Manipulation of separation selectivity of inorganic anions in electrostatic ion chromatography by the use of mixed cationic–zwitterionic micelles as the column coating solution

This paper describes an electrostatic ion chromatographic system in which the separation selectivity for inorganic anions, especially for sulfate and phosphate, could be manipulated by altering the molar ratio of the zwitterionic and cationic surfactants in the column coating solution used to prepare the stationary phase. The zwitterionic surfactant used for this study was 3-(N,N-dimethyltetradecylammonio)propanesulfonate (Zwittergent-3-14) and the cationic surfactant was tetradecyltrimethylammonium (TTA). Using a reversed-phase C₁₈ column (250×4.6 mm I.D.) coated with 10/10 (mM/mM) of TTA/Zwittergent-3-14 mixed micelles as the stationary phase and either NaHCO₃ or Na₂CO₃ aqueous solution as the eluent, together with suppressed conductivity detection, baseline separation of seven model inorganic anions was obtained. The elution order for those anions was found to be F⁻4²⁻−4²⁻2⁻−3⁻. Under the same conditions but using 1/10 (mM/mM) of TTA/Zwittergent-3-14 mixed micelles as the column coating solution, the elution order for these model ions was F⁻4²⁻4²⁻−2⁻−3⁻. The early elution of phosphate and sulfate is a unique attribute of this system. Detection limits for F⁻, HPO₄²⁻, Cl⁻, SO₄²⁻, NO₂⁻, Br⁻ and NO₃⁻ (S/N=3, sample injection volume 100 μl) were 0.11, 0.12, 0.12, 0.18, 0.49, 0.49, 0.52 μM, respectively.     

Simultaneous determination of anions and cations by ion-exclusion chromatography–cation-exchange chromatography with tartaric acid/18-crown-6 as eluent

Ion-exclusion chromatography–cation-exchange chromatography was developed for the simultaneous separation of common inorganic anions and cations (Cl⁻, NO₃⁻ and SO₄²⁻; Na⁺, NH₄⁺, K⁺, Mg²⁺ and Ca²⁺) on a weakly acidic cation-exchange column by elution with weak acid. Generally, the resolution among these monovalent cations was only moderate, thereby hindering the determination of these analytes in natural-water samples. Therefore, 18-crown-6 was added to the eluent to improve the resolution. A good separation of these anions and cations on a weakly acidic cation-exchange column was achieved in 30 min by elution with 5 mM tartaric acid/6 mM 18-crown-6/methanol–water (7.5:92.5). The ion-exclusion chromatography–cation-exchange chromatography method developed here was successfully applied to the separation of major anions and cations in an environmental water sample.     

Acid-rain monitoring in East Asia with a portable-type ion-exclusion–cation-exchange chromatographic analyzer

A monitoring system consisting of a portable-type conductimetric ion-exclusion–cation-exchange chromatographic (CEC) analyzer and a meteorological satellite data analyzer has been investigated for the evaluation of the effects of acid precipitation on natural and urban environments in East Asia. The portable ion-exclusion–CEC analyzer uses a polymethacrylate-based weakly acidic cation-exchange resin column in the H⁺-form and a weak-acid eluent (tartaric acid–methanol–water) and is applied for the simultaneous determination of anions (SO₄²⁻, NO₃⁻, and Cl⁻) and cations (Na⁺, NH₄⁺, K⁺, Mg²⁺, and Ca²⁺) in precipitation transported from mainland China to central Japan, as mapped by the meteorological satellite data analyzer. Linear calibration graphs of peak area versus concentration for anions and cations were observed in the concentration range 0–1.0 mM for the anions and 0–0.5 mM for the cations. Detection limits at a signal-to-noise ratio of 3 were in the range 5.18–12.1 ppb for the anions and 6.58–16.5 ppb for the cations. The practical utility of this monitoring system is presented.     

