Multimonomer and cross-linked polymers formed by its copolymerization

Differential scanning calorimetry (DSC) and thermogravimetry (TG) were used to examine the thermal behavior of the multimonomer poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) within the temperature range from -80 to 400°C. DSC measurements indicated that the polymer side chains were able to crystallize in paraffinic phase. PUDEM, added to methyl methacrylate (MM), can effectively copolymerize with essentially no homopolymer produced as shown by DSC (single T _g). The value of T _g depends on the PUDEM content, degree of cross-linking and the presence of free MM in the cross-linked product. This revised version was published online in August 2006 with corrections to the Cover Date.     

Differential scanning calorimetry (DSC) analysis of human plasma in different psoriasis stages

Psoriasis vulgaris is a chronic autoimmune, inflammatory and proliferative skin disease. Recently, there is a need for new methods to detect and to monitor this dermatological syndrome at any stage. The application of differential scanning calorimetry (DSC) should be as a new diagnostic method for psoriasis detection and monitoring using human plasma. We aimed to detect blood plasma components with DSC in psoriasis patients. The study included 18 white adults (eight men and ten women; median age 55.7 years) who had underwent a full skin examination for psoriasis. According to the psoriasis area severity index (PASI) we selected them into three groups: PASI: 0 (symptomless), PASI: 1–6 (minimal symptoms), PASI: >7 (symptoms). According to medical treatment human blood plasma samples were collected from healthy controls, patients without or with therapy, and were analyzed by DSC technique. In this preliminary study we observed that thermal changes (T _m, calorimetric enthalpy) in blood plasma showed closed correlation with psoriasis severity and medical treatment. Further studies are needed to elucidate these relationships, but our application of the DSC method has provided a potential new tool for the early diagnosis and monitoring of psoriasis patients.     

Prednisone/Cyclodextrin Inclusion Complexation: Phase Solubility,Thermodynamic, Physicochemical and Computational Analysis

Guest–host interaction of prednisone (PN) with cyclodextrins (CDs) have been investigated using phase solubility diagrams (PSD), differential scanning calorimetry (DSC), X-ray powder diffractometry (XRPD), scanning electron microscopy (SEM) and molecular mechanical modeling (MM). Estimates of the complex formation constant (K ₁₁) show that the tendency of PN to complex with CDs follows the order: β-CD>γ-CD>HP-β-CD>α-CD. At the same pH of 7.0, β-CD forms soluble 1:1 and insoluble 1:2 PN/CD complexes (B_S-type PSDs). The thermodynamic functions for 1:1 PN/β-CD estimated at pH = 7.0 (ΔG ₁₁^o=−20.8 kJ⋅mol⁻¹) show that complexation is driven by enthalpy (−30.7 kJ⋅mol⁻¹) but retarded by entropy (ΔS ₁₁^o=−33.1 J⋅mol⁻¹⋅K⁻¹) changes. The MM modeling study indicates the formation of different isomeric 1:1 complexes with CDs. PSD, DSC, XRPD, SEM and MM studies established the formation of inclusion complexes in solution and the solid state.     

Calorimetric study of cross-linking polymerization of methyl methacrylate in the presence of a multimonomer

The kinetics of free-radical cross-linking polymerization of methyl methacrylate (MM) in the presence of poly[2-(10-undecenoyloxy)ethyl methacrylate] (PUDEM) as a macromolecular cross-linker has been isothermally examined within the temperature range from 85–100°C using the differential scanning calorimetry (DSC). The activation energy found for this reaction, E _a=89.3 kJ mol^–1, exceeds slightly the literature values of activation energy obtained for the mass polymerization of MM without any cross-linking agent. The activation energy has been also determined by the isoconversion method. It has been found that E _a decreases with the increase in the conversion, which may indicate a change in the reaction mechanism.This work was partly supported by the Committee for Research (KBN) in the framework of project No. 7 T08E 026 20     

CPMD/GULP QM/MM interface for modeling periodic solids: Implementation and its application in the study of Y‐zeolite supported Rhn clusters

