A highly efficient synthesis of (Z)‐1‐aryl‐2‐silyl‐1‐ stannylethenes and their conversion to (E)‐2‐ arylethenyl‐, (Z)‐2‐(2‐pyridyl)ethenyl‐ and allenyl‐silanes

A Pd(dba)₂–P(OEt)₃ combination allowed the silastannation of arylacetylenes, 1‐hexyne or propargyl alcohols with tributyl(trimethylsilyl)stannane to take place at room temperature, producing (Z)‐2‐silyl‐1‐stannyl‐1‐substituted ethenes in high yields. Novel silyl(stannyl)ethenes were fully characterized by ¹H‐, ¹³C‐, ²⁹Si‐ and ¹¹⁹Sn‐NMR as well as infrared and mass analyses. Treatment of a series of (Z)‐1‐aryl‐2‐silyl‐1‐stannylethenes and (Z)‐1‐(3‐pyridyl)‐2‐silyl‐1‐stannylethene with hydrochloric acid or hydroiodic acid in the presence of tetraethylammonium chloride (TEACl) or tetrabutylammonium iodide (TBAI) led to the exclusive formation of (E)‐trimethyl(2‐arylethenyl)silanes with high stereoselectivity. A similar reaction of (Z)‐1‐(2‐anisyl)‐2‐silyl‐1‐stannylethene also produced E‐type trimethyl[2‐(2‐anisyl)ethenyl]silane, while (Z)‐trimethyl [2‐(2‐pyridyl)ethenyl]silane was produced exclusively from (Z)‐1‐(2‐pyridyl)‐2‐silyl‐1‐stannylethene. Protodestannylation of (Z)‐1‐[hydroxy(phenyl)methyl]‐2‐silyl‐1‐stannylethene with trifluoroacetic acid took place via the β‐elimination of hydroxystannane, providing trimethyl(3‐phenylpropa‐1,2‐dienyl)silane quite easily. The destannylation products were also fully characterized. Copyright © 2007 John Wiley & Sons, Ltd.     

(4,6‐Dimethyl‐2‐sulfanylidenepyrimidin‐1‐ium) trichlorido(thiourea‐κS)zinc(II)

The title compound, (C₆H₉N₂S)[ZnCl₃{SC(NH₂)₂}], exists as a zincate where the zinc(II) centre is coordinated by three chloride ligands and a thiourea ligand to form the anion. The organic cation adopts the protonated 4,6‐dimethyl‐2‐sulfanylidenepyrimidin‐1‐ium (L) form of 4,6‐dimethylpyrimidine‐2(1H)‐thione. Two short N—H...Cl hydrogen bonds involving the pyrimidine H atoms and the [ZnCl₃L]⁻ anion form a crystallographically centrosymmetric dimeric unit consisting of two anions and two cations. The packing structure is completed by longer‐range hydrogen bonds donated by the thiourea NH₂ groups to chloride ligand hydrogen‐bond acceptors.     

A Novel Chemoselective Cleavage of (tert‐Butyl)(dimethyl)silyl (TBS) Ethers Catalyzed by Ce(SO4)2⋅4 H2O

(tert‐Butyl)(dimethyl)silyl (^tBuMe₂Si; TBS) phenyl/alkyl ethers were efficiently cleaved to the corresponding parent hydroxy compounds in good yields using catalytic amounts of Ce(SO₄)₂?4 H₂O by microwave‐assisted or conventional heating in MeOH. Intramolecular and competitive experiments demonstrated the chemoselective deprotection of TBS ethers in the presence of triisopropylsilyl (ⁱPr₃Si; TIPS) and (tert‐butyl)(diphenyl)silyl (^tBuPh₂Si; TBDPS) ethers.     

