Spatial beam profiles of femtosecond X-ray pulses generated by laser Compton scattering from a low-emittance electron beam

Polarization-dependent spatial beam profiles of femtosecond X-ray pulses generated by a laser Compton scheme were measured. The X-ray pulses were generated by the interaction at an angle of 90° between 100-fs laser light and a 3-ps, 3π-mm mrad electron beam. The polarization of the laser light was linear in two different directions, either parallel or perpendicular to the electron beam axis. The measured profiles showed good agreement with theoretical results. Received: 5 July 2002 / Revised version: 17 October 2002 / Published online: 5 February 2003 RID="*" ID="*"Corresponding author. Fax: +81-424/684477, E-mail: msf_yorozu@shi.co.jp     

Photofabrication of periodic microstructures in azodye-doped polymers by interference of laser beams

Volume holographic gratings and two-dimensional periodic microstructures in azodye-doped polymethylmethacrylate were fabricated, respectively, by interference of two coherent beams of a femtosecond laser and by interference of three coherent beams of a nanosecond laser. The dependence of the first-order Bragg diffraction efficiency and the photoinduced refractive-index modulation of the gratings on the intensity of the writing light was investigated. The measurements of the absorption spectra before and after irradiation with the writing light suggest that the photoinduced gratings were refractive-index-modulated gratings, which arose from a photoinduced decomposition reaction of the azodye molecules through multiphoton absorption. In the experiments involving the interference of three beams, the period of the two-dimensional periodic microstructures was changed by adjusting the angle between the three writing beams. Received: 10 July 2002 / Revised version: 5 September 2002 / Published online: 20 December 2002 RID="*" ID="*"Corresponding author. Fax: +81-774/955206, E-mail: jhsi@photon.jst.go.jp     

Far-field distribution of third-harmonic generation by two crossed beams

The far-field intensity distribution of the third harmonic generated in a thin silica plate by two laser beams crossed at a small angle comprises four peaks approximately symmetric with respect to the bisector. The measurement of the intensity ratio of the inner to the outer peaks yielded values scattered from 10 to 20, surprisingly larger than the combinatorial value 9. The phase-matching factor, as determined by the full three-dimensional calculations required by the absence of axial symmetry, accounts for the observed ratio and its fluctuations. Received: 14 November 2002 / Published online: 22 May 2003 RID="*" ID="*"Corresponding author. Fax: +7-95/1941-994, E-mail: fomichev@imp.kiae.ru     

Fluctuation of femtosecond X-ray pulses generated by a laser-Compton scheme

A short-pulse X-ray-generation experiment was performed by Compton scattering through interaction between a 3-ps electron beam and 100-fs laser photons in a 90° scattering configuration. The observed X-ray intensity was typically 3×10⁴ photons/pulse and roughly matched the theoretically expected intensity. The X-ray energy and pulse duration were estimated theoretically to be 2.3 keV and 280 fs from the observed electron- and laser-beam parameters. The fluctuation of the X-ray output was measured as 25% (rms) during a 30-min operation. The fluctuation was expressed as a function of the fluctuation of the timing between the electron and laser beams. The measured fluctuation of the X-rays was approximately consistent with that caused by the fluctuation of the timing between the beams. Received: 19 November 2001 / Revised version: 23 January 2002 / Published online: 14 March 2002     

Polarization and threshold energy variation of distributed feedback lasing of oxazine dye in zirconia waveguides and in solutions

Distributed feedback lasing characteristics of oxazine dye in zirconia waveguides and in solutions were investigated. Oxazine-dye-doped waveguides were characterized by ellipsometry. Intensity modulation and polarization modulation were used to generate laser action. Tunable narrow line width laser action was achieved for the first, second, third and fourth Bragg orders. It was observed that the threshold pump energy decreased with the decrease of the Bragg order. The degree of polarization of the laser output also changed from 0.8 at the third Bragg order to 0.1 at the first Bragg order. Wide-band tuning of the distributed feedback laser output from 700 nm to 870 nm was achieved for the first-order action during intensity modulation. PACS 42.55.Mv; 42.70.Jr; 42.79.Gn     

Quantitative analysis of dilute mixtures of SO<Subscript>2</Subscript> in N<Subscript>2</Subscript> at 7.4 μm by difference frequency spectroscopy

