Regioselektive Ringöffnungen von einfach ungesättigten triangularen Clusterkomplexen [M2Rh(μ‐PR2)(μ‐CO)2(CO)8] (M2 = Re2, Mn2; R = Cy,Ph; M2 = MnRe,R = Ph) mit Diphosphanen

Regioselective Ring Opening Reactions of Unifold Unsaturated Triangular Cluster Complexes [M₂Rh(μ‐PR₂)(μ‐CO)₂(CO)₈] (M₂ = Re₂, Mn₂; R = Cy, Ph; M₂ = MnRe, R = Ph) with Diphosphanes Equimolar amounts of the triangular title compounds and chelates of the type (Ph₂P)₂Z (Z = CH₂, DPPM ; C=CH₂, EPP ) react in thf solution at –40 to –20 °C under release of the labile terminal carbonyl ligand attached to the rhodium atom in good yields (70–90%) to ring‐opened unifold unsaturated complexes [MRh(μ‐PR₂)(CO)₄M(DPPM bzw. EPP)(μ‐CO)₂(CO)₃] (DPPM: M₂ = Re₂, R = Cy 1 , Ph 2 ; Mn₂, Cy 5 , Ph 6 ; MnRe, Cy 7 . EPP: M₂ = Re₂, R = Cy 8 ; Mn₂, Cy 10 ). Complexes 1 , 2 and 8 react subsequently under minor uptake of carbon monoxide and formation of the valence saturated complexes [ReRh(μ‐PR₂)(CO)₄M(DPPM bzw. EPP) (CO)₆] (DPPM: R = Cy 3 , Ph 4 . EPP: R = Cy 9 ). Separate experiments ascertained that the regioselective ring opening at the M–M‐edge of the title compounds is limited to reactions with diphosphanes chelates with only one chain member and that the preparation of the unsaturated complexes demands relatively good donor ability of both P atoms. As examples for both types of compounds the molecular structures of 8 and 3 have been determined from single crystal X‐ray structure analysis. Additionally all new compounds are identified by means of ν(CO)IR, ¹H‐ and ³¹P‐NMR data. This includes complexes with a modified chain member in 1 and 5 which, after deprotonation reaction to carbanionic intermediates, could be trapped with [PPh₃Au]⁺ cations as rac‐[MRh(μ‐PR₂)(CO)₄M((Ph₂P)₂CHAuPPh₃)(μ‐CO)₂(CO)₃] (M₂ = Re 17 , Mn 18 ) and products rac‐[MRh(μ‐PR₂)(CO)₄M((Ph₂P)₂CHCH₂R)(μ‐CO)₂(CO)₃] (M₂ = Re, R = Ph 19 , n‐Bu 21 , Me 23 ; Mn, Ph 20 , n‐Bu 22 , Me 24 ) which result from Michael‐type addition reactions of 8 or 10 with strong nucleophiles LiR.     

An Azelaato‐bridged Dinuclear Copper(II) Complex, [Cu2(phen)2(C9H14O4)2] · 6 H2O (phen = 1,10‐phenanthroline)

The title compound [Cu₂(phen)₂(C₉H₁₄O₄)₂] · 6 H₂O was prepared by the reaction of CuCl₂ · 2 H₂O, 1,10‐phenanthroline (phen), azelaic acid and Na₂CO₃ in a CH₃OH/H₂O solution. The crystal structure (monoclinic, C2/c (no. 15), a = 22.346(3), b = 11.862(1), c = 17.989(3) Å, β = 91.71(1)°, Z = 4, R = 0.0473, wR² = 0.1344 for 4279 observed reflections) consists of centrosymmetric dinuclear [Cu₂(phen)₂(C₉H₁₄O₄)₂] complexes and hydrogen bonded H₂O molecules. The Cu atom is square‐planar coordinated by the two N atoms of the chelating phen ligand and two O atoms of different bidentate bridging azelaate groups with d(Cu–N) = 2.053, 2.122(2) Å and d(Cu–O) = 1.948(2), 2.031(2) Å. Two azelaate anions bridge two common Cu atoms via the terminal O atoms (d(C–O) = 1.29(2) Å; d(C–C) = 1.550(4)–1.583(4) Å). Phen ligands of adjacent complexes cover each other at distances of about 3.62 Å, indicating π‐π stacking interaction, by which the complexes are linked to 1 D bands.     

