Nano‐Fe3O4@TiO2/Cu2O Core‐shell Composite: A Convenient Magnetic Separable Catalyst for A3 and KA2 Coupling

An eco‐efficient one‐pot three component reaction between different aldehydes or ketones with alkynes and amines for the synthesis of propargylamines was performed using Fe₃O₄@TiO₂/Cu₂O as a nano‐magnetic composite under solvent free condition. The catalyst showed remarkable catalytic activity by decreasing the time of the reaction in comparison of other reported magnetic catalysts. In addition, the Fe₃O₄@TiO₂/Cu₂O can be easily recycled and reutilized for five times without apparent loss of catalytic activity.     

Preparation of core-shell magnetic Fe3O4@SiO2-dithiocarbamate nanoparticle and its application for the Ni2+, Cu2+ removal

A typical superparamagnetic nanoparticles-based dithiocarbamate absorbent (Fe₃O₄@SiO₂-DTC) with core-shell structure was applied for aqueous solution heavy metal ions Ni²⁺, Cu²⁺ removal.     

Fe3O4@SiO2@propyl‐ANDSA: A new catalyst for the synthesis of tetrazoloquinazolines

In this paper, a mild and green protocol has been developed for the synthesis of quinazoline derivatives. The catalytic activity of 7‐aminonaphthalene‐1,3‐disulfonic acid‐functionalized magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SiO₂@Propyl–ANDSA) was investigated in the one‐pot synthesis of new derivatives of tetrahydrotetrazolo[1,5‐a]quinazolines and tetrahydrobenzo[h]tetrazolo[5,1‐b]quinazolines from the reaction of aldehydes, 5‐aminotetrazole, and dimedone or 6‐methoxy‐3,4‐dihyronaphtalen‐1(2H)‐one at 100 °C in H₂O/EtOH as the solvent. The catalyst was characterized before and after the organic reaction. Fe₃O₄@SiO₂@Propyl–ANDSA showed remarkable advantages in comparison with previous methods. Advantages of the method presented here include easy purification, reusability of the catalyst, green and mild procedure, and synthesis of new derivatives in high yields within short reaction time.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile synthesis of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Cu<Subscript>2</Subscript>O nanocomposite and its visible light photocatalytic activity for the degradation of cationic dyes

Iron oxide-loaded Cu₂O photocatalysts were prepared by a facile hydrothermal method. The binary mixed metal oxide photocatalyst was characterized by XRD, FE-SEM, FTIR, UV–Vis-DRS, particle size and zeta potential measurements. XRD analysis showed that Fe₂O₃/Cu₂O catalysts were phase pure and highly crystalline in nature. FE-SEM images revealed the formation of nanospherical Fe₂O₃ over the Cu₂O surface during hydrothermal reaction. From UV–Vis diffuse reflectance spectroscopy studies, the optical band gap of the Fe₂O₃/Cu₂O photocatalyst was found to be slightly red-shifted to 1.85 eV, after loading of Fe₂O₃. The zeta potential analysis revealed that the surface of the Fe₂O₃/Cu₂O photocatalyst was negatively charged in neutral solution. The loading of n-type Fe₂O₃ on p-type Cu₂O augments the charge carrier separation at the interface, which was evident from the enhanced photodegradation of organic pollutants (Methylene blue and Rhodamine B dyes) under visible light irradiation.     

Butane‐1‐sulfonic acid immobilized on magnetic Fe3O4@SiO2 nanoparticles: A novel and heterogeneous catalyst for the one‐pot synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives in aqueous media

Butane‐1‐sulfonic acid immobilized on magnetic Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂‐Sultone) was easily prepared via direct ring opening of 1,4‐butanesultone with nanomagnetic Fe₃O₄@SiO₂. The prepared reagent was characterized and used for the efficient promotion of the synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives. All reactions were performed under mild and completely heterogeneous reaction conditions affording products in good to high yields. The catalyst is easily isolated from the reaction mixture by magnetic decantation and can be reused at least eight times without significant loss in activity.     

Electrochemical myoglobin biosensor based on carbon ionic liquid electrode modified with Fe3O4@SiO2 microsphere

