Modification of sodium aluminum silicate hydrate by thioglycolic acid as a new composite capable of removing and preconcentrating Pb(II), Cu(II), and Zn(II) ions from food and water samples

In this paper, sodium aluminum silicate hydrate was synthesized using rice husk as a silicon source and scrap aluminum cans as an aluminum source. Afterward, with the aid of microwave heating, a composite of sodium aluminum silicate hydrate and (3-aminopropyl)trimethoxysilane was facilely synthesized then modified by thioglycolic acid to produce a new composite. Besides, characterization of the synthesized composite was carried out using XRD, FT-IR, TEM, CHN elemental analyzer, nitrogen gas sorption analyzer, and SEM. The XRD pattern of the produced composite shows that there is a halo at 2θ = 25.0°, which means that there is a crystalline structure that is combined with an amorphous background. The SEM and TEM studies indicate that the synthesized composite has a structure similar to cotton. The synthesized composite was utilized for the efficient removal and preconcentration of Pb(II), Cu(II), and Zn(II) ions from food and water samples prior to determination by flame atomic absorption spectrometry. The produced composite has a maximum adsorption capacity of 185.53, 168.92, and 125.94 mg/g for Pb(II), Cu(II), and Zn(II) ions, respectively. The recovery findings demonstrate that the process is accurate, adaptable, and resulted in quantitative separation (greater than95 percent). Furthermore, the % RSD was less than 3.5 percent, indicating good reproducibility. The Langmuir isotherm and pseudo-second-order model fit the experimental results well. The thermodynamic studies established that the adsorption process is spontaneous, chemical, and exothermic. The produced composite was successfully regenerated and used multiple times to remove the metal ions under investigation from aqueous solutions.     

New zinc(II), copper(II), nickel(II), and vanadium(IV) complexes containing disulfide ligand: Synthesis,spectroscopic studies and calf thymus DNA interaction investigation

New Schiff base complexes of zinc(II), copper(II), nickel(II), and vanadium(IV) were synthesized using the Schiff base ligand formed by the condensation of 2-aminoethanethiol and 2-hydroxy-1-naphthaldehyde. The tetradentate Schiff base ligand N,N´-(3,4-dithiahexane-1,6-diyl)bis(2-hydroxy-1-naphthaleneimine), containing a disulfide bond, was coordinated to the metal(II) ions through the two azomethine nitrogen atoms and two deprotonated phenolic oxygens of two different ligands which was connected to each other by sulfur-sulfur bond. The molar conductivity values of complexes in DMSO solvent implied the presence of nonelectrolyte species. The fluorescence properties of the Schiff base ligand and its complexes were studied in dimethylsulfoxide. The Schiff base ligand and its complexes were characterized by FT-IR, ¹H NMR, UV/Vis spectroscopies, elemental analysis, and conductometry. The crystal structure of tetradentate Schiff base ligand was characterized by single crystal X-ray diffraction. The Schiff base ligand was contained disulfide bond. Furthermore, the binding interaction of these complexes with calf thymus DNA (CT-DNA) was investigated by different methods.     

Construction and Application of an Electrochemical Sensor for Simultaneous Determination of Cd(II), Cu(II) and Hg(II) in Water and Foodstuff Samples

By incorporation of synthesized magnetite nanoparticles (Fe₃O₄ NPs) coated with a new Schiff base into carbon paste electrode, a novel modified electrode was constructed for simultaneous determination of ultra trace amounts of Cd(II), Cu(II) and Hg(II). The complexation reaction of Schiff base with metal ions was studied spectrophotometrically. Under optimal conditions a detection limit of 0.20, 0.90 and 1.00 ng mL^?1 for Cd(II), Cu(II) and Hg(II), respectively, was obtained. We take the advantages of the proposed method for simple, rapid, sensitive and selective simultaneous determination of trace amounts of hazardous Cd(II), Cu(II) and Hg(II) in water and foodstuff samples.     

