FTIR, 13C NMR,and GPC analysis of high‐propylene content co‐ and terpolymers with ethylene and higher α‐olefins synthesized with EtInd2ZrCl2/MAO

This article reports the results of propylene/α‐olefin copolymerization and propylene/ethylene/α‐olefin terpolymerization using low concentrations (less than 5 mol %) of long α‐olefins such as 1‐octene, 1‐decene, and 1‐dodecene. Kinetics data are presented and discussed. The highest activity was found with the longest α‐olefin studied (1‐dodecene). A possible explanation is proposed for this and other characteristics of the polymers obtained. The effect of low‐ethylene contents (4 mol % in the gas phase) on the copolymerization of propylene/α‐olefins was also examined. The polymers synthesized were characterized by ¹³C NMR, gel permeation chromatography, DSC, Fourier transform infrared spectroscopy, and wide‐angle X‐ray scattering. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2005–2018, 2001     

Multicenter nature of titanium‐based Ziegler–Natta catalysts: Comparison of ethylene and propylene polymerization reactions

This article discusses the similarities and differences between active centers in propylene and ethylene polymerization reactions over the same Ti‐based catalysts. These correlations were examined by comparing the polymerization kinetics of both monomers over two different Ti‐based catalyst systems, δ‐TiCl₃‐AlEt₃ and TiCl₄/DBP/MgCl₂‐AlEt₃/PhSi(OEt)₃, by comparing the molecular weight distributions of respective polymers, in consecutive ethylene/propylene and propylene/ethylene homopolymerization reactions, and by examining the IR spectra of “impact‐resistant” polypropylene (a mixture of isotactic polypropylene and an ethylene/propylene copolymer). The results of these experiments indicated that Ti‐based catalysts contain two families of active centers. The centers of the first family, which are relatively unstable kinetically, are capable of polymerizing and copolymerizing all olefins. This family includes from four to six populations of centers that differ in their stereospecificity, average molecular weights of polymer molecules they produce, and in the values of reactivity ratios in olefin copolymerization reactions. The centers of the second family (two populations of centers) efficiently polymerize only ethylene. They do not homopolymerize α‐olefins and, if used in ethylene/α‐olefin copolymerization reactions, incorporate α‐olefin molecules very poorly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1745–1758, 2003     

Classification of homogeneous copolymers of propylene and 1‐octene based on comonomer content

The solid‐state structure and properties of homogeneous copolymers of propylene and 1‐octene were examined. Based on the combined observations from melting behavior, dynamic mechanical response, morphology with primarily atomic force microscopy, X‐ray diffraction, and tensile deformation, a classification scheme with four distinct categories is proposed. The homopolymer constitutes Type IV. It is characterized by large α‐positive spherulites with thick lamellae, good lamellar organization, and considerable secondary crystallization. Copolymers with up to 5 mol % octene, with at least 28 wt % crystallinity, are classified as Type III. Like the homopolymer, these copolymers crystallize as α‐positive spherulites, however, they have smaller spherulites and thinner lamellae. Both Type IV and Type III materials exhibit thermoplastic behavior characterized by yielding with formation of a sharp neck, cold drawing, strong strain hardening, and small recovery. Copolymers classified as Type II have between 5 and 10 mol % octene with crystallinity in the range of 15–28%. Type II materials have smaller impinging spherulites and thinner lamellae than Type III copolymers. Moreover, the spherulites are α‐negative, meaning that they exhibit very little crystallographic branching. These copolymers also contain predominately α‐phase crystallinity. The materials in this category have plastomeric behavior. They form a diffuse neck upon yielding and exhibit some recovery. Type I copolymers have more than 10 mol % octene and less than 15% crystallinity. They exhibit a granular texture with the granules often assembled into beaded strings that resemble poorly developed lamellae. Type I copolymers crystallize predominantly in the mesophase. Materials belonging to this class deform with a very diffuse neck and also exhibit some recovery. They are identified as elastoplastomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4357–4370, 2004     

Copolymerization of propylene with various higher α‐olefins using silica‐supported rac‐Me2Si(Ind)2ZrCl2