Properties of the Magnesium(II) and Calcium(II) Complexes of 5‐ and 6‐Uracilmethylphosphonate (5 Umpa2– and 6 Umpa2–) in Aqueous Solution

The stability constants of the 1 : 1 complexes formed between Mg²⁺ or Ca²⁺ and 5 Umpa^2– or 6 Umpa^2– were determined by potentiometric pH titrations in aqueous solution (25 °C; I = 0.1 M, NaNO₃). Based on previously established log K^M_M(R‐PO3) versus pK^H_H(R‐PO3) straight‐line plots (M²⁺ = Mg²⁺ or Ca²⁺; R‐PO₃^2– = simple phosphate monoester or phosphonate ligands where R is a non‐interacting residue), it is shown that the Mg(5 Umpa), Ca(5 Umpa), Mg(6 Umpa) and Ca(6 Umpa) complexes have the stability expected on the basis of the basicity of the phosphonate group in 5 Umpa^2– and 6 Umpa^2–. This means, these ligands may be considered as simple analogues of nucleotides, e. g. of uridine 5′‐monophosphate. In the higher pH range deprotonation of the uracil residue in the M(5 Umpa) and M(6 Umpa) complexes occurs and this leads to the negatively charged M(5 Umpa–H)^– and M(6 Umpa–H)^– species. Based on the comparison of various acidity constants it is shown that the M(5 Umpa) complexes are especially acidic; or to say it differently, the M(5 Umpa–H)^– species are especially stable. This increased stability is attributed to the formation of a seven‐membered chelate involving next to the phosphonate group also the carbonyl oxygen atom at C4 (after deprotonation of the (N3)H site). The formation degree of this chelated isomer reaches about 45% for the Mg(5 Umpa–H)^– and Ca(5 Umpa–H)^– species. No indication for chelate formation was observed for the M(6 Umpa–H)^– complexes.     

Mononuclear Carbene Dithiolate [Ni(NHX)(′S2C ′)] Complexes with HNX = HNPiPr3 or HNSPh2 Coligands (′S2C ′ 2– = 1,3‐ImidazolidinylN,N′‐bis(2‐benzenethiolate)(2–))

Cleavage reactions of the dinuclear [{Ni(′S₂C ′)}₂] · DMF (′S₂C ′ ^2– = 1,3‐imidazolidinyl‐N,N′‐bis(2‐benzenethiolate)(2–)) with HNPiPr₃ or HNSPh₂ yielded the mononuclear complexes [Ni(NHPiPr₃)(′S₂C ′)] ( 1 ) and [Ni(NHSPh₂)(′S₂C ′)] ( 2 ) which have been completely characterized. The nickel‐carbene‐dithiolate [Ni(′S₂C ′)] moiety is one of the very rare complex fragments that are able to coordinate both HNPR₃ or HNSR₂. IR spectra and X‐ray structure determinations show that 1 and 2 exhibit intramolecular N–H…S(thiolate) hydrogen bonds. Geometric parameters and NMR spectroscopic data of 1 and 2 are compatible with N–X single bonds and ylidic structures of the HNPiPr₃ and HNSPh₂ ligands. Comparison of Ni–N distances in diamagnetic and paramagnetic [Ni(NHSPh₂)] complexes was rendered possible through the X‐ray structure determination of the homoleptic [Ni(NHSPh₂)₆]Cl₂ ( 3 ) which formed as minor by‐product in the synthesis of 2 .     

Synthesis and Crystal Structure of Manganese(II) Bipyridine Carboxylato Complexes: [(bipy)2MnII(μ‐C2H5CO2)2MnII(bipy)2](ClO4)2 and [MnII(ClCH2CO2)(H2O)(bipy)2]ClO4 · H2O (bipy = 2,2′‐bipyridine)

Two manganese(II) bipyridine carboxylate complexes, [(bipy)₂Mn^II(μ‐C₂H₅CO₂)₂Mn^II(bipy)₂}₂](ClO₄)₂ ( 1 ), and [Mn^II(ClCH₂CO₂)(H₂O)(bipy)₂]ClO₄ · H₂O ( 2 ) were prepared. 1 crystallizes in the triclinic space group P 1 with a = 8.604(3), b = 12.062(3), c = 13.471(3) Å, α = 112.47(2), β = 93.86(2), γ = 92.87(3)°, V = 1211.1(6) ų and Z = 1. In the dimeric, cationic complex with a crystallographic center of symmetry two 2,2′‐bipyridine molecules chelate each manganese atom. These two metal fragments are then bridged by two propionato groups in a syn‐anti conformation. The Mn…Mn distance is 4.653 Å. 2 crystallizes in the monoclinic space group P2₁/c with a = 9.042(1), b = 13.891(1), c = 21.022(3) Å, β = 102.00(1)°, V = 2569.3(5) ų and Z = 4. 2  is a monomeric cationic complex in which two bipyridine ligands chelate the manganese atom in a cis fashion. A chloroacetato and an aqua ligand complete the six‐coordination. Only in 2 is the intermolecular packing controlled by weak π‐stacking besides C–H…π contacts between the bipyridine ligands.     

