Reaktionen von Lithiumhydridosilylamiden RR′(H)Si–N(Li)R″ mit Chlortrimethylsilan in Tetrahydrofuran und unpolaren Lösungsmitteln: N‐Silylierung und/oder Cyclodisilazanbildung

Reactions of Lithium Hydridosilylamides RR′(H)Si–N(Li)R″ with Chlorotrimethylsilane in Tetrahydrofuran and Nonpolar Solvents: N‐Silylation and/or Formation of Cyclodisilazanes The lithiumhydridosilylamides RR′(H)Si–N(Li)R″ ( 2 a : R = R′ = CHMe₂, R″ = SiMe₃; 2 b : R = R′ = Ph, R″ = SiMe₃; 2 c : R = R′ = CMe₃, R″ = SiMe₃; 2 d : R = R′ = R″ = CMe₃; 2 e : R = Me, R′ = Si(SiMe₃)₃, R″ = CMe₃; 2 f – 2 h : R = R′ = Me, f : R″ = 2,4,6‐Me₃C₆H₂, g : R″ = SiH(CHMe₂)₂, h : R″ = SiH(CMe₃)₂; 2 i : R = R′ = CMe₃, R″ = SiH(CMe₃)₂) were prepared by reaction of the corresponding hydridosilylamines RR′(H)Si–NHR″ 2 a – 2 i with n‐butyllithium in equimolar ratio in n‐hexane. The unknown amines 1 e – 1 i and amides 2 f – 2 i have been characterized spectroscopically. The wave numbers of the Si–H stretching vibrations and ²⁹Si–¹H coupling constants of the amides are less than of the analogous amines. This indicates a higher hydride character for the hydrogen atom of the Si–H group in the amide in comparison to the amines. The ²⁹Si‐NMR chemical shifts lie in the amides at higher field than in the amines. The amides 2 a – 2 c and 2 e – 2 g react with chlorotrimethylsilane in THF to give the corresponding N‐silylation products RR′(H)Si–N(SiMe₃)R″ ( 3 a – 3 c , 3 e – 3 g ) in good yields. In the reaction of 2 i with chlorotrimethylsilane in molar ratio 1 : 2,33 in THF hydrogen‐chlorine exchange takes place and after hydrolytic work up of the reaction mixture [(Me₃C)₂(Cl)Si]₂NH ( 5 a ) is obtained. The reaction of the amides 2 a – 2 c , 2 f and 2 g with chlorotrimethylsilane in m(p)‐xylene and/or n‐hexane affords mixtures of N‐substitution products RR′(H)Si–N(SiMe₃)R″ ( 3 a – 3 c , 3 f , 3 g ) and cyclodisilazanes [RR′Si–NR″]₂ ( 6 a – 6 c , 6 f , 6 g ) as the main products. In case of the reaction of 2 h the cyclodisilazane 6 h was obtained only. 2 c – 2 e show a very low reactivity toward chlorotrimetyhlsilane in m‐xylene and toluene resp.. In contrast to Me₃SiCl the reactivity of 2 d toward Me₃SiOSO₂CF₃ and Me₂(H)SiCl is significant higher. 2 d react with Me₃SiOSO₂CF₃ and Me₂(H)SiCl in n‐hexane under N‐silylation to give RR′(H)Si–N(SiMe₃)R″ ( 3 d ) and RR′(H)Si–N(SiHMe₂)R″ ( 3 d ′) resp. The crystal structures of [Me₂Si–NSiMe₃]₂ ( I ) ( 6 f , 6 g and 6 h ) have been determined.     

ÜBER EINIGE REAKTIONEN DER DIALKYLBENZYLPHOSPHINIMIDE

Abstract

Dialkylbenzylphosphine imides C₆H₅CH₂–PRR′[dbnd]N″ (R, R′ = CH₃, C₂H₅; R″ = H, CH₃, Si(CH₃)₃ react with aliphatic and aromatic aldehydes in benzene solution on heating to 80°C directly and in high yields according to a Horner-Wittig-reaction with formation of an olefine whereas ketones like benzophenone and acetophenone only perform an O/NR″ exchange (R″ = H).