We report here the development of hybrid quantum mechanics/molecular mechanics (QM/MM) interface between the plane‐wave density functional theory based CPMD code and the empirical force‐field based GULP code for modeling periodic solids and surfaces. The hybrid QM/MM interface is based on the electrostatic coupling between QM and MM regions. The interface is designed for carrying out full relaxation of all the QM and MM atoms during geometry optimizations and molecular dynamics simulations, including the boundary atoms. Both Born–Oppenheimer and Car–Parrinello molecular dynamics schemes are enabled for the QM part during the QM/MM calculations. This interface has the advantage of parallelization of both the programs such that the QM and MM force evaluations can be carried out in parallel to model large systems. The interface program is first validated for total energy conservation and parallel scaling performance is benchmarked. Oxygen vacancy in α‐cristobalite is then studied in detail and the results are compared with a fully QM calculation and experimental data. Subsequently, we use our implementation to investigate the structure of rhodium cluster (Rh_n; n = 2 to 6) formed from Rh(C₂H₄)₂ complex adsorbed within a cavity of Y‐zeolite in a reducible atmosphere of H₂ gas. © 2016 Wiley Periodicals, Inc.     

Study of Very Low Temperature Crystallization Process in Ethylene/α-Olefin Copolymers

Summary: The crystallization behavior of Ziegler-Natta (ZN) and single site (SS) based ethylene/1-butene and ethylene/1-hexene copolymers and SS copolymer fractionated by composition and molar mass (MM) has been studied by differential scanning calorimetry. It was observed that in addition to the high temperature crystallization peak (HTCP), and for ZN copolymers in addition also to low temperature crystallization peak (LTCP), a very-low temperature crystallization peak (VLTCP) is present at temperatures in between 60–75 °C. Peak temperature of VLTCP, T_VLTCP, decreases with increasing comonomer content (C_comon) at fixed MM. If C_comon is kept approximately constant, T_VLTCP increases with increasing MM. It turns out that T_VLTCP does not depend on the type of catalyst used. The degree of crystallinity calculated from the VLTCP is independent of the chemical nature of the comonomers present, but slightly changes with C_comon. It also steeply increases with MM and levels off at MM around 50 kg/mol. It was found that the crystallinity as related to the area of the VLTCP is catalyst type dependent, and is higher for the SS catalyst used compared to the ZN catalyst.     

DSC measurements of blood plasma on patients with chronic pancreatitis and operable and inoperable pancreatic adenocarcinoma

Currently, the most examinations and markers are of limited diagnostic and prognostic value in chronic inflammation of the pancreas and its malignant tumorous disease. The purpose of this pilot study was to measure thermal changes of blood plasma by differential scanning calorimetry (DSC) method on patients with chronic pancreatitis, and with operable or inoperable pancreatic adenocarcinoma. The study involved chronic pancreatitis patients (n = 5), in whom had to perform surgery due to any complications. In malignant pancreatic cancer group, according to resectability of the tumors, patients were divided into operable (curative R0 resection, n = 11) and inoperable (palliative double bypass, n = 5) subgroups. Peripheral blood samples were collected from the patients preoperatively and from healthy controls (n = 5). Denaturation of plasma components was detected in Setaram Micro DSC-II calorimeter. DSC results showed decrease of T _m1 (48.8 °C) and T _m2 (61.8 °C) and increase of T _m3 (68 °C) in chronic pancreatitis group compared to healthy controls (56.2, 63.1 and 68 °C). Similar tendencies were in patients with operable (48.2, 61.5, 67.6 °C) and inoperable (48.1, 62.4, 69 °C) pancreas adenocarcinoma. Calorimetric enthalpy mildly decreased in each group except for operable group (1.3 J g^?1 ?H) compared to controls (1.2 J g^?1 ?H). This research confirmed that DSC parameters of blood plasma on patients with chronic pancreatitis and pancreatic adenocarcinoma are clearly distinct from thermodynamical data of healthy controls. After better validation of calorimetric data, it can be a noninvasive tool for diagnostic and monitoring of pancreatic diseases.     

