Production of a positron microprobe using a transmission remoderator.

A production method for a positron microprobe using a beta+-decay radioisotope (22Na) source has been investigated. When a magnetically guided positron beam was extracted from the magnetic field, the combination of an extraction coil and a magnetic lens enabled us to focus the positron beam by a factor of 10 and to achieve a high transport efficiency (71%). A 150-nm-thick Ni(100) thin film was mounted at the focal point of the magnetic lens and was used as a remoderator for brightness enhancement in a transmission geometry. The remoderated positrons were accelerated by an electrostatic lens and focused on the target by an objective magnetic lens. As a result, a 4-mm-diameter positron beam could be transformed into a microprobe of 60 microm or less with 4.2% total efficiency. The S parameter profile obtained by a single-line scan of a test specimen coincided well with the defect distribution. This technique for a positron microprobe is available to an accelerator-based high-intensity positron source and allows 3-dimensional vacancy-type defect analysis and a positron source for a transmission positron microscope.     

Design of a portable gas chromatography with a conducting polymer nanocomposite detector device and a method to analyze a gas mixture

A portable chromatography device and a method were developed to analyze a gas mixture. The device comprises a chromatographic column for separating components of a sample of the gas mixture. It has an air pump coupled to the inlet of a chromatographic column for pumping air and an injector coupled to the inlet of chromatographic column for feeding the sample using the air as a carrier gas. A detector is arranged downstream from and coupled to the outlet of the chromatographic column. The detector is a nanostructure semiconductive microfiber. The device further comprises an evaluation unit arranged and configured to evaluate each detected component to determine the concentration. The designed portable system was used for simultaneous detection of amines. The possibility of applying dispersive liquid–liquid microextraction for the determination of analytes in trace levels is demonstrated. The reproducibility of this method is acceptable, and good standard deviations were obtained. The relative standard deviation value is less than 6% for all analytes. Finally, the method was successfully applied to the extraction and determination of analytes in water samples.     

Motion of a drop on a solid surface due to a wettability gradient

The hydrodynamic force experienced by a spherical-cap drop moving on a solid surface is obtained from two approximate analytical solutions and used to predict the quasi-steady speed of the drop in a wettability gradient. One solution is based on approximation of the shape of the drop as a collection of wedges, and the other is based on lubrication theory. Also, asymptotic results from both approximations for small contact angles, as well as an asymptotic result from lubrication theory that is good when the length scale of the drop is large compared with the slip length, are given. The results for the hydrodynamic force also can be used to predict the quasi-steady speed of a drop sliding down an incline.     

Scaling analysis of coating of a plate or a fiber

The problem of coating a plate or a fiber through their withdrawal from a large reservoir was treated in the literature in various limiting cases. In the present paper, interpolation expressions are derived by scaling for Newtonian, Bingham, and viscoelastic fluids. The scaling analysis was also employed to explain the sharp increase in film thickness produced by inertia and the occurrence of a maximum thickness for an optimum velocity. It is also shown that, for a viscoelastic fluid, the film thickness tends to a finite value at very large withdrawal rates. An explanation is also provided for the existence of a maximum film thickness for an optimum surfactant concentration.     

Taming Mars with a tent and a tunnel: creation of a biosphere-city

An unconventional site-specific outdoor utility sculpture, used as a Strait of Gibraltar stopper, may soon store unwanted Earth-atmosphere derived wastes (mineralized CO2 and CFCs) for hundreds of years. Such a Land Art processing facility, an anti-global warming/cooling antidote, is an appropriate macro-engineering response to allegedly impending human survival macro-problems.     

Oxidation of a two-dimensional hexagonal boron nitride monolayer: a first-principles study

Two-dimensional (2D) hexagonal boron-nitride oxide (h-BNO) is a structural analogue of graphene oxide. Motivated by recent experimental studies of graphene oxide, we have investigated the chemical oxidation of 2D h-BN sheet and the associated electronic properties of h-BNO. Particular emphasis has been placed on the most favorable site(s) for chemisorption of atomic oxygen, and on the migration barrier for an oxygen atom hopping to the top, bridge, or hollow site on the h-BN surface, as well as the most likely pathway for the dissociation of an oxygen molecule on the h-BN surface. We find that when an oxygen atom migrates on the h-BN surface, it is most likely to be over an N atom, but confined by three neighbor B atoms (forming a triangle ring). In general, chemisorption of an oxygen atom will stretch the B-N bond, and under certain conditions may even break the B-N bond. Depending on the initial location of the first chemisorbed O atom, subsequent oxidation tends to form an O domain or O chain on the h-BN sheet. The latter may lead to a synthetic strategy for the unzipping of the h-BN sheet along a zigzag direction. A better understanding of the oxidation of h-BN sheet has important implications for tailoring the properties of the h-BN sheet for applications.     