Syntheses,Structures, and Properties of the Complexes [Ag(N∧S)n](X), N∧S = 1‐Methyl‐2‐(alkylthiomethyl)‐1H‐benzimidazoles,X = PF6 (n = 2) or PO2F2 (n = 1)

The complexes [Ag(η²‐N∧S)₂](PF₆), N∧S = 1‐methyl‐2‐(methylthiomethyl)‐1H‐benzimidazole, mmb (complex 1 ) or 1‐methyl‐2‐(tert‐butylthiomethyl)‐1H‐benzimidazole, mtb (complex 2 ), and [Ag(μ,η²‐mmb)(μ,η²‐O₂PF₂)] (complex 3 ) were synthesized and characterized by X‐ray crystallography. Long Ag–S (ca. 2.70 Å) and shorter Ag–N bonds (ca. 2.23 Å) are part of characteristically distorted tetrahedral coordination arrangements at the silver(I) ions in 1 and 2 . Unexpectedly, the comparison with the copper analogue [Cu(η²‐mmb)₂](PF₆) reveals a more tetrahedral and less linear coordination arrangement for the corresponding silver species. Compound 3 as obtained by hydrolysis of the PF₆ ion or by the use of AgPO₂F₂ exhibits bridging mmb and η²‐difluorophosphate ligands in a chain‐type structure.     

Similar Coordination – Different Dimensionality: Synthesis,Single Crystal Structures,and Theoretical Studies of Hydrogen‐bonded {[Ca(H2O)2L4]I2}n/∞ (1: L = CH3COOC2H5, n = 1; 2: L = OC4H8, n = 2)

CaI₂(H₂O)₂ reacts with O‐donor ligands L to yield coordination compounds of the type {[Ca(H₂O)₂L₄]I₂}_n/∞, ( 1 : L = CH₃COOC₂H₅, n = 1; 2 : L = THF, n = 2). Both compounds feature a coordination number of six around the calcium atom with two water molecules in axial positions and four ligands L in equatorial positions of a tetragonal bipyramid. Due to only a slight variation in the arrangement of the cationic units [Ca(H₂O)₂L₄]²⁺, hydrogen bonds can be built up between them and the iodide anions in different ways in order to lead to a one‐dimensional polymer for 1 and a two‐dimensional polymer for 2 . Density functional theory calculations provide useful informations on the involved orbitals on the μ₂‐bridging iodide and on the structure of the systems, leading to a small H–I–H angle of 71.2° in 1 compared to a large H–I–H angle of 121.8° in 2 .     

Synthese,Struktur und Eigenschaften von [nacnac]MX3‐Verbindungen (M = Ge,Sn; X = Cl,Br, I)

Synthesis, Structure, and Properties of [nacnac]MX₃ Compounds (M = Ge, Sn; X = Cl, Br, I) Reactions of [nacnac]Li [(2,6‐ⁱPr₂C₆H₃)NC(Me)C(H)C(Me)N(2,6‐ⁱPr₂C₆H₃)]Li ( 1 ) with SnX₄ (X = Cl, Br, I) and GeCl₄ in Et₂O resulted in metallacyclic compounds with different structural moieties. In the [nacnac]SnX₃ compounds (X = Cl 2 , Br 3 , I 4 ) the tin atom is five coordinated and part of a six‐membered ring. The Sn–N‐bond length of 3 is 2.163(4) Å and 2.176(5) Å of 4 . The five coordinated germanium of the [nacnac]GeCl₃ compound 5 shows in addition to the three chlorine atoms further bonds to a carbon and to a nitrogen atom. In contrast to the known compounds with the [nacnac] ligand the afore mentioned reaction creates a carbon–metal‐bond (1.971(3) Å) forming a four‐membered ring. The Ge–N bond length (2.419(2) Å) indicates the formation of a weakly coordinating bond.     

Clusterkomplexe [M2Rh(μ‐PCy2)(μ‐CO)2(CO)8] mit triangularem Metallgerüst RhM2 (M = Mn,Re; M2 = MnRe): Synthese,Struktur, Ringöffnungen und Katalysatoreigenschaften für die Isomerisierung und Hydroformylierung von 1‐Hexen