Dialkylbenzylphosphinimide C₆H₅CH₂–PRR′[dbnd]N″ mit R, R′ = CH₃, C₂H₅ und R″ = H, CH₃, Si(CH₃)₃ reagieren mit aliphatischen und aromatischen Aldehyden in benzolischer Lösung beim Erwärmen auf 80°C direkt und mit hohen Ausbeuten im Sinne einer Horner-Wittig-Reaktion unter Olefinbildung, während sich mit Ketonen wie Benzophenon oder Acetophenon nur ein O/NR″-Austausch (R″ = H) vollzieht.     

Reactions of Titanium Alkoxides with N-Methylaminoalcohols

N-methylaminoalkoxides of titanium of the type Ti(OR)_4?n(O · CHR′ · CH₂ · NR″R?)_n where R = Et and Pr¹; n = 1–4; and R′ = R″ = H, R? = Me; R′ = H, R″ = R? = Me; R′ = R″ = R? = Me, synthesized by the reactions of titanium alkoxides with aminoalcohols, show interesting variations in their properties like physical state, volatility and molecular complexity. I.r. and p.m.r. spectra of these derivatives have been recorded. A few interchange reactions with methanol and tert-butanol have also been carried out. These aminoalkoxides get cleaved with acetyl chloride and undergo insertion reactions with phenylisocyanate, thus providing the first examples of insertion reactions in such derivatives.     

Coordination complexes of acetylenic phosphines and diphosphines : V. Acetylene bridged derivatives of dicobalt octacarbonyl

Reactions of the phosphinoacetylenes RR′PCCR″ (R  R′  Ph, R″  H, CF₃, Ph, Me, t-Bu; R  R′  C₆F₅, R″  Ph, Me; R  Ph, R′  Me, R″  Me) with Co₂(CO)₈ have been studied. Complexes of four types have been characterised: (A)(RR′PC₂R″)CO₂(CO)₆ (R  R′  C₆F₅, R″  Ph, Me; R  R′  Ph, R″  t-Bu), (B) (RR′PC₂R″)₂Co₄(CO)₁₀ (R  R′  Ph, R″  H, CF₃, Ph, Me; R  R′  C₆F₅, R″  Me; R  Ph, R′  Me, R″  Me), (C) (RR′PC₂R″)₂Co₂(CO)₆ (R  R′  Ph, R″  t-Bu), (D) (RR′P(O)C₂R″)Co₂(CO)₆ (R  R′  Ph, R″  t-Bu; R  R′  C₆F₅, R  Ph). The complexes were characterised by microanalysis, IR, NMR and where possible mass spectra. Substitution reactions of the complexes with tertiary phosphites are described. In complexes of type (A) only the alkyne function is utilised whereas the tetranuclear compounds (B) have structures in which both alkyne and phosphorus moieties are coordinated. Compounds of type (C) are simple disubstituted phosphine complexes of Co₂(CO)₈ and those of type (D) are μ-alkyne derivatives of acetylenic phosphine oxides. The mechanism of formation of complexes of type (B) is discussed in the light of IR data.     

Oxo(trisyl)boran (Me3Si)3C?BO als Zwischenstufe

Oxo(trisyl)borane (Me₃Si)₃C? B?O as an Intermediate The acyclic trisylboranes R? B(OSiMe₃)? Cl ( 4 a ) and R? B(OH)? H ( 5 a ) and the cyclic boranes (? RB? O? CO? CO? O? ) ( 1 a ) and (? RB? O? RB? O? SO₂? O? ) ( 6 a ) [R = (Me₃Si)₃C, “Trisyl”] are thermolyzed in the gasphase to give well-defined products. The tris(trisyl)boroxine (? RB? O? )₃ ( 2 a ) is formed from 4 a and 5 a at 140 and 160°C, respectively, besides Me₃SiCl and H₂, respectively, whereas the six-membered ring [? BMe? CH(SiMe₃)? SiMe₂? O? SiMe₂? CH₂? ] ( 8 ) is the product from 1 a and 6 a at 600 and 700°C, respectively, besides CO/CO₂ and SO₃, respectively. The oxoborane R? B?O is presumably a common intermediate. It is stabilized at the lower temperature by cyclotrimerization to give 2 and at the higher temperature by a sequence of several intramolecular steps: a 1,3-silyl shift along the chain C? B? O, an exchange of Me and Me₃SiO along the chain Si? C? B, and a C? H addition to the B?C double bond; the steps can be rationalized by analogous known reactions. The gas-phase thermolysis at 600°C of the dioxaboracyclohexenes (? BR? O? CR′ = CH? CRR′? O? ) ( 7 b? d ; R = Me, iPr, tBu; R′ = Me) yields the boroxines (RBO)₃ and the enones Me? CO? CH?CHR? Me; the cyclohexene 7 e (R = Me; R′ = CF₃) is not decomposed at 600°C.     

