Stereoselective total synthesis of reveromycin B and C19-epi-reveromycin B

Our studies toward the total synthesis of the reveromycin family of natural products are described herein. Our synthetic approach is efficient, stereocontrolled, and convergent and has resulted in the first synthesis of reveromycin B (4) and C19-epi-reveromycin B (55). Key steps of this successful strategy include: a modified Negishi coupling (construction of C7-C8 bond) and a Kishi-Nozaki reaction (construction of C19-C20 bond), which were employed in the attachment of the target side chains. The key building blocks for the total synthesis were thus defined as vinyl iodide 6, alkyne 7, and alkyne 8. Our synthesis illustrates the utility of the modified Negishi coupling for the construction of complex dienes, confirms the proposed stereochemistry of reveromycins and paves the way for the preparation of designed analogues for biological study.     

DFT calculations on the protonation of two 1,3-butadiyne units fixed in medium-sized rings

The N-bis-protonated forms of 1-azacyclotetradeca-3,5,10,12-tetrayne (19) and 1,8-diazacyclotetradeca-3,5,10,12-tetrayne (20) were used as model systems to study the HCl addition to two 1,3-butadiyne units in close proximity using quantum chemical means. The model calculations were carried out mainly at the B3LYP/3-21G or 6-31G level. The basis set 6-311G was used for single-point calculations. The calculations reveal that 19 and 20 are preferably protonated at the C4 center accompanied by a transannular ring closure between C3 and C13 yielding the bicyclic systems 23 and 24, respectively. Further stabilization of these vinyl cations is achieved by a second transannular ring closure between C6 and C10 leading to the 5-8-5 tricyclic systems 27 and 28, which are further stabilized by the addition of a chloride anion. The different regiochemistry experimentally observed for 13b and 16b was rationalized by calculating local softness parameters. The observed product selectivities for the formation of 14b and 15b were traced back to the relative stabilities of the primary protonation products 23 and 24, respectively. Model calculations on 1-azacyclopentadeca-3,5,11,13-tetrayne (65) and 1-azacyclohexa-deca-3,5,12,14-tetrayne (66) as examples for medium-sized rings with nonparallel 1,3-butadiyne units revealed a concerted process of protonation and C3-C15 (65) or C3-C16 (66) ring closure. The second step is the formation of an aromatic central ring as a result of a ring closure between C6-C13 and C6-C14, respectively.     

Total synthesis of the marine sponge metabolites (+)-rottnestol, (+)-raspailol A and (+)-raspailol B

The asymmetric syntheses of (+)-rottnestol (1) and the related marine sponge metabolites (+)-raspailols A (5) and B (6) are described. The key step in each of these sequences was a Stille coupling to form the C9-C10 sp2-sp2 bond and connect the polyene sidechains to the appropriate optically active tetrahydropyran core. For rottnestol (1), both C12 epimers were synthesised by a coupling between stannane 7 and (R)- or (S)-8 followed by acid hydrolysis which allowed for the assignment of the absolute configuration at the remote C12 stereocentre as R upon comparison of chiroptical data of the synthetic material with that reported for the natural product. In accord with this, (12R)-raspailol A (5) was synthesised from stannane 7 and sidechain 9 and this compound also compared well with the data for natural material including sign and absolute value of the specific rotation. Finally, the same C12 epimer of raspailol B (6) was secured via a union between stannane 10 and iodide 9 and this also possessed a similar rotation to that described for the natural product. Thus, all three compounds appear to possess the (12R) configuration, while that of the core tetrahydropyran ring is the same as proposed originally.     

C-F or C-H bond activation and C-C coupling reactions of fluorinated pyridines at rhodium: synthesis, structure and reactivity of a variety of tetrafluoropyridyl complexes

