Effect of nature of metallic subs trate on adhesion strength of polyvinylbutyral - metal joints

The effect of the physicomechanical properties of the substrates on the adhesion strength of the metal—polymer system was investigated.Institute of the Mechanics of Polymers, Academy of Sciences of the Latvian SSR, Riga. Institute of Chemistry and Chemical Technology, Academy of Sciences of the Lithuanian SSR, Vil'nyus. Translated from Mekhanika Polimerov, No. 1, pp. 81–86, January–February, 1972.     

Concerning the investigation of the supermolecular structure of polymers with a three-dimensional network

The results of an investigation of the structure and properties of a series of crosslinked polymers are presented. It is shown that the structure is determined by the chemical structure of the starting components and the method of synthesis.Institute of Chemistry of High-Molecular Compounds, Academy of Sciences of the Ukrainian SSR, Kiev. Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Mekhanika Polimerov, No. 5, pp. 934–936, September–October, 1970.     

Effect of proton-electron irradiation on the strength of a glass-reinforced plastic and its components

The action of protons and electrons on the properties of glass strands under vacuum conditions has been experimentally investigated. The experimental procedure is described. The effects of irradiation, strain rate, and reduced temperature and pressure on the properties of glass reinforcement and glass-reinforced plastics are estimated.Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev; Physicotechnical Institute of Low Temperatures, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Mekhanika Polimerov, No. 4, pp. 755–760, July–August, 1970.     

On the applicability of two-dimensional applied theories to problems of the stability of axially loaded cylindrical shells made of materials with low shear stiffness

The applicability of two-dimensional applied theories of the Kirchhoff-Love, Timoshenko, and Ambartsumyan types to problems of the stability of shells with low shear stiffness [1] is discussed. The critical loads given by these theories are compared with those recently obtained [6–8] by solving the problem of the stability of a cylindrical shell on the basis of general solutions [3, 4] of the three-dimensional linearized equations of the theory of elasticity [5].Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. L'vov Polytechnic Institute. Translated from Mekhanika Polimerov, No. 1, pp. 141–143, January–February, 1970.     

Effect of material properties on the stability of transversely isotropic shells with an elastic filler subjected to the action of mechanical loads and temperature

The effect of the low shear strength of the material (glass-reinforced plastic) on the stability of cylindrical shells with an elastic filler is investigated in relation to axial compression, external pressure, and heating. The equations of the thermoelastic problem of the theory of monotropic shells, constructed with allowance for the effect of tangential shearing stresses, are used in the calculations.Physicomechanical Institute, Academy of Sciences of the Ukrainian SSR, L'vov. L'vov Polytechnic Institute. Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 5, pp. 903–907, September–October, 1970.     

Nonequilibrium thermofield dynamics and the nonequilibrium statistical operator method

V. A. Steklov Mathematics Institute, USSR Academy of Sciences; Institute of the Physics of Condensed Systems, Ukrainian SSR Academy of Sciences. Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 88, No. 2, pp. 286–310, August, 1991.     

Effect of hydrostatic pressure on submicrocrack formation in oriented polymers

Small-angle x-ray scattering has been used to obtain a quantitative estimate of the concentration and size of the submicrocracks in Kapron and polypropylene equally extended at 1 and 1500 atm. Direct evidence of the retarding effect of pressure on fracture development has been obtained.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga: Ioffe Physicotechnical Institute, Academy of Sciences of the USSR, Leningrad. Translated from Mekhanika Polimerov, No. 5, pp. 917–921, September–October, 1971.     

Algebraic operators and pairs of self-adjoint operators connected by a polynomial relation

Institute of Mathematics, Academy of Sciences of the Ukrainian SSR. Translated from Funktsional'nyi Analiz i Ego Prilozheniya, Vol. 25, No. 4, pp. 72–74, October–December, 1991.     

Periodic shear deformation of a curing epoxy composition

The curing of an epoxy resin with amines is investigated in relation to the changes in the viscoelastic shear characteristics. The effect of the shear deformation amplitude on the curing kinetics is considered.Presented at the Symposium on Polymer Rheology, Institute of Petrochemical Synthesis, Academy of Sciences of the USSR, Moscow, May, 1970.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 301–306, March–April, 1971.     

Structure of quasitriangular quasi—hopf algebras

Physicotechnical Institute of Low Temperatures, Academy of Sciences of the Ukrainian SSR, Khar'kov. Translated from Funktsional'nyi Analiz i Ego Prilozheniya, Vol. 26, No. 1, pp. 78–80, January–March, 1992.     