Modeling the separation performance of nanofiltration membranes for the mixed salts solution

A new model is proposed to evaluate the separation performance of nanofiltration (NF) membranes for the mixed salts solution. In the model, the observed transmission of an ion through a NF membrane is applied to express the separation performance of the membrane for the ion in the mixed salts solution, which has a relationship with the total concentration, the equivalent fraction and the species of each ion in the mixed salts solution. The verification of the model was carried out in the permeation experiments of some mixed salts solutions ((1) Na⁺, Cl⁻ and F⁻; (2) Na⁺, K⁺ and Cl⁻; (3) Na⁺, F⁻, Cl⁻ and NO₃⁻; (4) Na⁺, Cl⁻, NO₃⁻ and SO₄²⁻) through three commercial NF membranes (ESNA 1-LF, ESNA 1 and LES 90). According to the permeation experiments of three NF membranes for some binary salts solutions, the competition coefficients of ions were obtained. The model evaluation results agreed quite well with the experimental data. Finally, the model was applied to evaluate the observed transmission of each ion in the mixed salts solution (Na⁺, F⁻, Cl⁻, NO₃⁻ and SO₄²⁻) through three NF membranes. The agreement between the model evaluation results and the experimental data indicated that the model is suitable for evaluating the separation performance of three NF membranes for the mixed salts solution.     

Studies on elution conditions for the determination of anions by supressed ion-interaction chromatography using a graphitized carbon column

A new method has been developed for ion-interaction chromatography with suppressed conductivity detection and a new graphitized carbon packing, which is sintered from carbonic material at a high temperature. Combinations of various eluting agents, tetrabutylammonium hydroxide (TBA) and acetonitrile have been investigated to optimize the separation of eight common anions (F⁻, Cl⁻, NO₂⁻, Br⁻, NO₃⁻, SO₄²⁻, HPO₄²⁻ and I⁻). Calibration curves were linear from 0.5 to 10 μg/ml for F⁻, from 1.0 to 20 μg/ml for Cl⁻, NO₂⁻ and NO₃⁻, from 2.5 to 50 μg/ml for Br⁻ and SO₄²⁻ and from 5.0 to 100 μg/ml for HPO₄²⁻ and I⁻ with a correlation coefficient (r) of 0.999 or better. The relative standard deviations (R.S.D.s) of peak areas were between 0.2 and 0.9% for 10 repeated measurements. The application of this newly developed method was demonstrated by the determination of chloride, bromide and sulfate in pharmaceutical compounds using the direct injection method. The analytical results were within ±2% (relative) of the theoretical value, and thus in good agreement with the theoretical value for each sample.     

Ion chromatography of organic-rich natural waters from peatlands: I. Cl, NO2, Br, NO3, HPO4, SO4 and oxalate

Organic-rich natural waters from peat bogs in continental (Switzerland) and maritime (Shetland Islands, Scotland) areas were analysed for Cl⁻, NO₂⁻, Br⁻, NO₃⁻, HPO₄²⁻, SO₄²⁻ and oxalate using ion chromatography. These anions can be determined simultaneously in the surface and pore water samples from the continental bogs using a 250-μl injection loop. Using this loop, the detection limits were ca. 5 ng/g for the monovalent anions and SO₄²⁻ and 10 ng/g for HPO₄²⁻ and oxalate. An organics-removal cartridge (Dionex OnGuard P) was used to remove humic materials. These cartridges did not significantly affect the measured concentrations of anions in blind standards. Analyses of deionized water treated with these cartridges are not significantly different from those for untreated deionized water. For the maritime bogs, the relatively high concentrations of Cl⁻ (more than 100μ/g in many samples) and SO₄²⁻ (up to 50 μg/g) require two separate determinations for complete analyses. A 10-μl injection loop was used to determine Cl⁻, Br⁻ and SO₄²⁻. A 250-μl injection loop was used to measure NO₂⁻, NO₃⁻, HPO ₄²⁻ and oxalate. In each instance a Dionex OnGuard P cartridge was used to remove humic materials. In addition, a chloride-removal cartridge (Dionex OnGuard AG) was used to remove Cl⁻ when the larger injection loop was used. This cartridge has no significant effect on the measurement of HPO_4-²⁻ at concentrations of 20 ng/g. In each of the bog water chromatograms there were usually a number of unknown peaks. These are probably due mainly to organic anions.     