The copolymerization of propylene with 1‐hexene, 1‐octene, 1‐decene, and 1‐dodecene was carried out with silica‐supported rac‐Me₂Si(Ind)₂ZrCl₂ as a catalyst. The copolymerization activities of the homogeneous and supported catalysts and the microstructures of the resulting copolymers were compared. The activity of the supported catalyst was only one‐half to one‐eighth of that of the homogeneous catalyst, depending on the comonomer type. The supported catalyst copolymerized more comonomer into the polymer chain than the homogeneous catalyst at the same monomer feed ratio. Data of reactivity ratios showed that the depression in the activity of propylene instead of an enhancement in the activity of olefinic comonomer was responsible for this phenomenon. We also found that copolymerization with α‐olefins and supporting the metallocene on a carrier improved the stereoregularity and regioregularity of the copolymers. The melting temperature of all the copolymers decreased linearly with growing comonomer content, regardless of the comonomer type and catalyst system. Low mobility of the propagation chain in the supported catalyst was suggested as the reason for the different polymerization behaviors of the supported catalyst with the homogeneous system. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3294–3303, 2001     

Ethylene/α‐olefin copolymerization with bis(β‐enaminoketonato) titanium complexes activated with modified methylaluminoxane

Copolymerizations of ethylene with α‐olefins (i.e., 1‐hexene, 1‐octene, allylbenzene, and 4‐phenyl‐1‐butene) using the bis(β‐enaminoketonato) titanium complexes [(Ph)NC(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = Ph, R₂ = CF₃; and 1c : R₁ = t‐Bu, R₂ = CF₃), activated with modified methylaluminoxane as a cocatalyst, have been investigated. The catalyst activity, comonomer incorporation, and molecular weight, and molecular weight distribution of the polymers produced can be controlled over a wide range by the variation of the catalyst structure, α‐olefin, and reaction parameters such as the comonomer feed concentration. The substituents R₁ and R₂ of the ligands affect considerably both the catalyst activity and comonomer incorporation. Precatalyst 1a exhibits high catalytic activity and produces high‐molecular‐weight copolymers with high α‐olefin insertion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6323–6330, 2005     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

Copolymerization of propylene with 1‐octene catalyzed by rac‐Me2Si(2,4,6‐Me3‐Ind)2ZrCl2/methyl aluminoxane

The copolymerization of propylene with 1‐octene was carried out with rac‐dimethylsilylbis(2,4,6‐trimethylindenyl)zirconium dichloride as a catalyst activated by methylaluminoxane (MAO) and an MAO/triisobutylaluminum mixture. The copolymerization conditions, including the polymerization temperature, Al/Zr molar ratio, and 1‐octene concentration in the feed, significantly influenced the catalyst activity, 1‐octene incorporation, polymer molecular weight, and melting temperature. The addition of 1‐octene to the polymerization system caused a decrease in the activity, whereas the melting temperature and intrinsic viscosity of the polymer increased. The microstructure of the propylene–1‐octene copolymer was characterized by ¹³C NMR, and the reactivity ratios of the copolymerization were estimated from the dyad distribution of the monomer sequences. The amount of regioirregular structures arising from 2,1‐ and 1,3‐misinserted propylene decreased as the 1‐octene content increased. The influence of the propagation chain on the polymerization mechanism is proposed to be the main reason for the changes in the reactivity ratios and regioirregularity with the polymerization conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4299–4307, 2000     

Synthesis,characterization, and ethylene (Co)polymerization behavior of trichlorotitanium 2‐(1‐(arylimino)propyl)quinolin‐8‐olates

A series of trichlorotitanium complexes containing 2‐(1‐(arylimino)propyl)quinolin‐8‐olates was synthesized by stoichiometric reaction of titanium tetrachloride with the corresponding potassium 2‐(1‐(arylimino)propyl)quinolin‐8‐olates and was fully characterized by elemental analysis, nuclear magnetic resonance spectroscopy, and by single‐crystal X‐ray diffraction study of representative complexes. All titanium complexes, when activated with methylaluminoxane, exhibited high catalytic activity toward ethylene polymerization [up to 1.15 × 10⁶ g mol^?1(Ti) h^?1] and ethylene/α‐olefin copolymerization [up to 1.54 × 10⁶ g mol^?1 (Ti) h^?1]. The incorporation of comonomer was confirmed to amount up to 2.82 mol % of 1‐hexene or 1.94 mol % of 1‐octene, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of highly thermostable norbornene‐isoprene‐1‐octene terpolymer with titanium catalyst

