Preparation and properties of polyesters and copolyesters based on 4-methyl-2,4-bis (p-hydroxyphenyl)-1-pentene

4-Methyl-2,4-bis (p-hydroxyphenyl)-1-pentene (MBHPP) was prepared from thermal cracking of bisphenol A (BPA). Unsaturated polyesters were synthesized from the polycondensation of MBHPP with diacid chlorides. Three synthetic routes—solution, interfacial, and melt polycondensation—were employed. MBHPP-polyesters with higher molecular weights were obtained by the interfacial polycondensation reaction. During the preparation of MBHPP-polysters, the products usually contain some insoluble gel, which is probably caused by the crosslinking reaction of the vinyl groups of MBHPP in the aqueous NaOH. Thus, a modified interfacial polycondensation method was proposed, in which both of the bisphenol MBHPP and diacid chloride were dissolved in organic phase and then the solution was stirred with an aqueous NaOH solution to promote the polycondensation. This method reduced the time of MBHPP present in the alkali and produced polymers with higher inherent viscosity and lower gel fraction. The effects of some variables, such as the nature of porganic solvents and phase transfer agents and the concentration of reactants, on the modified interfacial polycondensation of MBHPP with the mixture of equal parts of isophthaloyl and terephthaloyl chloride [IPC/TPC (50/50)] were investigated in some detail. Copolyesters of mixed bisphenols of BPA/MBHPP with IPC/TPC (50/50) were also prepared and characterized.     

Thermotropic liquid crystalline polymers with low thermal transitions. I. Low melting thermotropic liquid crystalline homo- and co-polycarbonates

Due to the particular rheological properties of thermotropic liquid crystalline polymers (TLCP), their application for imaging technology has been investigated. The first class of polymers investigated in this study are the thermotropic liquid crystalline polycarbonates prepared from the solution polycondensation of p,p-dihydroxybiphenyl with bischloroformate as the aliphatic flexible spacer. From the variety of bischloroformates employed, smectic TLCP's were generally obtained with the possible presence of a nematic mesostate. The introduction of comonomers such as substituted hydroquinones or bisphenols were found to lower both the melting transitions and mesophasic range of the TLCP. From rheological characterization, the amount of nonmesogenic moieties present in the copolycarbonates were found to correlate with the increase in the melt viscosity of TLCP.     

Reactions of p-Hydroxyphenylphosphine and Functionally Substituted Bis(hydroxymethyl)phosphines with Heterocumulenes

Reactions of p-hydroxyphenylphosphine, bis(hydroxymethyl)(p-hydroxyphenyl)phosphine, and bis(hydroxymethyl)(5-allyl-2-ethoxybenzyl)phosphine with nitrogen-containing heterocumulenes were studied. The competitive reactivity of the phenol, phosphine, and hydroxymethyl groups in these reactions was examined.     

Aromatic-aliphatic copolyesters—II. Various polycondensation processes

Aromatic aliphatic copolyesters, using hydroquinone, resorcinol, 4,4′-dihydroxybiphenyl (DHBP) 2,2 bis(4-hydroxyphenyl)propane and 4,4′-dihydroxydiphenyl sulphone (DHDPS) as bisphenols and ethylene glycol as diol, have been synthesized by interfacial, low temperature and high temperature solution condensation. Relative reactivities of these bisphenols and ethylene glycol have been evaluated by various polycondensation methods at a fixed ratio of bisphenol/glycol. Decrease in the extent of polymerization and viscosity was observed by incorporation of aliphatic diol. Viscosity was also influenced by the chemical structure of the bisphenol.     

Synthesis and thermal characterization of some novel phenol carbonates

A total of 16 carbonates, all but one new compounds, have been synthesized. These include bis-(phenyl carbonate)s of 13 bisphenols and 3 bis(substituted phenyl carbonate)s of 2,2-bis(p-hydroxyphenyl) butane. The present report characterizes them in terms of melting points T_m, elemental analyses, glass transition temperatures T_g, and enthalpies and entropies of fusion and relates the thermal properties to structure on a comparative basis. A number of the carbonates have what seem to be two distinct crystal structures as deduced from differential scanning calorimetry and x-ray patterns. In keeping with data for polycarbonates, these bis(phenyl carbonate)s show abnormally high T_g/T_m relative to most polymers.     

