Regioselective synthesis of fused ring heterocyclic derivatives of ketene aminals and their biological activities

A regioselective and convenient methodology was developed to synthesize heterocyclic derivatives, bearing imidazole, piperidines, and azepines rings. The N-arylnitrones derived from 3-formylchromones were selected to react with heterocyclic ketene aminal to furnish the structurally attractive and pharmacologically important fused ring heterocycles. The N-arylnitrone moiety of 3-formylchromone was used to activate the formyl group for regioselective fused ring heterocycles synthesis, whereas, the effect of substituents at aryl functionality of nitrones were studied to improve the yield of target fused ring heterocyclic products. The synthesized compounds (10-12) were evaluated for their in vitro cytotoxic and antifungal influences. In cytotoxic (brine shrimp lethality) assay, compound 11e was found to be active with LD₅₀ = 4.1 × 10⁻⁶ μg/mL.     

Synthesis of Polynuclear Nonfused Azoles

Polynuclear blocks consisting of nonfused heterocycles of the azole series, connected through methylene bridges, were synthesized by successive addition of azole units via cycloaddition of organic azides to the triple bond of N-(2-propynyl)azoles, as well as via reaction of azide ion at the cyano group of cyanomethylazoles. Initial N-(2-propynyl)azoles were prepared by reaction of 2-propynyl bromide with 1,2,3-triazoles, benzotriazole, and tetrazoles; cyanomethylazoles were obtained by alkylation of azoles with chloroacetonitrile. An analogous scheme was used to add heterocyclic units to 2-phenyl-1,2,3-triazole-4-carbonitrile. In this case, the first two heterocyclic units are linked through the ring carbon atom.     

PdII‐Catalyzed Oxidative Tandem aza‐Wacker/Heck Cyclization for the Construction of Fused 5,6‐Bicyclic N,O‐Heterocycles

A Pd^II‐catalyzed oxidative tandem cyclization was developed for the construction of fused 5,6‐bicyclic N, O‐heterocycles. This reaction was enabled by the combined use of a 3‐methylpyridine ligand and pentafluorobenzoic acid additive. A range of heterocyclic products with different substituents could be prepared in moderate to good yields via this methodology. Several transformations, including a scaled‐up preparation of product 2 a , were also carried out showing the good applicability of our methodology.     

Thermodynamic characteristics of sorption of heterocyclic compounds m capillary gas chromatography

Dependences of sorption energies of sulfur-, oxygen-, and nitrogen-containing heterocyclic compounds on the nature of heteroatoms, structure of substituents and their position in the ring were studied. The contributions of heteroatoms, functional and alkyl groups to the energy of dispersive interaction of position isomers with nonpolar stationary phases were determined for imidazoles, piperidines, morpholines, thiomorpholines, dioxalanes, oxathiolanes, dithiolanes, thiophenes, and furans. The nonequivalence of contributions of the same substituents to the sorption energy of each of the heterocyclic compounds, depending on the nature of the heteroatom and position of the substituent, was shown. The obtained values of contributions of heteroatoms and substituents can be used for apriori calculation of retention indices of position isomers of five- and six-membered heterocycles containing one or two heteroatoms in the ring.Translated from lzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2033–2038, August, 1996.     

Dearomative Insertion of Fluoroalkyl Carbenes into Azoles Leading to Fluoroalkyl Heterocycles with a Quaternary Center

The skeletal ring expansion of heteroarenes through carbene insertion is gaining popularity in synthetic chemistry. Efficient strategies for heterocyclic ring expansion to access heterocycles containing a fluoroalkyl quaternary carbon center through fluoroalkyl carbene insertion are highly desirable because of their broad applications in medicinal chemistry. Herein, we report a general strategy for the dearomative one-carbon insertion of azoles using fluoroalkyl N-triftosylhydrazones as fluoroalkyl carbene precursors, resulting in ring-expanded heterocycles in excellent yields with good functional-group compatibility. The broad generality of this methodology in the late-stage diversification of pharmaceutically interesting bioactive molecules and versatile transformations of the products has been demonstrated.     

Reactions in the conjugated 'ene-ene-yne' manifold: five-membered ring fragmentation and ring formation via coarctate/pseudocoarctate mechanisms

The fragmentation of a 5-membered heteroaromatic ring to afford a conjugated ene-ene-yne skeleton, and the corresponding reverse process, cyclization of the hetero-ene-ene-yne motif to generate a variety of heterocyclic systems, are the subject of this review. These synthetically useful reactions, which proceed through a coarctate/pseudocoarctate mechanistic pathway, are unique in that they involve the generation of either a carbene or nitrene intermediate, and provide access to hard to obtain heterocyclic or ene-ene-yne structures. While fragmentation of heteroaromatic rings containing a exocyclic carbene or nitrene has been well documented in the literature for over 40 years, the use of hetero-ene-ene-yne precursors to synthesize heterocycles is a relatively new approach that is generating much interest in the literature. This review highlights both the synthetic and mechanistic aspects of these unique reactions.     