The effect of solvent accessible surface on Hammett‐type dependencies of infinite dilution 29Si and 13C NMR shifts in ring substituted silylated phenols dissolved in chloroform and acetone

Infinite dilution ²⁹Si and ¹³C NMR chemical shifts were determined from concentration dependencies of the shifts in dilute chloroform and acetone solutions of para substituted O‐silylated phenols, 4‐R‐C₆H₄‐O‐SiR′₂R″ (R = Me, MeO, H, F, Cl, NMe₂, NH₂, and CF₃), where the silyl part included groups of different sizes: dimethylsilyl (R′ = Me, R″ = H), trimethylsilyl (R′ = R″ = Me), tert‐butyldimethylsilyl (R′ = Me, R″ = CMe₃), and tert‐butyldiphenylsilyl (R′ = C₆H₅, R″ = CMe₃). Dependencies of silicon and C‐1 carbon chemical shifts on Hammett substituent constants are discussed. It is shown that the substituent sensitivity of these chemical shifts is reduced by association with chloroform, the reduction being proportional to the solvent accessible surface of the oxygen atom in the Si‐O‐C link. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of β‐monosubstituted α,β‐unsaturated amides with Z‐selectivity using diphenylphosphonoacetamides

The utility of diphenylphosphonoacetamides [(PhO)₂P(O)CH₂CONRR′] as Horner–Wadsworth–Emmons reagents was examined with five different patterns of substitution upon the amide nitrogen atom ( 2a : R, R′ = CH₂Ph; 2b : R = CH₂Ph, R′ = H; 2c : R = Me, R′ = OMe; 2d : R, R′ = Ph; 2e : R, R′ = (CH₂)₄). The reaction of 2a was found to be Z‐selective for aromatic aldehydes with selectivities up to 95:5. Reagent 2b led to reasonable selectivity for both benzaldehyde (85:15) and 3‐phenylpropionaldehyde (87:13), while 2c was somewhat effective for only the latter alkyl aldehyde (83:17). Compounds 2d and 2e exhibited slightly lower selectivities compared with 2a . © 2004 Wiley Periodicals, Inc. Heteroatom Chem 15:515–523, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20054     

Synthesis of N-[chloro(diorganyl)silyl]anilines

A series of N-[chloro(diorganyl)silyl]anilines RR′Si(NR″Ph)Cl (R, R′ = Me, Ph, CH₂=CH, ClCH₂, Cl(CH₂)₃; R″ = H, Me) was prepared via the reaction of diorganyldichlorosilanes with aniline or N-ethylaniline in the presence of triethylamine.     

The preparation and characterisation of a series of cationic bimetallic linear triphos-bridged complexes of the type [Mo (CO) (L,L′ or L″–P) (η2-RC2R′)Cp] [BF4] {L,L′ or L″= [WI2 (CO){PhP(CH2CH2PPh2)2–P,P′} (η2-RC2R′)] (L,R=R′=Me; L′,R=R′=Ph; L″,R=Me,R′=Ph}

Equimolar quantities of [Mo (CO) (η²-RC₂R′)₂Cp] [BF₄] (R=R′=Me Ph R=Me R′=Ph) and L L′ or L″ {L L′ or L″= [WI₂ (CO){PhP(CH₂CH₂PPh₂)₂-PP′} (η²-RC₂R′)]} (L R=R′=Me L′ R=R′=Ph L″ R=Me R′=Ph) react in CH₂Cl₂ at room temperature to give the new bimetallic complexes[Mo (CO) (L L′ or L″–P) (η²-RC₂R′)Cp] [BF₄] (1–9) via displacement of the alkyne ligand on the molybdenum centre The complexes have been characterised by elemental analysis IR and ¹ H NMR spectroscopy and in selected cases by ³¹ P NMR spectroscopy.     