Synthesis and Properties of Phosphorus-Containing Aromatic Polyethers

The phosphorus-containing aromatic polyethers were prepared from bis(p-chlorophenyl)phenylphosphine oxide (BCPO) with the sodium salt of several bisphenols by high temperature solution polycondensation. The best result (yield 84%, n _sp /c = 0.15) was obtained from BCPO with bisphenol A (BPA) in dimethyl sulfoxide. However, the polymerization in the solvents such as N, N′-dimethyl-2-pyrrolidone, hexamethylphosphoramide, and N,N′-dimethylformamide, and the polymerization with the other bisphenols HO-C₆H₄-X-C₆H₄?OH, where X = CO, S0₂, CH₃P(O), C₆H₅P(O) in place of BPA gave gumlike polymers. The polymer prepared from BCPO and BPA did not decompose up to ca. 300°C under air or nitrogen atmosphere, but it decomposed slowly at 300–520°C, and decomposed rapidly at 520–540°C. The activation energy (δE) for the maximum rate of weight loss was 47.8 kcal/mole.     

Preparation of phosphorus-containing polymers—XX. Synthesis of phenoxaphosphine-containing polyesters

New polyesters containing phenoxaphosphine rings were prepared from 2,8-dichloroformyl-10-phenylphenoxaphosphine 10-oxide (I) and bisphenols by interfacial polycondensation. The investigations of polymerization conditions using (I) and bisphenol A showed that addition of quarternary ammonium salts was effective in the preparation of polyesters. The highest viscosities were obtained when tetrabutylammonium chloride was used as accelerator. Some of the resulting polyesters had reduced viscosities of 0.85–1.92 dl/g in DMA of m-cresol and they dissolved in chloroform, m-cresol and nitrobenzene. These polymers melted in the range of 288–355′, hardly degraded below 400′ and were self-extinguishing. They appeared to have better thermal stability than linear open-chain phosphorus-containing polyesters.     

Sulfur-containing polymers. X. Aromatic poly(sulfenyl thiocarbonates)

Aromatic poly(sulfenyl thiocarbonates) have been synthesized by the interfacial polycondensation of bis(dithiocarbonyl chlorides) with bisphenols. Bisphenols having the hydroxyl groups on separate rings gave polymers in high yields. The inherent viscosities of the polymers ranged from 0.22 to 0.51. In general, they were soluble in chloroform, sym-tetrachloroethane, hexamethylphosphoramide, m-cresol, and dimethylformamide and formed transparent tough films on evaporation of chloroform solutions. Almost all of the polymers were amorphous and gave melt-spun fibers. The polymer films decomposed upon ultraviolet irradiation with liberation of carbonyl sulfide.     

Flame-retardant polyurethanes from phosphorus-containing isocyanates

Phosphorus-containing polyurethanes are synthesized by reacting phosphorus-containing diisocyanates, bis (4-isocyanatophenoxy) phenyl phosphine oxide (BIPPO) and bis (3-isocyanatophenyl) phenyl phosphine oxide (BIPPPO), with various diols. The chemical structures of the obtained monomers and polymers are characterized by IR, ¹H- and ³¹P-NMR spectroscopy. Thermal analysis of the phosphorus-containing polyurethanes reveals that incorporating phosphorus into the polymers increases exothermicity during their decomposition. According to these results, the phosphorus-containing polyurethanes are less thermally stable than conventional polyurethanes. Char yield and LOI measurements demonstrate that incorporating phosphorus into polyurethanes markedly improves their flame retardancy. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1769–1780, 1997     

Preparation and properties of fluorine-containing polyarylates from tetrafluoroisophthaloyl chloride and bisphenols

Fluorine-containing polyarylates having inherent viscosities of 0.2–0.8 dL/g were prepared from tetrafluoroisophthaloyl chloride and various bisphenols by low temperature solution polycondensation in chloroform with triethylamine or by two-phase polycondensation in a dichloromethane-water or nitrobenzene-water system with benzyltriethylammonium chloride as the phase transfer catalyst. These polyarylates were amorphous and were readily soluble in various solvents, including chloroform and N-methyl-2-pyrrolidone. The glass transition temperature of the polymer derived from 2,2-bis(4-hydroxyphenyl) propane was 150°C. These polyarylates started to lose weight around 350°C in an air or nitrogen atmosphere.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Crosslinked polymers containing adamantane groups

Diglycidyl ethers of 1,3-bis-(p-hydroxyphenyl)adamantane (BHPA) and 3,3'-bis-(p-hydroxyphenyl)-1,1'-biadamantane (BHPBA) were prepared and condensed with m-phenylenediamine and methyl tetrahydrophthalic anhydride to give polymers with good high temperature mechanical properties and good oxidative stability. These bisphenols were also condensed with formaldehyde to give phenolic resins containing adamantane moieties.     

Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: Synthesis,characterization and gas permeation study

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430?g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10% weight loss temperatures and glass transition temperatures of polyesters were in the range 453–485?°C and 201–267?°C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H₂ and N₂ by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.     

Synthesis, characterization and thermal degradation of functional benzoxazine monomers and polymers containing phenylphosphine oxide

Three phosphorus-containing bisphenol compounds, bis(4-hydroxyphenyl)phenylphosphine oxide (BHPPO), bis(4-hydroxyphenoxyphenyl)phenylphosphine oxide (BPPPO), and bis(4-hydroxyphenoxy)phenylphosphine oxide (BPHPPO) have been synthesized as starting materials for the synthesis of benzoxazine monomers. Benzoxazine monomers containing phenylphosphine oxide have been prepared and subsequently characterized by FT-IR and ¹H NMR. The monomers are thermally initiated and polymerized via ring-opening polymerization. Thermogravimetric analysis indicates that phosphorylation can have a profound effect on increasing char yield and on thermal degradation temperatures.     

Preparation of polyaryl esters by a new direct polycondensation reaction with arylsulfonyl chlorides in pyridine

Arylsulfonyl chlorides were successfully used as a new condensing agent for the synthesis of polyaryl esters by the direct polycondensation of aromatic dicarboxylic acids and bisphenols. High-molecular-weight polymers (M_w = 84,000) were prepared by reacting dicarboxylic acids with the sulfonyl chlorides in pyridine in the presence of LiCI, followed by treating with a pyridine solution of bisphenols. The polycondensation was significantly affected by factors, such as, the kind of arylsulfonyl chlorides, its amount, the conditions of initial reaction of the acids with the sulfonyl chlorides, the amounts of LiCI added, and dropwise addition of bisphenols.     

Phenazasiline-containing polyamides and polyesters

A Phenazasiline ring was incorporated into a polymer backbone by polycondensation of 2,8-dichloroformyl-5,10-dihydro-5-methyl-10,10-diphenylphenazasiline (V) with aromatic diamines or bisphenols, and phenazasiline-containing polyamides and polyesters were obtained. The polyamides were prepared by low-temperature solution polycondensation in N-methyl-2-pyrrolidone (NMP) in the presence of lithium chloride. The polyesters were synthesized by interfacial polycondensation in a mixture of 1,2-dichloroethane and aqueous alkali in the presence of tetrabutylammonium chloride as an accelerator. These reaction conditions gave the corresponding polymers with high viscosities. The phenazasiline-containing polyamides exhibited good solubilities in polar aprotic solvents such as dimethylformamide, dimethylacetamide, and NMP, and also in m-cresol, although the polyesters showed limited solubilities in organic solvents. Under nitrogen, the phenazasiline-containing polyamides and polyesters showed little degradation below 400°C and had good heat resistance.     

Synthesis and properties of phosphorus polyesters with systematically altered phosphorus environment

Monomers with phosphorus-containing substituents were incorporated into aromatic-aliphatic polyesters to develop polymeric halogen-free flame retardants as additives for poly(butylene terephthalate) (PBT). They were built into the polyester backbone of PBT substituting 1,4-butane diol as monomer by phosphorus-containing aromatic-aliphatic diols. Starting from 10-(2,5-bis(2-hydroxyethoxy)phenyl)-9,10-dihydro-9-oxa-10-phospha-phenanthrene-10-oxide (DOPO-HQ-GE), the chemical structure of the phosphorus monomers was systematically varied resulting in new polymers with diphenyl phosphine oxide substituents and bridged phosphine oxide units. The polymers were prepared by transesterification polycondensation in the melt in lab-scale as well as in a 2.4 l-autoclave. The properties of the polyesters were determined and compared to the DOPO-based polyester with respect to the achieved molar mass and polydispersity, solid state structure, glass transition temperature, thermal stability and combustion behavior.It was found that the different phosphorus substituents lead to different glass transition temperatures. The polymers containing bridged phosphorus structural units showed higher glass transition temperatures T_g and resulted in higher char yields after thermal decomposition. Both phosphine oxide structures showed only one-step decomposition with a shoulder at the end of the step. In contrast, two separate steps were observed in the polyesters with DOPO-substituents. The results indicated that the phosphorus polyesters under discussion are suitable to adjust the flame retarding mechanism.     