Reactions of [RhH(PEt3)3] (1) or [RhH(PEt3)4] (2) with pentafluoropyridine or 2,3,5,6-tetrafluoropyridine afford the activation product [Rh(4-C5NF4)(PEt3)3] (3). Treatment of 3 with CO, 13CO or CNtBu effects the formation of trans-[Rh(4-C5NF4)(CO)(PEt3)2] (4a), trans-[Rh(4-C5NF4)(13CO)(PEt3)2] (4b) and trans-[Rh(4-C5NF4)(CNtBu)(PEt3)2] (5). The rhodium(III) compounds trans-[RhI(CH3)(4-C5NF4)(PEt3)2] (6a) and trans-[RhI(13CH3)(4-C5NF4)(PEt3)2] (6b) are accessible on reaction of 3 with CH3I or 13CH3I. In the presence of CO or 13CO these complexes convert into trans-[RhI(CH3)(4-C5NF4)(CO)(PEt3)2] (7a), trans-[RhI(13CH3)(4-C5NF4)(CO)(PEt3)2] (7b) and trans-[RhI(13CH3)(4-C5NF4)(13CO)(PEt3)2] (7c). The trans arrangement of the carbonyl and methyl ligand in 7a-7c has been confirmed by the 13C-13C coupling constant in the 13C NMR spectrum of 7c. A reaction of 4a or 4b with CH3I or 13CH3I yields the acyl compounds trans-[RhI(COCH3)(4-C5NF4)(PEt3)2] (8a) and trans-[RhI(13CO13CH3)(4-C5NF4)(PEt3)2] (8b), respectively. Complex 8a slowly reacts with more CH3I to give [PEt3Me][Rh(I)2(COCH3)(4-C5NF4)(PEt3)](9). On heating a solution of 7a, the complex trans-[RhI(CO)(PEt3)2] (10) and the C-C coupled product 4-methyltetrafluoropyridine (11) have been obtained. Complex 8a also forms 10 at elevated temperatures in the presence of CO together with the new ketone 4-acetyltetrafluoropyridine (12). The structures of the complexes 3, 4a, 5, 6a, 8a and 9 have been determined by X-ray crystallography. 19F-1H HMQC NMR solution spectra of 6a and 8a reveal a close contact of the methyl groups in the phosphine to the methyl or acyl ligand bound at rhodium.     

C-F activation of fluorinated arenes using NHC-stabilized nickel(0) complexes: selectivity and mechanistic investigations

The reaction of [Ni2((i)Pr2Im)4(COD)] 1a or [Ni((i)Pr2Im)2(eta(2)-C2H4)] 1b with different fluorinated arenes is reported. These reactions occur with a high chemo- and regioselectivity. In the case of polyfluorinated aromatics of the type C6F5X such as hexafluorobenzene (X = F) octafluorotoluene (X = CF3), trimethyl(pentafluorophenyl)silane (X = SiMe3), or decafluorobiphenyl (X = C6F5) the C-F activation regioselectively takes place at the C-F bond in the para position to the X group to afford the complexes trans-[Ni((i)Pr2Im)2(F)(C6F5)]2, trans-[Ni((i)Pr2Im)2(F)(4-(CF3)C6F4)] 3, trans-[Ni((i)Pr2Im)2(F)(4-(C6F5)C6F4)] 4, and trans-[Ni((i)Pr2Im)2(F)(4-(SiMe3)C6F4)] 5. Complex 5 was structurally characterized by X-ray diffraction. The reaction of 1a with partially fluorinated aromatic substrates C6H(x)F(y) leads to the products of a C-F activation trans-[Ni((i)Pr2Im)2(F)(2-C6FH4)] 7, trans-[Ni((i)Pr2Im)2(F)(3,5-C6F2H3)] 8, trans-[Ni((i)Pr2Im)2(F)(2,3-C6F2H3)] 9a and trans-[Ni((i)Pr2Im)2(F)(2,6-C6F2H3)] 9b, trans-[Ni((i)Pr2Im)2(F)(2,5-C6F2H3)] 10, and trans-[Ni((i)Pr2Im)2(F)(2,3,5,6-C6F4H)] 11. The reaction of 1a with octafluoronaphthalene yields exclusively trans-[Ni((i)Pr2Im)2(F)(1,3,4,5,6,7,8-C10F7)] 6a, the product of an insertion into the C-F bond in the 2-position, whereas for the reaction of 1b with octafluoronaphthalene the two isomers trans-[Ni((i)Pr2Im)2(F)(1,3,4,5,6,7,8-C10F7)] 6a and trans-[Ni((i)Pr2Im)2(F)(2,3,4,5,6,7,8-C10F7)] 6b are formed in a ratio of 11:1. The reaction of 1a or of 1b with pentafluoropyridine at low temperatures affords trans-[Ni((i)Pr2Im)2(F)(4-C5NF4)] 12a as the sole product, whereas the reaction of 1b performed at room temperature leads to the generation of trans-[Ni((i)Pr2Im)2(F)(4-C5NF4)] 12a and trans-[Ni((i)Pr2Im)2(F)(2-C5NF4)] 12b in a ratio of approximately 1:2. The detection of intermediates as well as kinetic studies gives some insight into the mechanistic details for the activation of an aromatic carbon-fluorine bond at the {Ni((i)Pr2Im)2} complex fragment. The intermediates of the reaction of 1b with hexafluorobenzene and octafluoronaphthalene, [Ni((i)Pr2Im)2(eta(2)-C6F6)] 13 and [Ni((i)Pr2Im)2(eta(2)-C10F8)] 14, have been detected in solution. They convert into the C-F activation products. Complex 14 was structurally characterized by X-ray diffraction. The rates for the loss of 14 at different temperatures for the C-F activation of the coordinated naphthalene are first order and the estimated activation enthalpy Delta H(double dagger) for this process was determined to be Delta H(double dagger) = 116 +/- 8 kJ mol(-1) (Delta S(double dagger) = 37 +/- 25 J K(-1) mol(-1)). Furthermore, density functional theory calculations on the reaction of 1a with hexafluorobenzene, octafluoronaphthalene, octafluorotoluene, 1,2,4-trifluorobenzene, and 1,2,3-trifluorobenzene are presented.     