Solid-phase synthesis of 1,2,5-trisubstituted 4-imidazolidinones

An efficient method for the preparation of 1,2,5-trisubstituted 4-imidazolidinones is presented. The synthetic approach is based on the formation of an N-[1-(benzotriazol-1-yl)alkyl] moiety on the amino group of a MBHA resin-bound amino acid. The nucleophilic substitution of the benzotriazole group with an amidic nitrogen results in the formation of a five-membered imidazolidinone ring. The reaction is nonstereospecific and produces diastereomers in ratios that vary depending on the substituents on the ring. A variety of N-alpha-alkylated amino acids were cyclized with aromatic, aliphatic, and heterocyclic aldehydes to determine optimal reaction conditions and to select building blocks for the future preparation of a large, diverse range of individual trisubstituted imidazolidinones as well as a mixture-based combinatorial library.     

Polarography of heterocyclic compounds

The literature data on the principles of the electrochemical reduction of heteroethylene and heteroparaffin compounds (pyrazoline, diazepine, diaziridine, pyran, pyridazone, aziridine, oxaziridine, and other derivatives), cyclic anhydrides, imides, and hydrazides of acids on a dropping mercury electrode are correlated. In addition, the effect of substituents attached to the heterocyclic ring on the polarographic behavior of heterocycles is analyzed.     

Influence of protonation on the conformations of rigid-chain polymers

The conformations, internal rotation barriers, and the energies of bending deformation of molecules that model chain segments of the rigid-chain polymer poly(p-phenylenebenzobisoxazole) were calculated with the use of the AM1 semiempirical quantum-chemical method. The model molecules included several heterocycles and had a size larger than the repeat unit of the polymer, which includes one heterocyclic ring and one phenylene ring. For molecules in which all heterocyclic rings are diprotonated (at nitrogen atoms), the planar conformation is optimal (as in the case of uncharged molecules). At the same time, the internal rotation barriers in such molecules are reduced relative to the neutral molecules. However, when not all heterocycles are protonated in the molecule, the barriers turn out to be substantially higher than in the neutral molecule. For molecules in which all heterocycles are tetraprotonated, ab initio calculations of the optimal conformation were also performed. For these molecules, the conformation in which the phenyl rings and the heterocyclic rings are turned by almost 50° with respect to one another appeared to be optimal. In this case, the height of the rotation barriers is even lower than in molecules with diprotonated heterocycles. The protonation was found to have a weak effect on the bending rigidity of the poly(p-phenylenebezobisoxazole) chain.     

Synthesis of polycyclic benzofused nitrogen heterocycles via a tandem ynamide benzannulation/ring-closing metathesis strategy. Application in a formal total synthesis of (+)-FR900482

A two-stage "tandem strategy" for the synthesis of benzofused nitrogen heterocycles is described that is particularly useful for the construction of systems with a high level of substitution on the benzenoid ring. The first stage in the strategy involves a benzannulation based on the reaction of cyclobutenones with ynamides. This cascade process proceeds via a sequence of four pericyclic reactions and furnishes a multiply substituted aniline derivative which can bear a variety of functionalized substituents at the position ortho to the nitrogen. In the second stage of the tandem strategy, ring-closing metathesis generates the nitrogen heterocyclic ring. This two-step sequence provides efficient access to highly substituted dihydroquinolines, benzazepines, benzazocines, and related benzofused nitrogen heterocyclic systems. The application of this chemistry in a concise formal total synthesis of the anticancer agents (+)-FR900482 and (+)-FR66979 is described.     

Chemistry of Substituted Thiazinanes and Their Derivatives

Thiazinanes and its isomeric forms represent one of the most important heterocyclic compounds, and their derivatives represented a highly potent drug in disease treatment such as, 1,1-dioxido-1,2-thiazinan-1,6-naphthyridine, which has been shown to have anti-HIV activity by a mechanism that should work as anti-AIDS treatment, while (Z)-methyl 3-(naphthalen-1-ylimino)- 2-thia-4-azaspiro[5 5]undecane-4-carbodithioate showed analgesic activity, cephradine was used as antibiotic and chlormezanone was utilized as anticoagulants. All publications were interested in the chemistry of thiazine (partially or fully unsaturated heterocyclic six-membered ring containing nitrogen and sulfur), but no one was dealing with thiazinane itself which encouraged us to shed new light on these interesting heterocycles. This review was focused on the synthetic approaches of thiazinane derivatives and their chemical reactivity.     

