Kinetic Analysis and Modeling of Thermal Decomposition of Ammonia Borane

Ammonia borane (AB; NH₃BH₃) is one of the most promising materials for hydrogen storage applications, mainly due to its high gravimetric hydrogen storage capacity of 19.6 wt%. In this paper, we present an exclusive kinetic analysis of AB thermolysis. Three methods are used for kinetic analysis of the thermal decomposition of AB, namely the Kissinger method, isoconversional model‐free fitting method, and solid‐state kinetics model–based method. Finally, a need to device a new model for thermal kinetics of AB was observed and hence a new kinetic model for AB thermolysis is proposed.     

Characterization and thermal analysis of agave bagasse and malt spent grain

A comprehensive study on agave bagasse (AB) and malt spent grains (MSG) was performed using thermal analysis (TG-DTA) to characterize their thermal behavior. The study also focused on to identify their constituents by the application of elemental, proximate, and chemical analyses. The calorific values were also tested. The Fourier transform infrared spectroscopy (FTIR) was used to determine the main constituents. SEM images showed that their morphology and X-ray diffraction patterns of these residues showed their characteristic structures. Thermal degradation of AB and MSG presented two mass loss steps: the first step can be attributed to the release of moisture, and the second one is related to the release of organic volatile compounds. Based on the chemical analyses, the determined quantity of volatile materials, ash, and fixed carbon for AB were 78.1, 7.4, and 14.5 %, respectively; whereas for MSG were 79.9, 6.3, and 13.8 %, respectively. Additionally, MSG had hemicelluloses in a higher extend compared to AB, but the former had a greater content of cellulose than MSG. The calorific value for AB and MSG achieved 16.35 and 19.06 kJ g^?1, respectively. The FTIR analysis showed characteristic bands of alkenes, esters, aromatics, ketones, and alcohols. EDS analyses for AB showed Ca, Cu, and Zn while for MSG metals such as Ca, Si, Cu, and Zn were found. X-ray diffraction patterns of these residues showed mostly cellulose, a common structure present in plants. This research helps to know the properties of these materials and to evaluate them as an energy source.     

Solid-state NMR study of Li-assisted dehydrogenation of ammonia borane

The mechanism of thermochemical dehydrogenation of the 1:3 mixture of Li(3)AlH(6) and NH(3)BH(3) (AB) has been studied by the extensive use of solid-state NMR spectroscopy and theoretical calculations. The activation energy for the dehydrogenation is estimated to be 110 kJ mol(-1), which is lower than for pristine AB (184 kJ mol(-1)). The major hydrogen release from the mixture occurs at 60 and 72 °C, which compares favorably with pristine AB and related hydrogen storage materials, such as lithium amidoborane (LiNH(2)BH(3), LiAB). The NMR studies suggest that Li(3)AlH(6) improves the dehydrogenation kinetics of AB by forming an intermediate compound (LiAB)(x)(AB)(1-x). A part of AB in the mixture transforms into LiAB to form this intermediate, which accelerates the subsequent formation of branched polyaminoborane species and further release of hydrogen. The detailed reaction mechanism, in particular the role of lithium, revealed in the present study highlights new opportunities for using ammonia borane and its derivatives as hydrogen storage materials.     

Efficient degradation of sulfamethoxazole by acetylene black activated peroxydisulfate

Acetylene black (AB), as a kind of carbon material with large specific surface area, low density, strong electron transferability, is supposed to have great potential for application in advanced oxidation processes (AOPs). In this study, AB was utilized as a peroxydisulfate (PDS) activator for the catalytic degradation of sulfamethoxazole (SMX) in aqueous media. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) techniques, zeta potential and Raman spectra were employed to characterize the features of AB. To verify the excellent performance of AB/PDS systems, a series of control experiments were carried out. Compared to graphite/PDS and biochar/PDS system, AB/PDS system could complete degradation of SMX within 15 min. Besides, the effects of key factors including AB dosage, PDS dosage, initial pH and SMX concentration on SMX degradation in AB/PDS system were elucidated systematically. Furthermore, through the radical quenching experiments, it was proved that singlet oxygen (¹O₂) was dominantly responsible for the degradation of SMX. Finally, based on the experiment results and comprehensive analysis, a probable reaction mechanism of AB/PDS system for SMX degradation was proposed. This work suggests that AB has a good potential for tackling the hazardous pollutants in environmental remediation.     