Ruthenium-cluster-mediated activation of all bonds of a methyl group of 6,6'-dimethyl-2,2'-bipyridine and 2,9-dimethyl-1,10-phenanthroline: transformation of the latter into a 2-alkenyl-9-methyl-1,10-phenanthroline ligand

The treatment of [Ru3(CO)12] with 6,6'-dimethyl-2,2'-bipyridine (Me2bipy) or 2,9-dimethyl-1,10-phenanthroline (Me2phen) in THF at reflux temperature gives the trinuclear dihydride complexes [Ru3(mu-H)2(mu3-L1)(CO)8] (L1 = HCbipyMe 1 a, HCphenMe 1 b), which result from the activation of two C-H bonds of a methyl group. The hexa-, hepta-, and pentanuclear derivatives [Ru6(mu3-H)(mu5-L2)(mu-CO)3(CO)13] (L2 = CbipyMe 2 a, CphenMe 2 b), [Ru7(mu3-H)(mu5-L2)(mu-CO)2(CO)16] (L2 = CbipyMe 3 a, CphenMe 3 b), and [Ru5(mu-H)(mu5-C)(mu-L3)(CO)13] (L3 = bipyMe 4 a, phenMe 4 b) can also be obtained by treating 1 a and 1 b with [Ru3(CO)12]. Compounds 2 a and 2 b have a basal edge-bridged square-pyramidal metallic skeleton with a carbyne-type C atom capping the four Ru atoms of the pyramid base. The structures of 3 a and 3 b are similar to those of 2 a and 2 b, respectively, but an additional Ru atom now caps a triangular face of the square-pyramidal fragment of the metallic skeleton. The most interesting feature of 2 a, 2 b, 3 a, and 3 b is that their carbyne-type C atoms were originally bound to three hydrogen atoms in Me2bipy or Me2phen and, therefore, they arise from the unprecedented activation of all three C-H bonds of C-bound methyl groups. The pentanuclear compounds 4 a and 4 b contain a carbide ligand surrounded by five Ru atoms in a distorted trigonal-bipyramidal environment. They are the products of a series of processes that includes the activation of all bonds (three C-H and one C-C) of organic methyl groups, and are the first examples of complexes having carbide ligands that arise from C-bonded methyl groups. The alkenyl derivatives [Ru5(mu5-C)(mu-p-MeC6H4CHCHphenMe)(CO)13] (5 b), [Ru5(mu-H)(mu5-C)(mu-p-MeC6H4CHCHphenMe)(p-tolC2)(CO)12] (6 b), and [Ru5(mu-H)(mu5-C)(mu-PhCHCHphenMe)(PhC2)(CO)12] (7 b) have been obtained by treating 4 b with p-tolyl- and phenylacetylene, respectively. Their heterocyclic ligands contain an alkenyl fragment in the position that was originally occupied by a methyl group. Therefore, these complexes are the result of the formal substitution of an alkenyl group for a methyl group of 2,9-dimethyl-1,10- phenanthroline.     