Terpolymerization of norbornene (NB), isoprene (IP), and 1‐octene was achieved by using fluorenylamido‐ligated titanium catalyst, which showed very high activity for the copolymerization of NB and various α‐olefins. The content of IP in the terpolymer was controlled by the feed ratio and reaction temperature up to 7 mol %. The incorporated IP was mainly inserted in 1,4‐addition. The polymer was dissolved into common solvents such as toluene and chloroform, which enabled the preparation of a transparent film by solution casting process. The degradation temperature of the terpolymer was comparable with other cyclic olefin copolymers and the glass transition temperature (T_g) was higher than that of NB‐1‐octene copolymer with almost the same NB content. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2136–2140     

The copolymerization of propylene with higher,linear α‐olefins

Propylene was copolymerized with the linear α‐olefins 1‐octene, 1‐decene, 1‐tetradecene, and 1‐octadecene. The metallocene catalyst Me₂Si(2‐Me Benz[e]Ind)₂ZrCl₂, in conjunction with methylalumoxane as a cocatalyst, was used to synthesize the copolymers. The copolymers were characterized by ¹³C and ¹H NMR with a solvent mixture of 1,2,4‐trichlorobenzene (TCB) and benzene‐d₆ (9/1) at 100 °C. Thermal analyses were carried out to determine the melting and crystallization temperatures, whereas the molecular weights and molecular weight distributions were determined by gel permeation chromatography with TCB at 140 °C. Glass‐transition temperatures were determined with dynamic mechanical analysis. Relationships among the comonomer type and amount of incorporation and the melting/crystallization temperatures, glass‐transition temperature, crystallinity, and molecular weight were established. Moreover, up to 3.5% of the comonomer was incorporated, and there was a decrease in the molecular weight with increased comonomer content. Also, the melting and crystallization temperatures decreased as the comonomer content increased, but this relationship was independent of the comonomer type. In contrast, the values for the glass‐transition temperature also decreased with increased comonomer content, but the extent of the decrease was dependent on the comonomer type. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4110–4118, 2000     

Copolymerizations of propylene with functionalized long‐chain α‐olefins using group 4 organometallic catalysts and their membrane application

Introduction of functional groups into polyolefins has the potential of broadening their end use. An attractive method for preparing polyolefins containing functional groups is the copolymerization of the olefins with α‐olefins containing a functional group. Copolymerizations of propylene with 10‐undecen‐1‐ol, containing a hydroxyl group protected by either TIBA or TBDMSCl, 11‐chloro‐1‐undecene, 5‐bromopent‐1‐ene and N‐allyl‐2,2,2‐trifluoroacetamide were performed using three organometallic catalysts: the metallocene rac‐Et(Ind)₂ZrCl₂ and two new benzamidinate catalysts [3‐C₅H₄NC(NSiCH₃)₂]₂TiCl₂ and [(m‐OMe‐C₆H₄NC(NSiCH₃)₂]₂ZrCl₂. 10‐Undecene‐1‐ol protected “in situ” with TIBA and N‐(dec‐9‐enyl)‐2,2,2‐trifluoroacetamide gave copolymers with similar polar monomer incorporation percentages and molecular weights 17%; 28,900 g/mol for the protected 10‐undecene‐1‐ol, and 15%; 27,100 g/mol for N‐(dec‐9‐enyl)‐2,2,2‐trifluoroacetamide. 11‐Chloro‐1‐undecene gave copolymers with up to 22% incorporation for 0.12 M of the comonomer in the reaction feed. The obtained copolymers were characterized by NMR, DSC, and GPC. Membranes were prepared from two copolymers containing the hydroxyl groups (6 and 10%) and one copolymer containing chlorine groups (7%). The membranes prepared could be wetted in contrast to polypropylene membranes which do not contain functional groups. In addition, it was observed that for both type of membranes prepared from the different copolymers containing the hydroxyl groups, the flux was significantly greater than for the membrane prepared from the copolymer containing a chlorine groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymerization of ethylene with linear α‐olefins by 2‐phosphinophenolate nickel catalysts

2‐Dicyclohexyl‐ and 2‐diphenylphosphinophenol, CCHH and PPHH , react with Ni(1,5‐COD)₂ to form catalysts for polymerization of ethylene in or copolymerization with α‐olefins. The more P‐basic CCHH/Ni catalyst allows concentration‐dependent incorporation of olefins to give copolymers with isolated side groups and higher molecular weights, whereas the PPHH/Ni catalyst undergoes mainly stabilizing interactions with the olefins and leads to ethylene oligomers with no or marginal olefin incorporation. Pressure–time plots of the batch reactions show that the ethylene conversion is usually slower by catalysis with CCHH/Ni than by PPHH/Ni . The microstructure of the copolymers was determined by ¹³C NMR spectra, the number of side groups per main chain was estimated by ¹H NMR analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 258–266, 2009     