Probing the anomeric effect. The diaminomethylene group: Calculations of N?C?N-containing molecular systems1

A study of systems containing the title moiety is described, with special reference to the anomeric effect. We have calculated ab initio, using Gaussian-80 with the 3-21G basis set, all basic conformations of methylene-diamine (H₂N? CH₂? NH₂) and its N-methyl derivative with full geometry optimization of energy minima and barriers. The structural data thus obtained, were then employed to parameterize Allinger's MM2-80 force field in a procedure similar to that described for oxygen derivatives, including hydrogen-bonding effects and C? N bond shortening in tertiary amines. This modification, termed MM2-AE was then used to calculate larger molecules, including N,N′-di- and N,N,N′,N′-tetramethyl-methylenediamine, various 1,3-diazane systems, and 1,4,5,8-tetraazadecalin derivatives of established (x-ray) structures. The results are discussed in light of their verificative and predictive power and appear to validate MM2-AE as a useful computational procedure.     

Influence of oxidative injury and monitoring of blood plasma by DSC on breast cancer patients

Damage caused by oxidative stress is involved in many types of diseases, including breast cancer. Our aim was to detect the oxidative stress parameters and blood plasma changes with differential scanning calorimetry (DSC) in breast cancer patients. The study included 40 adult breast cancer women who were grouped according to tumor diameter, regional lymph node metastases, proliferative activity, receptor status and postoperative chemotherapy. To monitor oxidative stress, malondialdehyde, oxygen free radicals (OFRs), activity of myeloperoxidase (MPO), superoxide dismutase (SOD) and catalase (CAT) were measured. Denaturation of plasma components was detected in Setaram Micro DSC-II calorimeter. The total production of OFRs, the MPO activity and lipidperoxidation were significantly increased in each breast cancer patients considering the tumor size, the metastatic lymph nodes, the proliferation activity and receptor status compared with healthy controls (p < 0.05). These pro-oxidants were slightly elevated without chemotherapy, but their values were increased significantly in chemotherapy-receiving group. The activity of SOD and CAT was significantly decreased in all groups, and in regard to the chemotherapy, they were changed significantly parallel to the severity of disease. Regarding to both the increased tumor diameter and the increased number of affected lymph nodes, DSC measurements showed a strong relationship between the maximum excess heat capacity (C_pmax) of the blood plasma and the severity of disease. The study demonstrated that oxidative stress is implicated in breast carcinoma and chemotherapy aggravates these changes which confirmed the plasma DSC measurements also.     

Calorimetric and spectroscopic studies characterization of newborn rat’ blood serum after maternal administration of cyclophosphamide

Differential scanning microcalorimetry (DSC) and UV–VIS absorption spectroscopy were used to obtain the characteristics of blood serum from newborn rat’ after maternal treatment with cyclophosphamide in comparison with control. The obtained DSC curves reveal a complex endothermic peak due to the unfolding process of various serum proteins. Thermal profiles and absorption spectra of blood serum are sensitive to the age of newborns as well as to effect of maternal administration of cyclophosphamide. The most significant disturbances in serum proteome were observed for 14-day old newborns. The thermodynamic parameters: enthalpy change (∆H), the normalized first moment (M₁) of the thermal transition with respect to the temperature axis and the ratio of C _p^ex at 70 and 60 °C describing denaturation contributions of globulin forms in respect to unliganded albumin with haptoglobin was estimated. Moreover, the second derivative spectroscopy in the UV region was used to resolve the complex protein spectrum. The differences in blood serum detected by DSC and UV–VIS confirm a potential usefulness of these methods for diagnostic and monitoring changes with age as well as the pathological state of blood serum.     

