Preparation and polymerization mechanism of dihydroxy-capped PCL,poly(CL-b-PEG-b-CL) and poly(DTC-b-CL-b-DTC)

PCL possesses a wide range of medical applications, such as tissue engineering and controlled drug release, because of its good biodegradability and miscibility. In order to extend the use of PCL, researchers have been exploring its structural and chemica…     

Preparation and characterization of microspheres based on blend of poly(lactic acid) and poly(ɛ-caprolactone) with poly(vinyl alcohol) as emulsifier

In this paper, microspheres were prepared by oil-in-water (o/w) emulsion solvent evaporation method. Biodegradable polymer such as blend of poly (lactic acid) (PLA) and poly(?-caprolactone) (PCL) with certain compositions and characteristics was used to prepare the microspheres with poly(vinyl alcohol) (PVA) as an emulsifier. This study observed the microspheres particle’s size distribution at various concentrations of PVA (1%, 1.5%, 2%, and 2.5% PVA). The PVA volume variations effects during the process (50, 100, 150, 200, and 250 mL) were also observed. The blend of PLA and PCL is formed only by physical interaction between them. This can be seen from the FTIR spectrum which shows both PLA and PCL component. The microspheres physical size and appearance were observed by optical microscope (MO). The overall results of this study showed that the formula which used 50–150 mL of 2.5% polyvinyl alcohol produced the microspheres with the most uniform size distribution.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.     

The endothermic “annealing peak” of poly(phenylene sulphide) and poly(ethylene terephthalate)

The appearance of an endothermic annealing peak in semicrystalline poly(phenylene sulphide) and semicrystalline poly(ethylene terephthalate) after annealing at or above the cold-crystallization temperature is investigated by temperature-modulated differential scanning calorimetry, thermo-mechanical analysis and dynamic-mechanical analysis. The results indicate relaxation processes in the interlamellar amorphous phase, which is in a strongly constrained state after cold crystallization. During the annealing treatments rearranging processes take place. These processes result in a separation of the amorphous phase into an interlamellar relaxed and a “pseudo-crystalline” phase. Received: 27 October 1998 Accepted in revised form: 19 January 1999     

Phase separation and phase dissolution in poly(ε-caprolactone)/poly(styrene-co-acrylonitrile) blend

A blend of poly(ε-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) (SAN) containing 27.5 wt% of acrylonitrile having the critical composition (80/20 PCL/SAN) was studied. This PCL/SAN blend having a lower critical solution temperature (LCST) phase boundary at 122 °C offered an excellent opportunity to investigate, firstly the kinetics of phase separation above LCST (125-180 °C), and secondly the kinetics of phase dissolution below LCST (50-115 °C). The blend underwent a temperature-jump above LCST where spinodal decomposition (SD) proceeded, yielding a regularly phase-separated structure (SD structure). Then, it was quenched to the temperatures below LCST when the phase dissolution proceeded. Optical microscopy was used to observe the spinodal decomposition qualitatively while light scattering was used to characterize the phase separation and phase dissolution quantitatively. It was found that during phase dissolution the peak maximum moved towards a smaller angle (wavelength of concentration fluctuations increased) while the peak intensity decreased. This behavior was explained by a model. Also it was found that the fastest phase dissolution kinetics at 80 °C, which was characterized by an apparent diffusion coefficient, was about 10 times slower than the kinetics of phase separation at 180 °C.     

Swelling–shrinking behaviors of poly(N-isopropylacrylamide) and poly(N-n-propylacrylamide) gels prepared by chemical and radiation crosslinking methods

The swelling and shrinking kinetics of thermosensitive gels based on N-isopropylacrylamide (NiPAAm) and N-n-propylacrylamide (NnPAAm) were studied. Four gels cylindrical in shape were prepared by two different methods: γ-ray irradiation to aqueous solutions of poly(NiPAAm) (PNiPAAm) or poly(NnPAAm) (PNnPAAm) and redox polymerization of NiPAAm or NnPAAm monomer using N,N′-methylenebisacrylamide as a crosslinker. There were a few differences in the swelling kinetics among these gels. However, a marked difference was observed in the shrinking processes, the rate of which was faster in the order of radiation-crosslinked PNiPAAm gel > radiation-crosslinked PNnPAAm gel > chemically crosslinked PNnPAAm gel > chemically crosslinked PNiPAAm gel. This difference was discussed in terms of the microscopic structure of the gels, which was studied by light scattering techniques. It was found that the static inhomogeneities frozen in the chemically and radiation-crosslinked gels play a key role in their shrinking kinetics.     