Synthesis, characterization, and theoretical study of stable isomers of C70(CF3)n (n = 2, 4, 6, 8, 10)

Reaction of C70 with ten equivalents of silver(I) trifluoroacetate at 320-340 degrees C followed by fractional sublimation at 420-540 degrees C and HPLC processing led to the isolation of a single abundant isomer of C70(CF3)n for n = 2, 4, 6, and 10, and two abundant isomers of C70(CF3)8. These six compounds were characterized by using matrix-assisted laser desorption ionization (MALDI) mass spectrometry, 2D-COSY and/or 1D 19F NMR spectroscopy, and quantum-chemical calculations at the density functional theory (DFT) level. Some were also characterized by Raman spectroscopy. The addition patterns for the isolated compounds were unambiguously found to be C1-7,24-C70(CF3)2, C1-7,24,44,47-C70(CF3)4, C2-1,4,11,19,31,41-C70(CF3)6, Cs-1,4,11,19,31,41,51,64-C70(CF3)8, C2-1,4,11,19,31,41,51,60-C70(CF3)8, and C1-1,4,10,19,25,41,49,60,66,69-C70(CF3)10 (IUPAC numbering). Except for the last compound, which is identical to the recently reported, crystallographically characterized C70(CF3)10 derivative prepared by a different synthetic route, these compounds have not previously been shown to have the indicated addition patterns. The largest relative yield under an optimized set of reaction conditions was for the Cs isomer of C70(CF3)8 (ca. 30 mol % of the sublimed mixture of products based on HPLC integration). The results demonstrate that thermally stable C70(CF3)n isomers tend to have their CF3 groups arranged on isolated para-C6(CF3)2 hexagons and/or on a ribbon of edge-sharing meta- and/or para-C6(CF3)2 hexagons. For Cs- and C2-C70(CF3)8 and for C2-C70(CF3)6, the ribbons straddle the C70 equatorial belt; for C1-C70(CF3)4, the para-meta-para ribbon includes three polar hexagons; for C1-7,24-C70(CF3)2, the para-C6(CF3)2 hexagon includes one of the carbon atoms on a C70 polar pentagon. The 10.3-16.2 Hz 7JF,F NMR coupling constants for the end-of-ribbon CF3 groups, which are always para to their nearest-neighbor CF3 group, are consistent with through-space Fermi-contact interactions between the fluorine atoms of proximate, rapidly rotating CF3 groups.     

Synthesis and Structure of 6-(4- Fluorobenzylamino)-3-methylthio-1,5- diphenyl-1H-pyrazolo[3,4-d]pyrimidin-4(5H)-one

1 INTRODUCTION It was reported that the pyrazolopyrimidinone derivatives play a very important role in the bio- chemistry of living cell. Many potential drugs[1～3] and agrochemicals[4, 5] have been modeled on the compound, and the study on derivatives …     

Reaction mechanism of naphthyl radicals with molecular oxygen. 1. Theoretical study of the potential energy surface

Potential energy surfaces (PESs) of the reactions of 1- and 2-naphthyl radicals with molecular oxygen have been investigated at the G3(MP2,CC)//B3LYP/6-311G** level of theory. Both reactions are shown to be initiated by barrierless addition of O(2) to the respective radical sites of C(10)H(7). The end-on O(2) addition leading to 1- and 2-naphthylperoxy radicals exothermic by 45-46 kcal/mol is found to be more preferable thermodynamically than the side-on addition. At the subsequent reaction step, the chemically activated 1- and 2-C(10)H(7)OO adducts can eliminate an oxygen atom leading to the formation of 1- and 2-naphthoxy radical products, respectively, which in turn can undergo unimolecular decomposition producing indenyl radical + CO via the barriers of 57.8 and 48.3 kcal/mol and with total reaction endothermicities of 14.5 and 10.2 kcal/mol, respectively. Alternatively, the initial reaction adducts can feature an oxygen atom insertion into the attacked C(6) ring leading to bicyclic intermediates a10 and a10' (from 1-naphthyl + O(2)) or b10 and b10' (from 2-naphthyl + O(2)) composed from two fused six-member C(6) and seven-member C(6)O rings. Next, a10 and a10' are predicted to decompose to C(9)H(7) (indenyl) + CO(2), 1,2-C(10)H(6)O(2) (1,2-naphthoquinone) + H, and 1-C(9)H(7)O (1-benzopyranyl) + CO, whereas b10 and b10' would dissociate to C(9)H(7) (indenyl) + CO(2), 2-C(9)H(7)O (2-benzopyranyl) + CO, and 1,2-C(10)H(6)O(2) (1,2-naphthoquinone) + H. On the basis of this, the 1-naphthyl + O(2) reaction is concluded to form the following products (with the overall reaction energies given in parentheses): 1-naphthoxy + O (-15.5 kcal/mol), indenyl + CO(2) (-123.9 kcal/mol), 1-benzopyranyl + CO (-97.2 kcal/mol), and 1,2-naphthoquinone + H (-63.5 kcal/mol). The 2-naphthyl + O(2) reaction is predicted to produce 2-naphthoxy + O (-10.9 kcal/mol), indenyl + CO(2) (-123.7 kcal/mol), 2-benzopyranyl + CO (-90.7 kcal/mol), and 1,2-naphthoquinone + H (-63.2 kcal/mol). Simplified kinetic calculations using transition-state theory computed rate constants at the high-pressure limit indicate that the C(10)H(7)O + O product channels are favored at high temperatures, while the irreversible oxygen atom insertion first leading to the a10 and a10' or b10 and b10' intermediates and then to their various decomposition products is preferable at lower temperatures. Among the decomposition products, indenyl + CO(2) are always most favorable at lower temperatures, but the others, 1,2-C(10)H(6)O(2) (1,2-naphthoquinone) + H (from a10 and b10'), 1-C(9)H(7)O (1-benzopyranyl) + CO (from a10'), and 2-C(10)H(7)O (2-benzopyranyl) + O (from b10 and minor from b10'), may notably contribute or even become major products at higher temperatures.     