In this paper, a Fe₃O₄@SiO₂ core-shell structure microsphere was synthesized and used to investigate the direct electron transfer of myoglobin (Mb) with a 1-butylpyridinium hexafluorophosphate based carbon ionic liquid electrode (CILE) as the substrate electrode. The mixture of Mb and Fe₃O₄@SiO₂ microsphere could form an organic–inorganic composite, which was immobilized on the surface of CILE with a chitosan (CS) film. Cyclic voltammetric experiments indicated that a pair of well-defined quasi-reversible redox peaks appeared on CS/Mb-Fe₃O₄@SiO₂/CILE with the formal peak potential (E ^0′) located at ?0.31 V (vs. saturated calomel electrode), which was corresponded to the electroactive center of Mb heme Fe(III)/Fe(II) redox couples. Direct electrochemical behaviors of Mb in CS-Fe₃O₄@SiO₂ composite film were carefully investigated with the electrochemical parameters calculated. The CS/Mb-Fe₃O₄@SiO₂/CILE showed good electrocatalytic behaviors to the reduction of trichloroacetic acid in the concentration range from 0.2 to 11.0 mmol L^?1 with the detection limit of 0.18 mmol L^?1 (3σ). Based on CS/Mb-Fe₃O₄@SiO₂/CILE, a new third-generation reagentless electrochemical biosensor was constructed with higher sensitivity and reproducibility.     

Nano-Fe3O4-encapsulated silica particles bearing sulfonic acid groups as a magnetically separable catalyst for green synthesis of 1,1-diacetates

Sulfonic acid-functionalized silica-coated nano-Fe₃O₄particles (Fe₃O₄@SiO₂–SO₃H) serve as a novel heterogeneous catalyst for the synthesis of acylals by direct condensation of aldehydes with acetic anhydride under solvent-free conditions at room temperature in short reaction times and excellent yields. The catalyst could be easily separated from the final product using an external magnet and reused several times without consequential loss of reactivity.     

Synthesis of Fe3O4@SiO2-Au/Cu magnetic nanoparticles and its efficient catalytic performance for the Ullmann coupling reaction of bromamine acid

Over bimetallic Au/Cu catalyst supported on magnetic Fe₃O₄ nanoparticles, water-mediated bromamine acid could be selectively converted into 4,4'-diamino-1,1'-dianthraquinonyl-3,3'-disulfonic acid (DAS) with a yield of 88.67%. The magnetic catalyst could be readily separated and reused.     

Synthesis of α‐Aminonitriles and 5‐Substituted 1H‐Tetrazoles Using an Efficient Nanocatalyst of Fe3O4@SiO2–APTES‐supported Trifluoroacetic Acid

Fe₃O₄@SiO₂–APTES‐supported trifluoroacetic acid nanocatalyst was used for the one‐pot synthesis of α‐aminonitriles via a three‐component reaction of aldehydes (or ketones), amines, and sodium cyanide. This method produced a high yield of 75–96% using only a small amount of the catalyst (0.05 g) in EtOH at room temperature. The catalyst was also employed for the synthesis of 5‐substituted 1H‐tetrazoles from nitriles and sodium azide in EtOH at 80°C. The tetrazoles were produced with good‐to‐excellent yields in a short reaction time of 4 h. Both synthetic methods were carried out in the absence of an organic volatile solvent. Because the supported trifluoroacetic acid generated a solid acid on the surface, thus the acid corrosiveness was not a serious challenge. This heterogeneous nanocatalyst was magnetically recovered and reused several times without significant loss of catalytic activity.     

Fe3O4@SiO2‐copper sucrose xanthate as a green nanocatalyst for N‐, O‐ and S‐arylation

Formation of C(sp²)–X bonds was carried out using a Fe₃O₄@SiO₂‐copper(I) sucrose xanthate nanoparticle catalyst with the aid of the copper(I) xanthate moiety in the catalyst which was prepared from the reaction between sucrose and carbon disulfide through an alkaline medium via the traditional Zeise approach. Various techniques were employed for the characterization of these novel nanoparticles. Three sorts of heteroatoms, N, O and S, successfully underwent heteroatom arylation to produce secondary or tertiary amines, ethers and thioethers, respectively.     

Carbazole‐based conjugated polymer covalently coated Fe3O4 nanoparticle as efficient and reversible Hg2+ optical probe

A type of fluorescent–magnetic dual‐function nanocomposite, Fe₃O₄@SiO₂@P‐2, was successfully obtained by Cu⁺‐catalyzed click reaction between acetylene (C?C? H)‐substituted carbazole‐based conjugated polymer ( P‐2) and azide‐terminated silica‐coated magnetic iron oxide nanoparticles (Fe₃O₄@SiO₂–N₃). Optical and magnetization analyses indicate that Fe₃O₄@SiO₂@P‐2 exhibits stable fluorescence and rapid magnetic response. The fluorescence of Fe₃O₄@SiO₂@P‐2 was quenched significantly in the presence of I^? and gave a detection limit (DL) of ～8.85 × 10^?7 M. Given the high binding constant and matching ratio between Hg²⁺ and I^?, the fluorescence of Fe₃O₄@SiO₂@P‐2/I^? complex recovered efficiently with the addition of Hg²⁺. A DL of ～4.17 × 10^?7 M was obtained by this probing system. Recycling of Fe₃O₄@SiO₂@P‐2 probe was readily achieved by simple magnetic separation. Results indicate that Fe₃O₄@SiO₂@P‐2 can be used as an “on–off–on” fluorescent switchable and recyclable Hg²⁺ probe. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3636–3645     