Rapid access to amino-substituted quinoline, (di)benzofuran, and carbazole heterocycles through an aminobenzannulation reaction

The use of a powerful aminobenzannulation reaction has been applied for the synthesis of amino-substituted quinolines, dibenzofurans, and carbazoles. The precursors are heterocycles bearing a methyl ketone group ortho to an internal alkyne. They are commercially available or can be obtained in three to four classical and efficient reactions: Vilsmeier-Haack, Sonogashira (diversity point), Grignard, and Ley's oxidation. Upon aminobenzannulation reaction-classical conditions being pyrrolidine neat or in a solvent and 4 A MS-an interesting range of disubstituted quinolines, dibenzofurans, and carbazoles are obtained along with enamine formation in some cases. The reaction is useful since meta-substituted heterocycles are produced and also differs from classical heterocyclic methods which go through closure at the heteroatom-containing ring instead of benzene ring formation.     

Recent advances in iron(III) chloride catalyzed synthesis of heterocycles

Heterocyclic compounds particularly five, six and seven membered ring containing heterocycles are the most abundant which constitute a staggeringly diverse and important class of molecules that occur ubiquitously in a variety of synthetic drugs, bioactive natural products, pharmaceuticals and agrochemicals. Owing to the glorious past and impressive present of the biologically active heterocyclic scaffolds, these skeletons have long been a subject of immense interest. Hence, substantial efforts have been made to the development of new and innovative synthetic strategies for the synthesis of these heterocycles involving use of different metal catalysts, organic and inorganic reagents etc. Among the different types of metal catalysts used, iron catalysts are one of the cheap and easily available. In recent time, several new and innovative iron(III) chloride catalyzed synthesis of heterocycles with structural diversity are coming in the forefront of the literature by the scientific community. This review highlights the advancements made so far by iron(III) chloride for the synthesis of different assemblies of small heterocycles covering the year 2014–2018.     

A New Route to Substituted Pyrimido[5,4-e]-1,2,4-triazine-5,7(1H,6H)-diones and Facile Extension to 5,7(6H,8H) Isomers

A new route to substituted pyrimido[5,4-e]-1,2,4-triazine-5,7(1H,6H)-diones is outlined. The synthesis proceeds via pre-formed hydrazone intermediates, which are then condensed with an activated chlorouracil to build up the entire molecular framework, followed by a reductive ring closure to provide the parent series. The route has been extended to the isomeric pyrimido[5,4-e]-1,2,4-triazine-5,7(6H,8H)-dione class via the use of methylhydrazine as hydrazine surrogate, followed by regiospecific alkylation of the N(8)-H pyrimidotriazinediones with a range of alkyl and alkaryl substituents. This new methodology permits the generation of a wide range of compounds with variable substitution at the N(1), C(3), and N(8) positions for a heterocyclic scaffold with demonstrated pharmacological activity.     

Aminoacids in the synthesis of heterocyclic systems. The synthesis of methyl 2-acetylamino-3-dimethylaminopropenoate and 2-(N-methyl-N-trifluoroacetyl)amino-3-dimethylaminopropenoate and their application in the synthesis of heterocyclic compounds

Methyl (Z)-2-acetylamino-3-dimethylaminopropenoate (3) was prepared from N-acetylglycine (1), which was converted with N,N-dimethylformamide and phosphorus oxychloride into 4-dimethylaminomethylene-2-methyl-5(4H)-oxazolone (2), followed by treatment with methanol in the presence of potassium carbonate, into 3. The compound 3 was shown to be a versatile reagent in the synthesis of various heterocyclic systems. With N-nucleophiles, such as heterocyclic amines 4, either methyl 2-acetylamino-3-heteroarylaminopropenoates 5 or fused pyrimidinoncs 6 were formed, dependent on the reaction conditions and/or heterocyclic substituents: C-nuclcophiles with an active or potentially active methylene group, such as 1,3-dicarbonyl compounds 7, 8 and 9, substituted phenols 10a,b, naphthols 11, 12a-c, and substituted coumarin 13a, afforded substituted pyranones 20 and 22, and fused pyranones 21, 23–26. The nitrogen containing heterocycles 14–19 produced pyranoazines 27–31 and pyranoazole 32. In all of these systems the acetylamino group is attached at position 3 of the newly formed pyranone ring. The orientation around the double bond for methyl (Z)-2-(N-methyl-N-trifluo-roacetyl)-3-dimethylaminopropenoate (36) was established by X-ray analysis.     