Solid-state thermolysis of ammonia borane and related materials for high-capacity hydrogen storage

Ammonia borane (NH(3)BH(3), AB) is a unique molecular crystal containing an intriguingly high density of hydrogen. In the past several years, AB has received extensive attention as a promising hydrogen storage medium. Several strategies have been successfully developed for promoting H(2) release and for suppressing the evolution of volatile by-products from the solid-state thermolysis of AB. Several potentially cost-effective and energy-efficient routes for regenerating AB from the spent fuels have been experimentally demonstrated. These remarkable technological advances offer a promising prospect of using AB-based materials as viable H(2) carriers for on-board application. In this perspective, the recent progresses in promoting H(2) release from the solid-state thermolysis of AB and in developing regeneration technologies are briefly reviewed.     

Theory of chromatographic separation of linear and star-shaped binary block-copolymers

Equations for the distribution coefficient of heteroarm stars are derived by using a model of an ideal chain in a slit-like pore; these equations together with those previously reported for linear block-copolymers are applied to describe chromatography of such copolymers. According to the theory, the retention generally depends on molar mass, composition, and architecture (microstructure and topology) of copolymers, on pore size and on adsorption interaction of chain units A and B. Three special modes of chromatography are studied in detail. (i) If interactions for A and B are close to the critical point of adsorption (CPA), the retention practically does not depend on architecture, and high molar mass copolymers can be separated by composition. (ii) At SEC condition for B and strong adsorption for A, copolymers in principle can be separated by architecture; better separation is expected in wide pores. Retention of linear block-copolymers decreases with increasing of the number of blocks; for heteroarm stars the theory predicts retention decreasing as: AB > StarAAB > StarABB; StarAAAB > StarABBB > StarAABB; StarAAAAB > StarABBBB > StarAAABB > StarAABBB. (iii) At the CPA for B copolymers AB, BAB and heteroarm stars regardless molar mass of B, M(B), can be separated by M(A). The same is true for ABA and ABAB...A in narrow pores. While the retention of AB, BAB, Star AB...B and StarAAB...B is the same, copolymers AB, ABA and linear multiblock-copolymers can be separated, as well as symmetric and very asymmetric triblock-copolymers ABA.     

Solid‐State Electrolyte Anchored with a Carboxylated Azo Compound for All‐Solid‐State Lithium Batteries

Organic electrode materials are promising for green and sustainable lithium‐ion batteries. However, the high solubility of organic materials in the liquid electrolyte results in the shuttle reaction and fast capacity decay. Herein, azo compounds are firstly applied in all‐solid‐state lithium batteries (ASSLB) to suppress the dissolution challenge. Due to the high compatibility of azobenzene (AB) based compounds to Li₃PS₄ (LPS) solid electrolyte, the LPS solid electrolyte is used to prevent the dissolution and shuttle reaction of AB. To maintain the low interface resistance during the large volume change upon cycling, a carboxylate group is added into AB to provide 4‐(phenylazo) benzoic acid lithium salt (PBALS), which could bond with LPS solid electrolyte via the ionic bonding between oxygen in PBALS and lithium ion in LPS. The ionic bonding between the active material and solid electrolyte stabilizes the contact interface and enables the stable cycle life of PBALS in ASSLB.     

Ferroelectric and antiferroelectric low molar mass organosiloxane liquid crystals

The present paper is a study of the ferroelectric and antiferroelectric behaviour in low molar mass organosiloxane liquid crystal materials classed as mono-mesogens (AB type) and bi-mesogens (ABA type). A systematic study of series of materials all based on the same chiral mesogenic moiety is presented. The mesogen is a biphenylyl benzoate with a halogen X attached laterally to the benzoate ring which is closest to the chiral centre. Three homologous series, where the halogen is either fluorine, chlorine or bromine, are investigated. The number of silicon atoms in the linkage or end group is varied between two and nine. It is found that the materials have a broad (40 C) ferroelectric or antiferroelectric phase with a high P s (90nC cm2). The siloxane moiety forces the tilt angle to a temperature independent value close to 45. The antiferroelectric order is observed only in bi-mesogens with an odd number of silicon atoms in the siloxane link. The antiferroelectric order is attributed to the conformation of the molecule rather than to antiferroelectric interactions between layers.     