Cluster Complexes [M₂Rh(μ‐PCy₂)(μ‐CO)₂(CO)₈] with Triangular Core of RhM₂ (M = Re, Mn; M₂ = MnRe): Synthesis, Structure, Ring Opening Reaction, and Properties as Catalysts for Hydroformylation and Isomerisation of 1‐Hexene The salts PPh₄[M₂(μ‐H)(μ‐PCy₂)(CO)₈] and Rh(COD)[ClO₄] were in equimolar amounts reacted at –40 to –15 °C in the presence of CO_(g) in CH₂Cl₂/methanol solution under release of PPh₄[ClO₄] to intermediates. Such species formed in a selective reaction the unifold unsaturated 46 valence electrons title compounds [M₂Rh(μ‐PCy₂)(μ‐CO)₂(CO)₈] (M = Re 1 , Mn 2 ; M₂ = MnRe 3 ) in yields of > 90%; analogeous the derivatives with the PPh₂ bridge could the obtained (M = Re 4 , Mn 5 ). From these clusters the molecular structure of 2 was determined by a single crystal X‐ray analysis. The exchange of the labil CO ligand attached at the rhodium ring atom in 1 – 3 against selected tertiary and secondary phosphanes in solution gave the substitution products [M₂RhL(μ‐PCy₂)(μ‐CO)₂(CO)₇] (M = Re: L = PMe₃ 6 , P(n‐Bu)₃ 7 , P(n‐C₆H₄SO₃Na)₃ 8 , HPCy₂ 9 , HPPh₂ 10 , HPMen₂ 11 , M₂ = MnRe: L = HPCy₂ 12 ) nearly quantitative. Such dimanganese rhodium intermediates ligated with secondary phosphanes were converted in a subsequent reaction to the ring‐opened complexes [MnRh(μ‐PCy₂)(μ‐H)(CO)₅Mn(μ‐PR₂)(CO)₄] (M = Mn: R = Cy 13 , Ph 14 , Mn 15 ). The molecular structure of 13 , which showed in the time scale of the ³¹P NMR method a fluxional behaviour, was determined by X‐ray structure analysis. All products obtained were always characterized by means of υ(CO)Ir, ¹H and ³¹P NMR measurements. From the reactants of hydroformylation process, CO_(g) 1 – 2 in different solvents afforded at 20 °C under a reversible ring opening reaction the valence‐saturated complexes [MRh(μ‐PCy₂)(CO)₇M(CO)₅] (M = Re 16 , Mn 17 ), whereas the reaction of CO_(g) and the ring‐opened 13 to [MnRh(μ‐PCy₂)(μ‐H)(CO)₆Mn(μ‐PCy₂)(CO)₄] ( 18 ) was as well reversible. The molecular structures of 17 and 18 were determined by X‐ray analysis. The υ(CO)IR, ¹H and ³¹P NMR measurements in pressure‐resistant reaction vessels at 20 °C ascertained the heterolytic splitting of hydrogen in the reaction of 1 – 2 dissolved in CDCl₃ or THF‐d₈ under formation of product monoanions [M₂Rh(μ‐CO)(μ‐H)(μ‐PCy₂)(CO)₉]^– (M = Re, Mn), which also were formed by the reaction of NaBH₄ and 1 – 2 . Finally, the substrate 1‐hexene and 1 and 3 gave under the release of the labil CO ligand an η²‐coordination pattern of hexene, which was weekened going from the Re to the Mn neighbor atoms. After the results of the catalytic experiments with 1 and 2 as catalysts, such change in the bonding property revealed an advantageous formation of hydroformylation products for the dirhenium rhodium catalyst 1 and that of isomerisation products of hexene for the dimanganese rhodium catalyst 2 . Par example, 1 generated n‐heptanal/2‐methylhexanal in TOF values of 246 [h^–1] (n/iso = 3.4) and the c,t‐hexenes in that of 241 [h^–1]. Opposotite to this, 2 achieved such values of 55 [h^–1] (n/iso = 3.6) and 473 [h^–1]. A triphenylphosphane substitution product of 1 increased the activity of the hydroformylation reaction about 20%, accompanied by an only gradually improved selectivity. The hydrogenation products like alcohols and saturated hydrocarbons known from industrial hydroformylation processes were not observed. The metals manganese and rhenium bound at the rhodium reaction center showed a cooperative effect.     

Synthesis and crystal structure of a molybdenum complex of fullerene, [Mo(η 2–C60)(CO)2(dpphen)(dbf)·0.63CS2] (dpphen = 4,7-diphenyl-1,10-phenanthroline; dbf = dibutyl fumarate)

The molybdenum complex [Mo( ²-C₆₀)(CO)₂(dpphen)(dbf)] (1) [dpphen = 4,7-diphenyl-1,10-phenanthroline; dbf = dibutyl fumarate] has been prepared and structurally characterized by X-ray diffraction analysis. In the molecule of (1), the coordination geometry of the Mo atom is distorted octahedral with the phen (1,10-phenanthroline) group of dpphen and two CO groups in the equatorial plane. The Mo atom binds in an ²-fashion to the C—C bonds of C₆₀and dbf. The two C—C bonds are almost mutually orthogonal.     