Preparation of new poly(ester triazole) and poly(amide triazole) by “click chemistry”

New dialkynyl monomers containing furan and ester or amide units were prepared via three step reactions from ethyl furan-2-carboxylate. Their click polymerization with either poly(ethylene glycol) diazide or poly(tetrahydrofuran) diazide catalyzed by Cu(I) led to corresponding amorphous poly(ester triazole) and poly(amide triazole) with molecular weights in the range of (7–11) × 10³ and with glass transition temperatures in the range of ?35 and ?19°C. The temperature at 5% wt loss (T ₁₀), determined from TGA of polyazomethines were in the range 345–365°C indicating their good thermal stability.     

Thermal degradation of two classes of block copolymers based on poly(lactic-glycolic acid) and poly(ϵ-caprolactone) or poly(ethylene glycol)

Thermodegradative investigations of two classes of multi-block copolymers containing poly(D,L-lactic-glycolic acid) (PLGA) and either poly(ethylene glycol) (PEG) or poly(ϵ-caprolactone) diol-terminated (PCDT) segments were performed. In particular, the influence of the type and length of the segments as well as of the molar ratio between the D,L-lactic acid (LA) and glycolic acid (GA) residues was investigated at 180°C in air by viscometry, FT-IR analysis and isothermal thermogravimetry. The thermal oxidative degradation of these materials is largely affected by the LA/GA ratio, a higher LA content generally imparting higher stability. The FT-IR analysis suggests that, depending on the composition of the PLGA segments, degradative processes are triggered which can lead to a preferential degradation of the blocks.     

Solubility of naphthalene in aqueous solutions of poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) triblock copolymers and (2-hydroxypropyl)cyclodextrins

The solubility of naphthalene was investigated in aqueous solutions of triblock copolymers poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) (PEG–PPG–PEG) and (2-hydroxypropyl)cyclodextrins. The results with solutions of the individual solubilizers were as expected: the solubility enhancement was much higher with a micelle-forming copolymer than with the non-micellizing one and with (2-hydroxypropyl)--cyclodextrin (HPBCD) than with (2-hydroxypropyl)--cyclodextrin (HPACD). Although the formation of inclusion complexes between HPACD and PEG and between HPBCD and PPG is well established, the naphthalene solubility in mixed solutions does not significantly deviate from that predicted for a mixture of independent solubilizers. Thus the interactions between HPCD and PEG–PPG–PEG copolymers are not strong enough to disrupt micelles and aggregates formed by those copolymers. In fact, slight synergetic deviations were observed with the micellizing copolymer, indicating the existence of ternary naphthalene/HPCD/copolymer interactions. For pharmaceutical applications, it is important that the solubilization efficacy of PEG–PPG–PEG copolymers and that of cyclodextrins modified by the 2-hydroxypropyl group would not be compromised if these two types of solubilizers were co-administered.     

Anionically prepared poly(ε-caprolactam-co-ε-caprolactone) and poly(ε-caprolactam-co-δ-valerolactone) copolymers: Thermal and mechanical properties

Thermal and representative physico-mechanical properties of newly prepared poly[(ε-caprolactam)-co-(ε-caprolactone)] and poly[(ε-caprolactam)-co-(δ-valerolactone)] copolymers were studied. The copolymers were synthesized by anionic polymerization of ε-caprolactam activated by isocyanate end-capped oligomeric aliphatic polyesters designated as the macroactivators (MAs). Type, concentration and molecular weight of the MAs were varied, which resulted in copolymers with different structure and properties. The impact of the new MAs used in this study on the glass transition temperature and the melting temperature of poly-ε-caprolactam was investigated by DSC. DMTA was used to analyze the effect of copolymerization on the storage modulus (E^′) and tan δ of poly-ε-caprolactam. Conventional and high-resolution TGA data revealed that all the synthesized polyesteramides possess good thermal stability. Mechanical properties were studied by notched impact and tensile testing. According to the experimental data the impact toughness increase with the MA content, being six time higher compared to the poly(ε-caprolactam) in the best situation. Water absorption was also considered in relation to the composition of the copolymers.     