Spectroscopic studies of dehydrogenation of ammonia borane in carbon cryogel

Ammonia borane (AB) is of great interest for storing hydrogen, an important issue in the growing field of hydrogen technology. The reaction pathways leading to the thermal decomposition of solid-state AB incorporated in carbon cryogels (CC) have been studied by spectroscopic methods. The time-dependent thermal decomposition was followed by in situ 11B nuclear magnetic resonance (NMR) and showed a significant increase in hydrogen release kinetics for AB in CC compared to neat AB. Both 11B NMR and Fourier transform infrared spectroscopy show a new reaction product, formed in the thermal decomposition of AB in CC scaffold (CC-AB) that is assigned to reactions with surface oxygen groups. The results indicate that incorporation of AB in CC enhances kinetics because of the reactions with residual surface-bound oxygen functional groups. The formation of new products with surface -O-B bonds is consistent with the greater reaction exothermicity observed when hydrogen is released from CC-AB materials. Scanning electron microscopy shows different morphology of AB in CC-AB nanocomposite as compared to neat AB.     

Detonation Properties of High Explosives Containing Ammonia Borane

Ammonia borane (AB) is used as a combustion agent to improve the properties of high explosives. The detonation velocity (D_v) and detonation pressure (P) of raw high explosives and of samples containing AB were calculated and compared. The detonation properties, impact sensitivities, thermal sensitivities, and thermal decomposition characteristics of high explosives containing AB were also measured. The results indicated that when the AB content was 20 wt‐%, the optimal detonation velocity and detonation pressure were achieved. Both the detonation velocity and detonation pressure of the high explosives containing AB were clearly increased compared with those of the raw high explosives. Moreover, the detonation velocities of high explosives containing AB were 7078 to 7423 m · s^–1 and their density ranged from 1.570 to 1.589 g · cm^–3. The detonation pressure ranged from 34.5 to 37 GPa and the average heat of detonation was 6688 J · g^–1. Furthermore, the impact and thermal sensitivities were 170 cm and 613 K, respectively, whereas a slight change occurred in the thermal decomposition characteristics. These results suggest that AB can serve as a powerful combustible agent in energetic materials and improve the detonation properties and sensitivities of high explosives.     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

氨基络合物制备氨硼烷及放氢性能研究

以NaBH₄为硼源、氨基络合物Ni(NH₃)₆Cl₂为氨源制备高储氢容量的氨硼烷(NH₃BH₃, Ammonia Borane, AB)及其放氢性能研究. 通过XRD, FTIR, ¹¹B NMR, ICP等手段分析表征了所制备产物的组成和纯度, 在此基础上探究了原料比例、反应温度、时间和溶剂等因素对产物的影响. 同时, 对不同原料比制得氨硼烷的热解放氢性能进行了研究. 实验结果表明: 当物质的量NaBH₄∶Ni(NH₃)₆Cl₂＝2∶1经过10 h的反应, 得到了纯度非常高的氨硼烷(纯度＞99%)|以NaBH₄∶Ni(NH₃)₆Cl₂＝3∶1得到的氨硼烷, 当以2 ℃/min进行升温时, 氢气释放主要集中在第一步, 并且没有硼烷和硼嗪等杂质气体的产生. 另外, 在产物中得到了金属Ni纳米颗粒, 经洗涤干燥后其粒径大小可控制在10 nm左右, 在催化氨硼烷等材料的水解放氢方面具有潜在的应用价值.     

In situ solid state 11B MAS-NMR studies of the thermal decomposition of ammonia borane: mechanistic studies of the hydrogen release pathways from a solid state hydrogen storage material