Challenge and Solution of Characterizing Glass Transition Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers highly depend on their glass transition temperature (T _g). Differential scanning calorimetry (DSC) is commonly used to measure T _g of polymers. However, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T _g in such type of polymers. The changes in specific heat capacity (Δc _p) at T _g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δc _p from flexible polymer (0.28 J g^?1 K^?1 for polystyrene) to rigid CPs (10^?3 J g^?1 K^?1 for a naphthalene diimide‐based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δc _p at T _g by a factor of 10, confirming that backbone rigidity reduces the Δc _p. Additionally, an increase in the crystalline fraction of the CPs further reduces Δc _p. We conclude that the difficulties of determining T _g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D‐A CPs with weak transition signals. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1635–1644     

Conformational energies and rotational barriers in 3-methyl-1-butene and 1-butene: An ab initio and molecular mechanics study

The calculated result obtained with MM2(87) for the rotation of the isopropyl group in 3-methyl-1-butene is not in agreement with experimental data. In order to reparametrize the C_sp2-C_sp3-C_sp-C_sp3 torsional angle, 3-methyl-1-butene and 1-butene have been studied by molecular mechanics (MM2(87)) and ab initio (MP2/6-31G* and MP3/6-31G*) calculations. The reparametrization of the torsional angle gives calculated results from MM2(87) in agreement with experimental data and ab initio calculations for both 3-methyl-1-butene and 1-butene. The calculated barriers for the rotation of alkyl groups in alkylbenzenes are improved with these new parameters.     

Theoretical study on the hydration of hydrogen peroxide in terms of ab initio method and atom-bond electronegativity equalization method fused into molecular mechanics

In this paper, the interaction between hydrogen peroxide (HP) and water were systemically studied by atom-bond electronegativity equalization method fused into molecular mechanics (ABEEM/MM) and ab initio method. The results show that the optimized geometries, interaction energies and dipole moments of hydrated HP clusters HP(H₂O) _n (n = 1–6) calculated by ABEEM/MM model are fairly consistent with the MP2/aug-cc-pVTZ//MP2/aug-cc-pVDZ results. The ABEEM/MM results indicate that n = 4 is the transition state structure from 2D planar structure to 3D network structure. The variations of the average hydrogen bond length with the increasing number of water molecules given by ABEEM/MM model agree well with those of ab initio studies. Moreover, the radial distribution functions (RDFs) of water molecule around HP in HP aqueous solution have been analyzed in detail. It can be confirmed that HP is a good proton donor and poor proton acceptor in aqueous solution by analysis of the RDFs.     

High-performance liquid chromatography (HPLC)-size exclusion chromatography (SEC) for qualitative detection of humic substances and dissolved organic matter in mineral soils and peats in Lithuania

High-performance liquid chromatography (HPLC) with size exclusion (SEC) separation function was used to isolate and examine the molecular mass (MM) distributions and polydispersity of humic substances (HSs) and dissolved organic matter (DOM) from mineral soils and peats. The aim was to improve their detailed characterisation and to inform of their soil carbon (C) sequestration and environmental quality. This is the first study conducted in Lithuania in which HSs and DOM, separated from two soil types, have been used to characterise soil at the molecular level. The HPLC-SEC, as a separation method, was coupled with diode-array detection (DAD), thus enabling the separation of molecular fractions. Results showed that HPLC-SEC can be used to determine the MM of HSs in soil, provided that the relation between retention time and MM is known and a suitable method for fitting the HS peak is available. The UV-spectra analysis showed that DOM has a larger MM (M_w = 2439–3436 Da), which contains more aliphatic C. The HS fraction has a smaller MM (M_w = 2776 Da), with aromatic structures that reflect a higher aromaticity. Separated fractions had characteristic MMs of humic acid (HA) and fulvic acid (FA) and DOM. The HSs separated from peat samples were characterised by higher aromaticity, humification and stability. The HSs extracted from mineral soil samples showed a higher degradability level. The results also show the MM distribution and polydispersity of HS and DOM fractions (M_w/M_n = 1.009–1.252) are relatively homogenous in both soil types. Findings confirm that chromatographic and spectrometric parameters can be used for characterisation of both HSs and DOM, and for detecting changes in organic matter quality. Moreover, they can also be used for a further understanding the C-cycle and could be applied for enhancing soil C-sequestration and informing environmental quality management.     

