Hydrothermal synthesis and electrochemistry of a δ-type manganese vanadium oxide

A new manganese vanadium oxide containing double sheets of V₂O₅ layers has been synthesized hydrothermally in the presence of tetramethylammonium ions. It has the electrochemically active δ-V₂O₅ structure, variants of which are found in V₆O₁₃ and xerogel vanadium oxides. The manganese ions, together with the N(CH₃)₄ ions, reside in a disordered manner between the oxide sheets. The δ-type [N(CH₃)₄]_zMn_yV₂O₅·nH₂O has a monoclinic structure, a=11.66(2) Å, b=3.610(9) Å, c=13.91(4) Å, β=108.8(2)°. It reacts readily with lithium with a capacity exceeding 220 mAh g⁻¹; the organic ions do not impede reaction as in the single sheet V₂O₅ materials, such as N(CH₃)₄V₃O₇.     

Kinetic patterns in the formation of nanosized manganese–manganese oxide systems

Transformations in nanosized manganese films are studied by means of optical spectroscopy, microscopy, and gravimetry at different film thicknesses (d = 4–108 nm) and temperatures of heat treatment (T = 373–673 K). It is found that the kinetic curves of conversion are satisfactorily described in the terms of linear, inverse logarithmic, cubic, and logarithmic laws. The contact potential difference is measured for Mn and MnO films, and photo EMF is measured for Mn–MnO systems. An energy band diagram is constructed for Mn–MnO systems. A model for the thermal transformation of Mn films is proposed that includes stages of oxygen adsorption, the redistribution of charge carriers in the contact field of Mn–MnO, and manganese(II) oxide formation.     

Deep oxidation of methane on granulated and monolith copper—manganese oxide catalysts

Deep oxidation of methane on the granulated Cu—Mn-mixed oxide catalyst and metallic monolith catalysts coated with the same oxide was studied. The experimental kinetic curves for both monolith and granulated catalysts are satisfactorily described by the first-order rate law. The values of activation energies, reaction rate constants, and feed flow rates for the specified conversion almost coincide for both types of the catalysts. The data obtained confirm the possibility of a quantitative comparison of the activities of the granulated and monolith catalysts. The activity of the monoliths is proportional to the concentration of the active component.     

Research progress of tunnel-type sodium manganese oxide cathodes for SIBs

Among the large energy storage batteries, the sodium ion batteries（SIBs） are attracted huge interest due to the fact of its abundant raw materials and low cost, and has become the most promising secondary battery. Tunnel-type sodium manganese oxides（TMOs） are industrialized cathode materials because of their simple synthesis method and proficient electrochemical performance. Na_0.44MnO₂（NMO） is considered the best candidate material for all tunnel-type structural materials. ...     

Hydrothermal synthesis and electrochemistry of a manganese vanadium oxide, γ-MnV2O5

A new manganese vanadium oxide MnV₂O₅ has been synthesized using a mild hydrothermal reaction. MnV₂O₅ crystallizes in the orthorhombic system, space group Pnma, a=9.7585(2) Å, b=3.5825(1) Å, c=11.2653(2) Å. It is isostructural to γ-LiV₂O₅. It reacts readily and reversibly with lithium, with a stable capacity but with a large polarization.     

Synthesis–structure correlations of manganese–cobalt mixed metal oxide nanoparticles

Mixed metal oxides in the nanoscale are of great interest for many aspects of energy related research topics as water splitting, fuel cells and battery technology. The development of scalable, cost-efficient and robust synthetic routes toward well-defined solid state structures is a major objective in this field.While monometallic oxides have been studied in much detail, reliable synthetic recipes targeting specific crystal structures of mixed metal oxide nanoparticles are largely missing. Yet, in order to meet the requirements for a broad range of technical implementation it is necessary to tailor the properties of mixed metal oxides to the particular purpose. Here, we present a study on the impact of the nature of the gas environment on the resulting crystal structure during a post-synthesis thermal heat treatment of manganese–cobalt oxide nanoparticles. We monitor the evolution of the crystal phase structure as the gas atmosphere is altered from pure nitrogen to synthetic air and pure oxygen. The particle size and homogeneity of the resulting nanoparticles increase with oxygen content, while the crystal structure gradually changes from rocksalt-like to pure spinel. We find the composition of the particles to be independent of the gas atmosphere. The manganese–cobalt oxide nanoparticles exhibited promising electrocatalytic activity regarding oxygen evolution in alkaline electrolyte. These findings offer new synthesis pathways for the direct preparation of versatile utilizable mixed metal oxides.     