The mechanism of hydrogen release from solid state ammonia borane (AB) has been investigated via in situ solid state (11)B and (11)B{(1)H} MAS-NMR techniques in external fields of 7.1 T and 18.8 T at a decomposition temperature of 88 degrees C, well below the reported melting point. The decomposition of AB is well described by an induction, nucleation and growth mechanistic pathway. During the induction period, little hydrogen is released from AB; however, a new species identified as a mobile phase of AB is observed in the (11)B NMR spectra. Subsequent to induction, at reaction times when hydrogen is initially being released, three additional species are observed: the diammoniate of diborane (DADB), [(NH(3))(2)BH(2)](+)[BH(4)](-), and two BH(2)N(2) species believed to be the linear (NH(3)BH(2)NH(2)BH(3)) and cyclic dimer (NH(2)BH(2))(2) of aminoborane. At longer reaction times the sharper features are replaced by broad, structureless peaks of a complex polymeric aminoborane (PAB) containing both BH(2)N(2) and BHN(3) species. The following mechanistic model for the induction, nucleation and growth for AB decomposition leading to formation of hydrogen is proposed: (i) an induction period that yields a mobile phase of AB caused by disruption of the dihydrogen bonds; (ii) nucleation that yields reactive DADB from the mobile AB; and (iii) growth that includes a bimolecular reaction between DADB and AB to release the stored hydrogen.     

Structural characterization of self-assembled multifunctional binary nanoparticle superlattices

Nanocrystals of different size and functionality (e.g., noble metals, semiconductors, oxides, magnetic alloys) can be induced to self-assemble into ordered binary superlattices (also known as opals or colloidal crystals), retaining the size tunable properties of their constituents. We have built a variety of binary superlattices from monodisperse PbS, PbSe, CoPt3, Fe2O3, Au, Ag, and Pd nanocrystals, mixing and matching these nanoscale building blocks to yield multifunctional nanocomposites (metamaterials). Superlattices with AB, AB2, AB3, AB4, AB5, AB6, and AB13 stoichiometry with cubic, hexagonal, tetragonal, and orthorhombic symmetries have been identified. Assemblies with the same stoichiometry can be produced in several polymorphous forms by tailoring the particle size and deposition conditions. We have identified arrays isostructural with NaCl, CuAu, AlB2, MgZn2, MgNi2, Cu3Au, Fe4C, CaCu5, CaB6, NaZn13, and cub-AB13 compounds emphasizing the parallels between nanoparticle assembly and atomic scale crystal growth and providing confidence that many more structures will follow. Recently, we have demonstrated that electrical charges on sterically stabilized nanoparticles in addition to such parameters as particle size ratio and their concentrations can provide the formation of a much broader pallet of binary nanoparticle superlattices as compared with the limited number of possible superlattices formed by hard noninteracting spheres. In this contribution, we demonstrate a large variety of different binary superlattices, provide their detailed structural characterization, and discuss the role of energetic and kinetic factors in the cocrystallization process. We found that Coulomb, van der Waals, charge-dipole, dipole-dipole, and other interactions can contribute equally to cocrystallization, allowing superlattice formation to be dependent on a number of tunable parameters. We present binary superlattices as a new class of materials with a potentially unlimited library of constituents over a wide range of tunable structures.     

Effect of the chemical species of arsenic on sensitivity in graphite furnace atomic absorption spectrometry.

The sensitivity of graphite furnace atomic absorption spectrometry (GFAAS) to arsenobetaine (AB) was 1.3-times higher than to inorganic As. In order to understand the mechanism underlying this observation, the atomization processes for both chemical species were investigated in terms of the enthalpy change (DeltaH) during the atomization process in GFAAS. The enthalpy change of AB was slightly lower than that of inorganic As, which suggested that AB was atomized more efficiently than was inorganic As. Moreover, it was observed that some co-existing organic materials enhanced the analytical sensitivity of inorganic As. The sensitivity difference between inorganic As and AB depended upon the mechanisms of their atomization processes.     

Self-assembly of rod-coil-rod ABA-type triblock copolymers

Self-assembled behavior of symmetric ABA rod-coil-rod triblock copolymer melts is studied by applying self-consistent-field lattice techniques in three-dimensional space. The phase diagram is constructed to understand the effects of the chain architecture on the self-assembled behavior. Four stable structures are observed for the ABA rod-coil-rod triblock, i.e., spherelike, lamellar, gyroidlike, and cylindrical structures. Different from AB rod-coil diblock and BAB coil-rod-coil triblock copolymers, the lamellar structure observed in ABA rod-coil-rod triblock copolymer melts is not stable for high volume fraction of the rod component (f(rod)=0.8), which is attributed to the intramolecular interactions between the two rod blocks of the polymer chain. When 0.3相似文献   