Hindered Rotation in Some Organic Dithiocarbamates

Abstract

Hindered rotation in alkyldithiocarbamates of the type RR′NC(= S)SR″ [R, R′, R″ = Me, Me, Et (1); PhCH₂, Me, Et (2); PhCH₂, H, Et (3); PhCH₂, H, Me (4) and O(CH₂CH₂)₂, Et (5)′ has been investigated using variable-temperature ¹H NMR spectroscopy in CDCl₃, C₆D₆, and DMSO-d₆ solutions. Rotational parameters were calculated by the coalescence temperature method. Nitrogen substituent effects on the free energy of activation and on the equilibrium constant of unsymmetrical conformers at room temperature are discussed.     

Reaktionen von metall-koordiniertem kohlenmonoxid mit yliden: XVII. Darstellung eines molybdän- und wolframkomplexes mit η3-gebundenem trimethylsiloxybutenon-liganden durch silylierung der phosphonium-metall-enolat-vorstufe

The reaction of the phosphonium metallates Me₄P[C₅R₅(CO)(Me₃P)$\text{MC(O)=CHC(O}$)R′] (M = W, R = H, R′ = Et (1a); M = Mo, R = Me, R′ = Me (1b)) with the silylating reagent Me₃SiOSO₂CF₃ yields the neutral complexes C₅R₅(CO)(Me₃P)$\text{MC(OSiMe}{}_3\text{)=CHC(O}$)R (2a, 2b) bearing a chelating O(2), C(4)-trimethylsiloxybutenone ligand. The structure of the new compounds is established by the IR, ¹H and ³¹P NMR spectra.     

The synthesis and spectroscopic properties of some (π-allyl) dicarbonyl-semicarbazonatohalogenomolybdenum(II) complexes

Reaction of [MoX(CO₂(NCMe)₂(η³-C₃H₄R)] in CH₂Cl₂ at room temperature with an equimolar quantity of (R′R″)CNNHCONH₂ gave high yields of the bidentate coordinated semicarbazone complexes [MoX(CO)₂{(R′R″)CNNHCONH₂}(η³-C₃H₄R)] (X = Cl, Br or I; R = H or Me; R′,R″ = H or Me and Me, Et, ⁿPr or Ph) via displacement of two acetonitrile ligands.     

Darstellung,Eigenschaften und Reaktionsverhalten von 2-(Dimethylaminomethyl)phenyl- und 8-(Dimethylamino)naphthylsubstituierten Lithiumhydridosilylamiden – Bildung von Silaniminen durch Lithiumhydrideliminierung

Preparation, Properties, and Reaction Behaviour of 2-(Dimethylaminomethyl)phenyl- and 8-(Dimethylamino)naphthylsubstituted Lithium Hydridosilylamides – Formation of Silanimines by Elimination of Lithium Hydride The hydridosilylamines Ar(R)Si(H)–NHR′ ( 2 a : Ar = 2-Me₂NCH₂C₆H₄, R = Me, R′ = CMe₃; 2 b : Ar = 2-Me₂NCH₂C₆H₄, R = Ph, R′ = CMe₃; 2 c : Ar = 2-Me₂NCH₂C₆H₄, R = Me, R′ = SiMe₃; 2 d : Ar = 8-Me₂NC₁₀H₆, R = Me, R′ = CMe₃; 2 e : Ar = 8-Me₂NC₁₀H₆, R = Ph, R′ = CMe₃; 2 f : Ar = 8-Me₂NC₁₀H₆, R = Me, R′ = SiMe₃) have been synthesized from the appropriate chlorosilanes Ar(R)SiHCl either by reaction with the stoichiometric amount of Me₃CNHLi ( 2 a , 2 b , 2 d , 2 e ) or by coammonolysis in liquid NH₃ with chlorotrimethylsilane in molar ratio 1 : 3 ( 2 c , 2 f ). Treatment of 2 a–2 f with n-butyllithium in equimolar ratio in n-hexane resulted in the lithiumhydridosilylamides Ar(R)Si(H)–N(Li)R′ 3 a–3 f . The frequencies of the Si–H stretching vibration and ²⁹Si–¹H coupling constants in the amides are smaller than in the analogous amines indicating a higher hydride character for the hydrogen atom of the Si–H group in the amides compared to the amines. Results of NMR spectroscopic studies point to the existence of a (Me₂)N → Si coordination bond in the 8-(dimethylamino)naphthyl-substituted amines and amides. The amides 3 a–3 c are stable under refluxing in m-xylene. At the same conditions 3 d and 3 e eliminate LiH and the silanimines 8-Me₂NC₁₀H₆(R)Si=NCMe₃ ( 4 d : R = Me, 4 e : R = Ph) are formed. The amides 3 a–3 d und 3 f react with chlorotrimethylsilane in THF to give the corresponding N-substitution products Ar(R)Si(H)–N(SiMe₃)R′ 6 a–6 d and 6 f in good yields. 4 d is formed as a byproduct in the reaction of 3 d with chlorotrimethylsilane. In n-hexane and m-xylene these amides are little reactive opposite to chlorotrimethylsilane. 6 a–6 d and 6 f are obtained in very small amounts. In the case of 3 d besides the N-substitution product 6 d the silanimine 4 d is obtained. In contrast to chlorotrimethylsilane the amides 3 a and 3 f react well with chlorodimethylsilane in m-xylene producing 2-Me₂NCH₂C₆H₄(H) SiMe–N(SiHMe₂)CMe₃ ( 7 a ) and 8-Me₂NC₁₀H₆(H)SiMe–N(SiHMe₂)SiMe₃ ( 7 f ).     

