Solvothermal Syntheses, Crystal Structures, and Properties of New [Mn( dien )2]2+ Complexes

 The two new compounds Mn(dien)₂[MoS₄] (1) and Mn(dien)₂[Mo₂O₂S₆] (2) (dien = diethylenetriamine) were prepared under solvothermal conditions. Both compounds were obtained as phase-pure products. The structures consist of new [Mn(dien)₂]²⁺ cations and isolated tetrahedral [MoS₄]²⁻ (1) or [Mo₂O₂S₆]²⁻ (2) anions. Between the anions and the cations, hydrogen bonding is observed. Compound 1 crystallizes in the tetragonal space group I (a = 10.219(2), c = 9.259(2) ?, Z = 2), whereas 2 crystallizes in the monoclinic space group P2₁/c (a = 8.703(2), b = 18.390(4), c = 14.603(3) ?, β = 103.18(3)°, Z = 4). The thermal behaviour of the thiomolybdates was investigated using difference thermoanalysis (DTA) and thermogravimetry (TG). Both compounds decompose under argon with a single endothermic signal in the DTA curve (peak maximum: 252 (1) and 242°C (2)).     

Solvothermal Synthesis, Crystal Structure, and Properties of the New Oxothiomolybdate Ni(dien)2[Mo2O2S6]

Summary.  The reaction of NiCl₂ · 6H₂O, Na₂MoO₄ ċ 2H₂O, and sulfur in a mixture of diethylenetriamine and 0.2 M ammonia solution (1:4) under solvothermal conditions leads to the formation of orange-red crystals of the oxothiomolybdate Ni(dien)₂[Mo₂O₂S₆] (dien = diethylenetriamine) in nearly 100% yield. The structure consists of [Ni(dien)₂]²⁺ cations and discrete dimeric [Mo₂O₂S₆]²⁻ anions. The compound crystallizes in the monoclinic space group P2₁/c (a = 8.726(2), b = 18.111(4), c = 14.419(3) ?, β = 101.686(3)°). Upon heating the compound decomposes in a single step starting at about 250°C. The final decomposition product was identified by X-ray powder diffractometry as MoS₂ and Ni₃S₂. Spectroscopic data as well as detailed synthetic procedures for Ni(dien)₂[Mo₂O₂S₆] are reported. Received November 6, 2000. Accepted November 17, 2000     

Preparation,Thermal Behaviour,and Crystal Structure of MgAl<Subscript>2</Subscript>F<Subscript>8</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>

Summary.  Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂. Received October 29, 2001. Accepted (revised) December 6, 2001     

Synthesis,Crystal Structure and Raman Spectrum of Hydrazinium(+2) Fluoroarsenate(III) Fluoride,N<Subscript>2</Subscript>H<Subscript>6</Subscript>AsF<Subscript>4</Subscript>F

Summary.  Hydrazinium(+2) fluoroarsenate(III) fluoride was prepared by the reaction of hydrazinium(+2) fluoride and liquid arsenic trifluoride. N₂H₆AsF₄F is stable at 273 K, but decomposes slowly at room temperature. N₂H₆AsF₄F crystallizes in the orthorhombic space group Pnn2 with a = 774.0(2) pm, b = 1629.2(4) pm and c = 436.6(1) pm; V = 0.5506(3) nm³, Z = 4 and d _c  = 2.461 g cm⁻³. The structure consists of N₂H₆ ²⁺ cations, AsF₄ ⁻ anions, and F⁻ anions and is interconnected by a hydrogen bonding network. Distorted trigonal-bipyramidal AsF₄ ⁻ units are very weakly interconnected and form chains along the b axis. Bands in the Raman spectrum are assigned to the vibrations of N₂H₆ ⁺² cations and AsF₄ ⁻ anions. Corresponding author. E-mail: adolf.jesih@ijs.si Received April 18, 2002; accepted July 15, 2002     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

Al,B, and F doped LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as cathode material of lithium-ion batteries