Synthesis, spectroscopic studies and crystal structure of the Schiff base ligand L derived from condensation of 2-thiophenecarboxaldehyde and 3,3'-diaminobenzidine and its complexes with Co(II), Ni(II), Cu(II), Cd(II) and Hg(II): Comparative DNA binding studies of L and its Co(II), Ni(II) and Cu(II) complexes

The Schiff base ligand, N,N'-bis-(2-thiophenecarboxaldimine)-3,3'-diaminobenzidine (L) obtained from condensation of 2-thiophenecarboxaldehyde and 3,3'-diaminobenzidine, was used to synthesize the complexes of type, [M2L2]Cl4 [M=Co(II), Ni(II), Cu(II), Cd(II) and Hg(II)]. The newly synthesized ligand (L) was characterized on the basis of the results of elemental analysis, FT-IR, 1H NMR, 13C NMR, mass spectroscopic studies and single crystal X-ray crystallography. The characteristic resonance signals in 1H NMR and 13C NMR spectra indicated the presence of azomethine group as a result of condensation reaction. The stoichiometry, bonding and stereochemistries of complexes were ascertained on the basis of results of elemental analysis, magnetic susceptibility measurements, molar conductance and spectroscopic studies viz., FT-IR, 1H and 13C NMR, UV-vis and EPR. EPR, UV-vis and magnetic moment data revealed an octahedral geometry for complexes with distortion in Cu(II) complex and conductivity data show 1:2 electrolytic nature of complexes. Absoption and fluorescence spectroscopic studies supported that Schiff base ligand L and its Co(II), Ni(II) and Cu(II) complexes exhibited significant binding to calf thymus DNA. The complexes exhibited higher affinity to calf thymus DNA than the free Schiff base ligand L.     

The starch modified montmorillonite for the removal of Pb(II), Cd(II) and Ni(II) ions from aqueous solutions

In the present study, we attempted to synthesize a novel sorbent from the starch modified montmorillonite for the removal of Pb(II), Cd(II), and Ni(II) ions from aqueous solutions. Structure and properties of the adsorbent were characterized by Fourier-transformed infrared(FT-IR) spectroscopy, X-ray diffraction (XRD), and Field emission scanning electron microscopic (FE-SEM) techniques. Batch experiments were confirmed through the effect of different conditions including pH, contact time, initial metal concentration and adsorbent dose. Specifically, the optimum value of adsorbent dose was achieved as 20 g/l for the removal of almost metal ions. The adsorption data was fitted with the optimum pH value as 5 for all experiments. The contact time at which the uptake of maximum metal adsorption was observed within 45 min for Pb(II), 90 min for Cd(II), and 60 min for Ni(II). In addition, it was revealed in our study that the equilibrium data obeyed the Langmuir model, and the adsorption kinetic followed a pseudo second-order rate model. Obtained results were noticeable for a modified phyllosilicate adsorbent, and with such a simple and low-cost modification for montmorillonite, the potential of this material as an economical and effective adsorbent for the removal of metal ions from aqueous solution was considerably elevated.     

Facile synthesis of a novel nanocomposite for determination of mercury and copper ions in food and water samples

This paper describes the modification of sodium aluminum silicate hydrate by 3-bromo-5-chlorosalicylaldehyde to form a new composite. Furthermore, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), CHN elemental analysis, Nitrogen gas sorption analyzer, and Scanning electron microscopy (SEM) tools were used for characterizing the synthesized composite. The XRD pattern of the synthesized composite shows a halo at 2Θ = 25°, confirming the destruction of the crystalline structure of the nanomaterial owing to the association with an organic substance. The synthesized composite was utilized for the removal and preconcentration of mercury and copper ions from water and food samples. The maximum adsorption capacity of the synthesized composite towards mercury and copper ions is 107.53 and 130.89 mg/g, respectively. In addition, the relative standard deviation was less than 3 %, showing excellent reproducibility. The dynamic analytical ranges are 0.8–380 μg/L and 1.00–550 μg/L for copper and mercury ions, respectively. The preconcentration factor is 10.     