Surface patterning and biological evaluation of semi-interpenetrated poly(HEMA)/poly(alkyl β-malolactonate)s

Semi-interpenetrating hydrogel networks were prepared by radical polimerization of monomer HEMA, co-monomer EGDMA as cross-linking agent and in the presence of 1 wt % of poly(alkyl β-malolactonate)s. Biological evaluation in terms of cell adhesion and proliferation of the prepared materials showed the ability of HEMA-based hydrogels to sustain a good cell adhesion and proliferation. Moreover, a method based on soft-lithography to obtained surface microstructured semi-interpenetrating hydrogel networks was developed, thus allowing for further investigation of the influence of surface topography on cell behavior.     

“Smart” carboxymethylchitosan hydrogels crosslinked with poly(N-isopropylacrylamide) and poly(acrylic acid) for controlled drug release

Carboxymethylchitosan (CMC) hydrogels containing thermo-responsive poly(N-isopropylacrylamide) (poly(NIPAAm)) and pH-responsive poly(acrylic acid) (poly(AA)) were prepared via a free radical polymerization in the presence of hexamethylene-1,6-di-(aminocarboxysulfonate) crosslinking agents. A proper ratio of CMC to NIPAAm and AA used in the reaction was investigated such that the thermo- and pH-responsive properties of the hydrogels were obtained. Water swelling of the hydrogels was improved when the solution pH was in basic conditions (pH 10) or the temperature was below its lower critical solution temperature (LCST). Effects of the change in solution temperature and pH on water swelling properties of the hydrogel as well as the releasing rate of an entrapped drug were also investigated. The hydrogels were not toxic and showed antibacterial activity against Straphylococcus aureus (S. aureus). The pH- and thermo-responsive properties of this novel “smart” hydrogel might be efficiently used as dual triggering mechanisms in controlled drug release applications.     

Enzymatic synthesis of poly(α-ethyl β-aspartate) by poly(ethylene glycol) modified poly(aspartate) hydrolase-1

We recently discovered that poly(aspartate) (PAA) hydrolase‐1 from Pedobacter sp. KP‐2 has a unique property of specifically cleaving the amide bond between β‐aspartate units in thermally synthesized PAA (tPAA). In the present study, the enzymatic synthesis of poly(α‐ethyl β‐aspartate) (β‐PAA) was performed by taking advantage of the substrate specificity of PAA hydrolase‐1. No polymerization of diethyl L ‐aspartate by native PAA hydrolase‐1 occurred because of the low dispersibility of the enzyme in organic solvent. Poly(ethylene glycol) (PEG) modification of the enzyme improved its dispersibility and enabled it to polymerize the monomer substrate. MALDI‐TOF MS analysis showed that the synthesized polymer was observed in the range of m/z = 750–2 500. This analysis also revealed that the polymer was composed of ethyl aspartate units, containing either an ethyl ester or a free carboxyl end group at its carboxyl terminus. ¹H NMR analysis demonstrated that the synthesized polymer consisted of only β‐amide linkages. Thus, the present results indicate that PAA hydrolase‐1 modified with PEG is useful for the synthesis of β‐PAA due to its unique substrate specificity and good dispersibility in organic solvent.

     

The behavior of poly(ε -caprolactone) and poly(ethylene oxide)-b-poly(ε -caprolactone) grafted to a poly(glycerol adipate) backbone at the air/water interface

The behavior of crystallizable poly(ε-caprolactone) (PCL) and poly(ε-caprolactone)-b-poly(ethylene oxide) (PCL-b-PEO) is studied at the air/water interface prior and after grafting to an amorphous poly(glycerol adipate) (PGA) backbone (PGA-g-PCL, PGA-g-(PCL-b-PEO)). Langmuir isotherms are measured and the structure formation in the monolayers on the water surface is followed by Brewster angle microscopy (BAM) and in Langmuir–Blodgett films after a transfer to silicon substrates by atomic force microscopy (AFM). It is observed that PGA-g-PCL forms significantly smaller crystals on the water surface and has smaller crystallization rate compared to PCL homopolymers of identical molar masses as the grafted chains. In contrast to crystals formed by linear PCL, the crystals formed by grafted PCL in PGA-g-PCL do not melt (readsorb at the water surface) in an expansion cycle on the Langmuir trough. Additionally, increasing the subphase temperature at constant surface area significantly above the melting point of linear PCL in bulk results in the formation of a mesophase, and it does lead to the disappearance of crystals. The isotherms of PGA-g-(PCL-b-PEO) show a transition at the surface pressure of ～10 mN/m. This is related to the fact that PEO chains leave the water surface and submerge into the subphase and/or the crystallization of PCL chains. The monolayer collapse appears in an extended plateau region starting at π values of ～30 mN/m. AFM images of Langmuir–Blodgett films reveal that PCL chains in PGA-g-PCL and PGA-g-(PCL-b-PEO) form lamellar crystals with a disk-shape and interconnected platelets, respectively.     