On Bonding,Structure, and Stability of Ternary Hydrides A2MH2 (A = Li,Na; M = Pd,Pt)

Bonding, structure, and stability of solid A₂MH₂ with A = Li, Na; M = Pd, Pt were investigated with a relativistically corrected density-functional approach, which reliably describes the trends among these four compounds. In order to examine the influence of the ligands (A) and of the crystalline environment, calculations were also made for free A₂MH₂ molecules and MH₂^2– ions. The free MH₂^2– complex is held together by strong bonds between formally closed shell atomic units because of strong M-d,s hybridization. The M–H bonds are further stabilized by the alkali metal ion ligands and by the crystal surrounding. The crystal field expands the H–A distance and enhances the H–A polarity. Relativistic effects contribute to M–H bonding in the solid state. The experimentally determined bond lengths and their trends are in accordance with theory. Due to relativistic and lanthanide effects, the Pt–H bond length becomes nearly as short as the Pd–H one. The small Li ion causes a distortion of the Li₂PtH₂ crystal resulting in an even shorter Pt–H bond length. In the gas-phase, A₂PtH₂ is more stable against dissociation than A₂PdH₂. The stability of the solid compounds is strongly influenced by the cohesive energy of the metal M, and also by the nature of the alkali metal. The evaluated enthalpies of formation favor increasing stability of solid A₂MH₂ against disproportionation into M and AH from Pt to Pd and from Li to Na. This is in agreement with experimental findings. The assignment of the experimental vibrational excitations should be reconsidered.     

Vierkernige Clusterkomplexe vom Typ [MM′(AuPR3)2(μ‐H)(μ‐PCy2)(μ4‐PCy)(CO)6] (M,M′ = Mn,Re; R = Ph,Cy, Et): Synthese,Struktur und Topomerisierung

Tetranuclear Cluster Complexes of the Type [MM′(AuR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (M,M′ = Mn, Re; R = Ph, Cy, Et): Synthesis, Structure, and Topomerisation The dirhenium complex [Re₂(μ‐H)(μ‐PCy₂)(CO)₇(ax‐H₂PCy)] ( 1 ) reacts at room temperature in thf solution with each two equivalents of the base DBU and of ClAuPR₃ (R = Ph, Cy, Et) in a photochemical reaction process to afford the tetranuclear clusters [Re₂(AuPR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (R = Ph ( 2 ), Cy ( 3 ), Et ( 4 )) in yields of 35–48%. The homologue [Mn₂(μ‐H)(μ‐PCy₂)(CO)₇(ax‐H₂PCy)] ( 5 ) leads under the same reaction conditions to the corresponding products [Mn₂(AuPR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (R = Ph ( 6 ), Et ( 8 )). Also [MnRe(μ‐H)(μ‐PCy₂)(CO)₇(ax/eq‐H₂PCy)] ( 9 ) reacts under formation of [MnRe(AuPR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (R = Ph ( 10 ), Et ( 11 )). All new cluster complexes were identified by means of ¹H‐NMR, ³¹P‐NMR and ν(CO)‐IR spectroscopic measurements. 2 , 4 and 10 have also been characterized by single crystal X‐ray structure analyses with crystal parameters: 2 triclinic, space group P 1, a = 12.256(4) Å, b = 12.326(4) Å, c = 24.200(6) Å, α = 83.77(2)°, β = 78.43(2)°, γ = 68.76(2)°, Z = 2; 4 monoclinic, space group C2/c, a = 12.851(3) Å, b = 18.369(3) Å, c = 40.966(8) Å, β = 94.22(1)°, Z = 8; 10 triclinic, space group P 1, a = 12.083(1) Å, b = 12.185(2) Å, c = 24.017(6) Å, α = 83.49(29)°, β = 78.54(2)°, γ = 69.15(2)°, Z = 2. The trapezoid arrangement of the metal atoms in 2 and 4 show in the solid structure trans‐positioned an open and a closed Re…Au edge. In solution these edges are equivalent and, on the ³¹P NMR time scale, represent two fluxional Re–Au bonds in the course of a topomerization process. Corresponding dynamic properties were observed for the dimanganese compounds 6 and 8 but not for the related MnRe clusters 10 and 11 . 2 and 4 are the first examples of cluster compounds with a permanent Re–Au bond valence isomerization.     

Syntheses,and Crystal Structures of Indium Complexes with η2‐Piperidinyldithiocarbamate and η2‐Pyridine‐2‐Thionate Containing Ligands: Structures of [In(η2‐S2CNC5H10)3] and [In(η2‐pyS)3]

The η²‐thio‐indium complexes [In(η²‐thio)₃] (thio = S₂CNC₅H₁₀, 2 ; SNC₄H₄, (pyridine‐2‐thionate, pyS, 3 ) and [In(η²‐pyS)₂(η²‐acac)], 4 , (acac: acetylacetonate) are prepared by reacting the tris(η²‐acac)indium complex [In(η²‐acac)₃], 1 with HS₂CNC₅H₁₀, pySH, and pySH with ratios of 1:3, 1:3, and 1:2 in dichloromethane at room temperature, respectively. All of these complexes are identified by spectroscopic methods and complexes 2 and 3 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 : space group, C2/c with a = 13.5489(8) Å, b = 12.1821(7) Å, c = 16.0893(10) Å, β = 101.654(1)°, V = 2600.9(3) ų, and Z = 4. The structure was refined to R = 0.033 and Rw = 0.086; Crystal data for 3 : space group, P2₁ with a = 8.8064 (6) Å, b = 11.7047 (8) Å, c = 9.4046 (7) Å, β = 114.78 (1)°, V = 880.13(11) ų, and Z = 2. The structure was refined to R = 0.030 and Rw = 0.061. The geometry around the metal atom of the two complexes is a trigonal prismatic coordination. The piperidinyldithiocarbamate and pyridine‐2‐thionate ligands, respectively, coordinate to the indium metal center through the two sulfur atoms and one sulfur and one nitrogen atoms, respectively. The short C‐N bond length in the range of 1.322(4)–1.381(6) Å in 2 and C‐S bond length in the range of 1.715(2)–1.753(6) Å in 2 and 3 , respectively, indicate considerable partial double bond character.     