Synthesis and characterization of new cardo polyesters

New phthalide-containing bisphenols, phenolphthalein-N-(3-methylanilide) (3-PMA), and phenolphthalein-N-(4-methylanilide) (4-PMA), were synthesized from phenolphthalein and m- and p-toluidines. These bisphenols were polycondensed with terephthaloyl chloride (TPC) using an interfacial or solution polymerization technique to yield new polyesters. Copolymers were also obtained by utilizing different molar proportion of phenolphthalein (PPH) and 3-PMA or 4-PMA with TPC. The polymers prepared by solution polymerization were obtained in 93–99% yields and showed reduced viscosities in the range 0.37–0.83 dL/g. They were readily soluble in chlorinated hydrocarbons and aprotic polar solvents. The polyesters showed glass transition temperatures in the range 261–300°C as measured by DSC. Thermogravimetric analysis of the polyesters indicated no weight loss below 408°C under N₂ atmosphere. Structure–property correlations among these cardo polyesters have been discussed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3227–3234, 1997     

Synthesis and characterization of new aromatic poly(amide-imide)s derived from bis(3-trimellitimidophenyl) phenyl phosphine oxide and various aromatic diamines

New aromatic poly(amide-imide)s with high inherent viscosities were prepared by direct polycondensation reaction of diimide-diacid (I) and aromatic diamines using triphenyl phosphite in N-methyl-2-pyrrolidone (NMP)/pyridine solution containing dissolved CaCl₂. The bis(3-trimellitimidophenyl) phenyl phosphine oxide (I) was readily obtained by the condensation reaction of bis(3-aminophenyl) phenyl phosphine oxide (BAPPO) with trimellitic anhydride. The resulting poly(amide-imide)s showed high thermostability. Their decomposition temperatures at 10% weight loss in nitrogen atmosphere were above 532 °C and the anaerobic char yield at 800 °C ranged from 56% to 74%. Almost all the poly(amide-imide)s showed high glass transition temperature above 233 °C by differential scanning calorimetry (DSC) measurements. These polymers were readily soluble in various organic solvents and by their casting into transparent, tough and flexible films can be easily achieved.     

Biodegradable polymers based on renewable resources. IX. Synthesis and degradation behavior of polycarbonates based on 1,4:3,6‐dianhydrohexitols and tartaric acid derivatives with pendant functional groups

Novel polycarbonates, with pendant functional groups, based on 1,4:3,6‐dianhydrohexitols and L ‐tartaric acid derivatives were synthesized. Solution polycondensations of 1,4:3,6‐dianhydro‐bis‐O‐(p‐nitrophenoxycarbonyl)hexitols and 2,3‐di‐O‐methyl‐L ‐threitol or 2,3‐O‐isopropylidene‐L ‐threitol afforded polycarbonates having pendant methoxy or isopropylidene groups, respectively, with number average molecular weight (M_n) values up to 3.6₁ × 10⁴. Subsequent acid‐catalyzed deprotection of isopropylidene groups gave well‐defined polycarbonates having pendant hydroxyl groups regularly distributed along the polymer chain. Differential scanning calorimetry (DSC) demonstrated that all the polycarbonates were amorphous with glass transition temperatures ranging from 57 to 98 °C. Degradability of the polycarbonates was assessed by hydrolysis test in phosphate buffer solution at 37 °C and by biochemical oxygen demand (BOD) measurements in an activated sludge at 25 °C. In both tests, the polycarbonates with pendant hydroxyl groups were degraded much faster than the polycarbonates with pendant methoxy and isopropylidene groups. It is noteworthy that degradation of the polycarbonates with pendant hydroxyl groups was remarkably fast. They were completely degraded within only 150 min in a phosphate buffer solution and their BOD‐biodegradability reached nearly 70% in an activated sludge after 28 days. The degradation behavior of the polycarbonates is discussed in terms of their chemical and physical properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3909–3919, 2005