Cu/Cu_2O nanoparticles co-regulated carbon catalyst for alkaline Al-air batteries

Developing high-efficiency,inexpensive,and steady non-precious metal oxygen reduction reaction(ORR) catalysts to displace Pt-based catalysts is significant for commercial applications of Al-air battery.Here,we have prepared the Cu/Cu_2 O-NC catalyst with excellent ORR performance and high stability,due to the synergistic effect of Cu and Cu_2 O nanoparticles.The half-wave potential(0.8 V) and the limiting-current density(5.20 mA/cm~2) of the Cu/Cu_2 O-NC are very close to those of the 20% Pt/C catalyst(0.82 V,5.10 mA/cm~2).Besides,it exhibits excellent performance with a maximal power density of 250 mW/cm~2 and a stable continuous discharge for more than 90 h in the Al-air battery test The promoting effects of Cu_2 O towards Cu-based ORR catalysts are illustrated as follows:(ⅰ) Cu_2 O is the major ORR active site by the redox of Cu(Ⅱ)/Cu(Ⅰ),which provides excellent ORR activities;(ⅱ) Cu can stabilize the location of Cu_2 O by assisting the electron transfer to Cu(Ⅱ)/Cu(Ⅰ) redox,which is conducive to the high stability of the catalyst.This work provides a useful strategy for enhancing the ORR performance of Cu-based catalysts.     

Preparation for Magnetic Nanoparticles Fe3O4 and Fe3O4@SiO2 and Heterogeneous Fenton Catalytic Degradation of Methylene Blue

Dyestuff textile wastewater treatment has become a research hotspot due to its high chroma, poor biodegradability, and low toxicity characteristics. In this paper, we have synthesized magnetic Fe₃O₄ and core‐shell Fe₃O₄@SiO₂ materials by hydrothermal methods. These materials were characterized by XRD, TEM, N₂ adsorption‐desorption and so on. These materials’ heterogeneous Fenton has been applied to dye wastewater treatment. Methylene blue was used as a typical target of dye wastewater. Decolorization ratios of methylene blue were determined by different nanostructure composites catalysts. A serious of results of study showed that decolorization ratios of magnetic nanoparticles and core‐shell composites arrived at above 90 % under the weakly acidic or neutral conditions and room temperature. When these catalysts were reused, the results show that Fe₃O₄@SiO₂ materials were possessed with good cycle performance.     

Synthesis of a highly active amino‐functionalized Fe3O4@SiO2/APTS/Ru magnetic nanocomposite catalyst for hydrogenation reactions

An amino‐functionalized silica‐coated Fe₃O₄ nanocomposite (Fe₃O₄@SiO₂/APTS) was synthesized. The Fe₃O₄@SiO₂ microspheres possessed a well‐defined core–shell structure, uniform sizes and high magnetization. An immobilized ruthenium nanoparticle catalyst (Fe₃O₄@SiO₂/APTS/Ru) was obtained after coordination and reduction of Ru³⁺ on the Fe₃O₄@SiO₂/APTS nanocomposite. The Ru nanoparticles were not only ultra‐small with nearly monodisperse sizes but also had strong affinity with the surface of Fe₃O₄@SiO₂/APTS. The obtained catalyst exhibited excellent catalytic performance for the hydrogenation of a variety of aromatic nitro compounds, even at room temperature. Moreover, Fe₃O₄@SiO₂/APTS/Ru was easily recovered using a magnetic field and directly reused for at least five cycles without significant loss of its activity.     

Uniformly dispersed copper nanoparticles onto the modified magnetically recoverable nanocatalyst for aqueous synthesis of primary amides

Magnetically recoverable and environmentally friendly Cu‐based heterogeneous catalyst has been synthesized for the one‐pot conversion of aldehydes to their corresponding primary amides. The Fe₃O₄@SiO₂ nanocomposites were prepared by synthesis of Fe₃O₄ magnetic nanoparticles (MNPs) which was then coated with a silica shell via Stöber method. Bi‐functional cysteine amino acid was covalently bonded onto the siliceous shell of nanocatalyst. The Cu^II ions were then loaded onto the modified surface of nanocatalyst. Finally, uniformly dispersed copper nanoparticles were achieved by reduction of Cu^II ions with NaBH₄. Amidation reaction of aryl halides with electron‐withdrawing or electron‐donating groups and hydroxylamine hydrochloride catalyzed with Fe₃O₄@SiO₂@Cysteine‐copper (FSC‐Cu) MNPs in aqueous condition gave an excellent yield of products. The FSC‐Cu MNPs could be easily isolated from the reaction mixture with an external magnet and reused at least 8 times without significant loss in activity.     