A series of the mixed transition metal compounds, Li[(Ni_1/3Co_1/3Mn_1/3)_1–x-y Al _x B _y ]O_2-z F _z (x = 0, 0.02, y = 0, 0.02, z = 0, 0.02), were synthesized via coprecipitation followed by a high-temperature heat-treatment. XRD patterns revealed that this material has a typical α-NaFeO₂ type layered structure with R3^- m space group. Rietveld refinement explained that cation mixing within the Li(Ni_1/3Co_1/3Mn_1/3)O₂ could be absolutely diminished by Al-doping. Al, B and F doped compounds showed both improved physical and electrochemical properties, high tap-density, and delivered a reversible capacity of 190 mAh/g with excellent capacity retention even when the electrodes were cycled between 3.0 and 4.7 V.     

A New Molybdophosphate Constructed From {Mo<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack>O<Subscript>4</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>}<Superscript>2+</Superscript> and 1-Hydroxyethylidenediphosphonate

A new molybdophosphate (NH₄)₈{Mo₂^VO₄[(Mo₂^VIO₆)CH₃C(O)(PO₃)₂]₂}·14H₂O (1), has been synthesized by the reaction of {Mo₂^VO₄(H₂O)₆}²⁺ fragments with 1-hydroxyethylidenediphosphonate (hedp HOC(CH₃)(PO₃H₂)₂), and it is characterized by ³¹P NMR, IR, UV, element analysis, TG and single-crystal X-ray analysis. The structure analysis reveals that the polyoxoanion can be described as two {(Mo₂^VIO₆)(CH₃C(O)(PO₃)₂} units connected by a {Mo₂^VO₄}²⁺ moiety. In the structure, the six Mo atoms are arranged into a new “W-shaped” structure, which represents a new kind of molybdophosphate.     

Reaction of Sulfur and Oxygen-Bridged 8-Quinolinolato Trinuclear Molybdenum Cluster [Mo<Subscript>3</Subscript>OS<Subscript>3</Subscript>(qn)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> with Acetylene Carboxylic Acids

The reaction of a sulfur and oxygen-bridged 8-quinolinolato trinuclear molybdenum cluster [Mo₃OS₃(qn)₃(H₂O)₃]⁺ (3; Hqn = 8-quinolinol) with equimolar amounts of acetylene carboxylic acid, 4-pentynoic acid, 5-hexynoic acid, acetic acid, and pimelic acid gave clusters having μ-carboxylato groups, [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡CCOO)] (6), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₂COO)] (7), [Mo₃OS₃(qn)₃(H₂O)(μ-HC≡C(CH₂)₃COO)] (8), [Mo₃OS₃(qn)₃(H₂O)(μ-CH₃COO)] (4), and [{Mo₃OS₃(qn)₃(C₂H₅OH)}₂(μ-C₇H₁₀O₄)] (5), respectively. X-ray structural analyses, ¹H NMR, and electronic spectra of these clusters made clear that each of the COO⁻ groups of the reagents bridges two Mo atoms in each cluster and that no adduct formation occurred at the sulfurs in the clusters. The reaction of 3 with a large excess-molar amount (50 times) of acetylene carboxylic acid gave [Mo₃OS(μ₃-SCH=C(COOH)S)(qn)₃(H₂O)(μ-HC≡CCOO)] (9) with two molecules of acetylene carboxylic acid, one acting as a carboxylato bridge and the other in adduct formation, as supported by the electronic and ¹H NMR spectra. The corresponding aqua cluster [Mo₃OS₃(H₂O)₉]⁴⁺ (1), on the contrary, reacts with acetylene carboxylic acid to give adduct [Mo₃OS(μ₃-SCH=C(COOH)S)(H₂O)₉]⁴⁺ (2). Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

New Selenidogermanates with Transition-Metal Complexes as Counterions: Solvothermal Synthesis, Crystal Structures, and Properties of [Mn(en)3]2Ge2Se6 and [Fe(dien)2]2Ge2Se6