Steric Effects Govern the Photoactivation of Phytochromes

Phytochromes constitute a superfamily of photoreceptor proteins existing in two forms that absorb red (Pr) and far‐red (Pfr) light. Although it is well‐known that the conversion of Pr into Pfr (the biologically active form) is triggered by a Z→E photoisomerization of the linear tetrapyrrole chromophore, direct evidence is scarce as to why this reaction always occurs at the methine bridge between pyrrole rings C and D. Here, we present hybrid quantum mechanics/molecular mechanics calculations based on a high‐resolution Pr crystal structure of Deinococcus radiodurans bacteriophytochrome to investigate the competition between all possible photoisomerizations at the three different (AB, BC and CD) methine bridges. The results demonstrate that steric interactions with the protein are a key discriminator between the different reaction channels. In particular, it is found that such interactions render photoisomerizations at the AB and BC bridges much less probable than photoisomerization at the CD bridge.     

Synthesis and analysis of thermal characteristics of polybenzoxazine based on phenol and 3‐Amino phenyl boronic acid

In this work, 3‐amino phenyl boronic acid (AB) was used as an aniline derivative in the preparation of polybenzoxazine based on phenol. In order to investigate the effect of boronic acid on thermal characteristics, polybenzoxazines based on pure aniline and 50% aniline and AB mixture were also prepared and analyzed. Significant improvements in thermal characteristics, increase in thermal stability and char yield, was recorded for the polymers based on AB or its mixture. This behavior was associated with crosslinked structures generated by condensation reactions of B? OH groups. Morphologic and thermal characteristics of polybenzoxazines samples were investigated by NMR, FTIR, DSC, TGA, and direct pyrolysis mass spectrometry (DP‐MS) techniques. Application of DP‐MS technique also supplied additional information on crosslinked structures produced by boronic acid units. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1711–1716     

MH/Ni电池充放电过程导电物理机制的研究

借助X射线衍射等方法, 研究了MH/Ni电池在充放电过程中电极活性材料β-Ni(OH)2和AB5合金的结构和微结构变化, 进而讨论了两种电极活性材料在充放电过程中的物理行为和导电的物理机制. 研究发现, 在充电过程中确实未观测到β-Ni(OH)2→β-NiOOH的相变, 只有在满充和过充时, 才发生部分β-Ni(OH)2转变成γ-NiOOH, 且一直是β-Ni(OH)2和γ-NiOOH两相共存; 在充电过程不是由β-Ni(OH)2→β-NiOOH相变来提供氢离子, 而是由氢原子离开β-Ni(OH)2的点阵位置提供氢离子; 在负极这一边, 开始时氢原子是以间隙式嵌入AB5点阵形成固溶体, 只有当AB5因氢原子的嵌入使其体积变化达一定百分数后才析出AB5Hx氢化物. 这些过程使电极活性材料的微结构也发生变化, 而且这种变化不是完全可逆的. 简言之, MH/Ni电池的物理导电机制是在正负极活性材料中嵌入和脱嵌的氢离子在电极间的定向迁移运动.     

Facile solid-phase synthesis of the diammoniate of diborane and its thermal decomposition behavior

The recent mechanistic finding of the hydrogen release pathways from ammonia borane (AB) has sparked new interest in the chemistry and properties of the diammoniate of diborane (DADB), an ionic isomer of AB. We herein report a facile one-step solid-phase synthesis route of DADB using inexpensive starting materials. Our study found that mechanically milling a 1?:?1 NaBH(4)/NH(4)F powder mixture causes the formation of crystalline DADB via a NH(4)BH(4) intermediate. The produced DADB can be readily separated from the sodium fluoride (NaF) by-product by a purification procedure using liquid ammonia at -78 °C. The thermal decomposition behavior of DADB was studied using synchronous thermal analyses, particularly in comparison with AB. It was found that the decomposition steps and products of DADB are similar to those of AB. But meanwhile, DADB exhibits a series of advantages over AB that merit its potential hydrogen storage application, such as lower dehydrogenation temperature, free of foaming and lack of an induction period in the thermal decomposition process. Our study further found that the volatile non-hydrogen products from DADB can be effectively suppressed by milling with MgH(2).