We describe a 7.4-μm source based on difference frequency generation with 6.5 mW of 1278-nm radiation from an extended cavity laser and 66 mW of 1544-nm radiation from another extended cavity laser, amplified in an erbium-doped fibre amplifier. Optimum focusing of the input beams in the 5×5×10-mm³ AgGaSe₂ crystal, and the spatial and temporal characteristics of the output beam, are determined. The source is used for accurate determination of line parameters for selected lines of the ν₃ band of SO₂, centred at 1361 cm^-1. Subsequently, these lines are used for performing quantitative analysis of gas mixtures containing SO₂ at concentration levels down to 4 ppm without relying on any calibration with certified gas mixtures. This demonstrates the potential of infrared spectroscopy as a primary method for low-concentration gas analysis. Received: 16 January 2003 / Revised version: 19 February 2003 / Published online: 9 April 2003 RID="*" ID="*"Corresponding author. Fax: +45-4593/1137, E-mail: jh@dfm.dtu.dk     

Diode laser coupled to a high-<Emphasis Type="Bold">Q</Emphasis> microcavity via a GRIN lens

A miniature high-coherent diode laser was developed. Optical feedback from a high-Q microsphere resonator was used to narrow the spectrum of the laser, and a nearly half-pitch gradient-index lens served as a coupling element. As estimated from the variation in frequency-tuning range (chirp-reduction factor) the fast line width of the laser was reduced by more than three orders. It is remarkable that the system reveals stable single-mode operation at a relatively high feedback level. A tentative explanation is presented in terms of previously given models. Received: 8 July 2002 / Revised version: 9 March 2003 / Published online: 24 April 2003 RID="*" ID="*"Corresponding author. Fax: +7-095/334-0249, E-mail: vvv@okb.lpi.troitsk.ru     

Saturation effect in azobenzene polymers used for polarization holography

The saturation behavior of diffraction efficiency has been experimentally studied and theoretically modeled in azobenzene polyesters by recording polarization gratings with two beams of orthogonal circular polarization. The model is an extension of the phenomenological expression of Kakichashvili, derived from the rate equations for photoanisotropic materials, taking into account the effect of saturation with time and intensity. The saturation model of the polyester material can be used for the computer simulation of a polarization holographic data storage system under development. The simulation is based on fast Fourier transforms, taking the parameters of the recording material and the optical processes into account. Agreement between measured and simulated results proves the applicability of the saturation model as an efficient tool in the optimization of the system. Received: 16 September 2002 / Published online: 3 April 2003 RID="*" ID="*"Corresponding author. Fax: +36-1/463-4194, E-mail: pvarhe@math.bme.hu     

Generation and Modulation of Phase Difference of Output Intensities in a Feedback Nd:YAG Laser with an Extracavity Waveplate Rotated

External anisotropic feedback effects on the phase difference behaviour of output intensities in a microchip Nd：YAG laser are presented. By rotating a quarter wave plate placed in the external cavity, the angle between laser initial polarization direction and o-axis of the wave plate is tuned from -45°to 45°, which results in variable extra-cavity birefringence along two orthogonal detection directions. With only one optical path and one wave plate, laser intensities of the two orthogonal directions, both modulated by the external cavity length, are output with a tunable phase difference, which can be continuously changed from zero to twice as large as that of the waveplate. Experimental results as well as a theoretical analysis based on Fabry-Perot cavity equivalent model and the refractive index ellipsoid, are presented. The potential applications of this phenomenon are also discussed.     

Signal-to-noise enhancement techniques for quantum cascade absorption spectrometers employing optimal filtering and other approaches

Optical feedback to the laser source in tunable diode laser spectroscopy (TDLS) is known to create intensity modulation noise due to elatoning and optical feedback (i.e. multiplicative technical noise) that usually limits spectral signal-to-noise (S/N). The large technical noise often limits absorption spectroscopy to noise floors 100-fold greater than the Poisson shot noise limit due to fluctuations in the laser intensity. The high output powers generated from quantum cascade (QC) lasers, along with their high gain, makes these injection laser systems especially susceptible to technical noise. In this article we discuss a method of using optimal filtering to reduce technical noise. We have observed S/N enhancements ranging from ∼20% to a factor of ∼50. The degree to which optimal filtering enhances S/N depends on the similarity between the Fourier components of the technical noise and those of the signal, with lower S/N enhancements observed for more similar Fourier decompositions of the signal and technical noise. We also examine the linearity of optimal filtered spectra in both time and intensity. This was accomplished by creating a synthetic spectrum for the species being studied (CH₄, N₂O, CO₂ and H₂O in ambient air) utilizing line positions and linewidths with an assumed Voigt profile from a commercial database (HITRAN). Agreement better than 0.036% in wavenumber and 1.64% in intensity (up to a 260-fold intensity ratio employed) was observed. Our results suggest that rapid ex post facto digital optimal filtering can be used to enhance S/N for routine trace gas detection. Received: 1 April 2002 / Revised version: 7 May 2002 / Published online: 21 August 2002 RID="*" ID="*"Corresponding author. Fax: +1-509/376-6066, E-mail: robert.disselkamp@pnl.gov     