Construction of a protein-detection system using a loop peptide library with a fluorescence label

Construction of a novel protein-detection system was carried out using a designed peptide library with fluorescent labels based on loop structures. As a basic model study, detection of alpha-amylase using fluorescent-labeled peptides derived from an active loop of tendamistat was examined. The detection methods for proteins with immobilized peptides as well as peptides in solution have been successfully established. Based on these results, a loop peptide library that has various turn sequences grafted on a stable loop structure has been constructed. Various proteins with recognition patterns corresponding, for instance, to "protein fingerprints" could be detected using an immobilized peptide library. The present results suggest that the system can be applied to the development of a peptide microarray that behaves as a protein chip.     

Study of a transferred-arc plasma reactor with a converging wall and flow through a hollow cathode

In this paper the behavior of an arc in a transferred-arc plasma reactor with a converging wall geornetrr and flow through a hollow cathode is investigated numerically with emphasis on the fluid dynamics. The general conservation equations and auxiliary relations for the calculation domain are established based on reasonable assumptions Then, the coupled nonlinear differential equations are solved with suitable boundary conditions and temperature-dependent argon plasma properties at atmospheric pressure, by employing an efficient finite-difference method. The results, for a hollow cathode geornetrr with low injection flow rates, clear/y demonstrate the existence of the Maecker elect which is responsible Joy the formation of two recirculation zones. As the plasma gas flow rate is increased, the downstream recirculation zoner is swept away leaving only an upstream recirculation zone.     

Mapping a homopolymer onto a model fluid

We describe a linear homopolymer using a grand canonical ensemble formalism, a statistical representation that is very convenient for formal manipulations. We investigate the properties of a system where only next neighbor interactions and an external, confining, field are present and then show how a general pair interaction can be introduced perturbatively, making use of a Mayer expansion. Through a diagrammatic analysis, we shall show how constitutive equations derived for the polymeric system are equivalent to the Ornstein-Zernike and Percus-Yevick equations for a simple fluid and find the implications of such a mapping for the simple situation of Van der Waals mean field model for the fluid.     

An efficient synthesis of pyrroles by a one-pot, three-component condensation of a carbonyl compound, an amine and a nitroalkene in a molten ammonium salt

A one-pot, three-component condensation of a carbonyl compound, an amine and a nitroalkene leading to an efficient synthesis of alkyl-substituted pyrroles has been carried out in molten tetrabutylammonium bromide. Neither a catalyst nor an organic solvent is required for this reaction and the molten ammonium salt is recyclable.     

PHOTOSENSITIZING PROPERTIES OF BACTERIOCHLOROPHYLLIN a and BACTERIOCHLORIN a, TWO DERIVATIVES OF BACTERIOCHLOROPHYLL a

Abstract The photosensitizing properties of two water soluble derivatives of bacteriochlorophyll a , bacteriochlorophyllin a and bacteriochlorin a (lacking the central Mg-ion) were investigated and compared to those of hematoporphyrin derivatives. At physiological pH the oxygen consumption rate of histidine, tryptophan, dithiothreitol and guanosine upon illumination was 3 to 4 times higher when bacteriochlorin a was used as photosensitizer than when hematoporphyrin derivatives were used. Especially bacteriochlorin a proved to be an effective sensitizer for the killing of L929 cells. Because bacteriochlorin a has an absorption maximum at 765 nm in phosphate buffered saline (allowing a light penetration in tissue about ten times larger than at 630 nm) and a high molar absorption coefficient (32 000 M cm⁻¹) it has promising possibilities for the application in photodynamic therapy.     