Synthetic studies of the 18-membered antitumor macrolide, tedanolide. 3. Stereocontrolled synthesis of the C1-C12 part via a synthesis of the C1-C7 fragment by a mismatched but efficient sharpless dihydroxylation and its coupling with the C8-C11 fragment

The C1-C12 part (4) of tedanolide (1) was synthesized starting from methyl (R)-3-hydroxy-2-methylpropionate (11a) via a coupling between the C1-C7 aldehyde (6) and the C8-C11 iodoalkene (7a). For a synthesis of 6, a mismatched but highly efficient Sharpless dihydroxylation of the alpha, beta-unsaturated ester (15) with AD-mix-alpha was successfully applied. Compound 7a was synthesized using hydrozirconation to the alkyne (32).     

Total synthesis of apoptolidin: construction of enantiomerically pure fragments

A general strategy for the total synthesis of the antitumor agent apoptolidin (1) is proposed, and the chemical synthesis of the defined key building blocks (4, 5, 6, 8, and 9) in their enantiomerically pure forms is described. The projected total synthesis calls for a dithiane coupling reaction to construct the C(20)-C(21) bond, a Stille coupling reaction to form the C(11)-C(12) bond, and a Yamaguchi macrolactonization to assemble the macrolide ring, as well as two glycosidation reactions to fuse the carbohydrate units onto the molecule. First and second generation syntheses to the required fragments for apoptolidin (1) are described.     

Novel synthesis of the C1-C15 polyether domain of the thyrsiferol and venustatriol natural products

[formula: see text] A convergent construction of the C1-C15 domain of the thyrsiferol-related natural products has been developed. This involved the separate construction of C1-C7 and C8-C15 fragments, their organochromic-mediated coupling, and subsequent reductive closure of the B ring. This synthetic A-B-C ring construct will be useful for the total synthesis of the biologically active polyether squalenoid natural products, as well as their non-natural analogues.     

N(1)-C(5')-linked dimer hydrates of 5-substituted uracils produced by anodic oxidation in aqueous solution