Zur Darstellung phosphido‐chalkogenido‐verbrückter Dirheniumkomplexe vom Typ Re2(μ‐PCy2)(μ‐ER)(CO)8 (E = S,Se, Te; R = org. Rest)

Synthesis of Phosphido Chalcogenido Bridged Dirhenium Complexes of the Type Re₂(μ‐PCy₂)(μ‐ER)(CO)₈ (E = S, Se, Te; R = org. Residue) The reaction of Re₂(μ‐Br)(μ‐PCy₂)(CO)₈ with nucleophiles MER (M = Na, Li; E = S, Se, Te; R = org. residue) gives via substitution of the bromido bridge phosphido chalcogenido bridged dirhenium complexes of the general formula Re₂(μ‐PCy₂)(μ‐ER)(CO)₈. The new compounds were characterized by IR, ¹H and ¹³C NMR spectroscopic data and by elemental analyses. In addition the molecular structures for E = S, Se, Te and R = Ph as well as for E = S and R = H, n‐Bu, 2‐pyridyl have been established by single crystal X‐ray analysis. ¹³C NMR spectra of Re₂(μ‐PCy₂)(μ‐EPh)(CO)₈ (E = S, Se, Te) prove that the sulfur and selenium compounds are at room temperature dynamic molecules due to inversion of the pyramidal chalcogenido bridge. The tellurium compound, however, is rigid on the time scale of ¹³C NMR spectroscopy. Eventually the reactivity of the SH function of the novel complex Re₂(μ‐PCy₂)(μ‐SH)(CO)₈ was investigated by reaction with Re₂(CO)₈(MeCN)₂. In toluene at 90 °C the novel spirocyclic complex Re₂(μ‐PCy₂)(CO)₈(μ₄‐S)Re₂(μ‐H)(CO)₈ was formed by SH oxidative addition.     

Heterokuban‐Cluster‐Verbindungen (NEt4){Y=M[(μ3‐S)Re(CO)3]3(μ3‐E)} (M = W oder Mo,Y = O oder S,E = S oder Se): Strukturen,Spektroskopie und Elektrochemie

Heterocubane Cluster Compounds (NEt₄){Y=M[(μ₃‐S)Re(CO)₃]₃(μ₃‐E)} (M = W or Mo, Y = O or S, E = S or Se): Structures, Spectroscopy, and Electrochemistry Thiometallates [MS₄]^2– (M = Mo, W) or [WOS₃]^2– react with Re(CO)₅(O₃SCF₃) and Li₂E (E = S or Se) to yield the following compounds which were structurally characterized: (NEt₄){S=W[(μ₃‐S)Re(CO)₃]₃(μ₃‐S)}(NEt₄) ( 1 ), (NEt₄){O/S=W[(μ₃‐S)Re(CO)₃](μ₃‐S)}(NEt₄) ( 1 / 2 ), (mixed crystals), (NEt₄){S=W[(μ₃‐S)Re(CO)₃]₃(μ₃‐Se)}(NEt₄) ( 3 ) and (NEt₄){S=Mo[(μ₃‐S)Re(CO)₃]₃(μ₃‐S)}(NEt₄) ( 4 ). The heterocubane anions 1 – 4 contain electron‐rich centers such as rhenium(I) or sulfide whereas molybdenum(VI) or tungsten(VI) act as acceptor sites. Accordingly, the absorption spectra show long‐wavelength metal‐to‐ligand charge transfer transitions, and cyclic voltammetry reveals a quasi‐reversible reduction of the clusters. Although both six‐coordinate rhenium(I) and four‐coordinate metal(VI) centers are present in the clusters there is no evidence for significant metal‐to‐metal charge transfer interaction.     