Influence of oxidative injury and monitoring of blood plasma by DSC on patients with psoriasis

Oxidative stress induced by oxygen free radicals (OFRs) is a casual factor in psoriasis. Our aim was to detect the oxidative stress parameters and blood plasma changes with differential scanning calorimetry (DSC) in psoriatic patients. The study included untreated (n = 39) and treated (retinoids, methotrexate, biologic response modifiers; n = 33) white adult patients from both sex. To monitor oxidative stress concentration of malondialdehyde (MDA), reduced glutathione and sulfhydryl groups, production of OFRs, and activity of myeloperoxidase (MPO), superoxide dismutase, and catalase were measured. Denaturation of plasma components was detected in SETARAM Micro DSC-II calorimeter. Total production of OFRs and MPO activity, and the concentration of MDA were significantly increased both in untreated patients with moderate and severe symptoms and in all drug-treated groups compared with controls (p < 0.001). All of the scavengers and antioxidants were significantly decreased in untreated patients and better preserved after retinoid and biological therapy. DSC scans of blood plasma showed melting temperature a characteristic parameter to follow the severity of disease. The calorimetric enthalpy is exhibiting a moderate decrease with the progression of the inflammation. These findings suggest that an imbalance exists between pro-oxidants and antioxidants in untreated severe psoriatic patients. All drug therapy reduced the changes, mainly the biologic response modifiers. Similarly, DSC showed differences between untreated and conventional systemic drug treatment.     

Controlling grafting density and side chain length in poly(n‐butyl acrylate) by ATRP copolymerization of macromonomers

Atom transfer radical polymerization (ATRP) was used for the preparation and subsequent copolymerization of two acryloyl‐terminated poly(n‐butyl acrylate) macromonomers with different degrees of polymerization (DP_nBA = 25 and 42). Homopolymerization of the higher molecular weight macromonomer ( MM1 ; PnBA₄₂‐A, M_n = 5600, DP_MM = 42, M_w/M_n = 1.18) resulted in preparation of a densely grafted polymer with a narrow molecular weight distribution (M_w/M_n = 1.14), but with the limited degree of polymerization DP = 12. The ultimate degree of homopolymerization for the lower molecular weight macromonomer ( MM2 ; PnBA₂₅‐A, M_n = 3400, DP_MM = 25, M_w/M_n = 1.20) was higher, and DP increased from 12 to 22. The limited DP could be because of progressively increasing steric congestion for macromonomers in approaching the growing chain ends of densely grafted polymers. When MMs were copolymerized with nBA, the reactivity of MM was nearly the same as that of nBA monomer irrespective of the differences in the degree of polymerization of the MMs and the initial molar ratio of nBA to MM. Well‐defined graft polymers with different lengths of backbone and side chains, and different graft density were successfully prepared by “grafting through” ATRP. Tadpole‐shaped and dumbbell‐shaped graft polymers were also synthesized by ATRP. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5454–5467, 2006     

A Conformational Study on Silacyclohexane. Comparison of ab initio (HF,MP2), DFT,and Molecular Mechanics Calculations. Conformational Energy Surface of Silacyclohexane