Electrochemical dimerization reactivity has been studied for 5-substituted uracils (5XU) including thymine (1a: X = Me) and 5-halouracil derivatives (1b: X = F; 1c: X = Cl; 1d: X = Br; 1e: X = I). Upon galvanostatic electrolysis of Ar-saturated aqueous solution 1a underwent anodic oxidation to produce N(1)-C(5')- and N(1)-C(6')-linked dimer hydrates, 1-(6'-hydroxy-5',6'-dihydrothymin-5'-yl)thymine (5a) and 1-(5'-hydroxy-5',6'-dihydrothymin-6'-yl)thymine (6a), as the major products. These N-C-linked dimerizations were accompanied by the formation of novel stereoisomeric C(5)-C(5')-linked dimers (meso isomer: 13a[meso]; racemic isomer: 13a[rac]) with a condensed tetrahydrofuran ring skeleton. Similar electrolyses of 5-fluorouracil (1b) and 5-chlorouracil (1c) also afforded the corresponding N(1)-C(5')-linked dimer hydrates, 1-(5'-fluoro-6'-hydroxy-5',6'-dihydrouracil-5'-yl)-5-fluorouracil (5b) and 1-(5'-chloro-6'-hydroxy-5',6'-dihydrouracil-5'-yl)-5-chlorouracil (5c), respectively, while resulting in neither N(1)-C(6')-linked dimer analogues nor C(5)-C(5')-linked dimers, unlike the reactivity of 1a. In contrast to 1a-c, no dimeric products were obtained from 5-bromouracil (1d) and 5-iodouracil (1e). The present electrochemical method was applicable to the cross-dimerization into N(1)-C(5')-linked heterodimer hydrates composed of binary 5-substituted uracils that occurred in competition with the formation of homodimer hydrates. A mechanism of the N(1)-C(5')-linked dimerization of 1a-c has been proposed, by which allyl-type radical intermediates with limiting mesomeric forms of N(1)-centered and C(5)-centered pyrimidine radicals (2a-c [N(1)]/2a-c [C(5)]) are generated via anodic one-electron oxidation and subsequent deprotonation at N(1) and undergo a head-to-tail coupling.     

Expedient access to the okadaic acid architecture: a novel synthesis of the C1-C27 domain.

A newly designed synthetic entry to the C1-C27 domain of okadaic acid has been developed. This incorporates substantial improvements in the preparations of the key okadaic acid building blocks representing the C3-C8, C9-C14, and C16-C27 portions. The synthesis of the C3-C8 lactone used (R)-glycidol as the origin of the C4 stereogenic center and featured a late-stage optional incorporation of the C7 hydroxyl group. The complementary C9-C14 fragment was synthesized in a concise route from (R)-3-tert-butyldimethylsilyloxy-2-methylpropanal and propargyl bromide. Assembly of the C3-C14 spiroketal-containing intermediate from the constitutent fragments revealed a dramatic effect of C7 functionalization upon spiroketalization efficiency. In contrast, both (9E)- and (9Z)-enones converged readily to the C8 spiroketal upon treatment with acid. Modifications to the central C16-C27 fragment of okadaic acid included the early replacement of benzylic protecting groups by more suitable functionalities to facilitate both the generation of the C15-C27 intermediate and the deprotection of the final products. These modular building blocks were deployed for the synthesis of the C1-C27 scaffold of 7-deoxyokadaic acid. This work demonstrates improvements in the formation of versatile okadaic acid intermediates, as well as a reordering of fragment couplings. This alternative order of coupling was designed to promote the late stage incorporation of nonnatural lipophilic extensions from the C27 terminus.     

Perturbation of conjugation in allylic lithium compounds due to stereochemical control of internal lithium coordination: crystallography, NMR, and calculational studies

Several allylic lithium compounds have been prepared with ligands tethered at C(2). These are with (CH(3)OCH(2)CH(2))(2)NCH(2)-, 6, 1-TMS 5, 1,3-bis(TMS) 8, and 1,1,3-tris(TMS) 9. Allylic lithiums with (CH(3)OCH(2)CH(2))(2)NCH(2)C(CH(3))(2)-, are 10, 1-TMS 11, and 1,3-bis(TMS), 12 compounds with -C(CH(3))(2)CH(2)N-((S)-(2-methoxymethyl)-pyrrolidino) at C(2) 13, 1-TMS 14, and 1,3-bis(TMS) 15. In the solid state, 8-10 and 12 are monomers, 6 and 13 are Li-bridged dimers, and 5 and 7 are polymers. In solution (NMR data), 5, 7-12, 14, and 15 are monmeric, and 6 is a dimer. All samples show lithium to be closest to one of the terminal allyl carbons in the crystal structures and to exhibit one-bond (13)C-(7)Li or (13)C(1)-(7)Li spin coupling, for the former typically ca. 3 Hz and for the latter 6-8 Hz. In every structure, the C(1)-C(2) allyl bond is longer than the C(2)-C(3) bond, and both lie between those for solvated delocalized and unsolvated localized allylic lithium compounds, respectively, as is also the case for the terminal allyl (13)C NMR shifts. Lithium lies 40-70 degrees off the axis perpendicular to the allyl plane at C(1). These effects are variable, so the trend is that the differences between the C(1)-C(2) and C(2)-C(3) bond lengths, (13)delta(3)-(13)delta(1) values, and the (13)C(1)-(7)Li or (13)C-(6)Li coupling constants all increase with decreasing values of the torsional angle that C(1)-Li makes with respect to the allyl plane.     