Reactions of 1,4-diaza-3-methylbutadien-2-ylpalladium(II) derivatives with chloro-bridged rhodium(I) complexes

The reactions of the organometallic 1,4-diazabutadienes, RN=C(R′)C(Me)=NR″ [R = R″ = p-C₆H₄OMe, R′ = trans-PdCl(PPh₃)₂ (DAB); R = p-C₆H₄OMe, R″ = Me, R′ = trans-PdCl(PPh₃)₂ (DAB^I; R = R″ = p-C₆H₄OMe, R′ = Pd(dmtc)-(PPh₃), dmtc = dimethyldithiocarbamate (DAB^II); R = R″ = p-C₆H₄OMe, R′ = PdCl(diphos), diphos = 1,2-bis(diphenylphosphino)ethane (DAB^III)] with [RhCl(COD)]₂ (COD = 1,5-cyclooctadiene, Pd/Rh ratio = $\text{1}\text{2}$) depend on the nature of the ancillary ligands at the Pd atom in group R′. In the reactions with DAB and DAB^I transfer of one PPh₃ ligand from Pd to Rh occurs yielding [RhCl(COD)(PPh₃)] and the new binuclear complexes [Rh(COD) {RN=C(R?)-C(Me)=NR″}], in which the diazabutadiene moiety acts as a chelating bidentate ligand. Exchange of ligands between the two different metallic centers also occurs in the reaction with DAB^II. In this case, the migration of the bidentate dmtc anion yields [Rh(COD)Pdmtc] and [Rh(COD) {RN=C(R?)C(Me)=NR″}]. In contrast, the reaction with DAB^III leads to the ionic product [Rh(COD)- (DAB^III)][RhCl₂(COD)], with no transfer of ligands. The cationic complex [Rh(COD)(DAB^III)]⁺ can be isolated as the perchlorate salt from the same reaction (Pd/Rh ratio = 1/1) in the presence of an excess of NaClO₄. In all the binuclear complexes the coordinated 1,5-cyclooctadiene can be readily displaced by carbon monoxide to give the corresponding dicarbonyl derivatives. The reaction of [RhCl(CO)₂]₂ with DAB and/or DAB^I yields trinuclear complexes of the type [RhCl(CO)₂]₂(DAB), in which the diazabutadiene group acts as a bridging bidentate ligand. Some reactions of the organic diazabutadiene RN=C(Me)C(Me)=NR (R = p-C₆H₄OMe) are also reported for comparison.     

Rhenium-Komplexe von Sauerstoffchelatliganden: Ein Weg zu neuen Radiopharmaka?

Rhenium Complexes Stabilized by Tris-chelating Oxygen Ligands: Potential New Radiopharmaca? Ris-chelating oxygen ligands of the general formula L^? = [(C₅H₄R)Co{P(O)R′R″}₃]^? (R = COOCH₃, COOH and R′ = OCH₃; R = H and R′ = O(CH₂)₅COOCH₃, O(CH₂)₅COOH; R″ = OCH₃) have been synthesized. These ligands L^? and others of the same type have been used to prepare the rhenium oxo complexes [LReO₃] and [LReOX₂] (X = Cl, Br, I). In order to judge their use in radioimmunotherapy the corresponding complexes containing radioactive rhenium isotopes have also been synthesized. The rhenium(VII) as well as the diamagnetic rhenium(V) complexes are stable in air in the solid state as well as in organic solvents. They hydrolyze slowly in water to yield perrhenic acid. The X-ray structures of the sodium salt Na[(C₅H₄COOCH₃)Co{P(O)(OCH₃)₂}₃] and of the rhenium complex [LReOBr₂] (R = H, R′ = R″ = OCH₃) have been determined. The sodium salt crystallizes in trimeric units with the composition [(NaL)₃ · 3 H₂O]. Each sodium has a distorted octahedral oxygen coordination. In [LReOBr₂] the ReO₄Br₂ octahedron is only slightly distorted.     