Summary. New selenidogermanates [Mn(en)₃]₂Ge₂Se₆ (en = ethylenediamine) and [Fe(dien)₂]₂Ge₂Se₆ (dien= diethylenetriamine) were synthesized by the reaction of germanium dioxide, elemental selenium, and transition metal chlorides in respectively en and dien. Both compounds crystallize in the monoclinic space group P2₁/n with two formula units in the unit cell, and consist of discrete [Ge₂Se₆]⁴⁻ anions with transition metal complex cations as counter ions. The [Ge₂Se₆]⁴⁻ anion is formed by two GeSe₄ tetrahedra sharing a common edge to form a planar Ge₂Se₂ four-membered ring. The [Mn(en)₃]²⁺ and [Ni(dien)₂]²⁺ complex cations are in distorted octahedral geometry. In both selenidogermanates extensive N–H···Se hydrogen bonding contacts lead to 3-dimensional network structures. The band gaps of 2.36 and 2.25 eV were derived from optical absorption spectra. Thermogravimetric analysis shows that the first compound decomposes in two steps under the nitrogen stream, while the second exhibits a one-step decomposition process.     

Cuboidal oxalate cluster complexes with the Mo<Subscript>3</Subscript>CuQ<Subscript>4</Subscript><Superscript>5+</Superscript> cluster core (Q = S or Se): synthesis,structure, and electrochemical properties

The reactions of the [Mo₃(μ₃-Q)(μ₂-Q)₃(H₂O)₃(C₂O₄)₃]²⁻ complex (Q = S or Se) with CuX salts (X = Cl, Br, I, or SCN) in water produce the cuboidal heterometallic clusters [Mo₃(CuX)(μ₃-Q)₄(H₂O)₃(C₂O₄)₃]²⁻, which were isolated as the potassium and tetraphenylphosphonium salts. Two new compounds, K₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·6H₂O and (PPh₄)₂[Mo₃(CuBr)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O, were structurally characterized. All compounds were characterized by elemental analysis and IR spectroscopy. The K₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] compound was characterized by the ⁷⁷Se NMR spectrum; the (PPh₄)₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃], (PPh₄)₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] and K₂[Mo₃(CuSCN)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O compounds, by electrospray mass spectra. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1639–1644, September, 2007.     

Interpretation of the difference of optimal Mo density in MoS<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and MoS<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> HDS catalysts

The first part of this paper deals with the morphology of the MoS₂ phase and its oxide precursor, the MoO₃ phase, mainly from a geometrical point of view. After giving a brief review of the literature describing the structure of these compounds, Mo densities in both phases were calculated along various crystallographic planes. Further, using structural models recently proposed by others, Mo densities in MoS₂ were also calculated in the case of an epitactic growth on γ-Al₂O₃ and TiO₂ model surfaces. Then, the calculated Mo densities were compared with experimental results (Mo density when HDS activity is maximal) previously obtained for catalysts constituted of MoS₂ supported on a low SSA TiO₂, a high SSA TiO₂ and a conventional γ-alumina. It was suggested that either on alumina or titania the MoS₂ phase is growing as (100) MoS₂ planes. However, while on the alumina the optimal MoS₂ phase might be constituted of dispersed MoS₂ slabs covering only a part of the alumina surface (2.9–3.9 Mo atoms/nm²), on titania the optimal MoS₂ phase might be constituted of a uniform MoS₂ monolayer (5.2 atoms/nm² for the high SSA titania, which is equal to the Mo density of a perfect MoS₂ (100) plane). This difference may originate in the creation of a 'TiMoS' phase enhancing the S atoms mobility over Mo/TiO₂-sulfided catalysts. Indeed, while in the case of a γ-alumina carrier the active sites (labile S atoms) are located on the edge of MoS₂ slabs making the ratio Mo_edge/Mo_total a crucial parameter for the catalytic performances, in the case of a titania carrier the labile sulfur atoms might be statistically distributed all over the TiMoS active phase. Further, the higher Mo density observed over the high SSA titania (5.2 atoms/nm²) when compared to that over the low SSA titania (4.2 atoms/nm²) was supposedly due to the pH-swing method advantageously used to prepare the former carrier. Indeed, this method allows giving a solid with enhanced mechanical properties providing a good stability to the derived catalysts under experimental conditions. In addition, this TiO₂ carrier exhibits a great homogeneity, with a surface structure substantially uniform, which might be adequate for a long-range growth of (100) MoS₂ slabs.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Two Novel Er-Cr Ion-Pair Complexeswith Hydrogen Bonding Network: Syntheses, Crystal Structures, and Magnetic Properties