DNA interaction studies of Cu(II), Co(II), and Ni(II) chelates derived from schiff base ligand

Chelates of the type M(L)₂ {where, M ?= ?Co(II), Ni(II) and Cu(II), and L ?= ?3-{(E)-[(2-hydroxy-3-methoxyphenyl)methylidene]amino}pyridin-4(1H)-one)} were synthesized by using the Schiff base ligand in the stochiometric ratio 2:1 (L:M) and Schiff base ligand (L) was synthesized by simple condensation between 2-hydroxy-3-methoxybenzaldehyde with 3-aminopyridin-4-ol. The structure and formation of synthesized compounds were established by different analytical and spectroscopic methods like, elemental analysis, UV- spectroscopy, FT-IR, Proton and Carbon NMR, mass spectrometry and Powder XRD. Further, the synthesized chelates screened for the DNA binding studies of Calf Thymus (CT)-DNA by exploiting electronic absorption spectra, relative viscosity measurements and thermal denaturation methods. The proposed DNA binding mode supports the enhancement in the binding activity of the complexes in presence of newly synthesized ligand. The cleavage activities of the PUC-18 DNA in the presence and the absence of the complexes were recorded with the help of gel-electrophoresis. The cleavage experiment results reveals that all the synthesized chelates can cleave pUC-18 DNA effectively.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Synthesis and characterization of heterocyclic Schiff base and its complexes with Cu(II), Ni(II), Co(II), Zn(II), and Cd(II)

A new Schiff base, {1-[(2-hydroxy-naphthalen-1-ylmethylene)-amino]-4-phenyl-2-thioxo-1, 2-dihydro-pyrimidin-5-yl}-phenyl-methanone, has been synthesized from N-amino pyrimidine-2-thione and 2-hydroxynaphthaldehyde. Metal complexes of the Schiff base were prepared from acetate/chloride salts of Cu(II), Co(II), Ni(II), Zn(II), and Cd(II) in methanol. The chemical structures of the Schiff-base ligand and its metal complexes were confirmed by elemental analyses, IR, ¹³C-NMR, ¹H-NMR, API-ES, UV-Visible spectroscopy, magnetic susceptibility, and thermogravimetric analyses. The electronic spectral data and magnetic moment measurements suggest mononuclear octahedral and mononuclear or binuclear square planar structures for the metal complexes. In light of these results, it was suggested that this ligand coordinates to each metal atom by hydroxyl oxygen, azomethine nitrogen, and thione sulfur to form octahedral complexes with Cd(II) and Zn(II).     

Co(II), Ni(II), Cu(II) and Zn(II) complexes of aminothiazole‐derived Schiff base ligands: Synthesis,characterization, antibacterial and cytotoxicity evaluation,bovine serum albumin binding and density functional theory studies

Transition metal complexes of type M(L)₂(H₂O)_x were synthesized, where L is deprotonated Schiff base 2,4‐dihalo‐6‐(substituted thiazol‐2‐ylimino)methylphenol derived from the condensation of aminothiazole or its derivatives with 2‐hydroxy‐3‐halobenzaldehyde and M = Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ (x = 0 for Cu²⁺ and Zn²⁺; x = 2 for Co²⁺ and Ni²⁺). The synthesized Schiff bases and their metal complexes were thoroughly characterized using infrared, ¹H NMR, electronic and electron paramagnetic resonance spectroscopies, elemental analysis, molar conductance and magnetic susceptibility measurements, thermogravimetric analysis and scanning electron microscopy. The results reveal that the bidentate ligands form complexes having octahedral geometry around Co²⁺ and Ni²⁺ metal ions while the geometry around Cu²⁺ and Zn²⁺ metal ions is four‐coordinated. The geometries of newly synthesized Schiff bases and their metal complexes were fully optimized in Gaussian 09 using 6–31 + g(d,p) basis set. Fluorescence quenching data reveal that Zn(II) and Cu(II) complexes bind more strongly to bovine serum albumin in comparison to Co(II) and Ni(II) complexes. The ligands and their complexes were evaluated for in vitro antibacterial activity against Escherichia coli ATCC 25922 (Gram negative) and Staphylococcus aureus ATCC 29213 (Gram positive) and cytotoxicity against lever hepatocellular cell line HepG2.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.     

Synthesis, spectral characterization, and thermal behavior of mononuclear Cu(II), Co(II), Ni(II), Mn(II), and Zn(II) complexes with 5-bromosalycilaldehyde isonicotinoylhydrazone

A bidentate/tridentate 5-bromosalycilaldehyde isonicotinoylhydrazone Schiff base was synthesized by condensing 5-bromosalycilaldehyde with isonicotinoylhydrazine. Cu(II), Co(II), Ni(II), Mn(II) and Zn(II) complexes of this chelating ligand were synthesized using nitrates of these metals. The ligand and the complexes were characterized by elemental analysis, UV–Vis, IR and EPR spectroscopy, conductance and magnetic susceptibility measurements, fluorescence, cyclic voltammetry and thermogravimetric analysis. The ligand and Zn(II) complex exhibits solid-state photoluminescence at room temperature.     