Crystallization experiments with the dinuclear chelate ring complex di‐μ‐chlorido‐bis[(η2‐2‐allyl‐4‐methoxy‐5‐{[(propan‐2‐yloxy)carbonyl]methoxy}phenyl‐κC1)platinum(II)]

Crystallization experiments with the dinuclear chelate ring complex di‐μ‐chlorido‐bis[(η²‐2‐allyl‐4‐methoxy‐5‐{[(propan‐2‐yloxy)carbonyl]methoxy}phenyl‐κC¹)platinum(II)], [Pt₂(C₁₅H₁₉O₄)₂Cl₂], containing a derivative of the natural compound eugenol as ligand, have been performed. Using five different sets of crystallization conditions resulted in four different complexes which can be further used as starting compounds for the synthesis of Pt complexes with promising anticancer activities. In the case of vapour diffusion with the binary chloroform–diethyl ether or methylene chloride–diethyl ether systems, no change of the molecular structure was observed. Using evaporation from acetonitrile (at room temperature), dimethylformamide (DMF, at 313 K) or dimethyl sulfoxide (DMSO, at 313 K), however, resulted in the displacement of a chloride ligand by the solvent, giving, respectively, the mononuclear complexes (acetonitrile‐κN)(η²‐2‐allyl‐4‐methoxy‐5‐{[(propan‐2‐yloxy)carbonyl]methoxy}phenyl‐κC¹)chloridoplatinum(II) monohydrate, [Pt(C₁₅H₁₉O₄)Cl(CH₃CN)]·H₂O, (η²‐2‐allyl‐4‐methoxy‐5‐{[(propan‐2‐yloxy)carbonyl]methoxy}phenyl‐κC¹)chlorido(dimethylformamide‐κO)platinum(II), [Pt(C₁₅H₁₉O₄)Cl(C₂H₇NO)], and (η²‐2‐allyl‐4‐methoxy‐5‐{[(propan‐2‐yloxy)carbonyl]methoxy}phenyl‐κC¹)chlorido(dimethyl sulfoxide‐κS)platinum(II), determined as the analogue {η²‐2‐allyl‐4‐methoxy‐5‐[(ethoxycarbonyl)methoxy]phenyl‐κC¹}chlorido(dimethyl sulfoxide‐κS)platinum(II), [Pt(C₁₄H₁₇O₄)Cl(C₂H₆OS)]. The crystal structures confirm that acetonitrile interacts with the Pt^II atom via its N atom, while for DMSO, the S atom is the coordinating atom. For the replacement, the longest of the two Pt—Cl bonds is cleaved, leading to a cis position of the solvent ligand with respect to the allyl group. The crystal packing of the complexes is characterized by dimer formation via C—H…O and C—H…π interactions, but no π–π interactions are observed despite the presence of the aromatic ring.     

Chlorido(dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐κ2N,N′)(η5‐pentamethylcyclopentadienyl)rhodium(III) chloride 1‐hydroxypyrrolidine‐2,5‐dione disolvate

The title complex, [Rh(C₁₀H₁₅)Cl(C₁₄H₁₂N₂O₄)]Cl·2C₄H₅NO₃, has been synthesized by a substitution reaction of the precursor [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]chlorido(pentamethylcyclopentadienyl)rhodium(III) chloride with NaOCH₃. The Rh^III cation is located in an RhC₅N₂Cl eight‐coordinated environment. In the crystal, 1‐hydroxypyrrolidine‐2,5‐dione (NHS) solvent molecules form strong hydrogen bonds with the Cl⁻ counter‐anions in the lattice and weak hydrogen bonds with the pentamethylcyclopentadienyl (Cp*) ligands. Hydrogen bonding between the Cp* ligands, the NHS solvent molecules and the Cl⁻ counter‐anions form links in a V‐shaped chain of Rh^III complex cations along the c axis. Weak hydrogen bonds between the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate ligands and the Cl⁻ counter‐anions connect the components into a supramolecular three‐dimensional network. The synthetic route to the dimethyl 2,2′‐bipyridine‐4,4′‐dicarboxylate‐containing rhodium complex from the [bis(2,5‐dioxopyrrolidin‐1‐yl) 2,2′‐bipyridine‐4,4′‐dicarboxylate]rhodium(III) precursor may be applied to link Rh catalysts to the surface of electrodes.     

1,1‐Disilyl Alcohols as d1 Synthons: Harnessing the 1,2‐Brook Rearrangement

1,1‐Disilyl alcohols like 6 give the silyl ethers like 9 on treatment with base and alkyl halides, in a reaction which may be formulated as the alkylation of the Brook‐rearranged carbanion 8 . The products can be oxidised to give ketones like 10 , showing that this Brook‐rearranging system supplies a controlled d¹ synthon of the acyl anion class. The alcohols can be prepared from the acid chloride 12 and dimethyl(phenyl)silyllithium, but the intermediate anion 21 need not be worked up; it can be used directly in the alkylation step.     