Summary.  Two novel Er-Cr ion-pair complexes ([Er(DMA)₃(H₂O)₄][Cr(CN)₆] and [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O; DMA = dimethylacetamide, MPL = 1-methyl-2-pyrrolidinone) have been synthesized. [Er(DMA)₃(H₂O)₄][Cr(CN)₆] crystallizes in the monoclinic system (space group P _c ) with a = 9.789(2), b = 11.263(2), c = 13.997(3)?, β = 105.66(3)°, V = 1485.9(5)?³, Z = 2; [Er(MPL)₄(H₂O)₃][Cr(CN)₆]·2H₂O crystallizes in the monoclinic system (space group P2₁) with a = 9.447(2), b = 13.881(3), c = 14.673(3)?, β = 101.85(3), V = 1883.1(7)?³, Z = 2. X-Ray crystal diffraction analyses reveal that the two complexes form a hydrogen bonding network structure through the CN group and H₂O molecules. Variable temperature susceptibilities for the two complexes indicate that weak antiferromagnetic interactions exist between cation and anion pairs through this hydrogen bonding network.     

Synthesis,structure, and electrochemistry of <Emphasis Type="Italic">trans</Emphasis>-[Co<Superscript>III</Superscript>{(BA)<Subscript>2</Subscript>pn}(L)<Subscript>2</Subscript>]ClO<Subscript>4</Subscript> complexes

The structure, spectroscopic, and electrochemical properties of [Co{(BA)₂pn}(L)₂]ClO₄ complexes, where (BA)₂pn = N,N′-bis(benzoylacetone)-1,3-propylenediimine dianion and the two ancillary ligands (L) are pyridine, py (1), and 4-methylpyridine, 4-Mepy (2), have been investigated. These complexes have been characterized by elemental analyses, IR, UV–Vis and ¹H-NMR spectroscopy. The crystal structure of [Co{(BA)₂pn}(py)₂]ClO₄ (1) has been determined by X-ray diffraction. The coordination geometry around cobalt(III) is best described as a distorted octahedron. The electrochemical reduction of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Co^III–Co^II is electrochemically irreversible, which is accompanied by the dissociation of the axial N(py)–cobalt bonds. This process becomes quasi-reversible upon the addition of excess py ligands. The second reduction step of Co^II/I shows reversible behavior and is not influenced by the nature of the axial ligands. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Rate and Equilibrium Data for Substitution Reactions of [Pd(<Emphasis Type="Italic">dien</Emphasis>)Cl]<Superscript>+</Superscript> with <Emphasis Type="Italic">L</Emphasis>-Cysteine and Glutathione in Aqueous Solution

Summary. The kinetics of the complex formation reactions between monofunctional palladium(II) complex, [Pd(dien)Cl]⁺, where dien is diethylene triamine or 1,5-diamino-3-azapentane, with L-cysteine and glutathione were studied in an aqueous 0.10M perchloric acid medium by using variable stopped-flow spectrophotometry. Second-order rate constants, <$>{k_2}^{298}<$>, were (3.89±0.02) 10²M^–1s^–1 for L-cysteine and (1.44±0.01) 10³M^–1s^–1 for glutathione. The negative entropies of activation support a strong contribution from bond formation in the transition state of the process. The hydrolysis of Pd^II complex gave the monohydroxo species, [Pd(dien)(OH)]⁺ and the dimer with a single hydroxo-bridge species, [Pd₂(dien)₂OH]³⁺. L-Cysteine and glutathione ligands form complexes of 1:1 stoichiometry and a dimer with a single ligand bridge. The formation constants of the complexes were determined, and their concentration distribution as a function of pH was evaluated.     