Total synthesis and structural elucidation of azaspiracid-1. Final assignment and total synthesis of the correct structure of azaspiracid-1

The molecular structure of azaspiracid-1, a neurotoxin isolated from mussels, has been elucidated by total synthesis which also enriched its supplies. The degradatively derived fragments of this marine biotoxin, compounds 5 (EFGHI), 6 (FGHI), and 40 (ABCD), were matched with synthetic materials, thus confirming their structural identities. Based on this detective work, a new structure of azaspiracid-1 (i.e., 1) was proposed and constructed by total synthesis. The final strategy for the total synthesis of azaspiracid-1 featured a dithiane anion (C(21)-C(27) fragment) reacting with a pentafluorophenol ester (C(1)-C(20) fragment) followed by a Stille-type union of an advanced allylic acetate substrate (C(1)-C(27) fragment) with a vinyl stannane as the main coupling processes to assemble the carbon skeleton of the molecule. In addition to the total synthesis of azaspiracid-1 (1), the syntheses of its C(1)-C(20) epimer (2) and of several truncated analogues for biological investigations are described.     

Syntheses and structural characterizations of endo-eta(1)-, exo-eta(1)-, eta(4)-, eta(5)-, and eta(6)-metallaphosphamonocarbaborane complexes derived from a versatile new polyborane ligand: exo-6-R-arachno-6,7-PCB(8)H(12)

Deprotonation of the phosphamonocarbaborane, exo-6-R-arachno-6,7-PCB(8)H(12) (R = Ph 1a or Me 1b), yields exo-6-R-arachno-6,7-PCB(8)H(11)(-), which when reacted with appropriate transition-metal reagents affords new metallaphosphamonocarbaborane complexes in which the metals adopt endo-eta(1), exo-eta(1), eta(4), eta(5), or eta(6) coordination geometries bonded to the formal R-arachno-PCB(8)H(11)(-), R-arachno-PCB(8)H(10)(2-), R-arachno-PCB(8)H(9)(3-), or R-nido-PCB(8)H(9)(-) ligands. The reaction of exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11)(-) (1a-) with Mn(CO)(5)Br generated the eta(1)-sigma product exo-6-[Mn(CO)(5)]-endo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11) (2) having the [Mn(CO)(5)] fragment in the thermodynamically favored exo position at the P6 cage atom. On the other hand, reaction of 1a- with (eta(5)-C(5)H(5))Fe(CO)(2)I resulted in the formation of two products, an eta(1)-sigma complex endo-6-[(eta(5)-C(5)H(5))Fe(CO)(2)]-exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11) (3) having the (eta(5)-C(5)H(5))Fe(CO)(2) fragment attached at the endo-P6 position and an eta(6)-closo complex, 1-(eta(5)-C(5)H(5))-2-(C(6)H(5))-closo-1,2,3-FePCB(8)H(9) (4a). Rearrangement of the endo-compound 3 to its exo-isomer 5 was observed upon photolysis of 3. Synthesis of the methyl analogue of 4a, 1-(eta(5)-C(5)H(5))-2-CH(3)-closo-1,2,3-FePCB(8)H(9) (4b), along with a double-insertion product, 1-CH(3)-2,3-(eta(5)-C(5)H(5))(2)-2,3,1,7-Fe(2)PCB(8)H(9) (6), containing two iron atoms eta(5)-coordinated to a formal R-arachno-PCB(8)H(9)(3-), was achieved by reaction of exo-6-CH(3)-arachno-6,7-PCB(8)H(11)(-) (1b-) with FeCl(2) and Na(+)C(5)H(5)(-). Complexes 4a and 4b can be considered ferrocene analogues, in which an Fe(II) is sandwiched between C(5)H(5)(-) and 6-R-nido-6,9-PCB(8)H(9)(-) anions. Reaction of exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11)(-) (1a-) with cis-dichlorobis(triphenylphosphine)platinum (II) afforded two compounds, an eta(1)-sigma complex with the metal fragment again in the endo-P6 position, endo-6-[cis-(Ph(3)P)(2)PtCl]-exo-6-(C(6)H(5))-arachno-6,7-PCB(8)H(11) (7) and an eta(4)-complex, 7-(C(6)H(5))-11-(Ph(3)P)(2)-nido-11,7,8-PtPCB(8)H(10) (8) containing the formal R-arachno-PCB(8)H(10)(2)(-) anion. The structures of compounds 2, 3, 4a, 4b, 6, 7, and 8 were crystallographically confirmed.     

