing, in DMF, a poly(styrene)‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐block‐P2VP‐block‐PEO) triblock copolymer with either poly(acrylic acid) (PAA) or a tapered triblock copolymer consisting of a PAA central block and PEO macromonomer‐based outer blocks. Noncovalent interactions between PAA and P2VP result in the micellar core while the outer corona contains both PS and PEO chains. Segregation of the coronal chains is observed when the tapered copolymer is used.

Inclusion of comb‐like chains with short PEO teeth in the corona triggers the nanophase segregation of PS and PEO as illustrated here (PS = polystyrene; PEO = poly(ethylene oxide)).     

Core extractable nano‐objects: Manipulating triblock copolymer micelles

We report manipulation of polymer nano‐objects by changing solvents through chemically crosslinking the spherical micelles of poly(3‐(triethoxysilyl)propyl methacrylate)‐block‐polystyrene‐block‐poly(2‐vinylpyridine) (PTEPM‐b‐PS‐b‐P2VP). In methanol, which is a common solvent of PTEPM and P2VP but poor of PS, PTEPM‐b‐PS‐b‐P2VP forms micelles with a PS core. When changing the medium into acidic water, the PTEPM segments further collapse and gelate to form a crosslinked shell outside of the PS core. When the particles are re‐dispersed into tetrahydrofuran (THF), the PS segments are extracted out, producing uniform small cavity of few nanometers in each particle. Thus one sample can be used to generate well‐defined nano‐objects with different appearance by solvent manipulation. The particle structure development has been characterized by transmission electron microscope (TEM), DLS, and ¹H NMR. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Diblock copolymer–azobenzene complexes through hydrogen bonding: Self‐assembly and stable photoinduced optical anisotropy

We have demonstrated the preparation of a series of photoaddressable supramolecular block copolymers by mixing a carboxy‐terminated azobenzene derivative, 6‐[4‐(4′‐cyanophenylazo)phenyloxy]hexanoic acid (AZO), and two polystyrene‐b‐poly(4‐vinylpiridine) (PS‐b‐P4VP) block copolymers. AZO can be selectively attached to the P4VP block of PS‐b‐P4VP through hydrogen bonding interactions. The assembly of AZO with vinylpyridine group‐containing polymers was initially investigated on a model system composed of P4VP homopolymer and AZO. Homogeneous liquid crystalline materials were obtained for ratios of AZO to vinylpyridine repeating unit, x, lower or equal to 0.50. Mixtures with higher x resulted in heterogeneous materials showing clear macrophase separation. Accordingly, a series of hydrogen‐bonded complexes of PS‐b‐P4VP and AZO, PS‐b‐P4VP(AZO)_x, with x = 0.25 and x = 0.50 were prepared. Lamellar and spherical morphologies were observed for the complexes based on PS24‐b‐P4VP9.5 (M_n,PS = 24,000, M_n,P4VP = 9500) and PS24‐b‐P4VP1.9 (M_n,PS = 24,000, M_n,P4VP = 1900), respectively. Photoinduced orientation of the azobenzene units was obtained in films of P4VP(AZO)_x and PS‐b‐P4VP(AZO)_x with x = 0.25 and 0.50 by using 488 nm linearly polarized light and characterized through birefringence and dichroism measurements. This investigation shows a versatile and less laborious approach to azobenzene‐containing polymer materials with low chromophore content, of interest in optical application. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Shear‐Induced Orientation of Gyroid PS‐b‐P4VP(PDP) Supramolecules

The phase behavior of block copolymer based supramolecular complexes polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and amphiphilic pentadecylphenol (PDP) molecules resembles the phase behavior of conventional block copolymers. Several PS‐b‐P4VP(PDP) complexes are found to self‐assemble into gyroid nanostructures. Typically, the grains are randomly oriented with a maximal size of several micrometers. Here, the orientation of a gyroid PS‐b‐P4VP(PDP) complex upon shearing is reported. It is found that the (111) gyroid lattice direction orients parallel to the shear direction after only several seconds of large amplitude oscillatory shearing. Oriented gyroid complexes can be used as templates for the preparation of metal nanofoams with improved ordering with potentially superior properties.

     

Block Copolymer Micelles with Near Infrared Metal Phthalocyanine Dyes for Laser Induced Writing

A route has been developed to disperse metal‐containing phthalocyanine dyes in a non‐polar medium based on amphiphilic block copolymer micelles of poly[styrene‐block‐(4‐vinylpyridine)] (PS‐b‐P4VP) and poly[styrene‐block‐(acrylic acid)] (PS‐b‐PAA) copolymers. Polar P4VP and PAA efficiently encapsulate cobalt(II ), manganese(II ), and nickel(II ) phthalocyanine dyes by axial coordination of nitrogen and µ‐oxo bridged dimerization with the transition metals, respectively. Good dispersion of the dyes is confirmed by the linear enhancement of Q‐bands in UV–vis absorption spectra with dye concentration. A thin monolayered PS‐b‐P4VP micelle film that contained a nickel(II ) phthalocyanine dye which efficiently adsorbs a laser beam on a localized area to generate a local heat higher than the glass transition temperatures of both blocks. One‐dimensional laser writing on the dye‐containing film allows the fabrication of a few submicrometer wide line patterns in which the self‐assembled nanostructure of the block copolymer is modified by the directional heat arising from laser scanning.