Binding of glycopeptide antibiotics to a model of a vancomycin-resistant bacterium

BACKGROUND: The vancomycin group of glycopeptide antibiotics is active against a wide range of gram-positive bacteria. The increasing resistance to vancomycin is the result of a change of an amide linkage (D-Ala-D-Ala) to an ester linkage (D-Ala-D-Lactate) in the bacterial cell-wall precursors. RESULTS: We have used a peptide terminating in the sequence -Lys-D-Ala-D-Lactate linked by its amino terminus to a docosanoyl (C22) acyl chain and anchored in a supported lipid monolayer to mimic the surface of vancomycin-resistant enterococci. Surface plasmon resonance analysis was then used to investigate the binding of glycopeptide group antibiotics to this surface. Vancomycin, which dimerises weakly, bound with low affinity, whereas strongly dimerising antibiotics, such as chloroeremomycin, bound with higher affinities. Antibiotics that have attached hydrophobic groups, such as teicoplanin and biphenylchloroeremomycin (LY307599), bound to the lipid monolayer. This resulted in an enhanced affinity for the lipid-anchored peptide at the surface relative to affinities for an analogous non-anchored peptide in solution. CONCLUSIONS: We have shown that the affinities of glycopeptide antibiotics for a model of the surface of a vancomycin-resistant bacterium are enhanced relative to affinities determined in free solution. We have also shown that antibiotics that have membrane anchors bind tightly to the model surface and that this feature is an important determinant of the ability of an antibiotic to kill vancomycin-resistant enterococci.     

Heat transfer to a single particle exposed to a thermal plasma

This paper is concerned with an analytical study of the heat and mass transfer process of a single particle exposed to a thermal plasma, with emphasis on the effects which evaporation imposes on heat transfer from the plasma to the particle. The results refer mainly to an atmospheric-pressure argon plasma and, for comparison purposes, an argon-hydrogen mixture and a nitrogen plasma are also considered in a temperature range from 3000 to 16,000 K. Interactions with water droplets, alumina, tungsten, and graphite particles are considered in a range of small Reynolds numbers typical for plasma processing of fine powders. Comparisons between exact solutions of the governing equations and approximate solutions indicate the parameter range for which approximate solutions are valid. The time required for complete evaporation of a given particle can be determined from calculated values of the vaporization constant. This constant is mainly determined by the boiling (or sublimation) temperature of the particles and the density of the condensed phase. Evaporation severely reduces heat transfer to a particle and, in general, this effect is more pronounced for materials with low latent heat of evaporation.     

Staudinger ligation: a peptide from a thioester and azide

[reaction: see text] The technique of native chemical ligation enables the total chemical synthesis of proteins. This method is limited, however, by an absolute requirement for a cysteine residue at the ligation juncture. Here, this restriction is overcome with a new chemical ligation method in which a phosphinobenzenethiol is used to link a thioester and azide. The product is an amide with no residual atoms.     

Electrokinetic concentration enrichment within a microfluidic device using a hydrogel microplug

A simple and efficient approach for concentration of charged molecules in microfluidic devices is described. The functional component of the system is a hydrogel microplug photopolymerized within the main channel of a microfluidic device. When an appropriately biased voltage is applied across the hydrogel, charged analyte molecules move from the source well toward the hydrogel. Transport of the analyte through the hydrogel is slow compared to its velocity in the microfluidic channel, however, and therefore it concentrates at the hydrogel/solution interface. For an uncharged hydrogel, a bias of 100 V leads to a approximately 500-fold enrichment of the DNA concentration within 150 s, while the same conditions result in an enrichment of only 50-fold for fluorescein. Somewhat lower enrichment factors are observed when a negatively charged hydrogel is used. A qualitative model is proposed to account for the observed behavior.     

The uncertainty of a result from a linear calibration

The standard error of a result obtained from a straight line calibration is given by a well known ISO-endorsed expression. Its derivation and use are explained and the approach is extended for any function that is linear in the coefficients, with an example of a weighted quadratic calibration in ICPAES. When calculating the standard error of an estimate, if QC data is available it is recommended to use the repeatability of the instrumental response, rather than the standard error of the regression, in the equation.     

Polarization Dependence of a Hydrophobized Electrode for Electrosynthesis of a Soluble Product

An equation for a polarization curve of a hydrophobized electrode is proposed for electrosynthesis of a soluble electroactive product in an inner-kinetic mode. The equation contains the concentration of the target product (TP) in an explicit form. The shape of the curve depends on the biquadratic root of the TP concentration and the square root of the ratio between exchange currents of the side and target reactions.     

A m-benzyne to o-benzyne conversion through a 1,2-shift of a phenyl group

Pyrolysis of two differently labeled versions of 3-phenylphthalic anhydride shows that a m-benzyne can form the related o-benzyne through shift of a phenyl group. The highest energy point in the process is the transition structure for a reverse carbon-hydrogen insertion in an intermediate benzopentalene. With the minor addition of an intermediate alkyne formed through a Roger Brown rearrangement, the original mechanism for formation of acenaphthalene accommodates the labeling results.