The Haloboration of Tri‐tert‐butylazadiboriridine NB2R3: Ring Opening versus NB3 Cluster Formation

The azadiboriridine [–BR–NR–BR–] ( 1 ; R = tBu) is bromoborated at the B–B bond by alkyldibromoboranes R′BBr₂ to give the products Br–BR–NR=BR–BR′–Br ( 8 a – g : R′ = Me, Bu, iBu, Bzl, CH₂CHEt₂, CH₂Cy, CH₂(4‐C₆H₄tBu)). Two isomers of each of the products 8 a – g are formed and attributed to a cis/trans isomerism at the BN double bond; the isomerization is followed thermodynamically and kinetically by NMR methods with 8 a – d . The analogous chloroboration of 1 with BCl₃ yields Cl–BR–NR=BR–BCl₂ ( 8 h ), which at ambient temperature undergoes a degenerate exchange of the ligands Cl and BCl₂ along the B–N–B skeleton. At room temperature, the isomer Cl–BR–NR=BCl–BR–Cl ( 8 h ′) is slowly formed by an irreversible exchange of R and Cl along the B–B bond of 8 h . Different from BCl₃, the chloroborane BH₂Cl is simply added to the B–B bond of 1 under formation of the aza‐nido‐tetraborane NB₃R₃H₂Cl ( 2 b ). The chloroborane BHCl₂ gives a mixture of 8 h ′ and 2 b upon addition to 1 , apparently according to a preceding dismutation into BCl₃ and BH₂Cl. The configuration at the B3 atom of the nido‐clusters NB₃R₃H₂X (X = H, Cl) is discussed on the basis of the corresponding model molecules NB₃Me₃H₂X, whose structure and NMR signals are computed by the B3LYP method. The boranes 8 b – g can be debrominated with Li in the presence of tmen on applying ultrasound. The products are found to be the B‐borylated azadiboriridines [–BR–NR–B(BRR′)–] ( 9 b – g ). The 2‐borylazadiboriridines NB₃H₄ ( 9 h ) and NB₃Me₄ ( 9 i ) were found as local minima on the energy hyperface by the B3LYP method, but minima for structural isomers with lower energy were also found; the tetrahedral clusters NB₃R₄ give high‐energy minima with triplet ground states. Computations of the ¹¹B NMR shifts of 9 h and 9 i support the proposed structures of 9 b – g .     

Synthese und Reaktivität von Silicium-übergangsmetall-Komplexen: XXI. Ferrio-azidosilane and Ferriosilyl-iminophosphorane

Reaction of the ferriochlorosilanes R₅C₅(CO)₂FeSiR′_3-nCl_n (1a–1f) with sodium azide in tetrahydrofuran yields the ferrio- (mono-, bis-, and tris-azido)silanes R₅C₅(CO)₂FeSiR′_3-n(N₃)_n (R = H, Me; R′ = Me, H; n = 1–3) (2a–2f). CCl₄ converts Cp(CO)₂FeSiMe(H)N₃ (2a) into the ferrioazido(chloro)silane Cp(CO)₂-FeSiMe(Cl)N₃ (3). Treatment of 2d, 2f with Me₃P results in the formation of the ferriosilyl-iminophosphoranes Cp(CO)₂FeSi(N₃)(R)NPMe₃ (R = Me, N₃), (4a, 4b) by N₂ elimination.     

Acyl iodides in organic synthesis: X. Reactions with triorganylsilanes and triphenylgermane

Reaction of acyl iodides RCOI (R = Me, Ph) with triorganylsilanes R′₂R″SiH in toluene gives 50–60% of the corresponding triorganyliodosilanes R′₂R″SiI. Triethylsilane reacts with the same acyl iodides under solvent-free conditions to afford the corresponding aldehyde and triethyliodosilane as primary products. Triethyliodosilane undergoes subsequent transformations into hexaethyldisiloxane and triethyl(acyloxy)silane Et₃SiOCOR (R = Me, Ph). Reactions of acyl iodides RCOI (R = Me, Ph) with triphenylgermane in the absence of a solvent lead to formation of iodo(triphenyl)germane in more than 90% yield.     