Field investigation of major and minor ions along Summit (Central Greenland) ice cores by ion chromatography

As a part of the European EUROCORE and GRIP (Greenland Ice Core Project) operations aimed at recovering deep ice cores at Summit (Central Greenland), we have for the first time successfully performed ion chromatography measurements in the field and investigated in detail the soluble impurities, including Na⁺, NH⁺₄, K⁺, Mg²⁺, Ca²⁺, F⁻, CH₃COO⁻, CH₂ OHCOO⁻, HCOO⁻, CH₃SO₃⁻, Cl⁻, NO⁻₂, SO₄²⁻ and C₂O₄²⁻, trapped in ice deposited over some 200 000 years in Greenland.     

Spectrophotometric study of complexation equilibria between HCrO4 and Cl ions

The complex equilibria between HCrO₄⁻ and Cl⁻ ions has been studied spectrophotometrically at a constant ionic strength of 3.0 mol dm⁻³ and the data have been analyzed both graphically and numerically by means of the program LETAGROP-SPEFO (L. G. Sillen and B. Warnquist, Arkiv. kemi. 1968, 31, 377). The experimental results can be explained on the basis of the following reaction: HCrO₄⁻+H⁺+Cl⁻ = CrO₃Cl⁻+H₂O (log β₁₁ = 1.37±0.08). Molar absorptivities of HCrO₄⁻ and CrO₃Cl⁻ were also reported.     

Capillary electrophoresis for measuring major and trace anions in thermal water and condensed-steam samples from hydrothermal springs and fumaroles

A new application of capillary electrophoresis for measuring major and trace anions in thermal water and condensed-steam samples is presented. Ten fluid samples were collected from hydrothermal springs and fumaroles located in a volcanic zone of Deception Island, Antarctica. Anion separation was achieved in less than 6 min using indirect UV detection at 254 nm with a negative power supply (−15 kV). The electrolyte consisted of 4.7 mM sodium chromate, 4.0 mM electroosmotic flow modifier (OFM) hydroxide, 10 mM 2-(N-cyclohexylamino)ethanesulfonic acid and 0.1 mM calcium gluconate (pH 9.1). Major anions (Cl⁻, SO₄², PO₄H²⁻, and CO₃H⁻) were measured using hydrostatic injection (10 cm for 30 s) at 25°C. Trace amounts of anions (F⁻, Br⁻, and NO₃⁻) were better determined by electromigration injection (4 kV, 10 s) at 15°C. Good reproducibility of the migration times (<0.72% RSD), a satisfactory linear response and accuracy as well as acceptable detection limits were successfully obtained.     

Specific adsorption of halogen anions on hydrous γ-Al2O3

The paper reports results of a study on the specific adsorption of F⁻, Cl⁻, Br⁻, I⁻, ClO₃⁻, BrO₃⁻, IO₃⁻ and IO₄⁻ on hydrous γ-Al₂O₃. The isotherms of the anion adsorption and the adsorption dependencies on pH and the ionic strength of the solution have been determined under the equilibrium conditions. According to the degree of affinity to γ-Al₂O₃, the anions can be ordered as: I⁻3⁻−−3⁻3⁻4⁻−. It has been established that the sorption of IO₄⁻ and F⁻ involves the formation of surface complexes in the inner co-ordination sphere, whereas that of Cl⁻, Br⁻, I⁻, ClO₃⁻, BrO₃⁻ and IO₃⁻ takes place through formation of ion pair complexes in the outer co-ordination sphere. In the dynamic system, the exchange isoplanes and elution curves have been determined for selected anions on columns filled with Al₂O₃. It has been shown that γ-Al₂O₃ can be used for isolation and concentration of IO₃⁻ from natural waters in order to decrease the limit of the ions determination to 2 μg l⁻¹. Using differential pulse voltammetry (DPV), after isolation and concentration on γ-Al₂O₃, the content of iodates has been determined in mineral, marine and tap water doped with these ions.     