Synthesis and characterization of trimethoxysilyl-functionalized poly(phthalazinone ether ketone)

A novel alkoxysilyl-functionalized poly(phthalazinone ether ketone)(PPEK)was prepared for the boundary lubricant application in micro-electro-mechanical system(MEMS).The synthesis of functionalized PPEK was started from the hydro- xylation of PPEK,then following with the corresponding ring-opening reaction of 3-glycidoxypropyltrimethoxysilane(GPTMS). The structures of the functional PPEK were confirmed by FTIR,~1H NMR,~(29)Si NMR,and UV-vis spectrum.     

Synthesis and characterization of silver—poly(methylmethacrylate) nanocomposites

The optical properties of silver nanoparticles embedded in poly(methylmethacrylate) (PMMA) was investigated as well as the influence of silver nanoparticles on the thermal properties of polymer matrix. The average size and particle size distribution of silver nanoparticles was determined using transmission electron microscopy. The obtained transparent nanocomposite films were optically characterized using UV-Vis and FTIR spectroscopy. Thermal stability of polymer matrix was improved upon incorporation of small amount of silver nanoparticles. Also, silver nanoparticles have pronounced effect on thermo-oxidative stability of PMMA matrix. The glass transition temperatures of nanocomposites are lower compared to the pure polymer.     

Self-diffusion in poly(N -vinyl pyrrolidone) – poly(ethylene glycol) systems

 We have applied the PFG NMR technique to investigate the translational mobility in the PVP-PEG system as a function of composition and temperature at the stages of PVP-PEG complex formation, its swelling, and dissolution in excess of liquid PEG. It has been found that the variations of the spin-echo attenuation with PEG content, water amount, and temperature reflect the different stages. The first two stages are characterized by a distribution of the self-diffusion coefficients of PEG involved in the network. The dissolution shows two diffusion coefficients; the fast one is attributed to PEG molecules, the slow one to the associates of PEG and PVP. The temperature dependencies can be described by an Arrhenius law with an activation energy depending on the composition of the blend. The concentration dependence of the PEG self-diffusion coefficients in the blend occurred to be independent of the molecular weight of PVP. The results are discussed in terms of the Mackie-Meares model. Received: 23 August 2000 Accepted: 19 October 2000     

The combination of fluctuation-assisted crystallization and interface-assisted crystallization in a crystalline/crystalline blend of poly(ethylene oxide) and poly(ε-caprolactone)

The nucleation and crystallization of poly(ethylene oxide) (PEO) and poly(ε-caprolactone) (PCL) in the PEO/PCL blends have been investigated by means of optical microscopy (OM) and differential scanning calorimetry (DSC). During the isothermal or nonisothermal crystallization process, when the adjacent PEO is in the molten state, PCL nucleation preferentially occurs at the PEO and PCL interface; after the crystallization of the adjacent PEO, much more PCL nuclei form on the surface of the PEO crystal. However, PEO crystallizes normally and no interfacial nucleation occurs in the blend. The concentration fluctuation caused by liquid–liquid phase separation (LLPS) induces the motion of PEO and PCL chains through interdiffusion and possible orientation of chain segments. The oriented PEO chain segments can assist PCL nucleation, and the heterogeneous nucleation ability of PEO increases with the orientation of PEO chains. Oriented PCL chain segments have no heterogeneous nucleation ability on PEO. It is postulated that the interfacial nucleation of PCL in the PEO/PCL blend follows the combination of “fluctuation-assisted crystallization” and “interface-assisted crystallization” mechanisms.