Impact of the anion and chalcogen on the crystal structure and properties of 4,6‐dimethyl‐2‐pyrimido(thio)nium halides

By the reaction of urea or thiourea, acetylacetone and hydrogen halide (HF, HBr or HI), we have obtained seven new 4,6‐dimethyl‐2‐pyrimido(thio)nium salts, which were characterized by single‐crystal X‐ray diffraction, namely, 4,6‐dimethyl‐2‐oxo‐2,3‐dihydropyrimidin‐1‐ium bifluoride, C₆H₉N₂O⁺·HF₂^? or (dmpH)F₂H, 4,6‐dimethyl‐2‐oxo‐2,3‐dihydropyrimidin‐1‐ium bromide, C₆H₉N₂O⁺·Br^? or (dmpH)Br, 4,6‐dimethyl‐2‐oxo‐2,3‐dihydropyrimidin‐1‐ium iodide, C₆H₉N₂O⁺·I^? or (dmpH)I, 4,6‐dimethyl‐2‐oxo‐2,3‐dihydropyrimidin‐1‐ium iodide–urea (1/1), C₆H₉N₂O⁺·I^?·CH₄N₂O or (dmpH)I·ur, 4,6‐dimethyl‐2‐sulfanylidene‐2,3‐dihydropyrimidin‐1‐ium bifluoride–thiourea (1/1), C₆H₉N₂S⁺·HF₂^?·CH₄N₂S or (dmptH)F₂H·tu, 4,6‐dimethyl‐2‐sulfanylidene‐2,3‐dihydropyrimidin‐1‐ium bromide, C₆H₉N₂S⁺·Br^? or (dmptH)Br, and 4,6‐dimethyl‐2‐sulfanylidene‐2,3‐dihydropyrimidin‐1‐ium iodide, C₆H₉N₂S⁺·I^? or (dmptH)I. Three HCl derivatives were described previously in the literature, namely, 4,6‐dimethyl‐2‐oxo‐2,3‐dihydropyrimidin‐1‐ium chloride, (dmpH)Cl, 4,6‐dimethyl‐2‐sulfanylidene‐2,3‐dihydropyrimidin‐1‐ium chloride monohydrate, (dmptH)Cl·H₂O, and 4,6‐dimethyl‐2‐sulfanylidene‐2,3‐dihydropyrimidin‐1‐ium chloride–thiourea (1/1), (dmptH)Cl·tu. Structural analysis shows that in 9 out of 10 of these compounds, the ions form one‐dimensional chains or ribbons stabilized by hydrogen bonds. Only in one compound are parallel planes present. In all the structures, there are charge‐assisted N⁺—H…X^? hydrogen bonds, as well as weaker C_Ar⁺—H…X^? and π⁺…X^? interactions. The structures can be divided into five types according to their hydrogen‐bond patterns. All the compounds undergo thermal decomposition at relatively high temperatures (150–300 °C) without melting. Four oxopyrimidinium salts containing a π⁺…X^?…π⁺ sandwich‐like structural motif exhibit luminescent properties.     

Synthesis,structure and biological activity of new 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐organylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles

New 6,6‐dimethyl‐2‐oxo‐4‐{2‐[5‐alkylsilyl(germyl)]furan(thiophen)‐2‐yl}vinyl‐5,6‐dihydro‐2H‐pyran‐3‐carbonitriles (IC₅₀: 1–6 µg ml^?1) have been prepared by the condensation of corresponding silicon‐ and germanium‐containing furyl(thienyl)‐2‐carbaldehydes with 3‐cyano‐4,6,6‐trimethyl‐5,6‐dihydropyran‐2‐one using piperidine acetate as a catalyst. The obtained carbonitriles were identified using NMR (¹H, ¹³C and ²⁹Si) spectroscopy and GC‐MS. The structure of 6,6‐dimethyl‐2‐oxo‐4‐[2‐(5‐trimethylsilyl)thiophen‐2‐yl]‐5,6‐dihydro‐2H‐pyran‐3‐carbonitrile was studied using X‐ray diffractometry. The influences of the heterocycle and the structure of the organoelement substituent on cytotoxicity and on matrix metalloproteinase inhibition have been studied. Copyright © 2015 John Wiley & Sons, Ltd.     