Synthesis and characterization of cobalt(II), nickel(II), copper(II), palladium(II) and dioxouranium(VI) complexes of the antipyrine Schiff base of 3-formylsalicylic acid

A new Schiff base has been synthesized from 4-aminoantipyrine and 3-formylsalicylic acid. The ligand has a dianionic tetradentate compartmental OONO donor system. The cobalt(II), nickel(II), copper(II) and dioxouranium(VI) complexes exist in phenolato-bridged dinuclear species, while palladium(II) gives a mononuclear complex with free –COOH groups. The complexes have been characterized by elemental analyses, i.r., u.v.-vis, thermal and magnetic measurements.     

Metallation of tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> Schiff base with Mn(II), Co(II), Cu(II) and Zn(II): synthesis,characterization and formation constants measurement

Four Schiff base ligands, salabza-H₂ = N,N′-bis(salicylidene)-2-aminobenzylamine, were synthesized by condensation of one mole of 2-aminobenzylamine and two moles of salicylaldehyde and/or two moles of substituted salicylaldehyde (5-OMe, 5-Br, 5-NO₂). All the four Schiff bases and their Mn(II), Co(II), Cu(II) and Zn(II) complexes are characterized by UV-Vis, FT-IR, ¹H NMR spectroscopy, mass spectrometry and elemental analysis. The formation constants and the Gibbs free energies were measured spectrophotometrically for 1:1 complexes in methanol in constant ionic strength (I = 0.1 mol dm⁻³ NaClO₄) and at 25°C. The data refinement was carried out with the SQUAD program. The trend of formation constants of H₂L¹ with M(II) follows the order: Mn(II) (3.97) < Zn(II) (4.30) < Co(II) (4.89) < Cu(II) (5.73)     

Acceleration Effect of Fe(II), Co(II), Ni(II) and Cu(II) on the Hydrolysis Rate of Ortho- or Para-Hydroxy Schiff Bases

The kinetics of hydrolysis of ortho- or para-hydroxybenzylidene-4-benzidine Schiff bases have been examined in the pH range 1.70–11.90, in aqueous media containing 20wt% dioxane, at 20 °C. In basic media, pH > 8.47, a slight increase in the hydrolysis reaction rate of the Schiff bases is observed. In such basic media, the rate-controlling step is the attack of hydroxide ion on the ionized Schiff base. Below pH 6.82, the rate-determining step is ascribed to be the attack of water molecules on the protonated substrate. The effects of Fe(II), Co(II), Ni(II) and Cu(II) ions on the hydrolysis reaction rate of the Schiff bases have been studied and discussed on the basis of formation of a monocyclic chelate rings. The various thermodynamic parameters have also been evaluated and discussed.     

Nickel(II), copper(II), cobalt(II), and palladium(II) complexes with a Schiff base: crystal structure,DFT study and copper complex catalyzed aerobic oxidation of alcohol to aldehyde

Ni(II), Cu(II), Co(II), and Pd(II) complexes were synthesized with a Schiff base containing thioether with ONS donors chelating to the metal center. The ligand and complexes were characterized by elemental analysis, FT-IR, ¹H-NMR, UV–visible spectroscopy and magnetic studies. The crystal structures of the ligand and its Ni(II) and Pd(II) complexes were determined by single-crystal X-ray diffraction analysis. Structures revealed that the ligand chelated with Ni(II) and Pd(II) center in slightly distorted octahedral and slightly distorted square planar fashion, respectively. DFT studies of the Pd(II) complex revealed that the calculated structural parameters are very close with the experimentally observed data. The Cu(II) complex shows very good catalytic activity toward the conversion of alcohol to aldehyde under aerobic oxidation with ammonium persulfate.     