Vibronic and resonance Raman spectra of NO2impurity ions in the body-centered alkali halide crystals

The low-temperature resonance secondary radiation spectrum as well as the absorption and luminescence excitation spectra of NO₂⁻ impurity ions in cesium halides have been studied. The energy relaxation processes and NO₂⁻ equilibrium orientation and reorientation problems have also been discussed. It was shown that the systems under study were characterized by average Stokes' losses and strong lattice distortions, exemplified by the Generation of a number of low-frequency local and pseudolocal vibrations. The inhomogeneous broadening in CsCl-NO₂⁻ and CsI-NO₂⁻ spectra was extremely large for the simple molecular impurity systems, leading to the interesting peculiarities of energy relaxation processes. Unlike some alkali halide crystals with NaCl structure the impurity NO₂⁻ does not rotate in the lattices with CsCl structure. The NO₂⁻ equilibrium orientation in cesium halides was fixed: both the molecular axis and the axis perpendicular to the molecular plane were directed in (100) directions of the crystal.     

Using capillary electrophoresis to study the chemical conditions within cracks in aluminum alloys

The environment-assisted cracking (EAC) susceptibility of some aluminum alloys used for airplane structural components currently limits their use in the peak strength condition. Understanding the mechanism of EAC will facilitate the development of crack-resistant alloys with optimum mechanical properties. One component towards understanding the fundamental processes responsible for EAC is a comprehensive knowledge of the chemical conditions within cracks. The present work uses capillary electrophoresis (CE) to quantify the crack chemistry in order to provide insight into the nature of the mechanism controlling cracking. The highly restricted geometry of cracks in metals means that a crack typically contains less than 10 μl of solution. The high mass sensitivity combined with the inherently robust nature of CE makes it an ideal analytical technique for this application. Complicating factors in the accurate determination of the crack environment include high levels of sodium present from the test solution. Low sample volume and analyte matrix complexity necessitated the development of specific sampling, extraction and analysis methods. Analysis of the crack solutions in EAC-susceptible material revealed high levels of Al³⁺, Mg²⁺, Zn²⁺, and Cl⁻ near the crack tip. Cations arise from the anodic dissolution of the alloy, whereas chloride ingress from the external environment occurs to maintain solution electroneutrality within the crack. In contrast, EAC-resistant material exhibited significantly lower concentrations of dissolution products.     

Improvement of the performance of single-column ion chromatography by computerized detector signal processing and correlation chromatography

The performance of medium-quality ion chromatographic equipment was improved by using pseudo-random sample intoduction correlation chromatography (CC). The importance of the digital preprocessing of the detector signal prior to decorrelation was demonstrated for realization of the multiplex advantage of the CC method. The detection limits obtained for single-column ion chromatography using conductivity were 0.1, 0.12, and 0.17 ppm for Cl⁻, NO₃⁻ and SO₄²⁻ ions, respectively. Using the same apparatus without CC the detection limits are in the range 1–3 ppm.     

Spectrophotometric determination of nitrate and nitrite in soil and water samples with a diazotizable aromatic amine and coupling agent using column preconcentration on naphthalene supported with ion-pair of tetradecyldimethylbenzylammonium and iodide