Synthetic studies of an 18-membered antitumor macrolide, tedanolide. 5. Stereoselective synthesis of the C13-C23 part via condensation of two fragments, C13-C17 and C18-C21, by taking advantage of the 3,4-dimethoxybenzyl protecting group.

An efficient and stereoselective synthesis of the C13-C23 part (8) was achieved starting from methyl (R)- and (S)-3-hydroxy-2-methylpropionates (9) via coupling of the C13-C17 aldehyde (6), prepared by Evans asymmetric aldol reaction, with the C18-C21 iodoalkene (5b) by taking advantage of the 3,4-dimethoxybenzyl protecting group.     

Reactivity of molybdenum and rhenium hydroxo-carbonyl complexes toward organic electrophiles

The hydroxo compounds [Re(OH)(CO)(3)(N-N)] (N-N=bipy, 2 a; Me(2)-bipy, 2 b) were prepared in a biphasic H(2)O/CH(2)Cl(2) medium by reaction of [Re(OTf)(CO)(3)(N-N)] with KOH. In contrast, when anhydrous CH(2)Cl(2) was used, the binuclear hydroxo-bridged compound [[Re(CO)(3)(bipy)](2)(mu-OH)]OTf (3-OTf) was obtained. Compound [Re(OH)(CO)(3)(Me(2)-bipy)] (2 b) reacted with phenyl acetate or vinyl acetate to afford [Re(OAc)(CO)(3)(Me(2)-bipy)] (4) and phenol or acetaldehyde, respectively. The reactions of [Mo(OH)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1), 2 a, and 2 b toward several unsaturated organic electrophiles were studied. The reaction of 1 with (p-tolyl)isocyanate afforded an adduct of N,N'-di(p-tolyl)urea and the carbonato-bridged compound [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(mu-eta(1)(O),eta(1)(O)-CO(3))] (5). In contrast, the reaction of 2 a with phenylisocyanate afforded [Re(OC(O)NHPh)(CO)(3)(bipy)] (6); this results from formal PhNCO insertion into the O-H bond. On the other hand, compounds [Mo[SC(O)NH(p-tolyl)](eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (7), [Re[SC(O)NH(p-tolyl)](CO)(3)(Me(2)-bipy)] (8 a), and [Re[SC(O)NHEt](CO)(3)(Me(2)-bipy)] (8 b) were obtained by reaction of 1 or 2 b with the corresponding alkyl or aryl isothiocyanates. In those cases, RNCS was inserted into the M-O bond. The reactions of 1, 2 a, and 2 b with dimethylacetylenedicarboxylate (DMAD) gave the complexes [Mo[C(OH)-C(CO(2)Me)C(CO(2)Me)-O](eta(3)-C(3)H(4)-Me-2)(CO)(phen)] (9) and [Re[C(OH)C(CO(2)Me)C(CO(2)Me)O](CO)(2)(N-N)] (N-N=bipy, 10 a; Me(2)-bipy, 10 b). The molecules of these compounds contain five-membered metallacycles that are the result of coupling between the hydroxo ligand, DMAD, and one of the CO ligands. The new compounds were characterized by a combination of IR and NMR spectroscopy, and for [[Re(CO)(3)(bipy)(2)(mu-OH)]BF(4) (3-BF(4)), 4, 5, 6, 7, 8 b, 9, and 10 b, also by means of single-crystal X-ray diffraction.     

Synthesis and Crystal Structure of Tetramethyl 4aH-Pyrido [1, 2-a] Quinoline-1,2,3,4-Tetracarboxylate

1 INTRODUCTION Alkaloids and their derivatives are ubiquitous in natural products, and most of those compounds are of biological activities. Therefore, the structure modifi- cation of alkaloids is always the point that organic chemists and medicinal chemists focus on[1~10]. Qui- nolizine ring system is an important kind of alkaloid, which has a nitrogen atom shared by two six-mem- bered rings. Many medicines have quinolizine ring system, such as reserpine[11, 12] and berberine[13]. How- …