Zur reaktion von metall-koordiniertem kohlenmonoxid mit yliden: XI. Einige neuartige η1-vinyl-komplexe des eisens durch deprotonierung kationischer carbenkomplexe mit trimethyl(methylen)phosphoran

Novel η¹-vinyl complexes of the type Cp(CO)(L)FeC(OMe)C(R)R′ (R = R′ = H, Me; R = H, R′ = Me; L = Me₃P, Ph₃P) are obtainied via methylation of the acyl complexes Cp(CO)(L)FeC(O)R (R = Me, Et, i-Pr) with MeOSO₂F and subsequent deprotonation of the resulting carbene complexes [Cp(CO)(L)FeC(OMe)R]SO₃F with the phosphorus ylide Me₃PCH₂. The same procedure can be applied for the synthesis of the pentamethylcyclopentadienyl derivative C₅Me₅(CO)(Me₃P)FeC(OMe)CH₂, while treatment of the hydroxy or siloxy carbene complexes [Cp(CO)(L)FeC(OR)Me]X (R = H, Me₃Si; X = SO₃CF₃) with Me₃CH₂ results in the transfer of the oxygen bound electrophile to the ylidic carbon. Some remarkable spectroscopic properties of the new complexes are reported.     

Selektive Darstellung zweifach diorganophosphido-verbrückter Metallatetrahedrane [Re2(MPR3)2(μ-PR2)2(CO)6] mit Re2M2-Metallgerüst (M = Au,Ag)

Selective Preparation of Twofold Diorganophosphido-bridged Metallatetrahedranes [Re₂(MPR₃)₂(μ-PR₂)₂(CO)₆] with Re₂M₂ Metal Core (M = Au, Ag) The reaction of the in situ prepared salt Li[Re₂(AuPR)(μ-PR₂)(CO)₇Cl] (R = R′ = Cy ( 1 a ), R = Cy, R′ = Ph ( 1 b ), R = Ph, R′ = Cy ( 1 c ), R = Ph, R′ = Et ( 1 d ), R = Ph, R′ = Ph ( 1 e )) with one equivalent HPR in methanolic solution at room temperature yields the neutral cluster complexes [Re₂(AuPR)(μ-PR₂)(CO)₇(ax-HPR) (R = R′ = R″ = Cy ( 2 a ), Ph ( 2 b ), R = R′ = Cy, R″ = Et ( 2 c ), R = Cy, R′ = R″ = Ph ( 2 d ), R = Cy, R′ = Ph, R″ = Et ( 2 e ), R = R″ = Ph, R′ = Et ( 2 f ), R = Ph, R′ = Cy, R″ = Et (2 g)). Photochemically induced these complexes react in the presence of the organic base DBU in THF solution to give the doubly phosphido bridged anions Li[Re₂(AuPR)(μ-PR₂)(μ-PR)(CO)₆], which were characterized as salts PPh₄[Re₂(AuPR)(μ-PR₂)(μ-PR)(CO)₆] (R = R′ = R″ = Ph ( 3 a ), R = R′ = Ph, R″ = Cy ( 3 b ), R = Ph, R′ = Cy, R″ = Et ( 3 c ), R = R″ = Ph, R′ = Et ( 3 d )). These precursor complexes 3 then react with one equivalent of ClMPR (M = Au, Ag) to doubly phosphido bridged metallatetrahedranes [Re₂(MPR₃)₂(μ-PR₂)(μ-PR)(CO)₆] (M = Au, R = R′ = R″ = Ph ( 4 a ), M = Au, R′ = Et, R = R″ = Ph ( 4 b ), M = Au, R = R′ = Ph, R″ = Cy ( 4 c ), M = Au, R = Cy, R′ = Ph, R″ = Et ( 4 d ), M = Ag, R = R′ = R″ = Ph ( 4 e )). All isolated cluster complexes were characterized and identified by the following analytical methods: NMR- (¹H, ³¹P) and ν(CO) IR-spectroscopy and, additionally, complexes 2 b , 4 a and 4 e by X-ray structure analysis.