Certain problems in developing a theory and design methods for anisotropic shells and plates with finite stiffness in shear. A survey

A survey is presented here of research on theory and design methods for shells and plates made of anisotropic materials, such as laminate reinforced plastics [4–13], compliant in shear. The report is based mainly on studies made at the Western Science Center, Academy of Sciences of the Ukrainian SSR during the last five years (after the previous survey [8] has been published), with the introduction of generalized Timoshenko-type theories.Branch of Mathematical Physics, Institute of Mathematics, Academy of Sciences of the Ukrainian SSR, L'vov. Translated from Mekhanika Polimerov, No. 2, pp. 269–284, March–April, 1975.     

Infinite-dimensional Schrödinger equations and the representation of a group of symplectomorphisms of a Hilbert phase space

Mathematics Institute, Academy of Sciences of the Ukrainian SSR. Translated from Funktsional'nyi Analiz i Ego Prilozheniya, Vol. 26, No. 1, pp. 91–93, January–March, 1992.     

An infinitesimal object of the hypercomplex system,generated by double cosets,and nonlinear differential equations

Mathematics Institute, Academy of Sciences of the Ukrainian SSR. Translated from Funktsional'nyi Analiz i Ego Prilozheniya, Vol. 25, No. 1, pp. 91–93, January–March, 1991.     

Periodic deformation and viscous flow of polymer solutions and melts

The effect of nonlinear periodic deformation on the relaxation spectra and viscous-elastic characteristics of polymer melts and solutions is considered. The experimental and calculated relationships between the dynamic characteristics and effective viscosity and the amplitude of the rate of periodic deformation were compared.For Communication 1, see [6].Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Institute of Mechanics Problems, Academy of Sciences of the USSR, Moscow. Translated from Mekhanika Polimerov, No. 2, pp. 357–366, March–April, 1970.     

Stability of shear-compliant cylindrical shells connected with an elastic foundation in a geometrically nonlinear formulation

The effect of transverse shear strains on the stability "in the large" of a cylindrical transversal-isotropic shell with an elastic filler under the effect of axial compression is investigated. The length of the cylindrical shell is assumed to be greater than the diameter. The approximate solution is obtained by the Bubnov-Galerkin method. Such a problem for an isotropic shell was considered earlier in [2, 4] on the basis of the equations of the classical Kirchhoff-Love theory.L'vov Physicomechanical Institute, Academy of Sciences of the Ukrainian SSR. Ternopol Branch, L'vov Polytechnic Institute. Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 1, pp. 113–117, January–February, 1972.     

Region of applicability of applied theories in problems of the stability of bars and plates with low shear stiffness subjected to uniaxial compression

The question of the region of applicability of applied theories of bending of bars and plates in stability problems is discussed in relation to the case of uniaxial compression. The critical loads given by these theories are compared with the recently obtained solution [4, 5, 7–10] based on the three-dimensional linearized equations of the theory of elasticity [6]. It is established that for the problems in question the Timoshenko and Ambartsumyan theories are accurate enough for engineering purposes over the entire practical region of variation of the geometric and physical parameters of the bar (plate), whereas the use of the Euler-Bernoulli and Kirchhoff-Love theories may lead to unacceptable errors.Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev; Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga; Lvov Polytechnic Institute. Translated from Mekhanika Polimerov, No. 6, pp. 1124–1126, November–December, 1969.     

Construction of a phenomenological theory of fracture of anisotropic media

The theory of fracture proposed in [1] is extended to anisotropic media.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 634–644, July–August, 1971.     

Some problems of the theory and analysis of anisotropic plates and shells with low shear stiffness

Certain problems associated with the theory and analysis of plates and shells made of materials with low shear stiffness are discussed.Physicomechanical Institute, Academy of Sciences of the Ukrainian SSR, L'vov. Translated from Mekhanika Polimerov, No. 4, pp. 693–714, July–August, 1970.     

Periodic deformation and viscous flow of polymer melts and solutions (communication 1)

The principles of the theory of thixotropy are formulated. The basic relations are obtained for cases of periodic vibration superimposed on shear flow. The effect of stationary shear flow on the linear dynamic characteristics of an elastic liquid is investigated. The calculated values are compared with the experimental data.Institute of Problems of Mechanics, Academy of Sciences of the USSR, Moscow. Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 519–527, May–June, 1969.     

Periodic deformation and viscous flow of polymer solutions and melts

The transition from the start of deformation to the establishing of a stationary state of nonlinear, periodic shear deformation and the kinetics of the change in the mechanical characteristics after deformation at finite amplitudes has ceased have been investigated. The calculated values have been compared with those obtained experimentally.For Communication 2 see [3].Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Institute of Mechanics Problems, Academy of Sciences of the USSR, Moscow. Translated from Mekhanika Polimerov, No. 3, pp. 521–529, May–June, 1970.