DFT study of 1-, 4-, and 5-substituted 2-oxo-1,2,3,4-tetrahydropyrimidines: substituent steric and electronic effects,and ring flipping

Steric and the electronic effects caused by the substituents in the 1-, 4-, and 5-positions of substituted 2-oxo-1,2,3,4-tetrahydropyrimidines were investigated using density functional theory at the B3LYP/6-31++G(d,p) level. Results of this study show that the heterocyclic ring adopts a pseudo-boat conformation, in which the C₄ and N₁ atoms are deviated from ring planarity. The C₄-substituent occupies a pseudo-axial position and the space orientation of the substituent depends on the type and position of the additional substituent in this aryl group. The heights of the C₄ and N₁ atoms from the boat plane and the orientation of 5-CO moiety toward the heterocyclic ring depend on the electronic and steric effects of the substituents in the various positions. Ring flip calculations for 4-phenyl substituent explain the extreme steric effect caused by the substituent in the 1-position. These calculations indicate the more favored pseudo-axial orientation of the phenyl group over the equatorial orientation.     

Photochemistry of hydrogen bonded heterocycles probed by photodissociation experiments and ab initio methods

In this perspective article, we focus on the photochemistry of five-membered nitrogen containing heterocycles (pyrrole, imidazole and pyrazole) in clusters. These heterocycles represent paradigmatic structures for larger biologically active heterocyclic molecules and complexes. The dimers of the three molecules are also archetypes of different bonding patterns: N-H···π interaction, N-H···N hydrogen bond and double hydrogen bond. We briefly review available data on photochemistry of the title molecules in the gas phase, but primarily we focus on the new reaction channels opened upon the complexation with other heterocycles or solvent molecules. Based on ab initio calculations we discuss various possible reactions in the excited states of the clusters: (1) hydrogen dissociation, (2) hydrogen transfer between the heterocyclic units, (3) molecular ring distortion, and (4) coupled electron-proton transfer. The increasing photostability with complexity of the system can be inferred from experiments with photodissociation in these clusters. A unified view on photoinduced processes in five-membered N-heterocycles is provided. We show that even though different deactivation channels are energetically possible for the complexed heterocycles, in most cases the major result is a fast reconstruction of the ground state. The complexed or solvated heterocycles are thus inherently photostable although the stability can in principle be achieved via different reaction routes.     

Cobalt-catalyzed C–N,C–O,C–S bond formation: synthesis of heterocycles

In recent decades, a large number of reports related to the synthesis of N-, O- and S-containing heterocycles have appeared owing to a wide variety of their biological activity. Traditional approaches require expensive or highly specialized equipment or would be of limited use to the synthetic organic chemist due to their highly inconvenient approaches. New strategies have been developed for the preparation of heterocycles in the last decades. Metal and non-metal catalysts are used in organic reactions with high activity. These synthetic strategies are becoming important and highly rewarding protocols in organic synthesis. In this review article, the synthesis of heterocycles is presented with the application of cobalt metal as a catalyst. It describes the formation of different sized heterocyclic rings containing different heteroatoms.

     

Phenoxydifluoromethyl substituted nitrogen heterocycles. Synthesis and heterocyclization reactions of ethyl 4,4-difluoro- 4-phenoxyacetoacetate

Ethyl 4,4-difluoro-4-phenoxyacetoacetate was obtained and studied as a precursor to new heterocyclic compounds. 6-Hydroxypyrimidine, 1,3-dihydro-1,5- benzodiazepin-2-one, quinolin-2-one and 6-hydroxypyrazolo[3,4-b]pyridine derivatives containing phenoxydifluoromethyl groups were synthesized. These results make it possible to introduce aryloxydifluoromethyl substituents for the design of biologically active heterocycles.     

Voltammetric oxidation of 2-oxo-1,2,3,4-tetrahydropyrimidin-5-carboxamides: substituent effects

Electrochemical oxidation of a series of 20 substituted 2-oxo-1,2,3,4-tetrahydropyrimidin-5-carboxamides (THPMs) in acetonitrile has been studied using voltammetric methods at a glassy carbon electrode to investigate the influence of the substituents on the 4- and 5-positions of the heterocyclic ring. Analysis of the results shows that the electronic nature and steric hindrance of the substituents, especially their orientations toward the heterocyclic ring, determine their effects on the oxidation potential. Analysis of the computational results obtained at the DFT-B3LYP/6-31++G** level of theory suggests a mechanism in which the first electron removal occurs from either the N(1) of the heterocyclic ring or N(17) of the amide substitution. This process is followed by a fast proton removal resulting in the formation of stable allylic and/or benzylic radicals which then undergo further oxidation to the 2-oxo-1,2-dihydropyrimidin-5-carboxamides (DHPMs).