The structures and relative energies for the basic conformations of silacyclohexane 1 have been calculated using HF, RI‐MP2, RI‐DFT and MM3 methods. All methods predict the chair form to be the dominant conformation and all of them predict structures which are in good agreement with experimental data. The conformational energy surface of 1 has been calculated using MM3. It is found that there are two symmetric lowest energy pathways for the chair‐to‐chair inversion. Each of them consists of two sofa‐like transition states, two twist forms with C₁ symmetry (twist‐C₁), two boat forms with Si in a gunnel position (C₁ symmetry), and one twist form with C₂ symmetry (twist‐C₂). All methods calculate the relative energy to increase in the order chair < twist‐C₂ < twist‐C₁ < boat. At the MP2 level of theory and using TZVP and TZVPP (Si atoms) basis sets the relative energies are calculated to be 3.76, 4.80, and 5.47 kcal mol^–1 for the twist‐C₂, twist‐C₁, and boat conformations, respectively. The energy barrier from the chair to the twisted conformations of 1 is found to be 6.6 and 5.7 kcal mol^–1 from MM3 and RI‐DFT calculations, respectively. The boat form with Si at the prow (C_s symmetry) does not correspond to a local minimum nor a saddle point on the MM3 energy surface, whereas a RI‐DFT optimization under C_s symmetry constraint resulted in a local minimum. In both cases its energy is above that of the chair‐to‐twist‐C₁ transition state, however, and it is clearly not a part of the chair‐to‐chair inversion.     

Comparison of low crystallinity TiO2 film with nanocrystalline anatase film for dye-sensitized solar cells

Dye adsorption and microstructure of TiO₂ film are important properties when it is used as photoelectrode of dye-sensitized solar cells (DSCs). This study investigated the application of a low crystallinity TiO₂ film in DSCs. The low crystallinity TiO₂ film is composed of interconnected spherical particles with an average size of 20 nm and has homogeneous mesoporous inner structure. A DSC based on the anatase nanocrystalline mesoporous film prepared by P25 was used for comparison purpose. It is shown that although loaded with much less dye, the DSC based on the low crystallinity TiO₂ film generated I_sc (short circuit photocurrent) as much as the one based on the conventional anatase nanocrystalline film does and obtained higher V_oc (open circuit photovoltage) as well as ff (fill factor). The overall light-to-electricity efficiency (η) of the DSC based on the low crystallinity TiO₂ film reached 5.37%, while the η of the DSC based on anatase nanocrystalline film was 4.69% in this work condition. It is suggested that a low crystallinity TiO₂ mesoporous film with a proper microstructure is as efficient as the anatase nanocrystalline mesoporous film when used in DSCs.     

A study of phase separation of crystalline and miscible polymer blends. Poly(ε-caprolactone)/poly(styrene-co-acrylonitrile)

The phase separation of a crystalline and miscible polymer blend, poly(ε-caprolactone) /poly(styrene-co-acrylonitrile) (PCL/SAN), has been studied by differential scanning calorimetry (DSC), using a SAN containing 28.3% of acrylonitrile units. Several phenomena can be associated with the occurrence of phase separation depending upon the composition of the mixture. Following annealing at high temperatures, below and above the phase separation temperature T_c, three cases can be distinguished. In Case I, there is no sign of crystallization during quenching and DSC scanning, but a melting peak is observed at T_c, and above. In Case II, there is no crystallization on quenching but it does occur during the DSC run; the shift of the crystallization peak can then be related to T_c. In Case III, there is crystallization on quenching, and additional crystallization during the DSC run; the change of area of the crystallization peak is indicative of T_c. From these observations, the phase diagram of the system was determined. © 1993 John Wiley & Sons, Inc.     

Effect of anisotropic deformation on the differential scanning calorimetry response of polymer glasses

Large anisotropic deformation affects the physical state of a polymer glass, where the changes in the state of material are revealed by performing a differential scanning calorimetry (DSC) experiment. Previously, the deformation was applied to polymers well below their glass transition temperatures, and it was found that uniaxial compressive loading–unloading resulted in a broad exothermic peak on the DSC trace. Here we report on the effect on the subsequent DSC response of a deformation experiment performed in uniaxial extension on a ductile 50:50 co-polymer poly(BMA-co-MMA) (PBMA/MMA). The deformation of up to 80% strain was applied at T_g − 30°C and T_g − 40°C, that is, closer to T_g than in the previous work. Unlike in the well below T_g deformation case, the DSC trace contains an endothermic peak followed by an exothermic peak. The magnitude of the endothermic peak as well as the asymptotic glassy heat capacity increase with the amount of mechanical work performed during the deformation cycle.