Bioactive Co(II), Ni(II), and Cu(II) Complexes Containing a Tridentate Sulfathiazole-Based (ONN) Schiff Base

New Co(II), Ni(II), and Cu(II) complexes were synthesized with the Schiff base ligand obtained by the condensation of sulfathiazole with salicylaldehyde. Their characterization was performed by elemental analysis, molar conductance, spectroscopic techniques (IR, diffuse reflectance and UV–Vis–NIR), magnetic moments, thermal analysis, and calorimetry (thermogravimetry/derivative thermogravimetry/differential scanning calorimetry), while their morphological and crystal systems were explained on the basis of powder X-ray diffraction results. The IR data indicated that the Schiff base ligand is tridentate coordinated to the metallic ion with two N atoms from azomethine group and thiazole ring and one O atom from phenolic group. The composition of the complexes was found to be of the [ML₂]∙nH₂O (M = Co, n = 1.5 (1); M = Ni, n = 1 (2); M = Cu, n = 4.5 (3)) type, having an octahedral geometry for the Co(II) and Ni(II) complexes and a tetragonally distorted octahedral geometry for the Cu(II) complex. The presence of lattice water molecules was confirmed by thermal analysis. XRD analysis evidenced the polycrystalline nature of the powders, with a monoclinic structure. The unit cell volume of the complexes was found to increase in the order of (2) < (1) < (3). SEM evidenced hard agglomerates with micrometric-range sizes for all the investigated samples (ligand and complexes). EDS analysis showed that the N:S and N:M atomic ratios were close to the theoretical ones (1.5 and 6.0, respectively). The geometric and electronic structures of the Schiff base ligand 4-((2-hydroxybenzylidene) amino)-N-(thiazol-2-yl) benzenesulfonamide (HL) was computationally investigated by the density functional theory (DFT) method. The predictive molecular properties of the chemical reactivity of the HL and Cu(II) complex were determined by a DFT calculation. The Schiff base and its metal complexes were tested against some bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis). The results indicated that the antibacterial activity of all metal complexes is better than that of the Schiff base.     

Ni(II), Cu(II), and Zn(II) complexes of tetradentate schiff base containing two thiadiazoles units: Structural,spectroscopic, magnetic properties,and molecular modeling studies

Four new mononuclear metal complexes with a mononucleating Schiff base ligand containing two thiadiazoles units have been synthesized. The ligand and metal complexes were characterized by elemental analyses, IR, ¹H, and ¹³C NMR, UV–vis, ESR, electrospray ionization mass spectra, and magnetic susceptibility measurements. Electronic spectra, magnetic susceptibility measurement, and molecular modeling studies support octahedral geometry around the Ni(II), Cu(II), and Zn(II) ions. The magnetic properties were investigated, and ferromagnetic coupling is observed in Cu(II) and Ni(II) complexes. In addition, total energy and heat of formation calculated for conformers of the Schiff base ligand by the semiempirical AM1 calculations have shown that E,Z‐isomer of the ligand is more stable (about 5.3 kcal/mol) than E,E‐ and Z,Z‐isomers. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:700–712, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20496     

Synthesis,spectral characterization and biological activity of benzofuran Schiff bases with Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) complexes

New Schiff bases have been synthesized from benzofuran-2-carbohydrazide and benzaldehyde, [BPMC] or 3,4-dimethoxybenzaldehyde, [BDMeOPMC]; complexes of the type MLX₂, where M = Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II), L = BPMC or BDMeOPMC and X = Cl, have been prepared. Structures have been elucidated on the basis of elemental analysis, conductance measurements, magnetic properties, spectral studies i.e., ¹H NMR, electronic, ESR and IR studies show that the Schiff bases are bidentate through the azomethine nitrogen and oxygen of the carbonyl. We propose tentative structures for all of these complexes. The antifungal and antibacterial activities of the ligands and their metal complexes have been screened against fungi Aspergillus niger and Aspergillus fumigatus and against bacteria Escherichia coli and S. aurious.     

SYNTHESIS AND CHARACTERIZATION OF Fe(III), Co(III), Cu(II) AND Zn(II) COMPLEXES OF N-2,4-HYDROXYBENZAL-D-GLUCOSAMINE

Abstract

The Schiff base N-2,4-dihydroxybenzal-D-glucosamine (L), and its Fe(III), Co(III), Cu(II) and Zn(II) complexes have been synthesized and characterized. Magnetic moments suggest that all complexes are high-spin. The Cu(II) chelate in DMF solution has a distorted tetrahedral structure, as shown by ESR and electronic spectra. Detailed studies have been made concerning the solution equilibrium of L with transition metal ions. Stabilities of the complexes are in accord with the Irving-Williams series.