1‐Carboxymethyl‐3‐methyl‐1H‐imidazol‐3‐ium chloride 2‐(3‐methyl‐1H‐imidazol‐3‐ium‐1‐yl)acetate monohydrate: a crystal stabilized by imidazolium zwitterions

The title compound, C₆H₉N₂O₂⁺·Cl⁻·C₆H₈N₂O₂·H₂O, contains one 2‐(3‐methyl‐1H‐imidazol‐3‐ium‐1‐yl)acetate inner salt molecule, one 1‐carboxymethyl‐3‐methyl‐1H‐imidazol‐3‐ium cation, one chloride ion and one water molecule. In the extended structure, chloride anions and water molecules are linked via O—H...Cl hydrogen bonds, forming an infinite one‐dimensional chain. The chloride anions are also linked by two weak C—H...Cl interactions to neighbouring methylene groups and imidazole rings. Two imidazolium moieties form a homoconjugated cation through a strong and asymmetric O—H...O hydrogen bond of 2.472 (2) Å. The IR spectrum shows a continuous D‐type absorption in the region below 1300 cm⁻¹ and is different to that of 1‐carboxymethyl‐3‐methylimidazolium chloride [Xuan, Wang & Xue (2012). Spectrochim. Acta Part A, 96 , 436–443].     

μ3‐η2:η2:η2‐Coordination of Primary Silane on a Triruthenium Plane

A μ₃‐η²:η²:η²‐silane complex, [(Cp*Ru)₃(μ₃‐η²:η²:η²‐H₃SitBu)(μ‐H)₃] ( 2 a ; Cp*=η⁵‐C₅Me₅), was synthesized from the reaction of [{Cp*Ru(μ‐H)}₃(μ₃‐H)₂] ( 1 ) with tBuSiH₃. Complex 2 a is the first example of a silane ligand adopting a μ₃‐η²:η²:η² coordination mode. This unprecedented coordination mode was established by NMR and IR spectroscopy as well as X‐ray diffraction analysis and supported by a density functional study. Variable‐temperature NMR analysis implied that 2 a equilibrates with a tautomeric μ₃‐silyl complex ( 3 a ). Although 3 a was not isolated, the corresponding μ₃‐silyl complex, [(Cp*Ru)₃(μ₃‐η²:η²‐H₂SiPh)(H)(μ‐H)₃] ( 3 b ), was obtained from the reaction of 1 with PhSiH₃. Treatment of 2 a with PhSiH₃ resulted in a silane exchange reaction, leading to the formation of 3 b accompanied by the elimination of tBuSiH₃. This result indicates that the μ₃‐silane complex can be regarded as an “arrested” intermediate for the oxidative addition/reductive elimination of a primary silane to a trinuclear site.     

First Total Synthesis of N‐(3‐Guanidinopropyl)‐2‐(4‐hydroxyphenyl)‐2‐oxoacetamide

The first total synthesis of the α‐oxo amide‐based natural product, N‐(3‐guanidinopropyl)‐2‐(4‐hydroxyphenyl)‐2‐oxoacetamide ( 3 ), isolated from aqueous extracts of hydroid Campanularia sp., has been achieved. The α‐oxo amide 12 , prepared via the oxidative amidation of 1‐[4‐(benzyloxy)phenyl]‐2,2‐dibromoethanone ( 9a ) with 4‐{[(tert‐butyl)(dimethyl)silyl]oxy}butan‐1‐amine ( 10a ), has been used as the key intermediate in the total synthesis of 3 as HBr salt. On the way, an expeditious total synthesis of polyandrocarpamide C ( 2c ), isolated from marine ascidian Polyandrocarpa sp., was carried out in four steps.     

Gas‐phase ozonolysis: Rate coefficients for a series of terpenes and rate coefficients and OH yields for 2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene

The kinetics of the gas‐phase reactions of O₃ with a series of selected terpenes has been investigated under flow‐tube conditions at a pressure of 100 mbar synthetic air at 295 ± 0.5 K. In the presence of a large excess of m‐xylene as an OH radical scavenger, rate coefficients k(O₃+terpene) were obtained with a relative rate technique, (unit: cm³ molecule^?1 s^?1, errors represent 2σ): α‐pinene: (1.1 ± 0.2) × 10^?16, ³Δ‐carene: (5.9 ± 1.0) × 10^?17, limonene: (2.5 ± 0.3) × 10^?16, myrcene: (4.8 ± 0.6) × 10^?16, trans‐ocimene: (5.5 ± 0.8) × 10^?16, terpinolene: (1.6 ± 0.4) × 10^?15 and α‐terpinene: (1.5 ± 0.4) × 10^?14. Absolute rate coefficients for the reaction of O₃ with the used reference substances (2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene) were measured in a stopped‐flow system at a pressure of 500 mbar synthetic air at 295 ± 2 K using FT‐IR spectroscopy, (unit: cm³ molecule^?1 s^?1, errors represent 2σ ): 2‐methyl‐2‐butene: (4.1 ± 0.5) × 10^?16 and 2,3‐dimethyl‐2‐butene: (1.0 ± 0.2) × 10^?15. In addition, OH radical yields were found to be 0.47 ± 0.04 for 2‐methyl‐2‐butene and 0.77 ± 0.04 for 2,3‐dimethyl‐2‐butene. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 394–403, 2002     

2‐[N‐(2,3‐Dimethylphenyl)carbamoyl]benzenesulfonamide and the 3,4‐ and 2,6‐dimethylphenyl analogues

The structures of 2‐[(2,3‐dimethylphenyl)carbamoyl]benzenesulfonamide, 2‐[(3,4‐dimethylphenyl)carbamoyl]benzenesulfonamide and 2‐[(2,6‐dimethylphenyl)carbamoyl]benzenesulfonamide, all C₁₅H₁₆N₂O₃S, are stabilized by extensive intra‐ and intermolecular hydrogen bonds. In all three structures, the sulfonamide and carbamoyl groups are involved in hydrogen bonding. In the 2,3‐dimethyl and 2,6‐dimethyl derivatives, dimeric units and chains of molecules are formed parallel to the c axis. In the 3,4‐dimethyl derivative, the hydrogen bonding creates tetrameric units, resulting in macrocyclic R₄⁴(22) rings that form sheets in the ab plane. The three analogues are closely related to the fenamate class of nonsteroidal anti‐inflammatory drugs.     

Strong hydrogen bonds in the ionic pair (1,3‐diisopropyl‐4,5‐dimethyl‐4‐imidazolin‐2‐yl­idene)ammonium trichloro­(1,3‐diisopropyl‐4,5‐dimethyl‐4‐imidazolin‐2‐ylideneamine)­iron(II)

The title compound, (C₁₁H₂₂N₃)[FeCl₃(C₁₁H₂₁N₃)], is one of the rare examples where an isolated ionic pair of the type [A]ⁿ⁺[EMX₃]ⁿ⁻ (E is any non‐metal, M is any transition metal and X is any halogen) could be structurally characterized. Two short N—H⋯Cl contacts between the two ammonium H atoms and two of the three Cl atoms of the counter‐anion generate a six‐membered ring. The third Cl atom is involved in a weaker intra­molecular hydrogen bond to the neutral 1,3‐diisopropyl‐4,5‐dimethyl‐4‐imidazolin‐2‐yl­idene­amine ligand.     

Different molecular conformations co‐exist in each of three 2‐aryl‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamides: hydrogen bonding in zero,one and two dimensions

4‐Antipyrine [4‐amino‐1,5‐dimethyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐one] and its derivatives exhibit a range of biological activities, including analgesic, antibacterial and anti‐inflammatory, and new examples are always of potential interest and value. 2‐(4‐Chlorophenyl)‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamide, C₁₉H₁₈ClN₃O₂, (I), crystallizes with Z′ = 2 in the space group P, whereas its positional isomer 2‐(2‐chlorophenyl)‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamide, (II), crystallizes with Z′ = 1 in the space group C2/c; the molecules of (II) are disordered over two sets of atomic sites having occupancies of 0.6020 (18) and 0.3980 (18). The two independent molecules of (I) adopt different molecular conformations, as do the two disorder components in (II), where the 2‐chlorophenyl substituents adopt different orientations. The molecules of (I) are linked by a combination of N—H…O and C—H…O hydrogen bonds to form centrosymmetric four‐molecule aggregates, while those of (II) are linked by the same types of hydrogen bonds forming sheets. The related compound N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)‐2‐(3‐methoxyphenyl)acetamide, C₂₀H₂₁N₃O₃, (III), is isomorphous with (I) but not strictly isostructural; again the two independent molecules adopt different molecular conformations, and the molecules are linked by N—H…O and C—H…O hydrogen bonds to form ribbons. Comparisons are made with some related structures, indicating that a hydrogen‐bonded R₂²(10) ring is the common structural motif.     