Composite diazotization-coupling reagents containing sulfanilamide (SAM), sulfapyridine (SP) or sulfathiazole (ST) as the diazotizable aromatic amines and sodium 1-naphthol-4-sulfonate (NS) as the coupling agent using column preconcentration on naphthalene-tetradecyldimethylbenzylammonium(TDBA)-iodide adsorbent have been used for the spectrometric determination of trace nitrate and nitrite in soil and water samples. Nitrite ion reacts with SAM in the pH range 2.0–5.0, SP in the pH range 2.0–2.5 and ST in the pH range 2.0–3.3 in HCl medium to form water-soluble colourless diazonium cations. These cations were coupled with NS in the pH range 9.0–12.0 for the SAM system, 9.6–12.0 for the SP system and 8.5–12.0 for the ST system to be retained on naphthalene-TDBA-I material packed in a column. The solid mass is dissolved from the column with 5 ml of dimethylformamide and the absorbance is measured spectrometerically at 543 nm for SAM-NS, 533 nm for SP-NS and 535 nm for ST-NS. Nitrate is reduced to nitrite by a copper-coated cadmium reductor column and the nitrite is then treated with the diazotization-coupling reagent by column preconcentration. The absorbance due to the sum of nitrate and nitrite is measured and nitrate is determined by difference. The calibration graph was linear over the range 2–40 ng NO₂⁻-N ml⁻¹ and 1.5–30 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SAM and ST systems and 2–48 ng NO₂⁻-N ml⁻¹ and 1.5–36 ng NO₃⁻-N ml⁻¹ in aqueous samples for the SP system, respectively. The sensitivity, accuracy and precision of the systems decreased in the order STSAMSP. The detection limits were 1.4 ng NO₂⁻-N ml⁻¹ and 1.1 ng NO₃⁻-N ml⁻¹ for SAM, 1.6 ng NO₂⁻-N ml⁻¹ and 1.2 ng NO₃⁻-N ml⁻¹ for SP, and 1.0 ng NO₂⁻-N ml⁻¹ and 0.75 ng NO₃⁻-N ml⁻¹ for ST, respectively. The preconcentration factors are 8, 5 and 6 for SAM-NS, SP-NS and ST-NS, respectively. Interferences from various foreign ions have been studied and the methods have been applied to the determination of ng ml⁻¹ levels of nitrite and nitrate in soil and water samples. The mean recovery was 95–102% for all three systems.     

Simultaneous determination of bromide and nitrate in contaminated waters by ion chromatography using amperometry and absorbance detectors

This study describes a new ion chromatography method using a low-capacity anion exchange column with amperometric and absorbance detection for rapid and simultaneous determination of Br⁻ and NO₃⁻ in contaminated waters where one of these ions is present in excess compared to other. The use of two detectors overcomes the problem of baseline separation for Br⁻ and NO₃⁻ for accurate quantification, which was commonly encountered when using a low-capacity anion exchange column and suppressed conductivity detection mode. The method achieved accurate quantification of these two ions without requirement of baseline separation. The accuracy of 2.8% for NO₃⁻ was determined using a quality control sample obtained from UN GEMS/Water PE Study No. 6. The detection limits for Br⁻ and NO₃⁻ were 20 and 6 μg l⁻¹ (25 μl sample), respectively. Linearity of these two ions was over three orders of magnitude with a correlation coefficient >0.998. The influence of potential interfering ions was also studied followed by the determination of Br⁻ and NO₃⁻ in seawater, unsaturated zone water, soil extract and groundwater.     

Determination of nanomolar concentrations of phosphate in freshwaters using flow injection with luminol chemiluminescence detection

A simple and rapid flow injection (FI) method is reported for the determination of phosphate (as molybdate reactive P) in freshwaters based on luminol chemiluminescence (CL) detection. The molybdophosphoric heteropoly acid formed by phosphate and ammonium molybdate in acidic conditions generated chemiluminescence emission via the oxidation of luminol. The detection limit (3× standard deviation of blank) was 0.03 μg P l⁻¹ (1.0 nM), with a sample throughput of 180 h⁻¹. The calibration graph was linear over the range 0.032–3.26 μg P l⁻¹ (r²=0.9880) with relative standard deviations (n=4) in the range 1.2–4.7%. Interfering cations (Ca(II), Mg(II), Ni(II), Zn(II), Cu(II), Co(II), Fe(II) and Fe(III)) were removed by passing the sample through an in-line iminodiacetate chelating column. Silicate interference (at 5 mg Si l⁻¹) was effectively masked by the addition of tartaric acid and other common anions (Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻ and NO₂⁻) did not interfere at their maximum admissible concentrations in freshwaters. The method was applied to freshwater samples and the results (26.1±1.1–62.0±0.4 μg P l⁻¹) were not significantly different (P=0.05) from results obtained using a segmented flow analyser method with spectrophotometric detection (24.4±4.45–84.0±16.0 μg P l⁻¹).     