Efficient and highly photostable solid-state dye lasers based on modified dipyrromethene.BF2 complexes incorporated into solid matrices of poly(methyl methacrylate)

We report on the laser action of modified dipyrromethene.BF₂ complexes both dissolved in poly(methyl methacrylate) and copolymerized with methyl methacrylate. All recently synthesized dyes have the chromophore core of laser dye pyrromethene 567, differing in the substituent in position 8. The new dyes showed important and most significant increases in both lasing efficiency and photostability. When the laser samples were pumped transversely at 534 nm, laser emission was obtained with efficiencies of over 30% in most cases, to be compared with a lasing efficiency of 12% exhibited by reference dye pyrromethene 567 under the same experimental conditions. Some of the materials exhibited highly photostable laser action, with no sign of degradation in the laser output after 60000 pump pulses at the same position of the sample at a repetition rate of 10 Hz, whereas the laser emission of reference dye pyrromethene 567 dropped to zero after less than 40000 pump pulses. Received: 19 November 2002 / Revised version: 20 February 2003 / Published online: 9 April 2003 RID="*" ID="*"Corresponding author. Fax: +34-91/564-2431, E-mail: acostela@iqfr.csic.es     

A compact frequency-doubled 10-kHz PRF copper-vapour-laser-pumped dye laser

A 10-kHz pulse-repetition-frequency dye-laser master-oscillator power amplifier, end-pumped by a copper vapour laser (CVL), is reported. This laser was based on recently available, lightweight and compact CVL and dye laser components. Dye laser tunability was achieved from 592 to 622 nm and, when the oscillator was etalon line-narrowed, up to 1.5 W of single-etalon-mode output was obtained from the amplifier at the 608-nm peak tuning wavelength. By frequency doubling this amplified output in a BBO crystal we obtained up to 225 mW of 5-GHz 308-nm output, which is suitable for the performance of tropospheric hydroxyl radical concentration measurements. Received: 16 July 2002 / Revised version: 6 November 2002 / Published online: 5 February 2003 RID="*" ID="*"Present address: Department of Geography, University of Cambridge, Cambridge, CB2 3EN, UK RID="**" ID="**"Corresponding author. Fax: +44-1865/272400, E-mail: d.coutts1@physics.ox.ac.uk     

New organic–inorganic hybrid matrices doped with rhodamine 6G as solid-state dye lasers

We report on the laser action of rhodamine 6G (Rh6G) incorporated into new hybrid organic–inorganic monolithic materials. The synthesis of these materials proceeded via the simultaneous sol-gel process of the inorganic part (tetraethoxysilane or tetramethoxysilane) and the free-radical polymerization of an organic monomer part (2-hydroxypropyl methacrylate, 2-hydroxyethyl methacrylate and a 1:1 v/v copolymer of this monomer with methyl methacrylate). The wt. % proportion of the alkoxide was systematically varied in each organic formulation, and the effect of each organic–inorganic composition on the lasing properties of Rh6G was evaluated. The laser samples were transversely pumped and the influence on the laser action of dye concentration, pump wavelength and pump repetition rate was analyzed. Lasing efficiencies of up 26% and good stabilities, with a 90% drop in the initial laser output of up to 12000 pump pulses at 2.5 Hz, were obtained when the samples were pumped at 355 nm with 5.5 mJ/pulse from the third harmonic of a Q-switched Nd:YAG laser. Received: 31 July 2002 / Revised version: 14 October 2002 / Published online: 20 December 2002 RID="*" ID="*"Corresponding author. Fax: +34-91/564-4853, E-mail: ogarcia@ctp.csic.es     