Homogeneous tandem catalysis of the bis‐(diphenylphosphino)‐amine/chromium tetramerization catalyst with metallocene catalysts

Homogeneous tandem catalysis of the bis(diphenylphoshino)amine‐chromium oligomerization catalyst with the metallocenes Ph₂C(Cp)(9‐Flu)ZrCl₂ and rac‐EtIn₂ZrCl₂, is discussed. GC, CRYSTAF, and ¹³C NMR analysis of the products obtained from reactions at constant temperatures show that during tandem catalysis, α‐olefins, mainly 1‐hexene and 1‐octene, are produced from ethylene by the oligomerization catalyst and subsequently built into the polyethylene chain. At 40 °C the Cr/PNP catalyst acts as a tetramerization catalyst while the polymerization catalyst activity is low. Copolymerization of ethylene and the in situ produced α‐olefins have also been carried out by increasing the temperature from 40 °C, where primarily oligomerization takes place, to above 100 °C, where polymerization becomes dominant. The melting temperature of the polymer is dependent on the catalyst and cocatalyst ratios as well as on the temperature gradient followed during the reaction, while the presence of the oligomerization catalyst reduces the activity of the polymerization catalyst. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6847–6856, 2006     

Hydrogen effects in propylene polymerization reactions with titanium‐based Ziegler–Natta catalysts. I. Chemical mechanism of catalyst activation

The hydrogen activation effect in propylene polymerization reactions with Ti‐based Ziegler–Natta catalysts is usually explained by hydrogenolysis of dormant active centers formed after secondary insertion of a propylene molecule into the growing polymer chain. This article proposes a different mechanism for the hydrogen activation effect due to hydrogenolysis of the Ti? iso‐C₃H₇ group. This group can be formed in two reactions: (1) after secondary propylene insertion into the Ti? H bond (which is generated after β‐hydrogen elimination in the growing polymer chain or after chain transfer with hydrogen), and (2) in the chain transfer with propylene if a propylene molecule is coordinated to the Ti atom in the secondary orientation. The Ti? CH(CH₃)₂ species is relatively stable, possibly because of the β‐agostic interaction between the H atom of one of its CH₃ groups and the Ti atom. The validity of this mechanism was demonstrated in a gas chromatography study of oligomers formed in ethylene/α‐olefin copolymerization reactions with δ‐TiCl₃/AlEt₃ and TiCl₄/dibutyl phthalate/MgCl₂–AlEt₃ catalysts. A quantitative analysis of gas chromatography data for ethylene/propylene co‐oligomers showed that the probability of secondary propylene insertion into the Ti? H bond was only 3–4 times lower than the probability of primary insertion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1353–1365, 2002     

Copolymerization of ethylene or propylene with α‐olefins containing hydroxyl groups with zirconocene/methylaluminoxane catalyst

Copolymerization of olefins (ethylene and propylene) and 5‐hexen‐1‐ol pretreated with alkylaluminum was performed using [dimethysilylbis(9‐fluorenyl)]zirconium dichloride/methylaluminoxane as the catalyst. The copolymerization required extra addition of alkylaluminum to prevent deactivation of the catalyst when 5‐hexen‐1‐ol was pretreated with trimethylaluminum, whereas the triisobutylaluminum‐treated system did not require any addition of alkylaluminum. The molecular weight of the copolymer depended on the kind of alkylaluminum compound (masking reagent, additive, and cocatalyst). ¹³C NMR analysis proved that poly(ethylene‐co‐5‐hexen‐1‐ol) containing 50 mol % of 5‐hexen‐1‐ol acted as an alternating copolymer, whereas the poly(propylene‐co‐5‐hexen‐1‐ol) acted as a random copolymer. The surface property of the copolymers was simply evaluated by means of water drop contact angle measurement. It was found that the copolymers containing large amounts of 5‐hexen‐1‐ol units showed good hydrophilic properties. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 52–58, 2004     

Structure and separation properties of π‐complex membranes comprising poly(hexamethylenevinylene) and silver tetrafluoroborate