     

Composite Worm‐Like Aggregates Formed from a Pair of Block‐Copolymers Containing Hydrogen‐Bonding Donor and Acceptor

Worm‐like aggregates with a PAA/P4VP complex core and a PEG/PNIPAM mixed shell were prepared in ethanol by the comicellization of poly(ethylene glycol)‐block‐poly(acrylic acid) (PEG‐b‐PAA) and poly(N‐isopropylacrylamide)‐block‐poly(4‐vinylpyridine) (PNIPAM‐b‐P4VP) through hydrogen‐bonding. The formed aggregates were studied by dynamic light scattering, static light scattering, ¹H NMR, and transmission electron microscopy. The length of worm‐like aggregates could be adjusted by changing the weight ratio of W(PNIPAM‐b‐P4VP)/W(PEG‐b‐PAA). When the ratio changed from 20 to 150%, the length changed from about 100 nm to several microns, and the diameter stayed almost unchanged at about 15 nm.

     

Carbohydrates as Additives for the Formation of Isoporous PS‐b‐P4VP Diblock Copolymer Membranes

Highly porous polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) diblock copolymer membranes are prepared using carbohydrates as additives. Therefore α‐cyclodextrine, α‐(D )‐glucose, and saccharose (cane sugar) are tested for the membrane formation of three different PS‐b‐P4VP polymers. The addition of the carbohydrates leads to an increasing viscosity of the membrane solutions due to hydrogen bonding between hydroxyl groups of the carbohydrates and pyridine units of the block copolymer. In all cases, the membranes made from solution with carbohydrates have higher porosity, an improved narrow pore distribution on the surface and a higher water flux as membranes made without carbohydrates with the same polymer, solvent ratio, and polymer concentration.     

Tunable morphologies of rhenium complex‐containing polystyrene‐block‐poly(2‐vinylpyridine) aggregates

Polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) diblock copolymer was functionalized with luminescent chlorotricarbonyl rhenium (I) phenanthroline complex in the presence of silver perchlorate. The copolymer‐metal complex showed high sensitivity to the solvent system. Different morphologies and dimensions of the rhenium complex within nanosized micelles were controlled by changing the solvent systems. Core‐embedded rhenium complex within micelles appear by adding methanol, a poor solvent for the copolymer‐metal complex, to the solution of common solvent tetrahydrofuran (THF); the number of the core‐embedded rhenium complex and the scale of the micelles are strongly related to the addition of methanol. Moreover, a novel morphology of corona‐embedded rhenium complex micelles was prepared by dropping the original THF solution of copolymer‐metal complex into water at a low pH value. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2047–2053, 2008     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006     

Preparation of polymeric vesicles through ultrasonic treatment of poly(styrene‐block‐2‐vinylpyridine) micelles under alkaline conditions

An approach for the preparation of block copolymer vesicles through ultrasonic treatment of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) micelles under alkaline conditions is reported. PS‐b‐P2VP block copolymers in toluene, a selective solvent for PS, form spherical micelles. If a small amount of NaOH solution is added to the micelles solution during ultrasonic treatment, organic‐inorganic Janus‐like particles composed of the PS‐b‐P2VP block copolymers and NaOH are generated. After removal of NaOH, block copolymer vesicles are obtained. A possible mechanism for the morphological transition from spherical micelles to vesicles or Janus‐like particles is discussed. If the block copolymer micelles contain inorganic precursors, such as FeCl₃, hybrid vesicles are formed, which may be useful as biological and chemical sensors or nanostructured templates. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 953–959     

Competitive hydrogen bonding and self‐assembly in poly(2‐vinyl pyridine)‐block‐poly(methyl methacrylate)/poly(hydroxyether of bisphenol A) blends

Blends of poly(2‐vinyl pyridine)‐block‐poly(methyl methacrylate) (P2VP‐b‐PMMA) and poly(hydroxyether of bisphenol A) (phenoxy) were prepared by solvent casting from chloroform solution. The specific interactions, phase behavior and nanostructure morphologies of these blends were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this block copolymer/homopolymer blend system, it is established that competitive hydrogen bonding exists as both blocks of the P2VP‐b‐PMMA are capable of forming intermolecular hydrogen bonds with phenoxy. It was observed that the interaction between phenoxy and P2VP is stronger than that between phenoxy and PMMA. This imbalance in the intermolecular interactions and the repulsions between the two blocks of the diblock copolymer lead to a variety of phase morphologies. At low phenoxy concentration, spherical micelles are observed. As the concentration increases, PMMA begins to interact with phenoxy, leading to the changes of morphology from spherical to wormlike micelles and finally forms a homogenous system. A model is proposed to describe the self‐assembled nanostructures of the P2VP‐b‐PMMA/phenoxy blends, and the competitive hydrogen bonding is responsible for the morphological changes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1894–1905, 2009     