Poincaré representation of polarization-shaped femtosecond laser pulses

The usage of Poincaré phase space for the representation of polarization-shaped femtosecond laser pulses is discussed. In these types of light fields the polarization state (i.e. ellipticity and orientation) changes as a function of time within a single laser pulse. Such deliberate variation can be achieved by frequency-domain femtosecond pulse shaping in which two polarization components are manipulated individually. Here it is shown how these light pulses can be represented as temporal trajectories through the ellipticity-orientation (Poincaré) phase space, whereas conventional light (either continuous-wave or pulsed) is determined by only one specific Poincaré location. General properties of parametric Poincaré trajectories are discussed, and their relation to experimentally accessible pulse-manipulation parameters (i.e. amplitudes and phases) determined. Specifically, it is shown how the maximum rate by which a given polarization state can be turned into a different one (at significant intensity levels) is limited by the spectral laser bandwidth. Apart from their direct usage in polarization-shaped pulse representation, Poincaré trajectories also form the basis for intuitive quasi-three-dimensional renderings of the electric field profile. There, the temporal evolution of polarization, intensity, and chirp is directly apparent in a single illustration. Received: 10 December 2002 / Published online: 24 April 2003 RID="*" ID="*"Corresponding author. Fax: +49-931/888-4906, E-mail: brixner@physik.uni-wuerzburg.de     

Self-adaptive Nd:YLF holographic laser with selectable wavelength operation

We demonstrate, for the first time to our knowledge, operation of a self-adaptive holographic laser with wavelength selection, which uses Nd:YLF as the gain medium. The holographic laser was self-starting and, by virtue of the temporal dynamics in writing the gain grating, passively Q-switched the cavity to produce pulses with 20–50 ns duration. A pulse energy of 184 mJ was obtained from the system with beams having a TEM₀₀ spatial profile. Single-longitudinal-mode operation was observed with near-transform-limited bandwidth. Received: 30 July 2002 / Revised version: 1 October 2002 / Published online: 26 February 2003 RID="*" ID="*"Corresponding author. Fax: +44-20/7594-7744, E-mail: s.y.lam@ic.ac.uk     

Femtosecond waveguide writing: a new avenue to three-dimensional integrated optics

Using tightly focussed femtosecond laser pulses, waveguides can be fabricated inside various glasses and crystals. This technique has the potential to generate not only planar but three-dimensional photonic devices. In this paper we present, to the best of our knowledge, the first true three-dimensional integrated optical device, a 1×3 splitter fabricated in pure fused silica. The optical properties of this device and possibilities for the fabrication of complex high-density integrated optical elements are discussed. Received: 23 December 2002 / Accepted: 6 January 2003 / Published online: 28 March 2003 RID="*" ID="*"Corresponding author. Fax: +49-3641/65-7680, E-mail: nolte@iap.uni-jena.de     

Diode-pumped cw tunable two-frequency YAG:Nd<Superscript>3+</Superscript> laser with coupled resonators

Using the mode splitting that can be achieved by exploiting the effect of photoelasticity and the mode selection properties of coupled resonators, single- and two-frequency operation of a diode pumped cw YAG:Nd³⁺ laser was observed. In the two-frequency case, a regime with two orthogonal linearly polarized modes was realized. The frequency difference between the adjacent modes could be varied from 50 MHz to 8.4 GHz. A maximum laser output power of 12 mW was achieved at a pump level of 240 mW . Received: 1 November 2002 / Revised version: 14 January 2003 / Published online: 19 March 2003 RID="*" ID="*"Corresponding author. Fax: +375-17/2840-879, E-mail: ryabtsev@dragon.bas-net.by     

Laser vaporization synthesis of polyhedral graphite

Polyhedral graphite (PG) particles have been synthesized by CO₂ laser vaporization of graphite in high-pressure Ar gas (8×10⁵ Pa). Faceted PG particles, ranging in size from 110 to 500 nm, have a turbostratic structure. The yield of PG is more than 90%. This synthesis is based on the condensation of hot carbon species confined by an Ar-gas atmosphere. Received: 22 January 2003 / Accepted: 24 January 2003 / Published online: 11 April 2003 RID="*" ID="*"Corresponding author. Fax: +81-59/231-9471, E-mail: kokai@chem.mie-u.ac.jp Permanent address: Chemistry Department for Materials, Mie University, 1515 Kamihama, Tsu, Mie 514-8507, Japan     

The laser pulse from a rf waveguide CO2 laser

The behaviour of a rf-excited waveguide CO₂ laser in the pulse regime is studied experimentally. The specific time sections of the pulse have been defined and described in detail. The output pulse evolution versus input power, pressure of the laser mixture, output coupling, repetition frequency and pulse width has been investigated. The spectral content of the pulse has been analysed. A model explaining the effect of laser tuning during the pulse duration is given. The ultrahigh pulse (UHP), defined as the pulse for which the bulge effect occurs, is predicted. Received: 22 October 2002 / Revised version: 13 January 2003 / Published online: 26 March 2003 RID="*" ID="*"Corresponding author. Fax: +48-71/3203-189, E-mail: eda@zr.ita.pwr.wroc.pl