Zweidimensionale Polymere mit hydrophober Umhüllung: Kristallstrukturen der isostrukturellen Metallkomplexe [M{C6H4(SO2)2N}(H2O)] (M = K,Rb) und des strukturverwandten Ammoniumsalzes [(NH4){C6H4(SO2)2N}(H2O)]

Metal Salts of Benzene‐1,2‐di(sulfonyl)amine. 4. Hydrophobically Wrapped Two‐Dimensional Polymers: Crystal Structures of the Isostructural Metal Complexes [M{C₆H₄(SO₂)₂N}(H₂O)] (M = K, Rb) and of the Structurally Related Ammonium Salt [(NH₄){C₆H₄(SO₂)₂N}(H₂O)] The previously unreported compounds KZ · H₂O ( 1 ), RbZ · H₂O ( 2 ) and NH₄Z · H₂O ( 3 ), where Z^– is Ndeprotonated ortho‐benzenedisulfonimide, are examples of layered inorgano‐organic solids, in which the inorganic component is comprised of metal or ammonium cations, N(SO₂)₂ groups and water molecules and the outer regions are formed by the planar benzo rings of the anions. The metal complexes 1 and 2 were found to be strictly isostructural, whereas 3 is structurally related to them by a non‐crystallographic mirror plane ( 1 – 3 : monoclinic, space group P2₁/c, Z = 4; single crystal X‐ray diffraction at low temperatures). In each structure, the five‐membered 1,3,2‐dithiazolide heterocycle possesses an envelope conformation, the N atom lying about 40 pm outside the mean plane of the S–C–C–S moiety. The metal complexes feature two‐dimensional coordination networks interwoven with O–H…O hydrogen bonds originating from the water molecules. The metal centres adopt an irregular nonacoordination formed by five sulfonyl O atoms, two N atoms and two μ₂‐bridging water molecules; each M⁺ is connected to four different anions. When NH₄⁺ is substituted for M⁺, the metal–ligand bonds are replaced by N⁺–H…O hydrogen bonds, but the general topology of the lamella is not affected. In the three structures, the lipophilic benzo groups protrude obliquely from the surfaces of the polar lamellae and display marked interlocking between adjacent layers.     

Destruktive Komplexierung des dimeren Diorganylzinn(IV)‐hydroxids [Me2Sn(A)(μ‐OH)]2 (HA = Benzol‐1,2‐disulfonsäureimid): Bildung und Strukturen der Einkernkomplexe [Me2Sn(A)2(OPPh3)2] und [Me2Sn(phen)2]2⊕ · 2 A⊖ · MeCN

Polysulfonylamines. CXVI. Destructive Complexation of the Dimeric Diorganyltin(IV) Hydroxide [Me₂Sn(A)(μ‐OH)]₂ (HA = Benzene‐1,2‐disulfonimide): Formation and Structures of the Mononuclear Complexes [Me₂Sn(A)₂(OPPh₃)₂] and [Me₂Sn(phen)₂]^2⊕ · 2 A^⊖ · MeCN Destructive complexation of the dimeric hydroxide [Me₂Sn(A)(μ‐OH)]₂, where A^⊖ is deprotonated benzene‐1,2‐disulfonimide, with two equivalents of triphenylphosphine oxide or 1,10‐phenanthroline in hot MeCN produced, along with Me₂SnO and water, the novel coordination compounds [Me₂Sn(A)₂(OPPh₃)₂] ( 3 , triclinic, space group P 1) and [Me₂Sn(phen)₂]^2⊕ · 2 A^⊖ · MeCN ( 4 , monoclinic, P2₁/c). In the uncharged all‐trans octahedral complex 3 , the heteroligands are unidentally O‐bonded to the tin atom, which resides on a crystallographic centre of inversion [Sn–O(S) 227.4(2), Sn–O(P) 219.6(2) pm, cis‐angles in the range 87–93°; anionic ligand partially disordered over two equally populated sites for N, two S and non‐coordinating O atoms]. The cation occurring in the crystal of 4 has a severely distorted cis‐octahedral C₂N₄ coordination geometry around tin and represents the first authenticated example of a dicationic tin(IV) dichelate [R₂Sn(L–L′)₂]^2⊕ to adopt a cis‐structure [C–Sn–C 108.44(11)°]. The five‐membered chelate rings are nearly planar, with similar bite angles of the bidentate ligands, but unsymmetric Sn–N bond lengths, each of the longer bonds being trans to a methyl group [ring 1: N–Sn–N 71.24(7)°, Sn–N 226.81(19) and 237.5(2) pm; ring 2: 71.63(7)°, 228.0(2) and 232.20(19) pm]. In both structures, the bicyclic and effectively C_S symmetric A^⊖ ions have their five‐membered rings distorted into an envelope conformation, with N atoms displaced by 28–43 pm from the corresponding C₆S₂ mean plane.     