EPR investigation and thermal study of yA<Subscript>2</Subscript>O-(1-<Emphasis Type="Italic">y</Emphasis>)[0.25(WO<Subscript>3</Subscript>)<Subscript>2</Subscript>-0.75(P<Subscript>2</Subscript>O<Subscript>5</Subscript>)] (A=Li,Na) glasses

Summary Glasses belonging to the series yA₂O-(1-y)[0.25(WO₃)_2-0.75P₂O₅] (y=0.10-0.60) are elaborated. DTA experiments reveal that the glass-network of the glasses are broken with increasing of modifier content. EPR spectra show the presence of two signals due to W⁵⁺ and Mo⁵⁺, as impuritie. The intensity of these EPR centres decreases when the concentration of A₂O increases. The variation of T_g upon the modifier content is ascribed to structural changes occurring in the matrix of these glasses.     

Replacement of Fe atoms by Ru in a carbidocarbonyl cluster [Fe<Subscript>6</Subscript>C(CO)<Subscript>16</Subscript>]<Superscript>2−</Superscript>. Structures of reaction products

The reaction of the carbidocarbonyl cluster [Fe₆C(CO)₁₆]²⁻ with ruthenium(IV) hydroxochloride Ru(OH)Cl₃ was studied. At 90–100 °C, the reaction gave products of replacement of Fe atoms by Ru in the [Fe₆C(CO)₁₆]²⁻ cluster along with degradation products. Treatment of the replacement products with FeCl₃ afforded the [Fe_2.96Ru_3.04C(CO)₁₇] compound (1), which was characterized by X-ray diffraction analysis. The crystals of cluster 1 are composed of two types of octahedral molecules (1a and 1b) in a ratio of 2 : 1. Molecules 1a are in general positions, and molecules 1b are located on twofold axes. In both molecules, the Fe and Ru atoms are disordered over four of six positions. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1761–1766, August, 2005.     

Preparation, Structure, and Thermal Decomposition of Co(II) Complexeswith 2,3- and 2,5-Dichlorobenzoic Acid and Imidazole

Summary.  The reaction products of Co(II)-2,3- and -2,5-dichlorobenzoate with imidazole (1, 2; CoL ₂⋯2imdċ2H₂O, L=C₇H₃Cl₂O, imd=imidazole) were characterized by their spectroscopic and thermochemical properties. The compounds crystallize in the monoclonic system with space group = P2₁/c, a=13.848(3), b=12.841(3) ?, c= 7.064(2) ?, β=98.12 °, V=1243.5(4) ?³, Z=2 for 1 and space group =P2₁/n, a=13.293(3), b= 6.964(2), c=13.800(3) ?, β=108.92(3) °, V=1208.6(4) ?³, Z=2 for 2. The complexes lose their crystal water in one step at 333 K and subsequently decompose to CoO with intermediate formation of Co₃O₄. Received August 9, 1999. Accepted (revised) February 11, 2000     

Thermal analysis of copper(Ii) complexes of general formula [Et<Subscript>4</Subscript>N]<Subscript>2</Subscript>[CuBr<Subscript>n</Subscript>Cl<Subscript>4-n</Subscript>]

Thermal decomposition of compounds consisting of tetrahalogenocuprate(II), [CuBr_nCl_4−n]²⁻ (n=0–4) anions and a tetraethylammonium cation has been studied using TG-FTIR, TG-MS, DTA and DTG techniques. The measurements were carried out in an argon and air atmospheres over the temperature range 293-1073 K. The products of the thermal decomposition were identified by IR and Far Infrared (FIR) spectroscopy as well as X-ray powder diffractometry.