Polymer/silver‐ion π‐complex membranes consisting of poly(hexamethylenevinylene) (PHMV) and silver tetrafluoroborate exhibit unusually high separation performance for olefin/olefin and olefin/paraffin mixtures. The formation of π complexes between silver ions and unsaturated C?C bonds of PHMV has been confirmed with wide‐angle X‐ray scattering, differential scanning calorimetry, and X‐ray photoelectron spectroscopy. Fourier transform infrared and ultraviolet spectroscopy studies have revealed that silver ions make π complexes with olefins such as 1,3‐butadiene, propylene, and ethylene. Of these three olefins, 1,3‐butadiene has the highest binding affinity with silver ions in dissolved in PHMV, and this results in its higher solubility and permeance. Therefore, the π‐complex membranes exhibit unusually high separation performance for olefin/olefin and olefin/paraffin mixtures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1434–1441, 2006     

Crosslinkable poly(propylene carbonate): High‐yield synthesis and performance improvement

A crosslinking strategy was used to improve the thermal and mechanical performance of poly(propylene carbonate) (PPC): PPC bearing a small moiety of pendant C?C groups was synthesized by the terpolymerization of allyl glycidyl ether (AGE), propylene oxide (PO), and carbon dioxide (CO₂). Almost no yield loss was found in comparison with that of the PO and CO₂ copolymer when the concentration of AGE units in the terpolymer was less than 5 mol %. Once subjected to UV‐radiation crosslinking, the crosslinked PPC film showed an elastic modulus 1 order of magnitude higher than that of the uncrosslinked one. Moreover, crosslinked PPC showed hot‐set elongation at 65 °C of 17.2% and permanent deformation approaching 0, whereas they were 35.3 and 17.2% for uncrosslinked PPC, respectively. Therefore, the PPC application window was enlarged to a higher temperature zone by the crosslinking strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5329–5336, 2006     

Multi‐center nature of heterogeneous Ziegler–Natta catalysts: TREF confirmation

A new approach to detailed Tref analysis of ethylene/α‐olefin copolymers prepared with multi‐center polymerization catalysts is developed. It is based on resolution of complex Tref curves into elemental components described with the Lorentz distribution function. This approach was applied to the study of a series of ethylene/1‐butene copolymers prepared with a supported Ti‐based catalyst. The analysis showed that the copolymers, which, on average, contain from 6.5 to 3.5 mol % of 1‐butene, consist of seven discrete components with different compositions, ranging from a completely amorphous material with a 1‐butene content of > 15–20 mol %, to two highly crystalline components with 1‐butene contents < 1 mol %. A comparison of these Tref results with the data on the molecular weight distribution of the copolymers (based on resolution of their GPC curves) shows that Tref and GPC data provide complimentary information on the properties of active centers in the catalysts in terms of the molecular weights of the material they produce and their ability to copolymerize α‐olefins with ethylene. Tref analysis of copolymers produced at different reaction times showed that the active centers responsible for the formation of various Tref components differ in the rates of their formation and in stability. The centers that produce copolymer molecules with a high 1‐butene content are formed rapidly but decay rapidly as well whereas the centers producing copolymer molecules with a low 1‐butene content are formed more slowly but are more stable. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4351–4362, 2005     

Ethylene/1‐heptene copolymers as interesting alternatives to 1‐octene‐based LLDPE: Molecular structure and physical properties

Classical linear low density polyethylenes (LLDPEs) are copolymers of ethylene and 1‐octene or 1‐hexene, respectively. In the past, other 1‐olefins have been tested as comonomers but the resulting LLDPEs were never commercialized as large scale products. The present study focuses on the use of 1‐heptene as an interesting comonomer for the synthesis of LLDPE. For a comparison of the molecular structure and the physical properties of 1‐heptene‐ and 1‐octene‐based LLDPEs, five Ziegler–Natta LLDPEs of varying comonomer contents based on 1‐heptene and 1‐octene, respectively, were acquired and analysed using advanced methods. The comonomer contents of the resins were between 0.35 and 6.4 mol %. Crystallization‐based techniques revealed similar bimodal distributions that are due to the formation of copolymer and polyethylene homopolymer fractions. The compositional distribution of the copolymers was studied by high‐temperature (HT) HPLC and HT‐2D‐LC. The analytical results indicate similar chemical heterogeneities and molar mass distributions of the two sets of LLDPE up to a comonomer content of 3 mol %. Similar to the molecular structure, the physical properties of the materials are quite similar. At comonomer contents of ≥3 mol % differences between the two sets of samples are seen that are attributed to differences in the abilities of 1‐heptene and 1‐octene in disrupting the crystal arrangements of the polymer chains in solid state. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 962–975