Selective catalytic oxidation reaction of p-xylene on manganese–iron mixed oxide materials

Mixed manganese iron oxides (Mn/Fe/O) as heterogeneous catalysts were prepared by hydrothermal treatment and citrate methods to be tested in the oxidation of p-xylene (PX) using as oxidation agent molecular oxygen, hydrogen peroxide, and tert-butyl hydroperoxide. Preparation of mixed MnFe oxide by the citrate method releases materials with smaller particle size and lower degree of crystallinity as compared with the hydrothermal one, which further leads to a higher activity toward the oxidation of PX. A conversion of PX of 98% and a yield in p-toluic acid of 93% were obtained in the presence of Mn/Fe/O prepared by the citrate method using tert-butyl hydroperoxide as an oxidizing agent.     

Chemical synthesis of oriented ferromagnetic LaSr-2 × 4 manganese oxide molecular sieve nanowires

We report a chemical solution based method using nanoporous track-etched polymer templates for producing long and oriented LaSr-2 × 4 manganese oxide molecular sieve nanowires. Scanning transmission electron microscopy and electron energy loss spectroscopy analyses show that the nanowires are ferromagnetic at room temperature, single crystalline, epitaxially grown and self-aligned.     

One-pot co-precipitation of copper–manganese–zinc oxide catalysts for the oxidation of CO and SO2 in the presence of ultrasonic irradiation

Research on Chemical Intermediates - This paper studies the effect of addition of Zn and ultrasound-assisted co-precipitation on Cu-Mn oxide catalysts for the oxidation of CO. Cu-Mn-Zn oxide...     

Discovery of nitric oxide in marine ecological system and the chemical characteristics of nitric oxide

Nitric oxide was discovered in both the lab and the alga culture pond of Daya Bay (1―300 m3) before the growth of alga reached the maximum. The results included: (1) NO was detected before the growth of alga reached the maximum in the case of red tide alga and food alga, and the concentration of NO decreased rapidly after the growth maximum; (2) the curve between NO con-centration and time indicated that the concentration of NO in the daytime was more than that at night, and the maximal concentration of NO appeared in the midday (1―3 pm); (3) the growth of alga reached the maximum in the alga culture pond of Daya Bay in about 8―10 d, and NO was discovered in 5―7 d; (4) the measured NO concentration was 10-9 mol/L, 10-9―10-8 mol/L, and 10-8 mol/L for Haeterosigma akashiwo, mixed alga in Daya Bay and Chaetoceros Curvisetus individually; (5) the relation of illumination with NO production was discussed.     

Thermal properties and structure of zinc–manganese metaphosphate glasses

Journal of Thermal Analysis and Calorimetry - The thermal properties and some physical characteristics of the metaphosphate glassy system xMnO–(50?x)ZnO–50P2O5 were studied....     

σ-Alane complexes of chromium, tungsten, and manganese

Photolytic ligand displacement and salt metathesis routes have been exploited to give access to κ(1) σ-alane complexes featuring Al-H bonds bound to [W(CO)(5)] and [Cp'Mn(CO)(2)] fragments, together with a related κ(2) complex of [Cr(CO)(4)]. Spectroscopic, crystallographic, and quantum chemical studies are consistent with the alane ligands acting predominantly as σ-donors, with the resulting binding energies calculated to be marginally greater than those found for related dihydrogen complexes.     

Thermogravimetric and differential scanning calorimetric investigations of manganese–glycine interactions

Thermogravimetric (t.g.) and differential scanning calorimetric (d.s.c.) data have been used to study metal–amino acid interactions in adducts of general formula MnCl₂ · ngly (gly = glycine, n = 0.7, 2.0, 4.0 and 5.0). All the prepared adducts exhibit only a one step mass loss associated with the release of glycine molecules, except for the 0.7gly adduct, which exhibits two glycine mass loss steps. From d.s.c. data, the enthalpy values associated with the glycine mass loss can be calculated: MnCl₂ · 0.7gly = 409 and 399 kJ mol^–1, MnCl₂ · 2.0gly = 216 kJ mol^–1, MnCl₂ · 4.0gly = 326 kJ mol^–1 and MnCl₂ · 5.0gly = 423 kJ mol^–1, respectively. The enthalpy associated with the ligand loss, plotted as function of the number of ligands for the n = 2.0, 4.0 and 5.0 adducts, gave a linear correlation, fitting the equation: H (ligand loss)/kJ mol^–1 = 67 × (number of ligands, n) + 76. A similar result was achieved when the enthalpy associated with the ligand loss was plotted as a function of the _a(COO^–) bands associated with the coordination through the carboxylate group, 1571, 1575 and 1577 cm^–1, respectively, for the n = 2.0, 4.0 and 5.0 adducts, giving the equation H (ligand loss) /kJ mol^–1 = 33.5 × _a(COO^–) /cm^–1 – 52418.5. This simple equation provides evidence for the enthalpy associated with the ligand loss being very closely related to the electronic density associated with the metal–amino acid bonds.     