Structural comparison of three N‐(4‐halogenophenyl)‐N′‐[1‐(2‐pyridyl)ethylidene]hydrazine hydrochlorides

2‐{1‐[(4‐Chloroanilino)methylidene]ethyl}pyridinium chloride methanol solvate, C₁₃H₁₃ClN₃⁺·Cl⁻·CH₃OH, (I), crystallizes as discrete cations and anions, with one molecule of methanol as solvent in the asymmetric unit. The N—C—C—N torsion angle in the cation indicates a cis conformation. The cations are located parallel to the (02) plane and are connected through hydrogen bonds by a methanol solvent molecule and a chloride anion, forming zigzag chains in the direction of the b axis. The crystal structure of 2‐{1‐[(4‐fluoroanilino)methylidene]ethyl}pyridinium chloride, C₁₃H₁₃FN₃⁺·Cl⁻, (II), contains just one anion and one cation in the asymmetric unit but no solvent. In contrast with (I), the N—C—C—N torsion angle in the cation corresponds with a trans conformation. The cations are located parallel to the (100) plane and are connected by hydrogen bonds to the chloride anions, forming zigzag chains in the direction of the b axis. In addition, the crystal packing is stabilized by weak π–π interactions between the pyridinium and benzene rings. The crystal of (II) is a nonmerohedral monoclinic twin which emulates an orthorhombic diffraction pattern. Twinning occurs via a twofold rotation about the c axis and the fractional contribution of the minor twin component refined to 0.324 (3). 2‐{1‐[(4‐Fluoroanilino)methylidene]ethyl}pyridinium chloride methanol disolvate, C₁₃H₁₃FN₃⁺·Cl⁻·2CH₃OH, (III), is a pseudopolymorph of (II). It crystallizes with two anions, two cations and four molecules of methanol in the asymmetric unit. Two symmetry‐equivalent cations are connected by hydrogen bonds to a chloride anion and a methanol solvent molecule, forming a centrosymmetric dimer. A further methanol molecule is hydrogen bonded to each chloride anion. These aggregates are connected by C—H...O contacts to form infinite chains. It is remarkable that the geometric structures of two compounds having two different formula units in their asymmetric units are essentially the same.     

Synthesis and properties of O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl cellulose

In this article, a series of O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl celluloses with different degree of substitution (DS) values was synthesized by a homogeneous reaction of cellulose with 2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl chloride in a 10% (w/w) dimethylacetamide/lithium chloride solution, combined with pyridine as the acid acceptor. The total DS values of the derivatives in anhydroglucose units was determined by ¹H and ¹³C NMR spectra, and ranged from 0.4 to 3.0, depending on the amount of acid chloride in the reaction. The effects of the total DS values and the O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl substituent distribution on the solubility of the derivatives were investigated. The lowest limit of the DS value for water‐soluble O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl cellulose was approximately 0.5, which is lower than that of methylcellulose. The amphiphilic derivatives with higher DS values than 1.7 exhibited a good solubility in both water and organic solvents, such as dimethyl sulfoxide, tetrahydrofuran, and chloroform. Sol‐gel transition in aqueous solution was observed for the amphiphilic derivatives with a higher DS value than 1.7; the precipitation temperature (T_p) decreased as the DS value increased, showing that the derivatives are highly temperature sensitive. The thermal properties of the fully substituted derivative were measured using polarized microscopy, DSC, and X‐ray diffraction; and are discussed in terms of phase transition of the sample derivatives. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 376–382, 2001     

Electrophilic Alkylations of Vinylsilanes: A Comparison of α‐ and β‐Silyl Effects