Thermosensitive noncovalently bonded block copolymerlike micelles from interpolymer complexes

Interpolymer complexes between polystyrene‐b‐poly(2‐vinylpyridine), (PS‐P2VP), and poly(methacrylic acid) (PMAA), have been studied in dioxane. Dioxane is a good solvent for PS‐P2VP copolymers but it is a nonsolvent for PMAA at room temperature. In this way noncovalent bonded micelles are formed after mixing the solutions of the polymers at 60 °C and then allowing them to cool at room temperature. Static and dynamic light scattering as well as viscosity measurements have been used to study the dependence of aggregate mass and size as a function of the molar ratio of functional groups in PS‐P2VP/PMAA mixtures, as well as temperature. Plots of apparent average molecular weight and hydrodynamic radius of the aggregates versus amine to carboxyl group ratio show a maximum at a ratio close to one. The size of the aggregates decreases at higher ratios because of the formation of more stable micelles with smaller cores. In all cases rather compact structures were formed, as evidenced by viscometry. The mass of the aggregates was found to decrease by an increase in temperature while hydrodynamic radii were increased. This was attributed to the increase of the thermodynamic quality of the solvent toward PMAA as temperature increases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6230–6237, 2004     

Multiple Morphologies and Their Transformation of a Polystyrene‐block‐poly(4‐vinylpyridine) Block Copolymer

Summary: We report the multiple morphologies and their transformation of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) in low‐alkanol solvents. In order to improve the solubility of polystyrene block in alcohol solvents, the solution of block copolymer sample was treated at a higher temperature, and then the influence of rate of decreasing temperature on multiple morphologies (including spheres, rods, vesicles, porous vesicles, large compound vesicles, and large compound micelles) was observed. The transformation of spheres to rods, to tyre‐shaped large compound micelles, and to sphere‐shaped large compound micelles was also realized. The formation mechanisms of the multiple morphologies and their transformation are discussed briefly.

Aggregates of PS‐P4VP formed in butanol by quenching from 110 °C to room temperature.     

pH/Thermosensitive Hydrogels Formed at Low pH by a PMMA‐PAA‐P2VP‐PAA‐PMMA Pentablock Terpolymer

A poly(methyl methacrylate)‐block‐poly(acrylic acid)‐block‐poly(2‐vinyl pyridine)‐block‐poly(acrylic acid)‐block‐poly(methyl methacrylate) (PMMA‐PAA‐P2VP‐PAA‐PMMA), pentablock terpolymer has been synthesized by anionic polymerization with sequential addition of monomers and studied in aqueous media at low pH. The system exhibits combined properties and adopts the behavior of ‘telechelic’ polyelectrolytes and that of double hydrophilic polyampholytes. This complex behavior leads to the pentablock terpolymer forming a pH and temperature sensitive reversible hydrogel at very low polymer concentration.

     

Selective and Sequential Re‐Assembly of Patterned Block Copolymer Thin Film for Fabricating Polymeric,Inorganic, and Their Composite Nanostructured Arrays

We report that the nanostructures of poly(styrene‐block‐4‐vinylpyridine) block copolymer (PS‐b‐P4VP) thin film on a wafer substrate can be re‐assembled by sequential vapor treatment using selected solvents. Metal or other inorganic nanoparticles that were randomly pre‐loaded inside or on the surface of PS‐b‐P4VP thin film could be pulled to the rim of PS and P4VP along with the movements of PS and P4VP blocks during the treatment. As a result, the patterned polymeric or inorganic/polymer composite nanoisland and nanoring arrays were fabricated.

     

Aggregation Behavior of Homo‐PS/PS‐b‐P2VP Blends at the Air/Water Interface

The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.

     

Morphological change of a diblock copolymer film induced by selective doping of a photoactive chromophore

Tetrakis‐5,10,15,20‐(4‐carboxyphenyl)porphyrine (TCPP) was position‐selectively introduced into a diblock copolymer film of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) with a sea–island microphase structure. By immersing the PS‐b‐P4VP film into a solution of TCPP/methanol, TCPP was introduced into the island parts comprising P4VP phase. The morphology of the island parts depended on the immersion time and TCPP concentration. A schematic model for the morphological change caused by the phase‐selective introduction of TCPP was proposed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 368–375, 2007