Ion chromatographic investigations of leachates from a hazardous-waste landfill

Leachates from different areas of a modern hazardous-waste landfill were investigated. In addition, samples of the waste to be buried were taken, and leachability tests in accordance with German standards were performed. The composition of the leachates from the landfill and the leachates produced by the leachability tests varied over a wide range, depending on the kind and volume of hazardous waste buried and the weather conditions. High concentrations of some anions were often found in combination with low concentrations of other anions. In the leachates the following concentration ranges were found: Cl⁻, 30–6000 mg/l; NO₂⁻, 0–150 mg/l; NO₂⁻, 0–150 mg/l; SO₂ ²⁻, 100–6000 mg/l. Therefore, several dilutions of one sample often had to be measured. The complex matrix often also requires several sample preparation steps for the elimination of interfering effects. Experience to date has shown that ion chromatography in this application field is efficient.     

Inhibition of positronium formation in aqueous solutions of mixed solutes: NO3 in Cd and in allylamine solutions

The ability of NO₃⁻ to inhibit positronium formation in the presence of Cd²⁺ and of allylamine in aqueous solutions is investigated and found to be the same as in plain NO₃⁻ solutions. The results are discussed on the basis of the spur model, with emphasis on the mechanisms at the origin of the limited inhibition. It is suggested that, in water, limited inhibition would arise from the selectivity of the solute to react with particles in different solvation states.     

Neutron diffraction studies of ions in aqueous solution

The effect of ions on the structure of water is discussed in terms of results for ionic hydration as derived from neutron diffraction isotopic substitution experiments. Results are presented for alkali ions (Li⁺, Na⁺ and K⁺), alkaline earth ions (Mg²⁺, Ca²⁺ and Sr²⁺) and for the anions Cl⁻, ClO⁻₄) and NO⁻₃, from which it is inferred that the water structure is disrupted more by cations with higher charge density.     

Analysis of explosives using electrospray ionization/ion mobility spectrometry (ESI/IMS)

The analysis of explosives with ion mobility spectrometry (IMS) directly from aqueous solutions was shown for the first time using an electrospray ionization technique. The IMS was operated in the negative mode at 250°C and coupled with a quadrupole mass spectrometer to identify the observed IMS peaks. The IMS response characteristics of trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), 2-amino-4,6-dinitrotoluene (2-ADNT), 4-nitrotoluene (4-NT), trinitrobenzene (TNB), cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), cyclo-tetramethylene-tetranitramine (HMX), dinitro-ethyleneglycol (EGDN) and nitroglycerine (NG) were investigated. Several breakdown products, predominantly NO₂⁻ and NO₃⁻, were observed in the low-mass region. Nevertheless, all compounds with the exception of NG produced at least one ion related to the intact molecule and could therefore be selectively detected. For RDX and HMX the [M+Cl⁻]⁻ cluster ion was the main peak and the signal intensities could be greatly enhanced by the addition of small amounts of sodium chloride to the sprayed solutions. The reduced mobility constants (K₀) were in good agreement with literature data obtained from experiments where the explosives were introduced into the IMS from the vapor phase. The detection limits were in the range of 15–190 μg l⁻¹ and all calibration curves showed good linearity. A mixture of TNT, RDX and HMX was used to demonstrate the high separation potential of the IMS system. Baseline separation of the three compounds was attained within a total analysis time of 6.4 s.