Kinetics of the reactions of benzhydrylium ions (Aryl₂CH⁺) with the vinylsilanes H₂C?C(CH₃)(SiR₃), H₂C?C(Ph)(SiR₃), and (E)‐PhCH?CHSiMe₃ have been measured photometrically in dichloromethane solution at 20 °C. All reactions follow second‐order kinetics, and the second‐order rate constants correlate linearly with the electrophilicity parameters E of the benzhydrylium ions, thus allowing us to include vinylsilanes in the benzhydrylium‐based nucleophilicity scale. The vinylsilane H₂C?C(CH₃)(SiMe₃), which is attacked by electrophiles at the CH₂ group, reacts one order of magnitude faster than propene, indicating that α‐silyl‐stabilization of the intermediate carbenium ion is significantly weaker than α‐methyl stabilization because H₂C?C(CH₃)₂ is 10³ times more reactive than propene. trans‐β‐(Trimethylsilyl)styrene, which is attacked by electrophiles at the silylated position, is even somewhat less reactive than styrene, showing that the hyperconjugative stabilization of the developing carbocation by the β‐silyl effect is not yet effective in the transition state. As a result, replacement of vinylic hydrogen atoms by SiMe₃ groups affect the nucleophilic reactivities of the corresponding C?C bonds only slightly, and vinylsilanes are significantly less nucleophilic than structurally related allylsilanes.     

A novel dinuclear MoVI complex with tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane

Recrystallization of [MoO₂Cl{HC(3,5‐Me₂pz)₃}]Cl [where HC(3,5‐Me₂pz)₃ is tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methane] led to the isolation of large quantities of the dinuclear complex dichlorido‐2κ²Cl‐μ‐oxido‐κ²O:O‐tetraoxido‐1κ²O,2κ²O‐[tris(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐1κN²)methane]dimolybdenum(IV) acetonitrile monosolvate, [Mo₂Cl₂O₄(C₁₆H₂₂N₆)]·CH₃CN or [{MoO₂Cl₂}(μ₂‐O){MoO₂[HC(3,5‐Me₂pz)₃]}]·CH₃CN. At 150 K, this complex cocrystallizes in the orthorhombic space group Pbcm with an acetonitrile molecule. The complex has mirror symmetry: only half of the complex constitutes the asymmetric unit and all the heavy elements (namely Mo and Cl) are located on the mirror plane. The acetonitrile molecule also lies on a mirror plane. The two crystallographically independent Mo⁶⁺ centres have drastically different coordination environments: while one Mo atom is hexacoordinated and chelated to HC(3,5‐Me₂pz)₃ (which occupies one face of the octahedron), the other Mo atom is instead pentacoordinated, having two chloride anions in the apical positions of the distorted trigonal bipyramid. This latter coordination mode of Mo^VI was found to be unprecedented. Individual complexes and solvent molecules are close‐packed in the solid state, mediated by various supramolecular contacts.     

Synthesis and Fungicidal Activity of (1Z, 3Z)‐4,4‐Dimethyl‐1‐substitutedphenyl‐2‐(1H‐1,2,4‐triazol‐1‐yl)‐pent‐1‐en‐3‐one O‐[2,4‐dimethylthiazole(or 4‐methyl‐1,2,3‐thiadiazole)]‐5‐carbonyl Oximes

A series of novel (Z)‐1‐tert‐butyl (or phenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)‐ethanone O‐[2,4‐dimethylthiazole (or 4‐methyl‐1,2,3‐thiadiazole) ?5‐carbonyl] oximes 5a – 5c and (1Z, 3Z)‐4,4‐dimethyl‐1‐substitutedphenyl‐2‐(1H‐1,2,4‐triazol‐1‐yl)‐pent‐1‐en‐3‐one O‐[2,4‐dimethylthiazole (or 4‐methyl‐1,2,3‐thiadiazole)‐5‐carbonyl] oximes 6a – 6e were synthesized by the condensations of (Z)‐1‐tert‐butyl (or phenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)‐ethanone oximes 3 or (1Z, 3Z)‐4,4‐dimethyl‐1‐substitutedphenyl‐2‐(1H‐1,2,4‐triazol‐1‐yl)‐pent‐1‐en‐3‐one oximes 4 with 2,4‐dimethylthiazole‐5‐carbonyl chloride or 4‐methyl‐1,2,3‐thiadiazole‐5‐carbonyl chloride in the basic condition. Their structures were confirmed by IR, ¹H NMR, mass spectroscopy, and elemental analyses. The results of preliminary bioassays showed the title compounds 5 and 6 exhibited moderate to good fungicidal activities. For example, compound 6c possessed 86.4% inhibition against Fusarium oxysporum, and compound 6b exhibited 86.4 and 100% inhibition against Fusarium oxysporum and Cercospora arachidicola Hori at the concentration of 50 mg/L, respectively.