Platinum(II) and Palladium(II) Bis(chelate) Complexes Containing both Tri(1‐cyclohepta‐2, 4, 6‐trienyl)phosphane,P(C7H7)3, and Dichalcogenolato Ligands

Tri(1‐cyclohepta‐2, 4, 6‐trienyl)phosphane, P(C₇H₇)₃ ([P] when coordinated to a metal atom), was used to stabilize complexes of platinum(II) and palladium(II) with chelating dichalcogenolato ligands as [P]M(E∩E) [E = S, ∩ = CH₂CH₂, M = Pt ( 3a ); E = S, ∩ = 1, 2‐C₆H₄, M = Pt ( 5a ), Pd ( 6a ); E = S, ∩ = C(O)C(O), M = Pt ( 7a ), Pd ( 8a ); E = S, Se, ∩ = 1, 2‐C₂(B₁₀H₁₀), M = Pt ( 9a, 9b ), Pd ( 10a, 10b ); E = S, ∩ = Fe₂(CO)₆, M = Pt ( 11a ), Pd ( 12a )]. Starting materials in all reactions were [P]MCl₂ with M = Pt ( 1 ) and Pd ( 2 ). Attempts at the synthesis of [P]M(ER)₂ with non‐chelating chalcogenolato ligands were not successful. All new complexes were characterized by multinuclear magnetic resonance spectroscopy in solution (¹H, ¹³C, ³¹P, ⁷⁷Se and ¹⁹⁵Pt NMR), and the molecular structures of 5a and 12a were determined by X‐ray analysis. Both in the solid state and in solution the ligand [P] is linked to the metal atom by the P‐M bond and by η²‐C=C coordination of the central C=C bond of one of the C₇H₇ rings. In solution, intramolecular exchange between coordinated and non‐coordinated C₇H₇ rings is observed, the exchange process being markedly faster in the case of M = Pd than for M = Pt.     

Binuclear CpV,Cp*V,and Cp*Ta Complexes containing Organochalcogenolato Bridges, μ‐ER (E = Sulfur,Selenium, Tellurium; R = Methyl,Phenyl, and Ferrocenyl)

Photolysis of the halfsandwich tetracarbonylmetal complexes CpV(CO)₄, Cp*V(CO)₄ and Cp*Ta(CO)₄ in solution in the presence of di(organyl)dichalcogenides E₂R₂ (E = S, Se, Te; R = Me, Ph, Fc) leads to diamagnetic doubly organochalcogenolato‐bridged compounds, [Cp⁽⁾M(CO)₂(μ‐ER)]₂. According to the X‐ray structure determinations carried out for [CpV(CO)₂(μ‐TeMe)]₂, [Cp*V(CO)₂(μ‐TePh)]₂ and [Cp*Ta(CO)₂(μ‐SPh)]₂, the molecular framework consists of a folded M₂(μ‐ER)₂ ring with the cyclopentadienyl ligands in cis‐configuration and the organyl substituents R in a syn‐equatorial arrangement, thus forming a bowl‐shaped molecule with the four terminal CO ligands protruding into the inner sphere. The M…M distances (in the range between 305 and 330 pm) are not considered to indicate direct bonding interactions. The vanadium complexes [Cp⁽⁾V(CO)₂(μ‐ER)]₂ are completely decarbonylated in the presence of an excess of E₂R₂ in boiling toluene, and in many cases the paramagnetic quadruply‐bridged products, [CpV(μ‐ER)₂]₂, can be isolated.     

Supramolecular hydrogen‐bonding patterns in the organic–inorganic hybrid compound bis(4‐amino‐5‐chloro‐2,6‐dimethylpyrimidinium) tetrathiocyanatozinc(II)–4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–water (1/2/2)

Zinc thiocyanate complexes have been found to be biologically active compounds. Zinc is also an essential element for the normal function of most organisms and is the main constituent in a number of metalloenzyme proteins. Pyrimidine and aminopyrimidine derivatives are biologically very important as they are components of nucleic acids. Thiocyanate ions can bridge metal ions by employing both their N and S atoms for coordination. They can play an important role in assembling different coordination structures and yield an interesting variety of one‐, two‐ and three‐dimensional polymeric metal–thiocyanate supramolecular frameworks. The structure of a new zinc thiocyanate–aminopyrimidine organic–inorganic compound, (C₆H₉ClN₃)₂[Zn(NCS)₄]·2C₆H₈ClN₃·2H₂O, is reported. The asymmetric unit consist of half a tetrathiocyanatozinc(II) dianion, an uncoordinated 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidinium cation, a 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine molecule and a water molecule. The Zn^II atom adopts a distorted tetrahedral coordination geometry and is coordinated by four N atoms from the thiocyanate anions. The Zn^II atom is located on a special position (twofold axis of symmetry). The pyrimidinium cation and the pyrimidine molecule are not coordinated to the Zn^II atom, but are hydrogen bonded to the uncoordinated water molecules and the metal‐coordinated thiocyanate ligands. The pyrimidine molecules and pyrimidinium cations also form base‐pair‐like structures with an R₂²(8) ring motif via N—H…N hydrogen bonds. The crystal structure is further stabilized by intermolecular N—H…O, O—H…S, N—H…S and O—H…N hydrogen bonds, by intramolecular N—H…Cl and C—H…Cl hydrogen bonds, and also by π–π stacking interactions.