Air-Stable Fe3O4@SiO2-EDTA-Ni(0) as an Efficient Recyclable Magnetic Nanocatalyst for Effective Suzuki-Miyaura and Heck Cross-Coupling via Aryl Sulfamates and Carbamates

The synthesis of inexpensive and novel air-stable Ni(0) nanoparticles immobilized on the EDTA-modified Fe₃O₄@SiO₂ nanocatalyst was investigated in Suzuki-Miyaura and Heck cross-coupling reactions. This catalytic system displayed a greatly improved substrate scope for the carbon–carbon bond formations starting from a wide range of green and economical electrophiles aryl and heteroaryl carbamates and sulfamates via highly efficient method under mild, operationally simple reaction conditions. The synthesized heterogeneous catalyst was also fully characterized by FT-IR, TEM, XRD, DLS, FE-SEM, UV–Vis, EDX, XPS, TGA, NMR, VSM, ICP and elemental analysis techniques. The heterogeneous magnetic nanocatalyst can easily be recovered by an external magnetic field and reused for the next reactions for at least seven times with negligible leaching of catalyst and no substantial decrement in the activity. All these highlights have made the present protocol an interesting, simple and environmentally benign process with low catalyst loading and easy manipulations.     

Copper(II) Schiff Base Complex Immobilized on Superparamagnetic Fe3O4@SiO2 as a Magnetically Separable Nanocatalyst for Oxidation of Alkenes and Alcohols

A new heterogeneous catalyst containing a copper(II) Schiff base complex covalently immobilized on the surface of silica‐coated Fe₃O₄ nanoparticles (Fe₃O₄@SiO₂‐Schiff base‐Cu(II)) was synthesized. Characterization of this catalyst was performed using various techniques. The catalytic potential of the catalyst was investigated for the oxidation of various alkenes (styrene, α‐methylstyrene, cyclooctene, cyclohexene and norbornene) and alcohols (benzyl alcohol, 3‐methoxybenzyl alcohol, 3‐chlorobenzyl alcohol, benzhydrol and n ‐butanol) using tert ‐butyl hydroperoxide as oxidant. The catalytic investigations revealed that Fe₃O₄@SiO₂‐Schiff base‐Cu(II) was especially efficient for the oxidation of norbornene and benzyl alcohol. The results showed that norbornene epoxide and benzoic acid were obtained with 100 and 87% selectivity, respectively. Moreover, simple magnetic recovery from the reaction mixture and reuse for several times with no significant loss in catalytic activity were other advantages of this catalyst     

Immobilized manganese porphyrin on functionalized magnetic nanoparticles via axial ligation: efficient and recyclable nanocatalyst for oxidation reactions

Magnetic nanoparticles (MNPs), Fe₃O₄@SiO₂, have been prepared and functionalized by 3-(chloropropyl)trimethoxysilane and then by imidazole to synthesize Fe₃O₄@SiO₂-Im. The functionalized Fe₃O₄ nanoparticles were used as a support to anchor manganese porphyrin via axial ligation. The prepared catalyst was characterized by elemental analysis, FT-IR spectroscopy, X-ray powder diffraction, UV–vis spectroscopy, and scanning electron microscopy. Application of immobilized manganese porphyrin as a heterogeneous catalyst in oxidation of alkenes and sulfides was explored. To find suitable reaction conditions, effect of different parameters such as solvent and temperature on immobilization process and also various reaction parameters (oxidant, solvent, and time) on oxidation reactions has been investigated. The results showed that the immobilized Mn-porphyrin on functionalized MNPs is an efficient and reusable catalyst for oxidation of substrates.     

Hiyama cross‐coupling reaction using Pd(II) nanocatalyst immobilized on the surface of Fe3O4@SiO2

We report a simple process for the synthesis of Fe₃O₄@SiO₂/APTMS (APTMS = 3‐aminopropyltrimethoxysilane) core–shell nanocatalyst support. The new nanocatalyst was prepared by stabilization of Pd(cdha)₂ (cdha = bis(2‐chloro‐3,4‐dihydroxyacetophenone)) on the surface of the Fe₃O₄@SiO₂/APTMS support. The structure and composition of this catalyst were characterized using various techniques. An efficient method was developed for the synthesis of a wide variety of biaryl compounds via fluoride‐free Hiyama cross‐coupling reactions of aryl halides with arylsiloxane, with Fe₃O₄@SiO₂/APTMS/Pd(cdha)₂ as the catalyst under reaction conditions. This methodology can be performed at 100°C through a simple one‐pot operation using in situ generated palladium nanoparticles. High catalytic activity, quick separation of catalyst from products using an external magnetic field and use of water as green solvent are attributes of this protocol.