Theoretical and experimental investigations of the enantioselective epoxidation of olefins catalyzed by manganese complexes

The enantioselective epoxidation of olefin by Mn^II（R,R-PMCP）(OTf)2, H₂O₂ and H₂SO₄ was explored by DFT calculations and experiments. Theoretical results suggest that [MnV（O）(R,R-PMCP)（SO4）]+species with a triplet ground spin state serves as the active species for the olefin epoxidation. It can be generated by the H₂SO₄ assisted O-O heterolysis of Mn^III（OOH） species. Mn^III-persulfate is also involve...     

Efficient and green syntheses of novel γ-aminophosphonate and phosphine oxide derivatives

Two synthetic protocols leading to novel γ-aminophosphonate and phosphine oxide derivatives, by reductive amination of γ-phosphonylketones, are reported. The first method involved a two-step procedure. Imine intermediates were first isolated from the p-toluenesulfonic acid-catalyzed reaction of primary amines with γ-ketophosphonates and phosphine oxides, then reduced with NaBH₄ in refluxing ethanol. The second method consists of a one-pot procedure which includes the condensation of γ-ketophosphonates and phosphine oxides with primary amines, in the presence of molecular sieves, followed by reduction with NaBH₄. These methods offer significant advantages over prior reports, such as efficiency, generality, and good yields. Furthermore, they are green protocols avoiding hazardous hydrides and solvents.     

Investigations on the redox behaviour of manganese in manganese(II)–saccharin and manganese(II)–saccharin–1,10-phenanthroline complexes

The redox behaviour of manganese system in Mn–Sac and Mn–Sac–Phen complexes were studied using cyclic voltammetry technique at glassy carbon electrode (GCE) in 0.1 M KCl electrolyte. The CV of Mn–Sac solution is more or less similar to that of uncoordinated Mn (in MnCl₂) accept slight difference in peak position and peak current. The presence of secondary ligand phenanthroline (in Mn–Sac–Phen complex) changes the CV of Mn system largely compared to those of uncoordinated Mn and Mn–Sac. The redox system is irreversible in Mn–Sac and quasi-reversible in Mn–Sac–Phen complex. The effect of concentration and pH on the redox behaviour of Mn system have been studied for both the complexes.     

Electrical surface charge and potential of hematite/yttrium oxide core–shell colloidal particles

Interest in the synthesis of composite colloidal particles consisting of a core and shell with different compositions stems from the fact that such particles can be useful in processes where the properties of both core (e.g., size and shape homogeneity, ease of preparation in large amounts, magnetic characteristics, etc.) and shell (interfacial properties, porosity, chemical stability, etc.) might be of interest. However, the applicability must be based on a proper characterization of those properties. In this work, colloidal spheres of hematite (α-Fe₂O₃) were used as nuclei of mixed particles where the shell is yttrium oxide. The electrical properties of the aqueous interface are compared to those of the pure oxides by means of potentiometric titration of their surface charge and potential against pH, as a function of indifferent electrolyte concentration. It is found that the mixed particles efficiently mimic yttrium oxide, since the behavior of their surface electrical characteristics closely resembles that of the latter compound. Differences are found, however, that can be ascribed to an incomplete or porous coverage, but such divergences are of little significance when an overall comparison is carried out. Received: 30 January 2001 Accepted: 11 July 2001     

Preparation and Electrocatalytic Activity of Polyaniline-poly（propylene oxide）

A novel copolymer of polyaniline-poly(propylene oxide) (PAN-PPO) was prepared by cyclic voltammetry (CV) and characterized by FFIR and SEM. It showed good electroactivity for methanol oxidation in H2SO4 solution.